Académique Documents
Professionnel Documents
Culture Documents
Electrical Characteristics
Frequency bands 870-960 MHz
Polarization Vertical
Horizontal beamwidth 360
Vertical beamwidth 7
Gain 10.0 dBd (12.1 dBi)
Electrical downtilt (X) 1.25, 3, 5
Impedance 50
VSWR 1.43:1
Null fill 5% (-26.02 dB)
Input power 500 W
Lightning protection Direct Ground
Connector(s) 1 Port / EDIN or NE / Female / Bottom
Mechanical Characteristics
Dimensions Length x Diameter 3393 x 65 mm 134.0 x 2.6 in
Radome length 2893 mm 114.0 in
Support pipe Length X Diameter 500 x 70 mm 19.7 x 2.8 in
Support pipe material Aluminum alloy
Weight without mounting brackets 12 kg 27.0 lbs
Survival wind speed >201 km/hr >125 mph
Wind area 0.22 m2 2.4 ft2
Wind load @ 161 km/hr (100 mph) 326 N 73 lbf
Mounting Options Part Number Fits Pipe Diameter Weight
Standard Mounting Bracket Kit 36312000 50-160 mm 2.0-6.3 in 8.2 kg 18 lbs
Offset Mounting Bracket Kit 36413001 50-160 mm 2.0-6.3 in 7.7 kg 17 lbs
Downtilt Bracket Kit Antenna cannot be mechanically downtilted
Inverted Mounting The BCD-87010-EDIN-X-Invert cannot be mounted in an upright position
Inverted Models The upright model is sold under a different part number: BCD-87010-EDIN-X
90 90 90 90
Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational
conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
1 of 1 www.amphenol-antennas.com REV051711