Académique Documents
Professionnel Documents
Culture Documents
ABSTRACT
Table of Contents
Acknowledgements
Table of Contents 2
List of Figures
List of Tables
Glossary
Chapter 1
Introduction 1
1.1 2
1.2 3
Chapter 2
Methodology 6
2.1 7
Chapter 3
Hardware Implementation 10
3.1 11
Chapter 4
Software Implementation 10
4.1 11
.Chapter 5
Results 15
5.1 17
Chapter 6
Conclusion 20
References 25
Appendices (if any) 28
Appendix A (if any) 30
Appendix B (if any) 32
Appendix C Publications (if any) 36
CHAPTER 1
INTRODUCTION
(The introduction part will include the brief introduction about the project to
be developed, technology used, field of project (if specialized one), any
special technical terms about the project.)
1.1 Introduction
1.2 Objective
Chapter 2
METHODOLOGY
2.1 Introduction
2.2 Block Diagram
Explanation of block diagram (referring to block diagram should be
done as Fig. 2.1; .)
Note 1: Figures to be labeled and the numbers should be given as Fig. 2.1; Fig 2.2 below the
figure. These figures have to be referred in the text as : is discussed in Fig.
2.
Note 2: Tables should be labeled and the numbers should be given as Table 2.1; Table 2.2 ; and
so on. The labeling should be above the table and these labels are to be referred in the text as :
is discussed in Table 2.
Chapter 3
HARDWARE IMPLEMENTATION
Hardware used for the implementation of the mini project. Explanation in detail.
3.1 Introduction
3.2 Circuit Diagram
Note 1: Figures to be labeled and the numbers should be given as Fig. 3.1; Fig 3.2 below the
figure. These figures have to be referred in the text as : is discussed in Fig. 3.1;
.
Note 2: Tables should be labeled and the numbers should be given as Table 3.1; Table 3.2 ; and
so on. The labeling should be above the table and these labels are to be referred in the text as :
is discussed in Table 3.1 ; .
Chapter 4
SOFTWARE IMPLEMENTATION
Software used for the implementation of the mini project. Explanation in detail.
4.1 Introduction
4.2 Software Tool Used
Note 1: Figures to be labeled and the numbers should be given as Fig. 4.1; Fig 4.2 below the
figure. These figures have to be referred in the text as : is discussed in Fig. 4.1;
.
Note 2: Tables should be labeled and the numbers should be given as Table 4.1; Table 4.2 ; and
so on. The labeling should be above the table and these labels are to be referred in the text as :
is discussed in Table 4.1 ; .
Chapter 5
RESULTS
(Paste the snapshot of the simulation results; Multiple Snapshots can be pasted to represent stage
wise output if possible. An example is shown below)
Fig. 5.1 .
Note 1: Figures to be labeled and the numbers should be given as Fig. 5.1; Fig 5.2 below the
figure. These figures have to be referred in the text as : is discussed in Fig. 5.1;
.
Note 2: Tables if any should be labeled and the numbers should be given as Table 5.1; Table
5.2 ; and so on. The labeling should be above the table and these labels are to be referred in the
text as : is discussed in Table 5.1 ; .
Chapter 6
CONCLUSION
REFERENCES
(List all the papers, website, books used for the miniproject in this format as given below and
ensure all the references should be cited in the report)
[1] K. Toyama, J. Krumm, B. Brumitt, and B. Meyers, Wallflower: principles and practice of
background maintenance, in Proc. 7th IEEE Conf. Computer Vision, 1999, vol. 1, pp. 255261.