Académique Documents
Professionnel Documents
Culture Documents
Question Questions
No.
1. Sands are graded according to their
a. Source of origin
b. clay content and grain size
c. Permeability
d. moisture content
2. The maximum quantity of moisture in moulding sand could be
a. 2%
b. 4%
c. 8%
d. 12%
3. The purpose of chaplet is to
a. Ensure directional solidification
b. Provided efficient venting
c. Support the core
d. join upper and lower part of the mould box
4. The following gate is commonly used
a. Top
b. bottom
c. parting
d. step
5. Least shrinkage allowance is provided in the case of following
a. Brass
b. Aluminium
c. Cast iron
d. Steel
6. Carburettors are made by
a. Die casting
b. investment casting
c. shell moulding
d. centrifugal casting
7. Toughness of sand is measured by
a. Shatter test
b. Scleroscope
c. scratch test
d. depth penetration test
8. For drilling holes in a long strip, use
a. Channel jig
b. plate jig
c. leaf jig
d. box jig