Académique Documents
Professionnel Documents
Culture Documents
HUAWEI
Trial Sites
2600MHz band:
- Band width : 20MHz
UL from 2530 2550 MHz
DL from 2650 2670 MHz
Page 2
HUAWEI TECHNOLOGIES CO., LTD.
Two ways
Inter-working Overview One way
Idle Mode- Cell Reselection Connected Mode- Voice Connected Mode- Data
LTE with higher priority
In idle mode, UE prefer camping on 4G, otherwise prefer camping on 3G U2100 or U900, last to 2G. UE in 3G will always try to reselect
to 4G, and UE in 2G will always try to reselect to 3G or 4G ( if UE support).
UE reselect from 4G to 3G, UE on 4G setup CS service will CSFB to 3G U2100 F1 or U900. (LTE Macro cell CSFB to UMTS F1/ U900,
LTE IBS cell CSFB to UMTS F3)
Page 3
HUAWEI TECHNOLOGIES CO., LTD.
LTE Parameter - Idle Mode Cell Reselection (LTE coverage center)
Priority RAT Reselection from LTE to UMTS: (Coverage based)
7 Reserved UE will start to measure UMTS signal when: LTE signal < -110dBm
6 L2600
UE will reselect to UMTS when: LTE signal < -114dBm & UMTS signal > -103dBm, The signal
conditions need to maintenance for 1 second.
5 L1800
Reselection from LTE to GSM: (Coverage based)
4 Reserved
UE will start to measure UMTS signal when: LTE signal < -110dBm
3 U2100
UE will reselect to UMTS when: LTE signal < -114dBm & GSM signal > -101dBm, The signal
2 U900
conditions need to maintenance for 1 second.
1 G900\1800
Page 4
HUAWEI TECHNOLOGIES CO., LTD.
LTE Parameter - Idle Mode Cell Reselection (LTE coverage border)
Priority RAT Reselection from LTE to UMTS: (Coverage based)
7 Reserved UE will start to measure UMTS signal when: LTE signal < -102dBm
6 L2600
UE will reselect to UMTS when: LTE signal < -106dBm & UMTS signal > -100dBm, The signal
conditions need to maintenance for 1 second.
5 L1800
Reselection from LTE to GSM: (Coverage based)
4 Reserved
UE will start to measure UMTS signal when: LTE signal < -102dBm
3 U2100
UE will reselect to UMTS when: LTE signal < -106dBm & GSM signal > -101dBm, The signal
2 U900
conditions need to maintenance for 1 second.
1 G900\1800
Page 5
HUAWEI TECHNOLOGIES CO., LTD.
LTE Parameter - Idle Mode Cell Reselection
Scenario Parameter MML Setting Remark
CellReselPriority 5/6 Cell reselection priority(L1800-5/L2600-6)
SNonIntraSearchCfgInd CFG
CELLRESEL Start measurement,
SNonIntraSearch 9, border cell 13 QRxLevMin*2+SNonIntraSearch*2=-128+9*2=-110
L2GU
ThrshServLow 7, border cell 11
QRxLevMin -64
CELLSEL
QQualMin -18
CellReselPriorityCfgInd CFG
CellReselPriority 3 Cell reselection priority
TreselUtran CELLRESELUTRAN 1
CellReselPriorityCfgInd CFG
CellReselPriority 1 Cell reselection priority
L2G GERANNFREQGROUP
QRxLevMin 0 -115dBm
Reselection
ThreshXlow 7 14dB
TReselGeran CELLRESELGERAN 1
Page 6
HUAWEI TECHNOLOGIES CO., LTD.
LTE Parameter - Connected Mode - Voice CSFB
Scenario Parameter MML Setting
LTE2600/1800
HoModeSwitch:BlindHoSwitch ENODEBALGOSWITCH 1
1. Redirect to LTE
HoModeSwitch:BlindHoSwitch CELLHOPARACFG 1 (fast return)
CSFB
Common 1. When RSCP >-103dBm
REDIRECTION- redirection to U2100 F1/ U900
CSFALLBACKPOLICYCF 2. Redirect to LTE
CsfbHoPolicyCfg 1&CCO_HO- (INTERRATHIGHESTPRI = UTRAN)
G (fast return)
0&PS_HO-0
UMTS F1
HoAlgoSwitch:UtranCsfbSwitch ENODEBALGOSWITCH 1
L2U
CSFB CsfbHoUtranB1ThdRscp -103dBm
CSFALLBACKHO UMTS U900
3. Reselect to LTE
CsfbHoUtranTimeToTrig 40ms 2. Blind redirection to GSM,
if there are no B1 report
HoAlgoSwitch:GeranCsfbSwitch ENODEBALGOSWITCH 1 from UMTS cell
(InterRatSecondPri=GERAN)
L2G
CSFB CsfbHoGeranTimeToTrig 40ms GSM
CSFALLBACKHO
CsfbHoGeranB1Thd -95dBm
Page 7
HUAWEI TECHNOLOGIES CO., LTD.
LTE Parameter - Connected Mode Handover
PS L2U:
1) UE will start to measure UMTS signal when:
LTE signal < (InterRatHoA2ThdRSRP - InterRatHoA1A2Hyst) = -115 - 2*0.5 = -116dBm
The signal condition need to maintain for InterRatHoA1A2TimeToTrig:640ms
2) UE will redirection to UMTS when:
UMTS RSCP > (InterRatHoUtranB1ThdRscp-InterRatHoUtranB1Hyst) = -103+2*0.5 = -102dBm
The signal condition need to maintain for InterRatHoUtranB1TimeToTrig :320ms
Page 8
HUAWEI TECHNOLOGIES CO., LTD.
LTE Parameter - Connected Mode Data Service(Configuration)
L2600/1800:
When RSRP >-111dBm, stop measuring IRAT & inter frequency Neighbor cell RSRP greater than serving by 4dB
When RSRP<-115dBm, start measuring UMTS & GSM& inter frequency
When RSRP<-121dBm, starting the blind redirection.
Page 9
HUAWEI TECHNOLOGIES CO., LTD.
LTE Parameter - Connected Mode Data Service(Configuration)
Scenario Parameter MML Setting Remark
InterRatHoA1A2TrigQuan RSRP
INTERRATHOCOMM
InterRatHoEventType EventB1
INTERRATHOA1A2HYST 2
L2U
INTERRATHOA1A2TIMETOTRIG INTERRATHOCOMMG 640ms
Common ROUP
INTERRATHOA1THDRSRP -111dBm
INTERRATHOA2THDRSRP -115dBm
BlindHoA1A2ThdRsrp CELLHOPARACFG -121dBm
HoModeSwitch:UtranRedirectSwitch ENODEBALGOSWITCH 1
Page 10
HUAWEI TECHNOLOGIES CO., LTD.
UMTS Side Requirement
o Parameter setting
Configure UMTS network priority as 3, Reselection from UMTS to LTE: (Priority based)
UE will always measure LTE signal when camping on UMTS
UE will reselect to LTE when: U2L: LTE signal > -108dBm
o Feature
Below list Huawei UMTS for reference, detail UMTS feature requirement depend on UMTS network vendor.
Feature ID Feature Name Remark
WRFD-020126 Mobility Between UMTS and LTE Phase 1 UL interworking
WRFD-140226 Fast Return from UMTS to LTE U2L fast return
Page 11
HUAWEI TECHNOLOGIES CO., LTD.
GSM Side Requirement
o Reselection from GSM to LTE: (Priority based)
Configure GSM network priority as 1, UE will always measure LTE signal when camping on GSM.
UE will reselect to LTE when: G2L: LTE signal > -108dBm The signal conditions need to maintenance for 0
seconds.
o Feature
Below list Huawei UMTS for reference, detail UMTS feature requirement depend on UMTS network
vendor.
Page 12
HUAWEI TECHNOLOGIES CO., LTD.
LTE Intra-Frequency Reselection and Handover
LTE Intra Reselection
LTE Intra HO
Page 13
HUAWEI TECHNOLOGIES CO., LTD.
LTE 1800 and LTE2600 Inter-working
L2600-20M
Network Information:
1. Frequency bandL1800 as coverage layer, L2600 as capacity layer.
2. CoverageL1800 continue coverage, L2600 only cover hotspot.
3. Site statusL1800 and L2600 co-located, (L2600 not ready)
Page 14
HUAWEI TECHNOLOGIES CO., LTD.
LTE 1800 and LTE2600 Inter-working: Reselection
LTE Parameter MML Setting Remark
QRxLevMin -64 -128dBm
MOD CELLSEL
QQualMin -18 -18dB
SNonIntraSearchCfgInd CFG
Page 15
HUAWEI TECHNOLOGIES CO., LTD.
LTE 1800 and LTE2600 Inter-working: InterFreq Handover
LTE Parameter MML Setting Remark
InterFreqHoA1A2Hyst 2 [0.5dB]
INTERFREQHOGROUP
InterFreqHoA1ThdRsrp -105dBm Stop Inter-Freq measurement
InterFreqHOA4Hyst 2Unit:0.5dB
InterFreqHoA4TimeToTrig 320ms
InterFreqHoEventType EventA4
EUTRANINTERNFREQ
QoffsetFreqConn dB0
Page 16
HUAWEI TECHNOLOGIES CO., LTD.
Thank you
www.huawei.com