Académique Documents
Professionnel Documents
Culture Documents
REIFF Technical Products Shanghai
Industrial Hoses and Fittings
1 2
Manufacture and
machining Product range on
the next pages
Industrial Hoses
Perfect combination, perfect Suction, blower and delivery hoses
further processing Exhaust gas hoses
Suction, blower and delivery hoses,
Whether locally or by telephone we advise hose clamps, -connection parts,
you personally, define your requirements jointly -couplings, -connectors
with you and support you from the product Plastic spiral hoses
selection to the individual further processing to Chemical hoses
the assembly. Steam hoses
Flat hoses
All-round Service Delivery hoses
We not only support you for the selection of
Delivery hose systems
the optimum hose/fitting combination but we
Gas hoses
also machine and refine the selected products
Compensators and corrugated hoses
for you. Cutting to length accurate to the
Foodstuff hoses
millimetre is included in our services as well as
Air hoses
the compilation of complex hose packages and
complete hose systems. Oil and fuel hoses
Hoses without lining
Multi-purpose hoses
Water hoses
Hose bracket systems
Industrial hoses and fittings
Industrial hoses and fittings
Industrial hoses and fittings
Industrial hoses and fittings
Industrial hoses and fittings
/m
Inner diameter Outer diameter Operating pressure Vacuum Bending radius beginning
Item No. mm mm bar / 20C bar / 20C mm at 6 m
/m
Inner diameter Outer diameter Operating pressure Vacuum Bending radius beginning
Item No. mm mm bar / 20C bar / 20C mm at 6 m
Industrial hoses and fittings
CP hoses
CP PE 457
Exhaust and blower hose, PE, super-lightweight and compressible, up to 1.000 mm
Applications: for aggressive solids such as dusts, powders and fibres; for gaseous media
such as vapours and smoke; for air conditioning systems; as a bellows and expansion
joint; for asbestos disposal
Properties: Scuff protection through external clamp profile; good chemical resistance;
odourless and tasteless
Construction: patented CP construction; wall: polyethylene mixed fabric
(LDPE + HDPE); clamp profile: Galvanised steel
Temperature range: ca. -35C to ca. +80C
CP VITON 459 EL
Electrically conductive exhaust and blower hose, VITON <104 , super-lightweight and
compressible, up to 1.000 mm, electrically conductive
Applications: in explosive areas (EX protection); for aggressive solids such as dusts,
powders and fibres; for aggressive gaseous media such as vapours and smoke;
as a bellows and expansion joint; for dust removal and vacuuming systems
Properties: Scuff protection through external clamp profile; good resistance to acids and
bases; good chemical resistance; Resistivity and surface resistance <104 ; meets the
requirements of European ATEX Guideline;
electrically conductive (according to BGR 132, formerly ZH 1/200) for grounding spirals
Construction: patented CP construction;
Wall: Viton - coated polyester fabric; clamp profile: Galvanised steel
Temperature range: ca. -20C to ca. +210C
CP ARAMID 461
High-temperature exhaust and blower hose, silicone, vibration-resistant, very robust,
up to 1.000 mm
Applications: for applications in which non-combustible hoses are prescribed; for solids
such as dusts, powder and reinforcement fibres (tension support); for gaseous media
such as vapours and smoke; for dust removal and vacuuming systems, flue gas, furnace
and welding gas suction; as a bellows and expansion joint
Properties: vibration-resistant; scuff protection through external clamp profile; good
chemical resistance; non-flammable according to: DIN 4102-B1; very robust
Construction: patented CP construction; wall: specially-coated high-temperature fabric;
clamp profile: Galvanised steel
Temperature range: ca. -60C to ca. +260C, short-term up to ca. +300C
Industrial hoses and fittings
CP hoses
CP PTFE/Glas-VA 471
Exhaust and blower hose, TEFLON, two-layered, super-lightweight and compressible,
up to 1.000 mm
Applications: for aggressive solids such as dusts, powders and fibres; for aggressive
gaseous media such as vapours and smoke; as a bellows and expansion joint
for dust removal and vacuuming systems; for the chemical industry
Properties: Scuff protection through external clamp profile; good resistance to acids and
bases; extremely good chemical resistance
Construction: Patented CP construction; wall: inner PTFE film,
specially coated glass fabric; clamp profile: full stainless steel (VA)
Temperature range: ca. -150C to ca. +250C, short-term up to ca. +270C
CP HiTex 480
High-temperature suction hose, super-lightweight, highly flexible and compressible,
up to 1.000 mm
Applications: for applications in which non-combustible hoses are prescribed; for solids
such as dusts, powder and reinforcement fibres (tension support); for gaseous media
such as vapours and smoke; for dust removal and vacuuming systems, flue gas,
furnace and welding gas suction; as a bellows and expansion joint
Properties: Scuff protection through external clamp profile; non-flammable according to
DIN 4102-B1
Construction: patented CP construction; wall: reinforced with stainless steel wires
and specially-coated glass fabric; clamp profile: Galvanised steel
Temperature range: ca. -60C to ca. +400C, short-term up to ca. +450C
CP HiTex 483
High-temperature exhaust and blower hose, multi-layered, robust, insulated,
extremely heat-resistant
Applications: for solids such as dusts, powder and fibres; for gaseous media such as
vapours and smoke; for dust removal and vacuuming systems, flue gas, furnace and
welding gas exhaust; for exhaust gas technology, engine technology and engine
pre-heating; as a bellows and expansion joint
Properties: Scuff protection through external clamp profile; very robust
Construction: patented CP construction; wall: reinforced inside with stainless steel wires
and specially-coated glass fabric, thermal insulation fabric, externally
specially coated glass fabric; clamp profile: full stainless steel (VA)
Temperature range: ca. -60C to ca. +900C, short-term up to ca. +1.100C
Industrial hoses and fittings
Operating Bending /m /m
Inner diameter Outer diameter pressure Vacuum radius beginning beginning
Item No. mm mm bar / 20C bar / 20C mm at 4 m at 12 m
Operating Bending /m /m
Inner diameter Outer diameter pressure Vacuum radius beginning beginning
Item No. mm mm bar / 20C bar / 20C mm at 4 m at 12 m
Industrial hoses and fittings
/m /m /m
Inner diameter beginning beginning beginning
Item No. mm at 1 m at 10 m at 30 m
/m /m
Inner diameter Outer diameter Length Bending radius beginning beginning
Item No. mm mm m mm at 1 m at 10 m
Industrial hoses and fittings
Bending /m
Inner diameter Outer diameter Length Vacuum radius beginning
Item No. mm mm m bar / 20C mm at 15 m
/m /m
Inner diameter Outer diameter Length Vacuum Bending radius beginning beginning
Item No. mm mm m bar / 20C mm at 2.5 m at 10 m
Industrial hoses and fittings
For the different NORRES hoses and their many applications, different fastening options and connection parts are also required.
From simple clamps to heat-shrink sleeves and connecting parts for metal hoses to a solid cast connection part. The accessory indicated
is tailored specifically for the NORRES hoses.
Thus, fit and optimum seal is ensured.
Spiral clamp 212 Grounded spiral clamp 212 Spiral clamp with quick-acting closure 213
Special clamp for fastening externally- Special clamp with integrated grounding Special clamp with quick-acting closure
corrugated spiral hoses. cable or strip for fastening externally- for fastening externally-corrugated spiral
Fits most corrugated spiral hoses. hoses.
AIRDUC, PROTAPE, CP and Fits most AIRDUC hoses and Fits most AIRDUC, PROTAPE, CP
TIMBERDUC hoses. TIMBERDUC 534. and TIMBERDUC hoses.
Spiral clamp with fastening eyelet 217 Sealing clamp 216 Shell strap system
Special clamp with fastening eyelet for Special clamp for water-tight fastening Flow-optimised coupling system
fastening externally corrugated spiral of heavy-duty and externally corrugated for silo vehicles.
hoses. spiral hoses. Fits AIRDUC 356 MHF reinforced
Fits most AIRDUC, PROTAPE, CP and Fits AIRDUC 355 and 356, NW 75 and 100 mm.
TIMBERDUC hoses. as well as TIMBERDUC 534.
Industrial hoses and fittings
CONNECT threaded fittings 242 CONNECT swivel flange 244 CONNECT TRI-Clamp 245
Threaded connection compatible to com- Flange fitting mating flanges according Coupling fitting nozzles according to
mon coupling and connection systems such to DIN 2632/2633, hold pattern according DIN 32676.
as Storz, Perrot, Kamlok, ... to DIN 2501. Fits most AIRDUC,
Fits most AIRDUC, BARDUC and Fits most AIRDUC, BARDUC and BARDUC and TIMBERDUC hoses.
TIMBERDUC hoses. TIMBERDUC hoses.
Heat-shrink sleeves 223 Sheet-metal hose connector/ Connection parts 202 206
To connect hoses together or from hose reducer 270 - 271 Nozzles, flanges and couplings to connect
to nozzle. To connect, reduce and expand hose lines. and fasten metal hoses.
Fits almost all NORRES hoses. Fits almost all NORRES hoses. Fits metal hose 375, 376 and 377.
Industrial hoses and fittings
/m /m /m /m
Inner diameter Wall thickness Vacuum Bending radius beginning beginning beginning beginning
Item No. mm mm bar / 20C mm at 1 m at 30 m at 90 m at 150 m
/m /m /m /m
Inner diameter Wall thickness Vacuum Bending radius beginning beginning beginning beginning
Item No. mm mm bar / 20C mm at 1 m at 50 m at 150 m at 250 m
/m /m /m /m
Inner diameter Wall thickness Vacuum Bending radius beginning beginning beginning beginning
Item No. mm mm bar / 20C mm at 1 m at 30 m at 90 m at 150 m
/m /m /m /m
Inner diameter Wall thickness Vacuum Bending radius beginning beginning beginning beginning
Item No. mm mm bar / 20C mm at 1 m at 10 m at 20 m at 40 m
Industrial hoses and fittings
Operating /m /m /m
Inner diameter Wall thickness pressure Vacuum Bending radius beginning beginning beginning
Item No. mm mm bar / 20C bar / 20C mm at 1 m at 60 m at 240 m
Operating /m /m /m
Inner diameter Wall thickness pressure Vacuum Bending radius beginning beginning beginning
Item No. mm mm bar / 20C bar / 20C mm at 1 m at 30 m at 120m
Operating /m /m /m
Inner diameter Wall thickness pressure Vacuum Bending radius beginning beginning beginning
Item No. mm mm bar / 20C bar / 20C mm at 1 m at 30 m at 90 m
Industrial hoses and fittings
Chemical hoses
Operating Bending /m /m
Inner diameter Wall thickness Outer diameter pressure Vacuum radius beginning beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 1 m at 40 m
Industrial hoses and fittings
Chemical hoses
Operating Bending /m /m
Inner diameter Wall thickness Outer diameter pressure Vacuum radius beginning beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 1 m at 40 m
Industrial hoses and fittings
Chemical hoses
Operating /m /m
Inner diameter Wall thickness Outer diameter pressure Vacuum Bending radius beginning beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 1 m at 40 m
Industrial hoses and fittings
Steam hoses
Operating
pressure /m /m /m /m
Inner diameter Wall thickness Outer diameter bar / 164C beginning beginning beginning beginning
Item No. mm mm mm (saturated steam) at 1 m at 20 m at 40 m at 80 m
Operating
pressure /m /m /m /m
Inner diameter Wall thickness Outer diameter bar / 210C beginning beginning beginning beginning
Item No. mm mm mm (saturated steam) at 1 m at 20 m at 40 m at 80 m
Industrial hoses and fittings
Steam hoses
Steam hose DS 1
Steam hose for conveying saturated steam and hot water.
Successfully tested and used throughout the chemical industry.
Safety factor: Steam 10 : 1, water 3.15 : 1
Core: EPDM, black, smooth, electrically conductive
Lining: Steel wire lining, braided, galvanised
cover: EPDM, black, electrically conducting, material impression
Identification: continuous text label, red:
"SEMPERIT S DS1 Sattdampf/Saturated Steam 210C Sempersteam PN 18 bar R < 10
hoch 6 Ohm and opposite, red-underlined impression according to EN ISO 6134
(for EN dimensions)
Area of application: Steam hose
Reinforcement: Steel wire lining
Material: EPDM
Length: 40 m
Norm: EN ISO 6134:2005
Temperature range: up to +120C (hot water), +210C (saturated steam)
Colour: black
Operating pressure
Wall bar / 210C (saturated Bending /m /m /m
Inner diameter thickness Outer diameter steam), bar / 120C radius beginning beginning beginning
Item No. mm mm mm (hot water) mm at 1 m at 40 m at 80 m
Industrial hoses and fittings
Flat hoses
/m /m /m
Inner diameter Operating pressure beginning beginning beginning
Item No. Nominal dimension mm bar / 20C at 1 m at 60 m at 120 m
Construction and industrial hose complete with installed with Storz couplings
Endless woven hose made of high-strength synthetic fibres with internal rubber lining
Complete with installed Storz couplings.
Area of application: Construction and industrial hose
Design: Completely installed
Reinforcement: Textile braiding
Material: inner: rubber, outer: synthetic fabric
Colour: white
Industrial hoses and fittings
Conveying hoses
Operating /m /m /m
Inner diameter Wall thickness Outer diameter pressure Bending radius beginning beginning beginning
Item No. mm mm mm bar / 20C mm at 1 m at 80 m at 120 m
Conveying hoses
Operating Bending /m /m /m
Inner diameter Wall thickness Outer diameter pressure radius beginning beginning beginning
Item No. mm mm mm bar / 20C mm at 1 m at 20 m at 40 m
Food-silo hose
Food conveying hose for sugar, powder, feed, grains and granulates.
Area of application: Food-silo hose
Reinforcement: Textile lining, copper strand
Material: Core: NR/SBR, cover: SBR
Length: 40 m
Temperature range: ca. -30C to ca. +80C
Colour: Core: bright Cover: black
Industrial hoses and fittings
Thick walled Reinforcing linings Steel spirals Intermediate plate Black cover, CR wear-resistant, SIGMA seal SIGMA coupling
Wear layer made of special cord weather and seawater resistant with reinforcing Impact resistant aluminium
fabric 2 half shells, inner corrugation
Shape matched to the hose
The design guarantees form stability both during pressure and The flange consists of two halves with inner corrugation, which is
during suction and gravity feeding. matched in shape to the surface of the hose. This causes the
Operating pressure: max. 10 bar. connection flange, designed according to DIN 2576, to not come
Safety factor: 3.2:1 (bursting pressure min. 32 bar), into contact with the media at all and thus not be subject to any
Vacuum: max. 9 mWS wear. The hoses are manufactured with thick cores exactly
matched to the respective conveyed medium. For hydraulic
Standard: Flange in DIN PN 10 and ASA 150 designs
conveying of abrasive materials suspended in water, we use
Available on request: a highly elastic wear-resistant, beige natural rubber core. For
Other flange designs, plastic-coated couplings pneumatic conveying, such as sand, cement, lime, phosphate,
(protection against corrosion and chemical attack). broken glass, graphite dust, etc., we use a highly wear-resistant,
black, electrically conductive core mixture. For the transport of
chemicals and other aggressive media, other core mixtures are
available, such as CSM, NBR white or EPDM.
Industrial hoses and fittings
Your problem: Type of conveyance and Our solution: Sigma conveying system Coupling KU 3311
medium
FS 3310 The number of holes can deviate from the
Hydraulic transport of abrasive materials Pure natural rubber, light, wear-resistant information provided in the "Connection
such as lime, bauxite, corundum, dolomite, and elastic; not electrically conducting; Dimensions" table depending on the
ore, feldspar, glass, wood shavings, indus- Hardness 40 5 Shore A, temperature design of the splitting flange. The correct
trial waste, coal, metal dust, nitrate, polish- range -35C/+70C Identification in red splitting angle remains the same.
ing media, quartz sand, carbon black, salt,
clay granulate, uranium, tungsten, cement, FS 3320
gravel, mud, chalk, concrete, etc. Extremely wear-resistant NR/BR composite
polymer, black, antistatic: Hardness 65 5
Pneumatic transport of abrasive materials Shore A, temperature range -35C/+70C
such as cement, casting sand, phosphate, Identification in blue.
quartzite, dolomite, ground glass, dry
mixed feed, grains, cocoa beans, bark, FS 3330
wood shavings, dust in vacuum systems CSM, light, very resistant to inorganic ac-
etc. ids; not electrically conductive;
Hardness 55 5 Shore A, temperature
Hydraulic transport of chemically aggres- range-35C/+95C Identification in green.
sive materials, especially acids and bases
according to the list of resistance values. FS 3340
For questions regarding resistance, etc., Special materials NBR/Semperline, white;
we are always available. Oil-resistant, wear-resistant, antistatic:
hardness 60 5 Shore A, temperature
Pneumatic transport of solid and range-35C/+80C Identification in white.
powdered foods, feeds, silo products,
grains, bright plastic granulates, aggre-
gates, and oil-containing materials, etc.
1 Conveying hose
SIGMA general data 2 couplings KU 3311 & seals DI 3312
FS 3310 FS 3340
DIN EN 10 1092-1 (2576) ASA 150
inner L P* dA %s Rmin M FDIN kDIN zDIN x hDIN FASA kASA zASA x hASA
[mm] [inch] [m] [O/] [mm] [mm] [m] [kg/m] [mm] [mm] [units] [mm] [inch] [inch] [units] [mm]
Industrial hoses and fittings
Gas hoses
189250 for oxygen 6.3 3.5 13.3 20 blue 2.29 1.61 1.38 1.16
187380 for acetylene gas 6 3.5 13 20 red 2.29 1.61 1.38 1.16
187390 for oxygen 6.3 5 16.3 20 blue 2.73 1.91 1.64 1.38
187400 for acetylene gas 9 3.5 16 20 red 2.51 1.76 1.51 1.25
Gas hoses
843790 for oxygen / acetylene gas 6/6 3.5 / 3.5 13 / 13 20 5.68 3.98 3.41 2.84
187410 for oxygen / acetylene gas 6/9 5 / 3.5 16 / 16 20 5.93 4.16 3.55 2.97
/m /m /m
Inner diameter Wall thickness Outer diameter Operating pressure beginning beginning beginning
Item No. mm mm mm bar / 20C at 1 m at 40 m at 120 m
/m
Inner diameter Wall thickness Outer diameter Operating pressure Bending radius beginning
Item No. mm mm mm bar / 20C mm at 40 m
Industrial hoses and fittings
expansion joints
and corrugated hoses
Metal hoses
Metal hoses for highly flexible and permanently sealed lines for conveying liquids,
gases, pumpable solids and to absorb vibrations and oscillations.
Delivery variations:
Metal hoses in single or multiple walled design in materials 1.4404, 1.4541, 1.4571
with braided wire of 1.4301.
Standard nominal diameters DN 4 DN 350
Temperature range ca. -200C to ca. +600C
Operating pressure up to ca. 200 bar
Technical data depends on the respective design.
Industrial hoses and fittings
Foodstuff hoses
Operating /m /m
Inner diameter Wall thickness Outer diameter pressure Bending radius beginning at beginning at
Item No. mm mm mm bar / 20C mm 20 m 40 m
Industrial hoses and fittings
Foodstuff hoses
Operating Bending /m /m
Inner diameter Wall thickness Outer diameter pressure Vacuum radius beginning beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 1 m at 40 m
Industrial hoses and fittings
Foodstuff hoses
Operating
Inner diameter Wall thickness Outer diameter pressure Vacuum Bending radius
Item No. mm mm mm bar / 20C bar / 20C mm /m
Industrial hoses and fittings
Foodstuff hoses
Operating /m
Inner diameter Wall thickness Outer diameter pressure Vacuum Bending radius beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 40 m
Operating /m
Inner diameter Wall thickness Outer diameter pressure Vacuum Bending radius beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 40 m
Foodstuff hoses
Operating /m
Inner diameter Wall thickness Outer diameter pressure Vacuum Bending radius beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 40 m
Industrial hoses and fittings
Foodstuff hoses
/m
Inner diameter Wall thickness Outer diameter Operating pressure Vacuum Bending radius beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 40 m
Foodstuff hoses
Operating pressure
Inner diameter Wall thickness Outer diameter bar / 164C (saturated steam), Bending radius
Item No. mm mm mm bar / 95C (hot water), mm /m
1110460 13 5 23 6, 18 80 13.20
1110470 19 6 31 6, 18 115 17.00
1110480 25 7 39 6, 18 150 22.59
1110490 32 7 46 6, 18 195 28.13
1110500 38 9 56 6, 18 230 37.98
1110510 40 9 58 6, 18 240 39.71
1110520 50 10 70 6, 18 300 52.06
1110530 65 12 89 6, 18 390 76.98
Operating pressure
Inner diam- Wall Outer diam- bar / 164C (saturated Bending /m /m /m /m
eter thickness eter steam), bar / 95C (hot radius beginning beginning beginning beginning
Item No. mm mm mm water) mm at 1 m at 20 m at 40 m at 80 m
Industrial hoses and fittings
Air hoses
Operating /m /m /m /m
Inner diameter Wall thickness Outer diameter pressure beginning beginning beginning beginning
Item No. mm mm mm bar / 20C at 1 m at 40 m at 80 m at 160 m
Operating /m /m
Inner diameter Wall thickness Outer diameter pressure Bending radius beginning beginning
Item No. mm mm mm bar / 20C mm at 40 m at 80 m
Industrial hoses and fittings
Air hoses
Air hoses
Industrial hoses and fittings
Air hoses
/m
Inner diameter Wall thickness Outer diameter Operating pressure Bending radius beginning
Item No. mm mm mm bar / 20C mm at 50 m
Air hoses
Operating /m
Inner diameter Wall thickness Outer diameter pressure Bending radius beginning
Item No. mm mm mm bar / 20C mm Colour at 25 m
Brake hose
Brake hose for compressed air braking systems in motor vehicles.
Cover wear-resistance, ageing and weather-resistant
Area of application: Compressed air brake hose
Reinforcement: Textile lining
Material: EPDM
Length: 40 m
Norm: DIN 74310
Temperature range: ca. -40C to ca- +70C
Colour: black
Industrial hoses and fittings
Air hoses
/m
Inner diameter Wall thickness Outer diameter Operating pressure beginning
Item No. mm mm mm bar / 20C at 40 m
1024340 51 9 69 10 28.07
1065360 65 9 83 10 35.08
1067680 76 9 94 10 40.82
Industrial hoses and fittings
Industrial hoses and fittings
Operating /m
Inner diameter Wall thickness Outer diameter pressure Vacuum Bending radius beginning
Item No. mm mm mm bar / 20C bar / 20C mm at 40 m
/m
Inner diameter Wall thickness Outer diameter Operating pressure Vacuum Bending radius beginning at
Item No. mm mm mm bar / 20C bar / 20C mm 40 m
Industrial hoses and fittings
/m /m /m /m
Inner diameter Wall thickness Outer diameter Length beginning beginning beginning beginning
Item No. mm mm mm m at 1 m at 100 m at 300 m at 500 m
/m /m /m /m
Inner diameter Wall thickness Outer diameter Length beginning beginning beginning beginning
Item No. mm mm mm m at 1 m at 50 m at 150 m at 250 m
Continued
Industrial hoses and fittings
/m /m /m /m
Inner diameter Wall thickness Outer diameter Length beginning beginning beginning beginning
Item No. mm mm mm m at 1 m at 25 m at 75 m at 200 m
Polyamide hose
Compressed air hose with good chemical resistance against oils, greases, fuels, paint
solvents and hydraulic liquids.
low weight
high impact resistance
good resistance to stress-induced cracking
good pressure resistance
very good UV resistance
high wear resistance
not sensitive to water
Area of application: Pneumatic hose
Material: PA 11/12 w
Hardness: ca. 75 Rockwell
Temperature range: ca. -40C to ca. +90C
Industrial hoses and fittings
415680 6 1.0 8 4 19 Both sides 1/4outer threads rotatable blue 26.16 19.64
415690 6 1.0 8 8 19 Both sides 1/4outer threads rotatable blue 57.45 43.09
Polyurethane hose
Compressed air hose with good resistance to oils and greases
low weight
small bending radius
high elasticity
extremely flexible to cold
good damping behaviour
excellent wear-resistance
excellent tear resistance
UV resistant
no embrittlement since there are no plasticisers
Area of application: Pneumatic hose
Material: PUR
Hardness: ca. 98 Shore A
Temperature range: ca. -40C to ca. +85C
Polyethylene hose
Compressed air hose with good resistance against a number of chemicals.
low weight
physiologically compatible (meets recommendation III of the BGA and
FDA Regulation 21 CFR 177.120 c 2.1)
low permeation values for water, water vapour and gases
sterilisable (ethylene oxide and gamma radiation)
good dielectric characteristics
Area of application: Pneumatic hose
Material: LD-PE
Hardness: ca. 45 Shore D
Temperature range: ca. -30C to ca. +70C
Colour: Natural colours
Wall Operating /m /m /m
Inner diameter thickness Outer diameter pressure Bending radius beginning beginning beginning
Item No. mm mm mm bar / 20C mm at 1 m at 300 m at 500 m
PTFE hose
Multi-purpose hose with excellent material properties.
excellent lubricating and anti-adhesion properties
high and wide range of temperature use
very good universal chemical resistance
no water absorption
non-flammable
good electrical and dielectric properties
Area of application: Multi-purpose hose
Material: PTFE
Hardness: ca. 55 Shore D
Temperature range: ca. -200C to ca. +260C
Colour: Natural colours
Operating /m /m /m
Inner diameter Wall thickness Outer diameter pressure Bending radius beginning beginning beginning
Item No. mm mm mm bar / 20C mm at 1 m at 50 m at 100 m
Industrial hoses and fittings
/m /m /m /m
Inner diameter Wall thickness Outer diameter beginning beginning beginning beginning
Item No. mm mm mm at 1 m at 50 m at 100 m at 150 m
/m /m /m /m
Inner diameter Wall thickness Outer diameter beginning beginning beginning beginning
Item No. mm mm mm at 1 m at 40 m at 80 m at 120 m
/m /m /m
Inner diameter Wall thickness Outer diameter beginning beginning beginning
Item No. mm mm mm at 1 m at 50 m at 100 m
Industrial hoses and fittings
Industrial hoses and fittings
Water hoses
Operating Bending /m /m
Inner diameter Wall thickness Outer diameter pressure radius beginning beginning
Item No. mm mm mm bar / 20C mm at 1 m at 40 m
Industrial hoses and fittings
Water hoses
Water hoses
Industrial hoses and fittings
Water hoses
Water hoses
Industrial hoses and fittings
Water hoses
/m
Inner diameter Wall thickness Outer diameter Length Operating pressure beginning at
Item No. mm mm mm m bar / 20C 40 m
Water hoses
Moulded hoses
Ever more complex and narrower installations often make the use
of hoses as open length goods impossible. In order to provide you
with the right hose for these applications, in the moulded hoses
product segment, we work with famous domestic and international
producers. We are able to manufacture moulded hoses according
to your special needs and requirements in a wide variety of
dimensions, materials and designs. Our product spectrum extends
from simple moulded hoses of rubber without fabric linings,
moulded hoses with knitted linings to wound silicone hoses with
multiple Nomex linings. Primarily, our moulded hoses are used by
manufacturers of construction vehicles, as cooler and charge air
hoses in large kitchens and gastronomic enterprises as feed and
drain hoses.
Send us your request with a drawing:
we will immediately submit a free detailed quote.
/m /m /m
Inner diameter Wall thickness Outer diameter Operating pressure beginning beginning beginning
Item No. mm mm mm bar / 20C at 1 m at 40 m at 80 m
/m /m /m
Inner diameter Wall thickness Outer diameter beginning beginning beginning
Item No. mm mm mm at 1 m at 40 m at 80 m
Industrial hoses and fittings
Hose clamps
Hose clamps
/100 units
Tension range Belt width beginning
Item No. mm mm unit at 100 unit
Industrial hoses and fittings
Hose clamps
/100 units
Tension range Belt width beginning at
Item No. mm mm unit 100 unit
Hose clamps
Industrial hoses and fittings
Hose clamps
Hose clamps
Industrial hoses and fittings
Hose clamps
Hose clamps
1080570 17 - 19 18 50 152.20
1067520 19 - 21 18 50 152.20
4163440 21 - 23 18 50 153.30
1049180 23 - 25 18 50 154.30
4072550 25 - 27 18 50 156.40
1049090 27 - 29 18 50 156.40
1049100 29 - 31 18 50 157.50
1049110 31 - 34 18 50 157.50
4163450 34 - 37 18 50 158.50
1049130 37 - 40 18 50 159.60
1049140 40 - 43 18 50 159.60
1049150 43 - 47 20 50 162.70
1049160 47 - 51 20 50 166.90
1049170 51 - 55 20 50 168.00
1015390 55 - 59 20 50 170.10
1049190 59 - 63 20 50 172.20
1049200 63 - 68 20 50 176.40
1049210 68 - 73 25 25 214.20
818250 73 - 79 25 25 217.30
816270 79 - 85 25 25 222.60
1049240 85 - 91 25 25 225.70
1049260 91 - 97 25 25 229.90
1049270 97 - 104 25 25 234.10
1049280 104 - 112 25 25 239.40
1049220 112 - 121 25 25 245.70
1049230 121 - 130 25 25 254.10
907550 130 - 140 30 10 333.90
1049540 140 - 150 30 10 342.30
1163700 150 - 162 30 10 434.70
4163460 162 - 174 30 10 467.20
1049630 174 - 187 30 10 476.70
1049640 187 - 200 30 10 481.90
Industrial hoses and fittings
Hose clamps
Tension range
Item No. mm unit / 100 units
Hose clamps
In addition to the TORRO and GBS clamps, we also provide other NORMA clamps as part of our offering.
NORMAFIX RSGU pipe support clamps according to DIN 3016 are suitable for fastening
pipes, cables, cable trunks, cable conduit, hoses and other lines.
tension range: 6 to 40 mm
belt widths: 12 to 20 mm
material: W1: All parts completely galvanised steel
With the NORMAFIX BSL fastening clamps according to DIN 72571 (single-lug) or
DIN 72573 (dual lug) pipes, cable or cable conduit can be quickly and easily installed onto
structures. They are suitable for all industrial areas in which cost effective and safe instal-
lation is required.
Belt widths: 10 and 12 mm
For 1 to 6 lines
Material: W1: All parts completely galvanised steel
Industrial hoses and fittings
Hose clamps
BANDIMEX strip
Strip with fully rounded edges for the Bandimex fastening system.
For use with Bandimex slings of the same width.
Area of application: Fastening system
Design: Strip
Design: Bandimex
Material: Rust-proof steel V2A
/ carton / carton
Belt width Belt thickness beginning beginning
Item No. mm mm m at 1 carton at 5 carton
BANDIMEX slings
Slings for the Bandimex fastening system.
For use with single or dual slung Bandimex strips of the same width.
Area of application: Fastening system
Design: Sling
Design: Bandimex
Material: Rust-proof steel V2A
/ carton / carton
Belt width beginning beginning
Item No. mm unit at 1 carton at 5 carton
We provide hydraulic hoses in many versions In order to minimise downtimes for your
and materials such as plastic or rubber - from machines, we guarantee delivery at short notice
low-pressure to high-pressure to maximum and rapid assistance by our Hydraulic Hose
pressure hoses. Pipe couplings, ball valves, Service Centre. We keep various types of low-
quick connect couplings, protectors, hydraulic pressure hoses, high-pressure and maximum
pipes and measurement technology complete pressure hoses, multi-spiral hoses, PTFE hoses
the diverse and comprehensive product range. with stainless steel braiding and a wide range
of plastic hydraulic hoses with the associated
fittings in stock.
1 ssembly of hydraulic hose lines according to
A
manufacturer instructions.
1 2
Manufacture and
machining Product range on
the next pages
Rubber hydraulic hoses
Assembly made to measure Hydraulic hoses with textile lining
Hydraulic hoses with steel wire lining
We have the appropriate products for your
requirements and mount these properly in Multi-spiral hoses
accordance with manufacturer instructions in Suction hoses
our modern assembly plant.
Plastic hydraulic hoses
Workshop Service
PTFE/PFA hydraulic hoses
Our workshop has cutting and skiving
machines, hose pricking machines, cut to length R7/R8 hydraulic hoses
equipment, hose presses, embossing machines Color spray hoses
and test equipment with logging unit.
Low-pressure hydraulic hoses
It is thus guaranteed that assembly orders are
Oil and fuel hoses
always processed in accordance with the current
state of the art.
Assembly Service
We have the appropriate hose for every
application and assemble these customer-
specifically in accordance with the given
requirements. If required, we perform customer-
specific marking and a pressure test with
certificate.
3
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Hydraulic hoses and fittings
Tube couplings
and hose fittings
Comprehensive range of tube couplings and hose fittings made from stainless steel
Tube couplings to DIN or in special versions
Hose fittings with all standard connections: JIC, UNF, NPT, BSP, BSPT, metric, etc.
Adapters
Welded fittings (welded-on fittings,
welded-in bulkhead fittings, welding taper with or without O-ring, etc.)
Aseptic fittings for the food and pharmaceutical industries, etc.
Fittings with gaps or minimal dead space for applications requiring transitions inside
the tube that are as smooth as possible and piggable
Low-friction union nuts (a special coating greatly reduces the friction between the pipe
thread and the union nut, thereby decreasing the tightening torque)
Rapid response to special requests (special dimensions, special lengths, special angles,
special materials, a mixture of connections, etc.)
High-quality zinc nickel corrosion protection, many times higher than zinc:
> 480 h without white rust (DIN EN ISO 9227)
> 720 h without red rust (DIN EN ISO 9227)
Can be varnished
Hose protection
Hose protection
Width
Inner (flat) Unit
Item No. mm mm Metre /m
Inner Unit
Item No. mm Metre /m
4516990 16 15 / 30 12.88
4517000 19 15 / 30 15.48
4551130 22 15 / 30 18.13
4540480 25 15 / 30 20.53
10007092 28 15 / 30 21.20
4517010 35 15 / 30 22.45
4526170 38 15 / 30 22.73
10083312 51 15 / 30 36.18
Hydraulic hoses and fittings
Hose protection
Spacing of
Inner Wire thickness coil Unit
Item No. mm mm mm Metre /m
Hose protection
Anti-kink spring
Application: Prevents kinks in the hose immediately after swaging
Material: Galvanised spring steel
Hydraulic hoses and fittings
Hydraulic accessories
and components