Académique Documents
Professionnel Documents
Culture Documents
AN8472SA
Spindle motor driver IC for optical disk
Overview Unit: mm
11.00.3
The AN8472SA is a high performance IC suited
32 17
for driving a spindle motor of an optical disk such
as CD-ROM, DVD etc. Small outline package can
be used due to reduced power consumption by adopt-
6.10.3
8.10.3
ing the direct PWM drive system.
Features
3-phase full-wave 120 duty factor system 1 16 +0.10
0.650.10
0.20.05
Low power consumption due to a direct PWM
1.50.2
system
D-MOS transistor with low ON resistance (0.6
typ.) on the output stage
0.10.1
0.650.10
+0.10
(0.625) 0.65 0.3 0.05
With start and stop pins Seating plane
Thermal shut-down function built-in (0.5)
Applications
Optical disk drive of CD-ROM, DVD-ROM, CD-R, CD-RW etc.
1
AN8472SA ICs for Compact Disc/CD-ROM Player
Block Diagram
VPUMP
VM1
VDD
BC4
BC3
BC2
BC1
18
16
15
14
13
12
31
Step-up voltage circuit
H1H 7 28 A12
H3L 2 PWMOUT
23 RNF2
VH 1 Hall FF
bias 26 RNF1
SRESET
EC 8 RNFOUT
VT 5 17 GND
ECR 9
FC 32 Oscillator VC1
SSET
Pin Descriptions
Pin No. Symbol Description Pin No. Symbol Description
1 VH Hall bias pin 13 BC1 Booster capacitor connection pin 1
2 H3L Hall element-3 negative input pin 14 BC2 Booster capacitor connection pin 2
3 H3H Hall element-3 positive input pin 15 BC3 Booster capacitor connection pin 3
4 H2L Hall element-2 negative input pin 16 BC4 Booster capacitor connection pin 4
5 H2H Hall element-2 positive input pin 17 GND Ground pin
6 H1L Hall element-1 negative input pin 18 VDD Supply voltage pin
7 H1H Hall element-1 positive input pin 19 VM2 Motor supply voltage pin 2
8 EC Torque command input pin 20 N.C. N.C.
9 ECR Torque command reference input pin 21 A31 Drive output 3
10 FG FG signal output pin 22 A32 Drive output 3
11 Start Start/stop changeover pin 23 RNF2 Current det. pin 2
12 VPUMP Booster pin 24 A21 Drive output 2
2
ICs for Compact Disc/CD-ROM Player AN8472SA
3
AN8472SA ICs for Compact Disc/CD-ROM Player
4
ICs for Compact Disc/CD-ROM Player AN8472SA
2 H3L
Pin 3, 7 Pin 2, 6
2 k 2 k
(typ.) (typ.)
3 H3H
4 H2L
5 4
2 k 2 k
(typ.) (typ.)
5 H2
9 ECR
9 8
1 k 1 k
(typ.) (typ.)
5
AN8472SA ICs for Compact Disc/CD-ROM Player
11 Start
11
41 k
(typ.)
41 k
(typ.)
12 VPUMP
VM1 BC1 BC2 BC4 BC3 VPUMP
13 BC1 13 14 16 15 12
14 BC2
15 BC3
16 BC4
21 24 27
22 25 28 A12
Pin 23, 26
RNF1, RNF2
20 N.C. N.C.
21 A31 Refer to pin 19
22 A32
23 RNF2
24 A21
25 A22
26 RNF1
27 A11
28 A12
6
ICs for Compact Disc/CD-ROM Player AN8472SA
1 k
(typ.) 32
1 k
(typ.)
Usage Notes
Prevent this IC from being line-to-ground fault.
(To be concrete, do not short-circuit any of A31 (pin 21), A32 (pin 22), A21 (pin 24), A22 (pin 25), A11 (pin 27) and
A12 (pin 28) with GND pin (pin 17).)
Precaution must be taken on the pin 13 and pin 16 due to approximately 200 V of the static breakdown voltages.
(C = 200 pF, R = 0 )
Application Notes
PD Ta curves of SSOP032-P-0300
PD T a
1.400
1.289
1.200
Mounted on standard board
(glass epoxy: 50 50 t0.8 mm3)
Rth(j-a) = 96.9C/ W
1.000
Power dissipation PD (W)
0.800
0.668
0.600
0.400
Independent IC
without a heat sink
Rth(j-a) = 187.1C/ W
0.200
0.000
0 25 50 75 100 125 150
7
AN8472SA ICs for Compact Disc/CD-ROM Player
H1 H3 H2 H1 H2 H3
ECR
EC
0
Emit
A1
Output current 0
Sink
Emit
A2
Output current 0
Sink
Emit
Output current 0
A3
Sink
A B C D E F
8
ICs for Compact Disc/CD-ROM Player AN8472SA
VDD = 5 V
0.1 F
0.1 F
0.1 F
(Connect this capacitor,
if necessary,
after checking operation.)
12 VPUMP
5V
VM1
18 VDD
16 BC4
15 BC3
14 BC2
13 BC1
31
Step-up voltage circuit
FC 32
Oscillator VC1
SSET
560 pF