Académique Documents
Professionnel Documents
Culture Documents
KDC-MP438U
KDC-MP408U
KDC-MP338
CD-RECEIVER
INSTRUCTION MANUAL
AMPLI-TUNER LECTEUR DE CD
MODE DEMPLOI
REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM
MANUAL DE INSTRUCCIONES
US Residence Only
Register Online
Register your Kenwood product at
www.Kenwoodusa.com
B64-3955-00/00 (KW)
2 | KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Cleaning the Faceplate Terminals CDs with coloring on the recording surface or CDs
If the terminals on the unit or faceplate get dirty, wipe that are dirty cannot be used.
them with a clean soft dry cloth. This unit can only play the CDs with
.
This unit may not correctly play discs which do not
Lens Fogging have the mark.
When you turn on the car heater in cold weather, You cannot play a CD-R or CD-RW that has not been
dew or condensation may form on the lens in the finalized. (For the finalization process refer to your
CD player of the unit. Called lens fogging, this CD-R/CD-RW writing software, and your CD-R/CD-
condensation on the lens may not allow CDs to play. RW recorder instruction manual.)
In such a situation, remove the disc and wait for the
condensation to evaporate. If the unit still does not
operate normally after a while, consult your Kenwood
dealer.
English | 3
[] Control
Control knob
knob [SRC] [1] [2] [3] [4] [5] [6] USB Terminal
General functions avoid places with too much dust or the possibility of water
splashing.
To prevent deterioration, do not touch the terminals of the
Power/Source Select button [SRC]
unit or faceplate with your fingers.
Turns on the power.
When the power is on, the source switches between Auxiliary input Auxiliary input
Tuner (TUNER) , USB or iPod (USB or iPod), Used to connect a portable audio device with mini-
CD (CD) , Auxiliary input (AUX), and Standby plug cable (3.5 ).
(STANDBY) each time this button is pressed.
Press at least 1 second to turn off the power.
Use the mini-plug cable (stereo) which does not have any
resistance.
For whether USB devices and iPod can be connected, refer
to <About Audio file> (page 16). Muting volume upon reception of phone call
When an optional accessory is connected, the source name When there is a call, CALL is displayed and the audio
for each device appears. system is paused.
When connection of the iPod is recognized, the source When the call ends, CALL disappears and the audio
display changes from "USB" to "iPod". system comes back on.
The audio system comes back on when [SRC] is
Volume control Control knob
pressed during a call.
Turn the knob to adjust the volume.
Subwoofer output Control knob
Faceplate release Release
Switches between ON (SUBWOOFER ON) and OFF
Releases the faceplate lock so that it can be removed.
(SUBWOOFER OFF) each time pushing toward down
Refer to the following diagram when reattaching the
for at least 2 seconds.
faceplate.
Tuner functions
Disc & Audio file play functions Track/ File/ Folder repeat play [4]
Switches between Track Repeat (TRAC REP ON) and
Disc play Disc slot OFF (REP OFF) when pressed while playing a CD.
Starts playing when a disc is inserted. Switches between File Repeat (FILE REP ON), Folder
When a CD is inserted, the IN indicator is ON. Repeat (FOLD REP ON), and OFF (REP OFF) when
pressed while playing an audio file.
3 inch (8 cm) CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
The folder repeat operation cannot be performed while
USB device play (Function of KDC-X492/MP438U/ iPod is playing.
English | 5
6 | KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
English | 7
Information Display
Music title & Artist name TITLE/ARTIST
Album name & Artist name ALBUM/ARTIST
Folder name FOLDER NAME
File name FILE NAME
Play time & Music number P-TIME
Clock CLOCK
In HD Radio source
Information Display
Station name STATION NAME
Music title/ Artist name/ Album name/ Genre TITLE
Frequency FREQUENCY
Clock CLOCK
8 | KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Function of KDC-MP408U
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz.
English | 9
Play Functions of Disc Changer Function of disc changers with remote control
While a disc in the disc changer is being played, the Direct Disc Search
following play functions can be used. Searchs the disc by entering the disc number.
Playing the Current Song or Disc Repeatedly. 1 Enter the disc number
(Repeat play) Press the number buttons on the remote
Press the [4] button. control.
Pressing the button repeatedly selects Track Repeat
2 Search the disc
play on (TRAC REP ON), Disc Repeat play on
Press the [FM] or [AM] button.
(DISC REP ON), and Repeat play off (REP OFF)
sequentially. Cancelling Direct Disc Search
Press the [38] button.
Randomly plays the music in the disc changer.
(Magazine random play)
Press the [6] button. Input 0 to select disc 10.
Pressing the button toggles the setting between Direct Disc Search cannot be performed during playing
of Random play or scan play.
Magazine random play on (MGZN RDM ON) and
off (RDM OFF).
10 | KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Function of Music CD
Track Select
Select the song you want to listen to by turning the
control knob.
English | 11
AUD AUD
DIRECT
*2-ZONE In CD/USB source
09
Music select [4]/[]
English | 15