Académique Documents
Professionnel Documents
Culture Documents
construction progress
DOMINO
Only use as many ties as necessary.
Seal unused tie holes with 20 Plugs, Item no. 030290.
2,2 m
2,5 m
55
kN/m2
0,3 m
50,0 kN/m2 Line 5
Compensation Waler DAR DWD 5
24 35
2. DOMINO DRS Alignment Coupler
Fastens, aligns and tightens in one sin-
DOMINO DKS Wedge Coupler
For standard panel joints as well as
gle operation. external and internal corners.
Compensation Waler DAR Timber 11.5 cm
2 DWD 5
+ filler timber
25 36,5
1.5 cm
Note:
When using the articulated corner as a 90 internal corner, the ties may be
inserted through the outer holes of the articulated corner. Only when the
compensation walers are used, e.g. for oblique angles, the ties may be 5.
placed through the inner holes of the articulated corners. 4. Oblique angles 75
External articulated corner Internal articulated corner
Components needed for each side for Components needed for each side for
6. T-Junctions
The 75 panel and the articulated Basic rules for T-junctions:
Foundations 5. Wall Offsets
corner form the T-junction. External formwork: Wall footings and single-column Using the top tie bracket for the top tie 0 17 cm
25
Together with the DWD 5 compensa- Panel D 75 footings with the foundation tie point avoids having to exactly position By moving the panel laterally
tor, wall thicknesses from 15 cm to Internal formwork: spanner and tie bracket. the DOMINO panels opposite each and front-sided plywood.
35 cm in 5 cm increments are Inside Steel Corner DISE The DOMINO foundation tie spanner other. It is possible to tie at any posi-
DWD 5
possible. Adjusted to wall thickness with Filler timber for easy shuttering of foundations replac- tion of the panel.
DWD 5 compensator or timber. 1 cm Compensation Waler DAR
es the bottom tie position and saves
20 24 7. work space and earthmoving operations.
Ties are tensioned accurately with a self-
cleaning hexagonal spindle.
250
DWD 5 Compensation Waler DAR Timber 11.5 cm The 1.25 m high DOMINO panels DOMINO DOMINO
DWD 5
12
have inset tie points and can be Foundation Tie Clamp DLS Top Tie Bracket DAH
used on their sides without any Item no. 066090 Item no. 066086
problems.
25 30 35 36,5
25 37 cm 17 83 cm
With Inside Steel Corner DISE and With Inside Steel Corner DISE and
1,25 m
filler timber till max. 10 cm. Multi Panel in 3 cm increments. Tie hole position
DM 75
Inside Steel
c
max. 36.5 cm
Corner DISE
DM 75
DM 75 Compensation
275
DM 75 Waler DAR
Compensation
Waler DAR
Centre Section MTF, with water bar
The concrete cover c
is 2.5 cm or 5 cm.
300
Plate. height.
c
DM 75
serve to align the formwork and to the table. Connection to the DOMINO
wird zur temporren Montage von
Ankerlnge L 130 mm
Baubehelfen an Stahlbetonbauteilen
He idt 35 25
eingesetzt.
DM 75
Klemmstrke tfix 612 mm
100 75 50 DISE DGE DAW DWD 5 DWD 10 DPA Weitere technische Informationen
wiederverwendbar (siehe Hinweis)
Verankerungstiefe hnom L tfix
Multi-Purpose Internal Steel Articulated Outside Wall Thickness Wall Thickness Filler
Montageanleitung Anzugsdrehmoment MD 50 Nm
ht
Schlsselweite
Achsabstand
SW
s
24 mm
500 mm
Item no.: 124777
Panel Corner Corner Corner Angle Compensation Compensation Support To be arranged as shown in the follow- Connector DRA and to the ground by
Randabstand c 500 mm
Stahlbetonbauteildicke d 225 mm
h1
d0
Durchgangsloch im zu befestigenden Teil db 2122 mm
MD
Betonfestigkeitsklasse C20/25 bis C50/60
ing drawing and table. means of matching Base Plate and An-
Beton gerissen/ungerissen zul. FZ* zul. FQ*
SW 24 fck = 10 N/mm2, fck,cube = 12 N/mm2 12,0 kN 35,0 kN
fck = 12 N/mm2, fck,cube = 15 N/mm2 14,7 kN 35,0 kN
fck = 16 N/mm2, fck,cube = 20 N/mm2 16,7 kN 35,0 kN
fck = 20 N/mm2, fck,cube = 25 N/mm2 18,6 kN 35,0 kN
The first panel must always be braced chor Bolt PERI 14/20 x 130 or similar.
c SW 24 Interaktionsgleichung
c
s FZ
1,0
FQ
1,0
s
FQ zul. FZ zul. FQ
db
tfix
FZ FQ
1,2
zul. FZ + zul. FQ
d
FZ
Schalung Gerst Engineering
Postfach 1264
89259 Weienhorn
Deutschland
Telefon +49 (0)7309.950 - 0 1 2 3 4
350
Actual push-pull prop load [kN] FRS 5.00 5.00 5.00 5.00 5.00 5.00 w = q(z) cp [kN/m2]
Inland, Wind Load Zone 2
Actual kicker load [kN] FAV 2.00 1.50 1.10 1.10 1.10
y
[kN/m2]
including platforms.
kicker braces to the horizontal struts of concreting platform. Simply hook in panel units. Maximum lifting capacity Moving of large-sized
panel units with the
the DOMINO panels. and secure with pins. of 500 kg, at a crane sling angle of DOMINO lifting hook.
max. 30.
Always use in pairs! 30
30
Steel
150
Follow Instructions
for Use!
425
m2 1,50 1,13 0,75 0,53 0,38 1,13 0.75 0.75 0.35 0.08 0.05 Original Instructions for Use
Item no. 124498 124504 124510 124517 124523 124538 126286 124605 124608 125944 124577 the bracket is 2 m with a permissible
Weight 56,5 kg 46,1 kg 34,2 kg 26,9 kg 22,7 kg 51,3 kg 40.0 kg 23.7 kg 6.49 kg 4.79 kg 2.48 kg load of 150 kg/m2. Guardrails are
(aluminium) (aluminium) (aluminium) (wood) installed using Guardrail Post HSGP.
Item no. 066082 Item no. 066085 Instructions for Use for the
DOMINO Lifting Hook
Steel
125
Follow Instructions
125
for Use!
m2 1,25 0,94 0,94
Ready-to-use DOMINO formwork with
Item no. 066050 066051 066052
push-pull props, concreting scaffold
Weight 31,0 kg 24,8 kg 27,3 kg
and handrails.
End Guardrail Frame 55 Pallets and Stacking Devices
500
Edition 03 | 2013
DOMINO
Panel Formwork
Poster
Edition 03 | 2013
The optimal System for every
Project and every Requirement
PERI GmbH
Formwork Scaffolding Engineering
P.O. Box 1264
89259 Weissenhorn
Germany
Tel. +49 (0)7309.950-0
Fax +49 (0)7309.951-0
info@peri.com
www.peri.com