Académique Documents
Professionnel Documents
Culture Documents
Buffalo Brand
Metal Furniture
Manufactured by
Z3 9 ZL JVINTERTHUR MUSEUM
LIBRARIES
Digitized by the Internet Archive
in 2011 with funding from
Lyrasis Members and Sloan Foundation
http://www.archive.org/details/buffalobrandmetaOObuff
NEVERWEAR
NEVERBREAK
Steel Furniture
STEEL FURNITURE
This introduction to our catalogue is entitled "Cold
Facts," because our competitors cannot contradict the
fact that our line is constructed stronger and has a
better appearance than any other line of round steel
furniture made.
Fact No. 1 Neverwear-Neverbreak steel Furniture
is constructed as follows: in making each leg we take
three steel rods and twist them together. All other manu-
facturers use only two rods, consequently our furniture
is at least one-third stronger.
Fact No. 2 And on account of using three rods the
diameter of the leg is one-third larger than any other
round steel chair or table leg made, consequently it has
that nice solid, well proportioned appearance which is
not obtainable when only two rods are twisted together.
Fact No. 4 Our patrons are taking no chances in
buying our line of Steel Furniture, as all of our products
are covered by broad guarantees.
Note last page.
Fact No. 5 That we make the best line for export
K. D. shipments, as each leg is made separate and com-
plete, and to set up the four legs all that is necessary is
to screw up one bolt; no driving or adjusting.
Terms
Write us.
NEVERWEAR
No. 30 Chair
No. 31 Chair
No. 32 Chair
No. 33 Chair
No. 34 Chair
Child's size, used in connection with large outfits. Has 10 inch
seat and is 12 inches high to seat. Generally sold in combination
with No. 31 Chair and Nos. 330, 360 and 363 Tables.
Japanese copper or Nickel finish.
Seat Quartered Oak, Birch Mahogany or Leatherette.
NEVERBREAK
No. 35 Chair
No. 70 Chair
For all kinds of work, where a high, strong chair is needed.
Easy, spring back. No. 31 square back furnished if desired. Seat
measures 14^4 inches. Made of heavy laminated wood. Set in
stamped steel ring. Cannot crack like a solid seat. Finished in
oak or mahogany. Chair has heavy steel foot ring. Makes legs
very strong and rigid. Legs made of three tV steel rods twisted
together. Cannot break. Much stronger than if made from angle
iron. All parts bolted up with tV carriage bolts. Will not work
loose or break. We use no rivets. Metal parts Japanese copper
finished. Will not crack off like enamel.
2 in 1 Chair
/
Leatherette Seat 9 l 2 inches in diameter
net weight 6 lbs.
\
20 NEVERWEAR
ing device.
in diameter.
For any and every use. The most rigid high chair
made. Revolving screw seat with locking device. Very
comfortable yielding back, being adjustable up and down,
in or out. Strong steel foot rest. No repairs needed on
our line of furniture. Height 28 to 33 inches, adjustable;
seat, 15 inches in diameter.
30 NE VERWE A
Nickel finish.
Nickel Finish.
30 "
NEVERBREAK
Nickel Finish.
No. 3254
Nickel Finish.
Stock sizes : 30 x 42
30 x 48
30 x 54
30 x 60
Base Japanned.
Base Japanned.
Top, Oak or Birch Mahogany.
Made in the following sizes
Quick deliveries.
R
58 NEVE R WE A
30x72
<Sr~^
Metal Stools