Académique Documents
Professionnel Documents
Culture Documents
Table of content
Project survey............................................................................................................................................................ 3
Compressor Selection: Compact Screw Compressors CS........................................................................................ 4
Technical Data: CSH9593-300Y................................................................................................................................ 5
Compact Screw Compressors CS............................................................................................................................. 6
BITZER Software v6.6.0 rev1735 22.05.2017 / All data subject to change. 3/6
Project survey
Selected compressors
Compact Screw Compressors CS 1x CSH9593-300Y
BITZER Software v6.6.0 rev1735 22.05.2017 / All data subject to change. 4/6
*According to EN12900 (10K suction gas superheat, 0K liquid subcooling, see T.Data/ Notes)
Legend
oil cooling required
CR 75%
CR 100%
CR 75%
CR 50%
CR 25%
M1: motor 1
M2: motor 2
BITZER Software v6.6.0 rev1735 22.05.2017 / All data subject to change. 5/6
Technical Data
Technical Data
Displacement (2900 RPM 50 Hz) 910 m/h
Displacement (3500 RPM 60 Hz) 1098 m/h
Weight 1400 kg
Max. pressure (LP/HP) 19 / 28 bar
Connection suction line DN 125
Connection discharge line DN 100
Oil type R22 B320SH (Standard)
Oil type R134a/R407C/R404A/R507A/R407A/R407F BSE170 (Option)
Oil type R1234yf/R1234ze(E)/R450A/R513A BSE170 (Option)
Motor data
Motor voltage (more on request) 380-415V D-3-50Hz
Max operating current 450.0 A
Starting current (Rotor locked) 805.0 A Y / 2520.0 A D
Max. Power input 280,0 kW
Extent of delivery (Standard)
Enclosure class IP54
Oil heater 300 W (Standard)
Oil separator Standard
Oil filter Standard
Discharge gas temperature sensor Standard
Start unloading Standard
Capacity Control - 4-step 100-75-50-25% (Standard)
Capacity Control - infinite 100-25% (Standard)
Built-in check valve Standard
Motor protection SE-E1 (Standard), SE-E3(Standard for 660-690V)
Oil charge 30,0 dm
Available Options
Oil level switch min / max OLC-D1-S (Option)
Discharge shut-off valve Option
Suction shut-off valve Option
Shut-off valve for ECO with muffler Option
Liquid injection with integrated nozzle Option
Bridges for DOL start Option
Vibration dampers Option
Motor protection SE-i1 (200-690V)
BITZER Software v6.6.0 rev1735 22.05.2017 / All data subject to change. 6/6
Compact Screw Compressors CS