Académique Documents
Professionnel Documents
Culture Documents
Worldwide sales and service capabilities from the industry leader is part of the
package for every Sauer-Sundstrand gear product customer.
Proven reliability with over 45 years of experience in gear product design for
mobile and industrial applications.
System pressures to 4000 psi (276 bar) and speeds to 10,000 rpm allow high
performance in system design.
Low cost design and manufacturing for the requirements of fixed displacement
systems.
CP222
CP180
SNP3
Front Pump
SP2 1/2
SNP2
TFP100
TFP50
TFP50 TFP100 SNP2 SP2 1/2 SEP3/SNP3 CP180 CP222
Rear Pump
Copyright 1994, Sauer-Sundstrand Company.
All rights reserved. Contents subject to change.
Information contained herein should be confirmed before placing orders.
Printed in the U.S.A. 0194 H
2
BACK
CP180
Gear Pump Models
SEP3
SNP3
SP2 1/2
SNP2
TFP100
TFP50
Gear Motor
Models
TAM 22/90
SNM2
TFM100
0 .1 .2 .3 .4 .5 1 2 3 4 5 6 7 8 9 10
Displacement (in3/rev)
Information in the following pages will help determine which Sauer-Sundstrand components are most
appropriate for your application.
3
BACK
4
BACK
Figure 1
Pressure compensated
bearings made in anti-
friction alloy. Extruded aluminum alloy body for high
pressure with flanged or threaded type
ports. Compatible with all the standards
of the market.
Teflon impregnated
6 different standard types of mounting
bushings (DU type) for
flanges, meeting all the standards of
long life and high per-
the market.
formance.
P001139
5
BACK
Table 1: SNM 2
Table 2: SEM 2
6
BACK
SNM 2 / 25CO02
Shaft
Configuration (Flange and Ports)
CO = Tapered shaft with key
SC = Splined shaft 01 = Standard DIN flange and ports (SEM 2)
CI = Parallel shaft with key 02 = Bosch ports, 80mm pilot on flange
FR = Tang Shaft for Oldham coupling 03 = Bosch ports, 80mm pilot on flange
06 = SAE "A" Flange and Ports
7
BACK
Temperature Range
T min = - 4F (- 20 C), intermittent, cold start.
T max = 180F (+ 80 C), maximum, continuous.
Output Power
Speed Range
See performance curves on pages 10 - 13.
See tables on page 6.
Input Flow
Weight
See performance curves on pages 10 - 13.
Available upon request.
8
BACK
Vg p mh Vg p mh
Output torque Me = Nm Output torque Me = in lb
20 2
Me n Qe p t Me n Qe p t
Output Power P= = kW Output Power P= = HP
9550 600 9550 1714
9
BACK
Performance Curves
[ = 25 mm2/s (120 SUS), = 50 C (122F)]
Figure 4: SNM 2/ 6
Figure 3: SNM 2/ 6
10.7 HP, 8 kW
12.1 HP, 9 kW
0.67 HP, 0.5 kW
1.3 HP, 1 kW
2.7 HP, 2 kW
4.0 HP, 3 kW
5.4 HP, 4 kW
6.7 HP, 5 kW
8.1 HP, 6 kW
9.4 HP, 7 kW
3625 (250)
3625 (250)
2900 (200)
%
89
%
88
2900 (200)
2176 (150)
1000 rpm
1500 rpm
2000 rpm
3000 rpm
4000 rpm
700 rpm
87%
2176 (150)
86%
1450 (100)
85%
1450 (100)
725 (50)
83%
81%
psi (bar)
725 (50)
psi (bar)
700
0 2.6 (10) 5.3 (20)
0
gpm (l/min) 0 500 1000 1500 2000 2500 3000 3500 4000
min -1
P001145A RPM
P001145B
14.8 HP,11 kW
17.4 HP,13 kW
12.1 HP,9 kW
1.3 HP, 1 kW
2.7 HP,2 kW
4.0 HP,3 kW
5.4 HP,4 kW
6.7 HP,5 kW
9.4 HP,7 kW
3625 (250)
2176 (150)
2900 (200)
4000 rpm
1000 rpm
1500 rpm
2000 rpm
3000 rpm
700 rpm
90%
1450 (100)
2176 (150) 92%
91%
%
725 (50) 90
1450 (100)
% %
89 89
psi (bar)
88%
90
% 91%
0
89%
700
0
0 500 1000 1500 2000 2500 3000 3500 4000
min -1
RPM
P001146A P001146B
10
BACK
13.4 HP,10 kW
16.1 HP,12 kW
18.8 HP,14 kW
21.5 HP,16 kW
10.7 HP,8 kW
1.3 HP, 1 kW
2.7 HP, 2 kW
4.0 HP, 3 kW
5.4 HP, 4 kW
6.7 HP, 5 kW
8.1 HP, 6 kW
3625 (250)
3625 (250)
2900 (200)
2900 (200)
2176 (150)
1000 rpm
2000 rpm
3000 rpm
1500 rpm
4000 rpm
700 rpm
1450 (100)
%
89
1450 (100) %
88 %
87 6% %
8 5
83%
725 (50) 8
psi (bar)
725 (50)
psi (bar)
700
0 2.6 (10) 5.3 (20) 7.9 (30) 10.6 (40)
0
gpm (l/min)
0 500 1000 1500 2000 2500 3000 3500 4000
min -1
P001147A RPM
P001147B
24.1 HP, 18 kW
29.5 HP, 22 kW
14.8 HP,11 kW
18.8 HP,14 kW
12.1 HP,9 kW
1.3 HP, 1 kW
2.7 HP, 2 kW
4.0 HP, 3 kW
5.4 HP, 4 kW
6.7 HP, 5 kW
9.4 HP, 7 kW
3625 (250)
3625 (250)
2900 (200)
%
90
2900 (200)
2176 (150)
1000 rpm
1500 rpm
2000 rpm
3000 rpm
4000 rpm
500 rpm
%
89
2176 (150)
87%
1450 (100)
88%
1450 (100)
86%
85%
725 (50)
83%
psi (bar)
725 (50)
0
0 2.6 5.3 7.9 10.6 13.2 15.6
psi(bar)
700
11
BACK
14.8 HP, 11 kW
18.8 HP, 14 kW
24.1 HP, 18 kW
29.5 HP, 22 kW
12.1 HP, 9 kW
1.3 HP, 1 kW
2.7 HP, 2 kW
4.0 HP, 3 kW
5.4 HP, 4 kW
6.7 HP, 5 kW
9.4 HP, 7 kW
3336 (230)
2900 (200)
3336 (230)
89%
2900 (200)
2176 (150)
1000 rpm
1500 rpm
2000 rpm
3000 rpm
4000 rpm
500 rpm
88%
2176 (150)
86%
87%
1450 (100)
1450 (100)
725 (50)
%
85
%
83
psi (bar)
725 (50)
0
0 2.6 5.3 7.9 10.6 13.2 15.6 18.5 21.1
psi (bar)
18.8 HP, 14 kW
22.8 HP, 17 kW
28.2 HP, 21 kW
10.7 HP, 8 kW
1.3 HP, 1 kW
2.7 HP, 2 kW
86 4.0 HP, 3 kW
5.4 HP, 4 kW
6.7 HP, 5 kW
8.1 HP, 6 kW
3000 (210)
2900 (200)
3050 (210) 88
%
%
2900 (200)
2176 (150)
1000 rpm
1500 rpm
2000 rpm
3000 rpm
3500 rpm
500 rpm
2176 (150)
1450 (100)
86%
87%
1450 (100)
725 (50) %
91
%
%
90
% 87 86%
89 88%
725 (50)
psi (bar)
0 85%
psi (bar)
12
BACK
14.8 HP, 11 kW
18.8 HP, 14 kW
24.1 HP, 18 kW
29.5 HP, 22 kW
12.1 HP, 9 kW
1.3 HP, 1 kW
2.7 HP, 2 kW
4.0 HP, 3 kW
5.4 HP, 4 kW
6.7 HP, 5 kW
9.4 HP, 7 kW
3000 (210)
2900 (200)
2610 (180)
%
89
2176 (150) 2176 (150)
1000 rpm
1500 rpm
2000 rpm
3000 rpm
3500 rpm
500 rpm
88%
1450 (100) 1450 (100)
87%
86%
84%
82%
725 (50)
725 (50)
psi (bar)
psi (bar)
0
0 2.5 5.3 7.9 10.6 13.2 15.9 18.5 21.1 0
0 500 1000 1500 2000 2500 3000 3500
0 (10) (20) (30) (40) (50) (60) (70) (80)
min -1
gpm P001151A RPM
P001151B
(l/min)
Figure 17: SNM 2/ 25 Figure 18: SNM 2/ 25
14.8 HP, 11 kW
18.8 HP, 14 kW
24.1 HP, 18 kW
29.5 HP, 22 kW
12.1 HP, 9 kW
1.3 HP, 1 kW
2.7 HP, 2 kW
4.0 HP, 3 kW
5.4 HP, 4 kW
6.7 HP, 5 kW
9.4 HP, 7 kW
2610 (180)
2175 (150)
2320 (160)
2176 (150)
85%
1450 (100)
%
89
1000 rpm
1500 rpm
2000 rpm
3000 rpm
3500 rpm
500 rpm
1450 (100) %
% 86
88
%
%
85
87
725 (50)
%
84
725 (50)
81
0
0 2.5 5.3 7.9 10.6 13.2 15.6 18.5 21.1 23.9
psi (bar)
gpm 0
l/min 0 500 1000 1500 2000 2500 3000 3500
min -1
RPM
P001152A P001152B
13
BACK
Configuration CO 01 Configuration
B max 40.5 CI 01
A 0.5 17.2 36.5
6.3 21.7 30
-0,025
36,5 -0,064
90 0.25
15 -0.018
18 5 6.5
17.46
H A
(41.9)
32.4
115.2 max
n
(96,2)
M12x1.25-6g*
(73.3)
63.8
C
H A
0.5
0.5
15.7
M6.12 deep
31.4
9
12 deep E 71.5
e Conic 1:8 Drain Port ,R 1/4
D 0.20
d 90 max
+0.10
16.5 -0,.0
+0.15
9.5 -0.25
4 -0.030 4 -0.030
Table 3 : Dimensions
Dimensions [mm]
Motor
Model Displacement Max. Pressure
Inlet Outlet
cm3 in3 bar psi A B C D E c d e
SEM2 / 6 6.0 0.37 210 3000 45 93.5 13.5 30 M6 13.5 30 M6
SEM2 / 8 8.4 0.51 210 3000 45 97.5 13.5 30 M6 13.5 30 M6
SEM2 / 11 10.8 0.66 210 3000 49 101.5 13.5 30 M6 13.5 30 M6
SEM2 / 14 14.4 0.88 210 3000 52 107.5 20 40 M8 20 40 M8
SEM2 / 17 16.8 1.03 210 3000 52 111.5 20 40 M8 20 40 M8
SEM2 / 19 19.2 1.17 210 3000 56 115.5 20 40 M8 20 40 M8
SEM2 / 22 22.8 1.39 180 2600 59 121.5 20 40 M8 20 40 M8
SEM2 / 25 25.2 1.54 160 2300 59 125.5 23.5 40 M8 23.5 40 M8
14
BACK
Configuration CO 02 Configuration
SC 02
B max 38
A 0.5 16.5 23.5
16.5 -0.110
12.5 7.2
17.46
(44.5)
34.5
-0.060
80 -0.106
120 max
C n
c (100)
M12x1.25-6g*
(75.5)
65.5
0.5
0,5
45
15.7
31.4
9 Spline shaft
12 deep E Drain Port
Conic 1:5 72 B 17x14 DIN 5482
e D 0.20 R 1/4
d 92 max
+0.30
0.10
3 -0.025
9
Table 4 : Dimensions
Dimensions [mm]
Motor
Displacement Max. Pressure
Inlet Outlet
cm3 in3 bar psi A B C D E c d e
SNM2 / 6 6.0 0.37 250 3600 41.1 96 15 35 M6 15 35 M6
SNM2 / 8 8.4 0.51 250 3600 43.1 100 15 35 M6 15 35 M6
SNM2 / 11 10.8 0.66 250 3600 47.5 104 15 35 M6 15 35 M6
SNM2 / 14 14.4 0.88 250 3600 47.5 110 15 35 M6 15 35 M6
SNM2 / 17 16.8 1.03 230 3300 47.5 114 15 35 M6 15 35 M6
SNM2 / 19 19.2 1.17 210 3000 47.5 118 20 40 M6 20 40 M6
SNM2 / 22 22.8 1.39 180 2600 55 124 20 40 M6 20 40 M6
SNM2 / 25 25.2 1.54 160 2300 64.5 128 20 40 M6 20 40 M6
15
BACK
Configuration FR 03
8,5 B 0,5
(max)
A 0,5 7.2
-0,030
52 -0,076
6,5 0,20 2,7 0,60 2 3,2 +0,20
12 90 0.25
0,5
14,3
30
19
31,4
34
C n
103 max
c
(60)
45,7
-0,025
8 -0,083
0,5
47,8 -0,20
15,7
45
Table 5 : Dimensions
Dimensions [mm]
Motor Betriebsdruck
Displacement Max. Pressure
Inlet Outlet
cm3 in3 bar psi A B C D E c d e
SNM2 / 6 6.0 0.37 250 3600 38.6 85 15 35 M6 15 35 M6
SNM2 / 8 8.4 0.51 250 3600 40.6 89 15 35 M6 15 35 M6
SNM2 / 11 10.8 0.66 250 3600 45 93 15 35 M6 15 35 M6
SNM2 / 14 14.4 0.88 250 3600 45 99 15 35 M6 15 35 M6
SNM2 / 17 16.8 1.03 230 3300 45 103 15 35 M6 15 35 M6
SNM2 / 19 19.2 1.17 210 3000 45 107 20 40 M6 20 40 M6
SNM2 / 22 22.8 1.39 180 2600 52.5 113 20 40 M6 20 40 M6
SNM2 / 25 25.2 1.54 160 2300 62 117 20 40 M6 20 40 M6
16
BACK
Dimensions, continued
Configuration CI 06 / SC 06 (SAE-A Flange)
Configuration CI 06 Configuration
SC 06
B max 31.7 132 max
A 0.5
31.7
106.38
7.9 23.8 23.8 7.9
15.456 -0.127
max8
R4
12 6 M6.16deep 20
11-11.6
H
82.55 -0.050
115.5 max n
15.875 -0.025
0.5
0.5
15.7
31.4
17.475-17.729
Schnitt H-H
Sectional View H-H
P001143
Table 6 : Dimensions
Dimensions [mm]
Motor
Displacement Max. Pressure
Inlet Outlet
cm3 in3 bar psi A B C c
SNM2 / 6 6.0 0.37 250 3600 45 93.5
SNM2 / 8 8.4 0.51 250 3600 47 97.5 7/8 - 14UNF - 2B 7/8 - 14UNF - 2B
SNM2 / 11 10.8 0.66 250 3600 49 101.5 16.7mm thread depth 16.7mm thread depth
SNM2 / 14 14.4 0.88 250 3600 52 107.5
SNM2 / 17 16.8 1.03 230 3300 54 111.5
SNM2 / 19 19.2 1.17 210 3000 56 115.5 1 1/16 - 12UN - 2B 1 1/16 - 12UN - 2B
SNM2 / 22 22.8 1.39 180 2600 59 121.5 18 mm thread depth 18 mm thread depth
SNM2 / 25 25.2 1.54 160 2300 61 125.5
17
BACK
Outrigger Assembly
For SN Series Pumps and Motors
Loading
Outrigger assemblies are recommended for use when heavy radial loads pose a problem for shaft loads on standard
pumps and motors. Maximum radial load is 360 lbs at 1.5" from the mounting flange surface. Maximum axial load is
200 lbs. The maximum continuous torque rating is 620 in lbs (70 Nm), or the same as the FR03 pumps and motors.
Pressure
Maximum allowable case drain pressure or return line (if case drain not utilized) is 300 psi continuous and 400 psi
peak. Pumps and motors using the outrigger and operating above 2500 rpm must use the outrigger case drain port.
See page 19 for reference and port locations. The SNM2 motor must be used for these applications.
Applications
The following bi-directional motor codes will mount directly to the outrigger:
SEM2/...FR03 SNM2/...FR03
SEM2/...FR03 E SNM2/...FR03 E
18
BACK
Figure 24
Figure 25
19
BACK
Customer Service
SAUER-SUNDSTRAND COMPANY
Customer Service Department
2800 East 13th Street
Ames, IA 50010
Phone: (515) 239-6598
Telefax: (515) 239-6419
20