Vous êtes sur la page 1sur 1

3

Scotchkote
Fusion-Bonded Epoxy Coating 206N LG
Product Description Coating Test Data
3M Scotchkote Fusion Bonded Epoxy 206N LG is a one- Property Test Description Result
part, heat curable, thermosetting, powdered epoxy coating
designed for coating the interior of line pipe. Impact ASTM G14 160 in-lbs.
1/8" x 3" x 3" in steel panel 1.8 kg-m
Scotchkote 206N LG meets the requirements of AWWA (0.32 cm x 7.6 cm x 7.6 cm)
Standard C213 and C550. 5/8" (1.6 cm) diameter tup

Properties Bendability

Saudi Aramco 09-SAMSS-091 10.5 PD (5.5/PD)
500-625 micron thickness
Property Value Water ASTM D 4585-92
Color dark green Resistance Cleveland Test *Pass
52C with 15C Gradient
Specific Gravity (Air Pycnometer) 1.44 3 weeks continuous
Coverage 134 ft2/lb/mil Abrasion Saudi Aramco 09-SAMSS-091 0.11 g loss
0.694 m2/kg/mm Resistance ASTM D4060
Shelf life 80F (27C) 12 mo. minimum
*Pass means excellent adhesion, no blisters and no swelling.
Gel time @ 423F (217C) 30-45 seconds
Modified CSA-Z245.20

General Application Information Handling & Safety Precautions


Remove oil, grease and loosely adhering deposits. Read all Health Hazard, Precautionary and First Aid
Abrasive blast-clean the surface to near-white in statements found in the Material Safety Data Sheet, and/or
accordance with SSPC-SP10 or NACE No. 2. product label of chemicals prior to handling or use.
Heat pipe to 350450F (177232C)
Deposit Scotchkote 206N LG onto the interior of the
pipe at 16-40 mils (406-1016 microns). Ordering Information
Within 24 hours move coated pipe to a post cure station For ordering information, technical information, product
and hold the pipe at 450F (232C) for 10 minutes. information or to request a copy of the Material Safety Data
Electrically inspect for holidays after coating has cooled Sheet: phone: 1-800-722-6721 or 1-512-984-9393
to 200F (93C) or lower. fax: 1-877-601-1305 or 1-512-984-6296
When Scotchkote 206N LG is used with 3M primers,
contact the 3M representative for application and cure
conditions.
Tested and Certified to ANSI/NSF Standard 61,
Drinking Water System Components.

Handling & Safety Precautions Ordering Information/Customer Service


Read all Health Hazard, Precautionary, and First Aid statements found in the For ordering technical or product information, or a copy of the Material
Material Safety Data Sheet, and/or product label prior to handling or use. Safety Data Sheet, call:
Phone: 800/722-6721 or 512/984-9393
Fax: 877/601-1305 or 512/984-6296
Important Notice Warranty; Limited Remedy; Limited Liability.
All statements, technical information, and recommendations related to 3Ms products are This product will be free from defects in material and manufacture for a period of one 24
based on information believed to be reliable, but the accuracy or completeness is not months from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT
guaranteed. Before using this product, you must evaluate it and determine if it is suitable NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
for your intended application. You assume all risks and liability associated with such use. PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
Any statements related to the product which are not contained in 3Ms current publications, your exclusive remedy shall be, at 3Ms option, to replace or repair the 3M product or refund
or any contrary statements contained on your purchase order shall have no force or effect the purchase price of the 3M product. Except where prohibited by law, 3M will not be
unless expressly agreed upon, in writing, by an authorized officer of 3M. liable for any indirect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.

3
Corrosion Protection Department
6801 River Place Blvd. Please recycle. Printed in USA.
Austin, TX 78726-9000 3M 2008. All rights reserved.
www.3M.com/corrosion 80-6111-8318-9-A

Vous aimerez peut-être aussi