Académique Documents
Professionnel Documents
Culture Documents
IEBPTPCH
- Print Program
IEBGENER
- Sequential Copy Program
3. Used to Print sequential data sets, members of partitioned data sets or PDSEs.
4. It can also do some ltering of the data, change LRECL and BLKSIZE, generate records, and several other
functions. However, the most common use is to simply copy data sets.
5. On some systems it is possible to send email from a batch job by directing the output of the IEBGENER to
the "SMTP" external writer.
IEBCOPY
- Library Copy Program
5. Copy a PDS to itself, reclaiming unused space (compress). If a PDS runs out of space, IEBCOPY can
compress it.
6. Create a sequential form of a partitioned data set or PDSE for a backup or transport.
11. Convert load modules in a partitioned data set to program objects in a PDSE when copying a partitioned
data set to a PDSE.
12. Convert a partitioned data set to a PDSE or a PDSE to a partitioned data set.
13. Copy to or from a PDS or PDSE data set, a member and its aliases together as a group (COPYGROUP)
IEBCOMPR
- Compare Datasets Program
1. Used to compare two sequential data sets, two partitioned data sets or two PDSEs at the logical record
level to verify a backup copy.
2. Fixed, Variable, or undened records from blocked or unblocked data sets or members can also be
compared.
IEBDG
- Test Data Generator Program
1. Used to provide a pattern of test data to be used as a programming debugging aid. This pattern of data
can then be analyzed quickly for predictable results.
2. IEBDG also gives you the option of specifying your own exit routine for monitoring each output record
before it is written
IEBEDIT
- Edit Job Stream Program
1. To create a data set containing a selection of jobs or job steps. These jobs or job steps can be entered
into the job stream at a later time for processing.
IEBIMAGE
IEBIMAGE
- Create Printer Image Program
1. Modify, print, or link modules for use with the IBM 3800 Printing Subsystem and IBM 4248 printer modules
and stores them in a library.
2. With this utility, many different forms or logos could be stored as images, and printed when needed, all
using the same standard blank paper, thus eliminating the need to stock many preprinted forms, and the
need for operators to stop the printer and change paper.
IEBISAM
- ISAM data set Program
1. Copy an ISAM data set directly from one DASD volume to another.
IEBPDSE
- PDSE Validation Program
IEBUPDTE
- Update Data Set Program
4. Change the organization of a data set from PS to PDS or PDSE, or the reverse.
IDCAMS
- Access Method Services Program
2. It probably has the most functionality of all the utility programs, performing many functions, for both
VSAM and non-VSAM les.
IEFBR14
- Branch to Reg. 14 Dummy Program
2. Normally inserted to JCL when the only desired action is allocation or deletion of datasets or JCL Syntax
checking for errors.
3. It consisted a single instruction a "Branch to Register" 14. The mnemonic used in the IBM Assembler was
BR and hence the name: IEF BR 14.
IEHATLAS
ICKDSF
- Device Support Facility Program
1. Installs, initializes and maintains DASD, either under an operating system, or standalone
2. It can also be used for such tasks as initializing disk volumes and detecting disk-related system errors.
IEHINIT
- Initialize Tape Program
1. Used to place standard volume label sets onto any number of magnetic tapes mounted on one or more
tape units
2. Multiple tapes may be labeled in one run of the utility. IBM standard (EBCDIC) or ASCII labels may be
written.
IEHLIST
- List System Data Program
1. A system utility used to list entries in the directory of one or more partitioned data sets or PDSEs, or
entries in an indexed or to list the contents of a Volume Table of Contents (VTOC).
IEHMOVE
- Move System DataProgram
2. On the surface, IEHMOVE may seen redundant to the IEBGENER and IEBCOPY utilities. However, IEHMOVE
is more powerful. The main advantage of using IEHMOVE is that you do not need to specify space or DCB
information for the new data sets. This is because IEHMOVE allocates this information based on the
existing data sets.
3. Another advantage of IEHMOVE is that you can copy or move groups of data sets as well as entire
volumes of data. Because of the ease in moving groups of data sets or volumes, the IEHMOVE utility is
generally favored by system programmers.
4. However, IBM does not recommend using the IEHMOVE utility in a DFSMS environment. DFSMSdss
should be used instead of IEHMOVE to move or copy data to volumes managed by the SMS. DFSMSdss or
IEBCOPY should be used to process PDSEs. You cannot use IEHMOVE with PDSEs, ISAM or VSAM data
sets, or large format sequential data sets.
IEHPROGM
- Program Maintenance Program
IEHSTATR
- List ESV Data Program
1. A system utility that formats and prints information from Type 21 SMF (system management facilities)
records.
References: IBM Manuals