Académique Documents
Professionnel Documents
Culture Documents
User Guide
TRACUT001
Revision: 1.00
http://www.queclink.com
sales@queclink.com
Firmware_Upgrade_Tool_Duplex User Guide
Revision: 1.00
Date: 2014-11
Status: Release
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has
k
not undertaken any independent search for additional relevant information, including any
information that may be in the customers possession. Furthermore, system validation of this
n
product designed by Queclink within a larger electronic system remains the responsibility of
l
subject to change.
c i
the customer or the customers system integrator. All specifications supplied herein are
a l
e i
Copyright
n t
This document contains proprietary technical information which is the property of Queclink
u
Limited., copying of this document and giving it to others and the using or communication of
the contents thereof, are forbidden without express authority. Offenders are liable to the
Q fide
payment of damages. All rights reserved in the event of grant of a patent or the registration of
a utility model or design. All specification supplied herein are subject to change without
notice at any time.
o n
C
TRACUT001 -1-
Firmware_Upgrade_Tool_Duplex User Guide
Contents
Contents ............................................................................................................................................ 2
Figure Index ...................................................................................................................................... 3
0. Revision history ............................................................................................................................ 4
1. Tool Introduction ........................................................................................................................... 5
1.1. System Requirements .......................................................................................................... 5
1.2. Tool Interface ...................................................................................................................... 5
1.2.1. Introduction of the UI ............................................................................................... 5
2. Upgrade Operation Instruction ...................................................................................................... 8
2.1. Step1_Upgrade Prepare ....................................................................................................... 8
2.2. Step2_Upgrade Tool Basic Setting ...................................................................................... 8
k
2.3. Step3_Power Off Device ................................................................................................... 10
n
2.4. Step4_Click Start Button ................................................................................................... 11
i
2.5. Step5_Connect Device to Upgrade Cable ......................................................................... 11
l ia l
2.6. Step6_Upgrade Process ..................................................................................................... 11
c
2.7. Step7_Upgrade Accomplishment ...................................................................................... 17
3. FQA............................................................................................................................................. 18
u e t
3.1. COM_PORT_OPEN_FAIL ............................................................................................... 18
3.2. CHANGE_BAUDRATE_FAIL ........................................................................................ 19
n
3.3. INCORRECT_ROM_LOAD ............................................................................................ 20
Q fide
3.4. DA_EXT_RAM_ERROR ................................................................................................. 21
3.5. DOWNLOAD_DA_FAIL or BROM_CMD_JUMP_FAIL .............................................. 22
3.6. Progress Bar Does Not Run............................................................................................... 23
o n
C
TRACUT001 -2-
Firmware_Upgrade_Tool_Duplex User Guide
Figure Index
n k
FIGURE 11: UI OF PRE-FORMAT ....................................................................................................... 13
FIGURE 12: UI OF DOWNLOAD BIN ................................................................................................ 14
i
l
FIGURE 13: UI OF ENTER META MODE IN UART ......................................................................... 14
l
FIGURE 14: UI OF BOOT META IN BROM STAGE ......................................................................... 15
c a
FIGURE 15: UI OF INIT CLEAR NV FILES ....................................................................................... 15
i
FIGURE 16: UI OF CLEAR NV SYS FILES ........................................................................................ 16
u e t
FIGURE 17: UI OF UPGRADE OK ...................................................................................................... 17
FIGURE 18: UI OF PORT ERROR ....................................................................................................... 18
n
FIGURE 19: UI OF BAUD RATE ERROR ........................................................................................... 19
Q fide
FIGURE 20: UI OF UPGRADE WITH INCORRECT SCATTER FILE PATH.................................... 20
FIGURE 21: UI OF UPGRADE WITH INCORRECT SCATTER FILE .............................................. 21
FIGURE 22: UI OF POWER SUPPLY OR USB ABNORMAL ........................................................... 22
FIGURE 23: UI OF POWER SUPPLY OR USB ABNORMAL ........................................................... 23
FIGURE 24: UI OF PROGRESS BAR DOES NOT RUN .................................................................... 24
o n
C
TRACUT001 -3-
Firmware_Upgrade_Tool_Duplex User Guide
0. Revision history
i n k
cl ia l
u e n t
Q fide
o n
C
TRACUT001 -4-
Firmware_Upgrade_Tool_Duplex User Guide
1. Tool Introduction
The tool can run in PC without install, and the operation system must be in the list below:
Windows 95
Windows 98
k
Windows 2000
Windows ME
n
Windows XP
Windows 7
Windows 8
cl i a l
e t i
Any upgraded version of the tool will be informed in advance and provided by Queclink.
u n
Q fide
1.2. Tool Interface
o n
C
TRACUT001 -5-
Firmware_Upgrade_Tool_Duplex User Guide
Basic Information
Select Area
Upgrade File
Show Area
Progress Show
i n k
l l
and Control Area
u
Q fide n
1.2.1.1. Basic Information Select Area
<COM Port>: Configure the port number of the serial port connect to the device.
n
<Baudrate>: Configure the baud rate for upgrading. It is recommended to select 460800 or above.
o
1.2.1.2. Upgrade File Show Area
C
Show all files related to the firmware to upgrade.
TRACUT001 -6-
Firmware_Upgrade_Tool_Duplex User Guide
i n k
l
Figure 2: UI of Stop Upgrade
<Progress Bar>:
e c ia l
t
Indicate progress of upgrading process.
u
Q fide n
o n
C Figure 3: UI of Progress Bar
TRACUT001 -7-
Firmware_Upgrade_Tool_Duplex User Guide
k
Upgrade Cable cable.
2 Upgrade Cable
n
for device Note: Please make sure upgrade cable
l i
always connect to PC.
e c ia l Make
cable can be
sure
Queclink will provide cable driver installer
PL2303_Prolific_DriverInstaller.exe.
t
3 Driver of Cable But driver also would be found
identified by
u
automatically in WIN 7 or above system
n
PC.
after insert upgrade cable to PC.
Q fide
Getting from Queclink.
Note:
Firmware for
3 Firmware File Normally we will compress the firmware
upgrade.
file to you. But please make sure
n
decompress this file.
o
Please refer to Chapter 1.1 system
4 Computer PC for short
requirements.
C
Queclink_Firmware
5 Upgrade tool Getting from Queclink.
_Upgrade_Tool_Duplex
Please make sure the upgrade cable is connected to the PC first. And then, open
Queclink_Firmware_Upgrade_Tool_Duplex and configure basic information on the tool,
including <COM Port>, <Baudrate>, and <Load FW Files>.
TRACUT001 -8-
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l Figure 4: UI of Port
u e n t
Q fide
o n
C Figure 5: UI of Baudrate
TRACUT001 -9-
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
Figure 6: UI of Selecting Scatter File
u e n t
Q fide
o n
C Figure 7: UI of Scatter File Selected
Make sure power off the device and the device is not connected to upgrade cable.
TRACUT001 - 10 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e n t Figure 8: UI of Starting Upgrade
Q fide
2.5. Step5_Connect Device to Upgrade Cable
Note:
o n
For GL500, it need connect device to upgrade cable, and then install battery in.
C
For GV300N, it needs external power supply after upgrade cable connected.
TRACUT001 - 11 -
Firmware_Upgrade_Tool_Duplex User Guide
Dialogue frames are shown in Figure 9, Figure 10, Figure 11, Figure 12, Figure 13, Figure 14,
Figure 15, Figure 16
i n k
cl ia l
u e n t
Q fide
Figure 9: UI of Download DA
o n
C
TRACUT001 - 12 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e n t
Figure 10 : UI of Download Bootloader
Q fide
o n
C
Figure 11: UI of Pre-Format
TRACUT001 - 13 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e n t Figure 12: UI of Download Bin
Q fide
o n
C
Figure 13: UI of Enter meta mode in uart
TRACUT001 - 14 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
Figure 14: UI of Boot meta in brom stage
u e n t
Q fide
o n
C
Figure 15: UI of Init clear nv files
TRACUT001 - 15 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e n t Figure 16: UI of Clear Nv Sys Files
Q fide
o n
C
TRACUT001 - 16 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e n t Figure 17: UI of Upgrade OK
Q fide
o n
C
TRACUT001 - 17 -
Firmware_Upgrade_Tool_Duplex User Guide
3. FQA
3.1. COM_PORT_OPEN_FAIL
i n k
cl ia l
u e n t
Q fide Figure 18: UI of Port ERROR
o n
Possible Reason Solution
C
COM port is occupied by other tools, this tool cannot open Release this COM in other
COM. tools.
Upgrade cable is not connected. Connect cable to PC.
This COM port is dead. Reboot PC.
TRACUT001 - 18 -
Firmware_Upgrade_Tool_Duplex User Guide
3.2. CHANGE_BAUDRATE_FAIL
i n k
cl ia l
u e n t
Q fide
Figure 19: UI of Baud rate ERROR
o n
C
TRACUT001 - 19 -
Firmware_Upgrade_Tool_Duplex User Guide
3.3. INCORRECT_ROM_LOAD
i n k
cl ia l
u e n t
Q fide
Figure 20: UI of Upgrade with Incorrect Scatter File Path
o n
C
TRACUT001 - 20 -
Firmware_Upgrade_Tool_Duplex User Guide
3.4. DA_EXT_RAM_ERROR
i n k
cl ia l
u e n t
Q fide
Figure 21: UI of Upgrade with Incorrect Scatter File
o n
C
TRACUT001 - 21 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e n t
Q fide
Figure 22: UI of Power supply or USB Abnormal
o n
C
TRACUT001 - 22 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e t
Figure 23: UI of Power supply or USB Abnormal
n
Q fide
Possible Reason Solution
Power supply is unstable. Obtain stable power supply.
USB abnormal Change PC or upgrade cable to obtain stable COM port
communication.
o n
3.6. Progress Bar Does Not Run
C
Follow the standard steps, in step 2.6, progress bar does not run in this step.
TRACUT001 - 23 -
Firmware_Upgrade_Tool_Duplex User Guide
i n k
cl ia l
u e n t
Figure 24: UI of Progress Bar Does Not Run
Q fide
Possible Reason Solution
Upgrade Cable Broken Change another upgrade cable to try;
Serial port problem 1) Make sure COM Port is available or try to change
another valid COM Port;
2) Reboot PC and try to upgrade once more.
o n
C
TRACUT001 - 24 -