Académique Documents
Professionnel Documents
Culture Documents
CEN/TC250
Parts
EU Legislation and
Standardisation
Implementation
Maintenance
Further Harmonization
Development
Glossary
Publications
Events
JRC support to
implementation and
development
Media News
The EN Eurocodes
The EN Eurocodes are a series of 10 European Standards, EN
1990 - EN 1999, providing a common approach for the design of
buildings and other civil engineering works and construction
products. They are the recommended means of giving a
presumption of conformity with the basic requirements of the
Construction Products Regulation for construction works and
products that bear the CE Marking, as well as the preferred
reference for technical specifications in public contracts. [more ]
Guidance for
countries adopting
the Eurocodes.
State-of-the-art
material to
elaborate maps for
seismic and climatic
actions for
structural design.
Experience of the
non-EU Balkan
countries on
elaboration of these
maps.
Download the
whole report
(13.86 MB)
Download (2.42M)
This document is a
report with worked
examples
presenting the fire
resistance
assessment of
structures
according to the
Presentations available for download.
Eurocodes. The
authors were
involved in the
preparation and/or
assessment of the
Eurocodes
structural fire
design parts. Each
chapter of the
report focuses on a
specific structural
material (i.e. steel,
concrete, masonry,
etc.) and addresses
the principles and
design methods followed by worked example(s). The provided
information illustrates the basic design methods through
examples of application. It will allow any designer to get a good
understanding about the fundamentals of the fire parts of the
Eurocodes and to carry out fire resistance assessments of
various structures.
The materials were prepared and presented at the workshop
"Eurocodes: Structural Fire Design" held on 27 28 November
2012 in Brussels, Belgium. The workshop was organized by
JRC with the support of DG ENTR and CEN, and in
collaboration with CEN/TC250 Horizontal Group - Fire.
The document is part of the Report Series 'Support to the
implementation, harmonization and further development of the
Eurocodes' prepared by JRC in collaboration with DG ENTR
and CEN/TC250 "Structural Eurocodes".
This document is a
report with worked
examples
summarizing the
general rules, basic
design principles
and design methods
for geotechnical
design following
Eurocodes. It
comprises an
overview of
Eurocode 7 with
focus on the design
requirements,
actions and design
situations, and limit
states. Different
aspects to be
considered for
designing shallow
foundations, gravity
walls, embedded walls and deep foundations are covered in
the report. The provisions of Eurocode 7 for ground
investigations and testing for geotechnical design, overall
investigations and testing for geotechnical design, overall
stability of and movements in the ground, slopes, hydraulic
failure modes and verifications against them are also
presented. The Annex contains worked examples to
Presentations available for download.
accompany the various chapters of this report.
The materials were prepared and presented at the workshop
Eurocode 7: Geotechnical Design held on 13-14 June 2013 in Seismic Design of Buildings
Dublin, Ireland. The workshop was organized by JRC with the
support of DG ENTR and CEN, and in collaboration with Workshop with worked examples
Lisbon, 10-11 February 2011
CEN/TC250/Sub-Committee 7 and Irelands Department of the
Environment, Community and Local government.
JRC Report: Bridge Design to Eurocodes - Worked The second level workshop, Training the
trainers, is organised by TAIEX with the
examples support of the Russian partners.
This JRC reports
presents in detail Design of Bridges
the design of a
bridge structure Workshop with worked examples
Vienna, October 4-6, 2010
following the
Eurocodes. It
summarizes
important points of
the Eurocodes for
the design of
concrete, steel and
composite road
bridges, including A 3-day workshop presented worked
examples comprehensively covering the key
foundations and aspects of bridge design.
seismic design,
utilizing a common Presentations available for download.
bridge structure as a
basis. The bridge
basis. The bridge
design worked
example was
presented at the
workshop "Bridge
Design to the Eurocodes", held on 4-6 October 2010 in Vienna,
Austria. The workshop was organized by JRC with the support
of DG ENTR and in collaboration with CEN/TC250/Horizontal
Group Bridges, the Austrian Federal Ministry for Transport,
Innovation and Technology and the Austrian Standards
Institute.
Eurocode Software
Prof. Francesco Biasioli form the Politecnico di Torino compiled
a list of commercial and freely available Eurocode software.
Upcoming Events
Top