Académique Documents
Professionnel Documents
Culture Documents
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Quantity
of items
Item Description Notes
included
in product
Printed Circuit Boards (PCB) or Printed Circuit With a surface greater than 10 sq cm 1
Assemblies (PCA)
Batteries All types including standard alkaline and lithium coin 2
or button style batteries
Mercury-containing components For example, mercury in lamps, display backlights, 0
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater Includes background illuminated displays with gas 1
than 100 sq cm discharge lamps
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Electrolytic Capacitors / Condensers measuring 0
greater than 2.5 cm in diameter or height
External electrical cables and cords 0
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants 0
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent 0
including liquids, semi-liquids (gel/paste) and toner chambers, and service stations.
EL-MF877-00 Page 1
Template Revision B
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision B
Step
1. Put the slate on support fixture. (Fig.1)
Fig.1
1 2 3 4
Fig.2
Step
1. Disassemble A, B case. (Fig.1 / Fig.2)
Fig.1
1
3
Fig.2
Step
1. Disconnect volume/B FFC, and rip
release paper on A case. (Fig.2)
Fig.1
Fig.2
Fig.4
Fig.3 Fig.5
Step
1. Rip the AL foil. (Fig.2)
AL Foil
Fig.2
Fig.3
Step
1. Loosen volume/B screw (6052B0203501) * 2.
(Fig.1)
Fig.1
AL Foil
Fig.3
Fig.2
Step
1. Disassemble power button (6051B0885201) ,
volume button (6051B0885401) , rotate
button (6051B0885301). (Fig.1)
Power
Volume
Rubber
Rotate
Fig.1
Step
Only for WWAN module
1. Rip all acid tapes. (Fig.1)
Acid Tape
Fig.1
Fig.2
Step
1. Disassemble WLAN antenna cable. (Fig.1)
Fig.1
Step
1. Rip the acid tapes.
Fig.1
Fig.2
Step
1. Loosen WWAN card screw (6052B0276401)
* 1. (Fig.1)
Fig.1
Step
1. Loosen WLAN card screw (6052B0276401)
* 1. (Fig.1)
Fig.1
Step
1. Loosen SSD module screw (6052B0276401)
* 1.
Fig.1
Step
1. Disconnect touch/B FPC, digitizer/B FFC
from M/B CNTR. (Fig.1 / Fig.2)
Touch/B FPC
Fig.1
Digitizer/B FFC
Fig.2
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Step
1. Loosen screw (6052B0203501) * 4.
(Fig.1 / Fig.2)
Fig.1 Fig.2
Step
1. Disassemble docking/B FPC. (Fig.1)
3
2
Docking/B CNTR
Fig.3
Fig.2
Step
1. Loosen smart card/B (1310A2627801) screw
(6052B0207001) * 2. (Fig.2)
Fig.1
4. Disconnect camera FPC. (Fig.3)
Smart card/B
Fig.2 FFC
Fig.3
Step
1. Disassemble DC-in cable (6017B0494901)
(Fig.1 / 2)
Fig.1
DC-in Speaker Speaker
cable Cable Cable
Fig.5
Fig.2
Fig.3 Fig.4
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Step
1. Disconnect home button/B FFC from MB
CNTR.(Fig.3)
Fig.1
4
1 2 3
Fig.2
Fig.3
Step
1. Loosen battery screw * 6 (6052A0034501).
1
4 3
2
6 5
Fig.1
Step
1. Disconnect the FPC.
2
1 3 4
Fig.1
Step
1. Rip the AL foil on frame. (Fig.4)
2. Loosen screw (6052B0203501) * 2. (Fig.4)
3. Disassemble the bracket (6053B1039901)
on home button/B. (Fig.4)
4. Disassemble the home button/B
(1310A2627101). (Fig.3)
5. Loosen screw (6052B0203501) * 1, then
disassemble DC-in module (6017B0494901).
(Fig.2)
Fig.1
DC-in
Home button/B
Fig.3
Fig.4
Fig.2
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Electric cross screwdriver (#0) 1
Step
1. Loosen speaker screw (6052A0034501) * 1,
(Fig.1)
2. Loosen screw (6052B0207001) * 3 (Fig.2)
3. Disassemble the M/B.
Fig.1
2
3
Fig.2 Fig.1
Step
1. Put the M/B on fixture. (Fig.1)
Fig.1
3 1
2 4
Fig.2
Step
1. Loosen screw (6052B0203501) * 1, then
disassemble the right speaker. (Fig.2)
Fig.3 Fig.3
Fig.1
Fig.2
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Electric cross screwdriver (#0) 1
Step
1. Loosen screw (6052B0203501) * 2, then
disassemble the left speaker. (Fig.2)
Fig.1
1
2
Fig.2
Step
1. Put the C case on fixture. (Fig.1)
Fig.1
2 5
3 4
1 6
Fig.2
Step
1. Loosen cover screw (6052B0276401) * 5.
(Fig.1)
5 3
4 1 2
Fig.1
Step
1. Put the machine on the fixture. (Fig.1)
Fig.1
Fig.2
Step
1. Put the C case on the fixture. (Fig.1)
Fig.1 8
3
1 2
3
4 1
5
Fig.2
Fig.2
Step
1. Put the C case on the fixture. (Fig.1)
8
1
3
3 2
4
6 Fig
.2
Fig.2
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Electric cross screwdriver (#1) 1
Step
1. Put the C case on the fixture. (Fig.1)
Fig.1
1. CFig.1
3
6 2. 7*7(6052B0185401),Fig.2
3.C 2
#1
1.5 0.2 Kgfcm
5 123 45 67
1
Fig.2
Step
1. Put the C case on the fixture. (Fig.1)
Fig.1
2
1
6 5
3 4
Fig.2
Step
1. Put the C case on the fixture. (Fig.1)
Fig.1
1
2
4
3
Fig.2
Step
1. Disassemble FFC from KB CNTR. (Fig.2)
Fig.1
Fig.2 Fig.3
Step
1. Turn over, then disassemble the keyboard.
(Fig.1/2)
Fig.1
Fig.2
Step
1. Put the C case on the fixture. (Fig.1)
4 2 3
Fig.1
Fig.2
Step
1. Put the C case on the fixture.
SD T/P
Fig.1
Step
1. Put the C case on the fixture. (Fig.1)
2. Disassemble DC-in CNTR. (Fig.4)
3. Disassemble the DC-in cable.
(Fig.3)
4. Disassemble SD card & T/P CNTR FFC .
(Fig.2)
Fig.1
Fig.3
SD T/P
Fig.2
Fig.4
Step
1. Disassemble hinge cable CNTR R.
Fig.1
Left
Right
Step
1. Put the C case on the fixture. (Fig.1)
Fig.1
Fig.2
Step
1. Put the C case on the fixture. (Fig.1)
Fig.1
Fig.2
Fig.4
Fig.3
Step
1. Put the C case on the fixture. (Fig.1)
Hinge Module 4
Fig.1
Step
1. Put the C case on the fixture.
Fig.2
Fig.1
Step
1. Put the C case on the fixture. (Fig.1)
2. Disassemble the membrane on T/P CNTR.
(Fig.2)
membrane
2 1
gasket
Fig.2
Step
1. Disassemble touch pad (6034B0021901).
(Fig.1)
Fig.1
Step
1. Disassemble hinge cap (6051B0886701).
(Fig.4)
Fig.1
Fig.2
Fig.3
Fig.4
Step
1. Rip the acid tape on hinge * 2. (Fig.3/ Fig.4)
1
Fig.1
Fig.2
Fig.3
Fig.4
Step
1. Put hinge on the fixture.
1
Fig.1
Step
1. Put hinge on the fixture. (Fig. 2)
2. Loosen screw (6052B0185401) * 4. (Fig.3)
Fig.2
3
Fig.3 2 4
Step
1. Put hinge (6055B0031701) on the fixture.
(Fig.1)
Fig.2
Fig.3
1 2
Fig.4
Step
1. Put hinge (6055B0031701) on the fixture.
(Fig.1)
Fig.1
2. Loosen screw (6052B0207001) * 4. (Fig.3)
Fig.2
1 2 3 4
Fig.3
Step
1. Loosen screw (6052A0034501) * 6. (Fig.1)
3 2 5 6
4
1
Fig.1
Step
1. Disassemble POM (6051B0924901) * 2.
(Fig.1)
Fig.1