Académique Documents
Professionnel Documents
Culture Documents
Disclaimer:
The product information & application details given by the company & its agents has been
provided in good faith and meant to serve only as a general guideline during usage.
Users are advised to carry out tests & trials to ensure on the suitability of
the products meeting their requirement prior to full scale usage
of our product. The Company does not assume any liability
or any consequential damage for unsatisfactory
results, arising from the use of
our products. WATERPROOFING
SYSTEMS
REPAIR AND
REHABILITATION
SYSTEMS
READY TO
USE FINISHES
PROTECTIVE
AND DECORATIVE
COATINGS CONCRETE
ADMIXTURES
AND GROUTING
PRODUCTS
Constrochem India Pvt. Ltd.
Address: 18/26, Dev Prayag CHS, Bhakti Mandir Road,
Near Hari Nivas Circle, Panchpakhadi, Thane (W) - 400 602.
Mob.: +91 9323244244 | Tel no.: 022 - 2539 3839 | Telefax.: 022 - 2539 2279
E-mail: enquiry@constrochmindia.com
GUBBI
CONSTRO CHEM PVT. LTD.
www.constrochemindia.com
The world is constantly evolving and so is the technology. We at CONSTROCHEM INDIA PVT. LTD. are focusing and
striving to change the way Construction Chemicals are used to solve the Civil Engineering challenges. We are
renowned name in the Mumbai Civil Engineering Industry is a team of likeminded specialized Civil Engineering &
Chemical Engineering professionals offering high quality solutions to all types of structural repairs, waterproong,
oorings and external coating cum painting needs of residential, commercial, industrial buildings and other
infrastructural facilities.
In the last two decades of continuous service, we could get the privilege to serve clients in almost all the spectrum in
the Indian industry. We also experimented with different types of Construction Chemicals and understood the typical
Our range of construction chemicals include
challenges faced by the Application team as well as the Clients & Consultants in selection as well as correct
application of the product.
Constrochem India Pvt. Ltd have a team of Research Technologists who through lot of research, external lab WATERPROOFING SYSTEMS 01
tests, product trials & feedback from some leading Structural Consultants have derived a set of products which are
technologically much advanced and also user friendly, they are reliable as well as cost effective.
We want to make a benchmark of being the Company which not only understands the Civil application, but also
empathizes with the limitations of the actual user and expectations of the Client. We believe in world class quality READY TO USE FINISHES 06
service using innovative technology that creates trends through value engineering. We believe in providing supreme
quality at competitive prices and within the stipulated time period so as to outperform in the realm of construction
chemicals with the help of our widespread network, knowledge and experience. PROTECTIVE & DECORATIVE COATINGS 09
We have established a state-of-the-art manufacturing facility that is well-equipped with the latest tools and
machinery. We have categorized our infrastructure into several parts such as processing, production, procurement,
testing, research & development and warehousing & packaging. For the easy work process, the installed machines CONCRETE ADMIXTURES & GROUTING PRODUCTS 10
and tools are regularly checked and upgraded according to the latest market changes. In our quality testing
departments, the offered range is inspected on dened quality parameters by utilizing sophisticated testing tools
and devices.
Constrochem India Pvt. Ltd. will ensure to have Client Satisfaction as its topmost priority and all our
products/services will be focused on the end user application ease & Customer Delight. Constrochem India Pvt.
Ltd. will be a brand to reckon in the days to come. We welcome your observations and feedback on our mail id:
enquiry@constrochemindia.com
WATER GUARD 2K
WATERPROOFING SYSTEMS
Polymer modied two part heavy duty waterproof coating
Areas Of Application:
WATER GUARD L Excellent as a waterproof coating for bathrooms, kitchen sinks, balconies,
etc.
Acrylic waterproong coating Ideal as a coating for waterproong of chhajjas, canopies, terraces etc.
As waterproof coating on internal sides of domestic water tanks
Areas Of Application: Good for waterproong of sloped roofs
Sunk portion of bathrooms, toilets, balconies etc.
Base coat for terrace waterproong Features & Benets:
Underground and Overhead water tanks WATER GUARD 2K is a two component Elastomeric elastomeric exible coating that accommodate cracks up to
modied acrylic polymer based
Mortars for lling joints of C. I. or any other drainage pipes cementitious waterproof coating
2 mm with an elasticity of 40-50%
As an admixture for providing waterproof plaster to external walls especially system, which on mixing and Low water permeability Excellent resistance to ingress of water
in high rise buildings hardening provides excellent water Adhesion excellent adhesion to concrete and masonry surfaces
resistant barrier. It offers excellent
As waterproof additive to any cement based paints used as a nishing coat Eco-friendly Non-toxic with low VOC content
resistance to both positive and
WATER GUARD L is most effective negative pressures. CFTRI certied as a potable water safe coating for waterproong of
waterproof coating mixed with cement Features & Benets: water tanks
to give 100% waterproof surface.
Improves waterproong properties when mixed with cement
Can be applied in moist conditions e.g: exteriors, terraces and chajjas in wet Packaging: 15 kgs. (10 kgs. Powder + 5 liters Liquid)
spells of monsoon, Underground and/or overhead water tanks almost
immediately after emptying Coverage: As a waterproong coating: 80 - 100 sq. ft. / pack in 2 coats
Alkaline and compatible with concrete
PU GUARD
Single component water based polyurethane waterproong
Areas Of Application:
WATER GUARD 45 Foundations, basements & lift pits
Terrace Gardens
High solid content (45%) acrylic waterproong coating Sunk portion of bathrooms, toilets, balconies, etc.
Car Decks, Podiums
Areas Of Application: Sewage Works & Sunken portions
Foundations, basements & lift pits
Terrace Gardens Features & Benets:
Sunk portion of bathrooms, toilets, balconies etc. PU GUARD is a single component, Cold curing, cures to a tough, exible and abrasion resistant coating
modied polyurethane, liquid applied
Bonds strongly on cement concrete, asbestos, mild steel, cement plastered
coating that is composed of specially
Features & Benets: developed polymers, properly selected applied surfaces
Bonds strongly on cement concrete, cement plastered applied surfaces and graded llers. It cures by reaction Thermal stability Irreversible chemical cure eliminates melting and ow at
Improves waterproong properties when mixed with cement with atmospheric moisture to give a high temperature
tough elastomeric waterproof
WATER GUARD 45 is a heavy duty Can be applied in moist conditions e.g: exteriors, terraces and chajjas in wet membrane. High elasticity - Cures to give a permanently exible resilient barrier for water
acrylic base waterproof coating which spells of monsoon, Underground and/or overhead water tanks almost over a wide range of temperatures
when mixed with cement forms a
durable and highly water-resistant
immediately after emptying High chemical resistance Excellent protection against corrosive soil
matrix to give 100% waterproof Alkaline and compatible with concrete conditions, resistance against saline water, mild acids and alkalies, high
surface. suphate resistance
Packaging: 1 kg, 5 kgs, 20 kgs and 200 kgs
Packaging: 1 kg, 5 kgs and 25 kgs
Coverage: As a waterproong coating: 30-35 sq. ft. / kg in 2 coats
Coverage: As a waterproong coating: 25 - 35 sq. ft. / kg in 2 coats
01 02
WATERCRETE GUARD STRUCTURE GUARD
Integral waterproong admixture for concrete & mortar High Strength Microconcrete
03 04
RUST GUARD CRACK GUARD PASTE
Rust remover for steel rebars Ready to use crack ller
Dosage: 1 kg CRACK GUARD PASTE covers 100 running feet of cracks of less
than 5 mm
CORRO GUARD
Surface applied bipolar concrete penetrating corrosion inhibitor
Advantages:
FLOOR HARD GUARD
CORRO GUARD is a surface applied corrosion inhibitor which is applied Non-metallic dry shake oor hardener
directly on old concrete surfaces to prevent further corrosion of
embedded steel rebars.
Areas Of Application:
CORRO GUARD is a multi functional inhibitor which controls the Warehouses
cathodic and anodic reactions. This dual action effect signicantly retards
Factories
both the onset and the rate of corrosion maintenance
Shopping malls
CORRO GUARD is applied as an impregnation by spray, roller or Parking areas and Podiums
brush onto the surface of the concrete. The corrosion inhibitor penetrates Restaurants and Hotels
into the concrete and protects the reinforcement by forming a protective lm
on the steel surface Advantages:
FLOOR HARD GUARD is a one part, Good wear resistance rating
pre mixed dry shake non metallic
Packaging: 1 lt, 5 ltrs and 20 ltrs Impact resistance
hardener for concrete comprising of
cement, specially selected natural Cost effective surface hardener
Coverage: 4 m2/lt mineral aggregates and admixtures. Ease of application - Pre-mixed powder, easy to dry shake & trowel
Corrosion resistant - Does not contain any ferrous aggregate, so no rusting &
erosion of oor
05 06
READYPLAST GUARD BLOCKFIX GUARD
Single pack ready to use cement sand plaster Single pack ready to use jointing material for AAC blocks,
concrete blocks etc.
Areas Of Application:
Plastering on block work, brick work and concrete substrates in new Areas Of Application:
construction As a block jointing mortar for internal and external walls of AAC Blocks,
External & Internal plastering application for repair and rehabilitation works Concrete Blocks and Fly Ash bricks
Advantages: Advantages:
Crack free & rm surface that preserves beauty of building for longer time Thinner jointing with high adhesion gives better quality and output of overall
Factory made product with consistent quality. Very less rebound loss masonry work
READYPLAST GUARD is crack Excellent waterproong characteristics BLOCKFIX GUARD is a polymer Factory made product with consistent quality
resistant premixed cement sand water Ready to use, only clean water to be added at site modied pre-mixed, easy to apply, No water curing is required at site
- tight plaster. It can be used on inner high quality Block joining mortar.
and outer walls. Sufciently exible to accommodate thermal and physical movements Specically designed to provide
Ready to use, only clean water to be added at site
strength and adhesion to walls Better bond than conventional cement based mortar
constructed by AAC blocks, y ash
Packaging: 40 kgs in moisture resistant bags
bricks, concrete blocks etc.
Packaging: 25 kgs in moisture-resistant bags
Coverage: For 10 to 12 mm thickness on block masonry coverage is approx.
20 to 24 sq. ft. Coverage: 100 - 110 sq. ft. @ 3 mm thickness for the block of size
600 x 200x150 mm
TILOFIX GUARD
Single pack ready to use tile adhesive
HACKPLAST GUARD
Bonding agent to aid the bonding of plaster on New/old
Areas Of Application: concrete
Tile on tile application for repair and rehabilitation works
Fixing ceramic, vitried and mosaic tiles on oor and wall surfaces Areas Of Application:
HACKPLAST GUARD is an acrylic polymer based bonding agent designed to
Advantages: act for better bonding qualities of plastering on old/new concrete. It aids in
Crack free, breakage free & rm surface that preserves beauty of tiling for minimizing the hacking process and also giving better bond strength with
longer time high design concrete. It also helps in reducing the shrinkage cracks if used in
Excellent waterproong characteristics
the mortar mix
TILOFIX GUARD is a ready to use grey Ready to use, needs no curing
cement based non-shrink, self-curing, Better bond than conventional cement based mortar Advantages:
water resistance tile adhesive for oor Excellent adhesion to most building substrates
tiles and wall tiles xing. Fast setting and quick strength development
Moisture resistant - offers excellent resistance to moisture ingress Improves the bond strength between plaster and concrete surface
Concrete can be plastered with minimum hacking thus saving labor costs
Packaging: 20 kgs in moisture resistant bags Ideal bonding agent for high strength concrete where normal plastering is not
possible
Improves exural, tensile and thin section fragility of cementitious systems
Coverage: 55 - 70 Sq.ft. / 25 Kg. Bag at 3 mm thickness
Self-curing
07 08
PAVER GUARD
PROTECTIVE & DECORATIVE COATINGS
Ready to use lacquer/sealer coat
Uses:
CARBONATION GUARD Paver Blocks
Tiles
Crack bridging & Anti-carbonation protective coating for concrete Stamped Concrete
Packaging: 1kg
09 10
CONFLOW GUARD S GROUT AID GUARD
Highly efcient water reducing super plasticizer Plasticised expanding grout additive
Dosage: 200 ml per 50 kg bag of cement. Optimum dosage can be determined Dosage: 330 gms. Per 50 kgs. of cement
by site trials
GROUT GUARD
Non shrink expanding cementitious grout
Areas Of Application:
To grout bearings, machine foundations, columns joints in precast CONCRETE
construction etc. ADMIXTURES
To grout anchoring bolts in concrete AND GROUTING
To grout tie rod holes of Aluminum Form work concreting, gaps and voids PROTECTIVE PRODUCTS
in concrete
AND DECORATIVE
COATINGS
Advantages:
READY TO
GROUT GUARD is a one part, pre Dual expansion system compensates for shrinkage and settlement in the
USE FINISHES
mixed cement based owable, two plastic state
stage expanding grout with selected REPAIR AND
Pre-packed material overcomes onsite batching variations
aggregate. GROUT GUARD is used as REHABILITATION
a machine foundation grout for high Develops high early strength without the use of chlorides
strength non shrink grouting to High ultimate strength ensure the durability of the hardened grout free ow SYSTEMS
maintain leveling of the Machines. WATERPROOFING
ensures high level of contact with load bearing area
Expands by gas generation whilst in the plastic state of curing SYSTEMS
Impact- and vibration resistant Increased resistance to oils and grease
GUBBI
CONSTRO CHEM PVT. LTD.
11
POUCH