Académique Documents
Professionnel Documents
Culture Documents
Cutting
Thickness Tolerance Cutting Tolerance
8mm to 14mm ( -0.5/+1.2mm ) 15 mm to 24mm ( -0.6/+1.3mm ) 25 mm to 39mm ( -0.8/+1.4mm ) S (-1/+2) D (3) L (2)
S D L1
Shell no TRACEABILITY Actual S1 Actual S2 Actual S3 Actual S4 Actual S5 Dif D1 Dif D2 Actual L2 THEORITICAL Actual Thick Reqd Thick actual
Theoritical Theoritical Theoritical
H-
P-
Bevelling Root welding
Beveling
B2 Root B3 Root B4 Root
Shell no B1 Angle B1 Root face B2 Angle
face
B3 Angle
face
B4 Angle
face
Visual operator / Coil batch No:
Sign / Date
Welder's Travel Gas Flow VT repair
Amps Volts
ID Speed Rate length
Rolling Re-Rolling
SHELL FIT UP OCF (theoritical / actual) Ovality
Template
Top Bottom Bottom
Shell no Mismatch Root gap Template Gap Operator Sign/Date
(T)
Top (A)
(T) (A) 1-1' 2-2' 3-3' 4-4' 5-5' Diff Gap
Cleared
By(Sign/Date)
VT Inspector's
Sign & Date
VT Inspector's
Sign & Date
MT Inspector's
Sign & Date
UT Inspector's
Sign & Date
Material Traceability Report - Shells
Model Name : Customer Name : Sheet 01 of 01 Date:
Cutting
Thickness Tolerance Cutting Tolerance
Upto 24mm (-0.3/+1.3mm) 25 mm to 39mm (-0.3/+1.7mm) Above 40mm (-0.3/+2.3mm) S (-1/+2) D (3) L (2)
Rolling Re-Rolling
OCF (Theoretical / Actual) Record at
SHELL FIT UP Ovality
fitup and after welding Template Cleared By
Top Bottom Gap (Sign & Date)
Shell No. Mismatch Root Gap Template Gap Operator's Sign & Date
(T)
Top (A) Bottom (T)
(A) 1-1' 2-2' 3-3' 4-4' 5-5' Diff