0 évaluation0% ont trouvé ce document utile (0 vote)
16 vues2 pages
Remove and install the transmission parts as shown. Check that the torque converter clutch is installed at the correct distance of 18.0 mm from the transmission housing. Adjust the transmission throttle cable and fill the transmission with new ATF DEXRON II, taking care not to overfill.
Remove and install the transmission parts as shown. Check that the torque converter clutch is installed at the correct distance of 18.0 mm from the transmission housing. Adjust the transmission throttle cable and fill the transmission with new ATF DEXRON II, taking care not to overfill.
Remove and install the transmission parts as shown. Check that the torque converter clutch is installed at the correct distance of 18.0 mm from the transmission housing. Adjust the transmission throttle cable and fill the transmission with new ATF DEXRON II, taking care not to overfill.
AUTOMATIC TRANSMISSION Removal and Installation of Transmission
REMOVAL AND INSTALLATION OF
TRANSMISSION Remove and install the parts as shown. AT160 AUTOMATIC TRANSMISSION Removal and Installation of Transmission
(Contd)
(MAIN POINT OF INSTALLATION)
1. CHECK TORQUE CONVERTER CLUTCH INSTALLATION Using calipers and a straight edge, measure from the in stalled surface of the torque converter clutch to the front surface of the transmission housing. Correct distance: 18.0 mm (0.709 in.) If the distance is less than the standard, check for an im proper installation.
2. ADJUST TRANSMISSION THROTTLE CABLE
(See page AT116) 3. FILL TRANSMISSION WITH ATF AND CHECK FLUID LEVEL Fluid type: ATF DEXRON II