Académique Documents
Professionnel Documents
Culture Documents
1.1.1. Input Signals (supplied to the ODU via its input connector):
1.1.1.1. DC power
1.1.1.2. IF in
2. Characteristics
The following subparagraphs define the performance and physical characteristics.
Page 2 of 7
2.1.2. Output Characteristics
Page 3 of 7
2.1.4. LO Characteristics
Page 4 of 7
2.1.5. DC Characteristics
2.3.1. Configuration
The unit shall be Feed mount.
2.3.2. Dimensions
The dimensions of the units will not exceed the maximum
dimensions shown in figure 4.
The dimensions and Outline of the unit shall comply with the
requirements specified in source control drawing.
2.3.3. Connectors
Connectors shall as follow:
2.3.4. Weight
The weight of the Ku-band transmitter shall be less than 5K grams.
2.3.5. Sealing
Page 5 of 7
The unit should be environmentally sealed (connectors, covers and
wave guide port) against humidity, rain, dust and sand for the lifetime
of unit.
Page 6 of 7
Figure 4 : Maximal unit dimensions
Page 7 of 7