Académique Documents
Professionnel Documents
Culture Documents
Standards
ISO1167-3:2007*
Part 1: General method
ISO1167-4:2007*
Part 2: Preparation of pipe test pieces
ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing
polyethylene systems - Part 2: Electrofusion
En poursuivant votre navigation sur ce site, vous acceptez lutilisation de cookies destins vous garantir la meilleure
ISO 13480:1997 Polyethylene pipes - Resistance to slow crack growth -
exprience sur ce site et mesurer son audience [ok]
https://www.pe100plus.com/PEPipes/PEtechnicalguidance/model/iso/r1035.html 3/12
2017628 StandardsHighqualityPolyethylenePipes&HDPEPipesPE100+Association
EN 1555-4:2011
Part 2: PipesPlastics piping systems for the supply of
En poursuivant votre navigation sur ce site, vous acceptez lutilisation de cookies destins vous garantir la meilleure
exprience sur ce site et mesurer son audience [ok]
https://www.pe100plus.com/PEPipes/PEtechnicalguidance/model/iso/r1035.html 5/12
2017628 StandardsHighqualityPolyethylenePipes&HDPEPipesPE100+Association
Product and test method standards are developed by CEN for Europe and ISO for global use. ISO/TC
138 and CEN/TC 155 Technical Committees are responsible for ISO and EN standards for plastics pipes
systems respectively. The TCs are split into Sub-committees and Working Groups for specific
applications and test methods. It takes several years to develop a standard to publication and these are
reviewed every 3 to 5 years and revised if required.
ISO 4427-1:2007, Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part
1: General
ISO 4427-2:2007, Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part
2: Pipes
ISO 4427-3:2007, Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part
3: Fittings
ISO 4427-5:2007, Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part
5: Fitness for purpose
1 ISO 4437 is being revised in the 5 part format and expected to be published in 2014, ie Part 1
General, Part 2 Pipes, Part 3 Fittings, Part 4 Valves, Part 5 Fitness for purpose.
ISO 15494:2003: Plastics piping systems for industrial applications Polybutene (PB), polyethylene
(PE), polyethylene of raised temperature resistance (PERT), crosslinked polyethylene (PE-X),
polypropylene (PP) Specifications for components and the system - Metric series (In revision)
ISO 1043-1:2011*, Plastics Symbols and abbreviated terms Part 1: Basic polymers and their
special characteristics
ISO 1133-1:2011*, Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-fl
ow rate (MVR) of thermoplastics Part 1: Standard method
ISO 1183-1:2012*, Plastics Methods for determining the density of non-cellular plastics Part 1:
Immersion method, liquid pyknometer method and titration method
ISO 1183-2:2004*, Plastics Methods for determining the density of non-cellular plastics Part 2:
Density gradient column method)
ISO 2505:2005*, Thermoplastics pipes Longitudinal reversion Test method and parameters
ISO 6259-1:1997*, Thermoplastics pipes Determination of tensile properties Part 1: General test
method
ISO 6259-3:1997, Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes
ISO 6964:1986, Polyolefin pipes and fittings Determination of carbon black content by calcination
and pyrolysis Test method and basic specification
ISO 10838-1:2000 **), Mechanical fittings for polyethylene piping systems for the supply of gaseous
fuels Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm
ISO 10838-2:2000 **, Mechanical fittings for polyethylene piping systems for the supply of gaseous
fuels Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm
ISO 10838-3:2001 **, Mechanical fittings for polyethylene piping systems for the supply of gaseous
fuels Part 3: Thermoplastic fittings for pipes of nominal outside diameter less than or equal to 63
mm
ISO 11413:2008, Plastics pipes and fittings Preparation of test piece assemblies between a
polyethylene (PE) pipe and an electrofusion fitting
ISO 11922-1:1997, Thermoplastics pipes for the conveyance of fluids Dimensions and tolerances
Part 1: Metric series
ISO 13950:2007, Plastics pipes and fittings Automatic recognition systems for electrofusion joints
ISO 13951:2001, Plastics piping systems Test method for the resistance of polyolefin pipe/pipe or
pipe/fitting assemblies to tensile loading
ISO 13953:2001, Polyethylene (PE) pipes and fittings Determination of the tensile strength and
failure mode of test pieces from a butt-fused joint
ISO 13954:1997, Plastics pipes and fittings Peel decohesion test for polyethylene (PE) electrofusion
assemblies of nominal outside diameter greater than or equal to 90 mm
ISO 13955:1997, Plastics pipes and fittings Crushing decohesion test for polyethylene (PE)
electrofusion assemblies
En poursuivant votre navigation sur ce site, vous acceptez lutilisation de cookies destins vous garantir la meilleure
exprience sur ce site et mesurer son audience [ok]
https://www.pe100plus.com/PEPipes/PEtechnicalguidance/model/iso/r1035.html 8/12
2017628 StandardsHighqualityPolyethylenePipes&HDPEPipesPE100+Association
ISO 13956:2010, Plastics pipes and fittings Determination of cohesive strength Evaluation of
ductility of fusion joint interface by tear test
ISO 13957:1997, Plastics pipes and fittings Polyethylene (PE) tapping tees Test method for
impact resistance
ISO 13968:2008, Plastics piping and ducting systems Thermoplastics pipes Determination of ring
flexibility
ISO 16871:2003, Plastics piping and ducting systems Plastics pipes and fittings Method for
exposure to direct (natural) weathering
ISO 18553:2002, Method for the assessment of the degree of pigment or carbon black dispersion in
polyolefin pipes, fittings and compounds
ISO 21751:2011, Plastics pipes and fittings Decohesion test of electrofusion assemblies Strip-bend
test
EN 1716;1997, Plastics piping systems Polyethylene (PE) tapping tees Test method for impact
resistance of an assembled tapping tee
EN 12106:1997, Plastics piping systems Polyethylene (PE) pipes Test method for the resistance
to internal pressure after application of squeeze-off
EN 12117:1997, Plastics piping systems Fittings, valves and ancillaries Determination of gaseous
flow rate/pressure drop relationships
** These standards are under revision and will be replaced by ISO 17885
En poursuivant votre navigation sur ce site, vous acceptez lutilisation de cookies destins vous garantir la meilleure
exprience sur ce site et mesurer son audience [ok]
https://www.pe100plus.com/PEPipes/PEtechnicalguidance/model/iso/r1035.html 9/12
2017628 StandardsHighqualityPolyethylenePipes&HDPEPipesPE100+Association
The plastics pipes industry revolves around specifications and standards for the products and test
methods to verify performance. Pipe systems are one of the most critical applications for
thermoplastics materials with a design lifetime of 50 years and expected lifetime in excess of 100
years. Products must be fit for purpose and the end user needs confidence in the product in order to
specify them. Specifications and dimensions must be universal and methods of test need to be
standardised. The industry has put in a great deal of effort over many years to develop reliable
methods.
Product and test method standards are developed by CEN for Europe and ISO for global use. ISO/TC
138 and CEN/TC 155 Technical Committees are responsible for ISO and EN standards for plastics pipes
systems respectively. The TCs are split into Sub-committees and Working Groups for specific
applications and test methods. It takes several years to develop a standard to publication and these
are reviewed every 3 to 5 years and revised if required.
ISO1167-
1:2006*
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the
ISO1167- resistance to internal pressure - Part 1: General methodThermoplastics pipes, fittings and
2:2006* assemblies for the conveyance of fluids - Determination of the resistance to internal pressure -
Part 2: Preparation of pipe test piecesThermoplastics pipes, fittings and assemblies for the
ISO1167- conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of
3:2007* componentsThermoplastics pipes, fittings and assemblies for the conveyance of fluids -
Determination of the resistance to internal pressure - Part 4: Preparation of assemblies
ISO1167-
4:2007*
Thermoplastics pipes - Resistance to chemical fluids - Classification: Part 1: Immersion test
ISO 4433:1997
method; Part 2: Polyolefin pipes
ISO 4437:2007 Buried polyethylene (PE) pipes for the supply of gaseous fuels - Metric series - Specifications
Plastics piping and ducting systems - determination of long term hydrostatic strength of
ISO 9080:2003
thermoplastics materials in pipe form by extrapolation
PE/metal and PP/metal adapter fittings for pipes for fluids under pressure - Design lengths and
ISO 9623:1997
size of threads - Metric series
Thermoplastics pipes for fluids under pressure - Mating dimensions of flange adapters and loose
ISO 9624:1997
backing flanges
En poursuivant votre navigation sur ce site, vous acceptez lutilisation de cookies destins vous garantir la meilleure
Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece
ISO 11414:2009
assemblies by butt fusion
exprience sur ce site et mesurer son audience [ok]
https://www.pe100plus.com/PEPipes/PEtechnicalguidance/model/iso/r1035.html 10/12
2017628 StandardsHighqualityPolyethylenePipes&HDPEPipesPE100+Association
ISO 12162:2009 Thermoplastics materials for pipes and fittings for pressure applications - Classification and
designation - overall Service (Design) coefficient
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt
ISO 12176-1:2006
fusion
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2:
ISO 12176-2:2008
Electrofusion
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 3: Operator's
ISO 12176-3:2011
badge
Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4:
ISO 12176-4:2003
Traceability coding
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack
ISO 13477:2008*
propagation (RCP) - Small-scale steady-state test (S4 test)
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack
ISO 13478:2007*
propagation (RCP) - Full-scale test (FST)
Polyolefin pipes for the conveyance of fluids - Determination of the resistance to crack
ISO 13479:2009*
propagation - Test method for slow crack growth on notched pipes (notch test).
ISO 13480:1997 Polyethylene pipes - Resistance to slow crack growth - Cone test method
Plastics pipes and fittings - Pressure reduction factors for polyethylene pipeline systems for use
ISO 13761:1996
at temperatures above 20 C
ISO 14040:2006 Environmental management -- Life cycle assessment -- Principles and framework
Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene
ISO 14236:2000
pressure pipes in water supply systems
ISO/TR10358:1993 Plastics pipes and fittings - Combined chemical resistance classification table
IS0/TR11647:1996 Fusion compatibility of polyethylene (PE) pipes and fittings
ISO/TS Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design,
10839:2000 handling and installation
EN 1555-1:2010
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Part 1:
EN 1555-2:2010 GeneralPlastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Part 2:
PipesPlastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Part 3:
EN 1555-3:2010
FittingsPlastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Part 4:
EN 1555-4:2010 ValvesPlastics piping systems for the supply of gaseous fuels. Polyethylene (PE) - Part 5: Fitness
for purpose
EN 1555-5:2010
En poursuivant votre navigation sur ce site, vous acceptez lutilisation de cookies destins vous garantir la meilleure
exprience sur ce site et mesurer son audience [ok]
https://www.pe100plus.com/PEPipes/PEtechnicalguidance/model/iso/r1035.html 12/12