Académique Documents
Professionnel Documents
Culture Documents
INTERNATIONAL IEC
STANDARD 60076-2
Second edition
1993-04
Power transformers
Part 2:
Temperature rise
Reference number
IEC 60076-2:1993(E)
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 1/8
30/6/2017 Scribd
INTERNATIONAL IEC
STANDARD 60076-2
Second edition
1993-04
Power transformers
Part 2:
Temperature rise
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 2/8
30/6/2017 Scribd
CONTENTS
age
FOREWORD
lause
1 Scope 7
2 Normative references 7
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 3/8
30/6/2017
3
dentification symbo ls according to cooling method
Scribd
4 emp erature-rise limits 11
4.1 eneral 11
4.2 Normal temperature-rise limits at continuous rated power 11
4.3 Modified requirements because of unusual service conditions 15
4.4 Temperature rise during a specified load cycle 17
5 .1 eneral 17
5.2 Test methods for temperature-rise determination 19
5.3 Determination of oil temperatures 25
5.4 Determination of average winding temperature 27
5.5 Determination of winding temperature before shutdown 29
5.6 Corrections 29
Annexes
A ote on oil temperature in transformers with forced oil circulation 31
POWER TRANSFORMERS
FOREWORD
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 4/8
30/6/2017 Scribd
2 ) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the su bjects dealt with.
3 ) They have the form of recommendations for international use published in the form of standards, technical
reports or guides and they are accepted by the National Committees in that sense.
4 ) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
This part of International Standard IEC 76 has been prepared by IEC technical committee
14 : Power transformers.
This second ed ition cancels and replaces the first edition published in 19 76 .
14(CO)76 14(CO)78
Full information on the voting for the approval of this standard can be found in the repo rt
IEC 76 consists of the following pa rt s, under the gen eral title: Power transformers.
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 5/8
30/6/2017 Scribd
document
IEC60076-7
document
119901863-info-iec60072-2-ed1-0-b-img
document
IEC 62317-8-2006
document
info_iec61463{ed1.1}b[1]
document
As 5013.8-2004 Food Microbiology Meat and Meat Products - Detection and Enumeration of Enterobacteriaceae Wit
document
SS 555-1-2010 - Preview.pdf
document
iec60038{ed6.2}en_d
document
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 6/8
30/6/2017 Scribd
As NZS 60335.2.4-2010 (IEC TEXT) Household and Similar Electrical Appliances - Safety Particular Requirements
document
62053 - 22
document
As NZS 60335.2.89-2010 (IEC TEXT) Household and Similar Electrical Appliances - Safety Particular Requirement
document
iec62271-111{ed1.0}en
document
As ISO IEC 17010-2003 General Requirements for Bodies Providing Accreditation of Inspection Bodies
document
iec60076-1
document
As 4459.1-1999 Methods of Sampling and Testing Ceramic Tiles Sampling and Basis for Acceptance
document
info_iec60335-2-56{ed3.0}en
document
info_iec60534-4{ed3.0}b.pdf
document
Modeling Names
document
As 2788-2002 Pneumatic Fluid Power - General Requirements for Systems (ISO 4414-1998 MOD)
document
BS IEC 62233-2005
document
iec61400-13{ed1.0}en
document
IEC 60072-1
document
info_iec62263{ed1.0}b
document
ISO 14118 - Safety of MachinerISO 14118 - Safety of machinery Prevention of unexpected start-up.pdfy Prevention of Unexpected Start-up
document
274132563-IEC-60076-2-pdf.pdf
Skip carousel
document
electrical engineering
document
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 7/8
30/6/2017 Scribd
Abstrak
document
DAFTAR ISI
https://www.scribd.com/fullscreen/341863621?access_key=key-9fcygt0Lj4UMon6tgdjL 8/8