Académique Documents
Professionnel Documents
Culture Documents
03 64 00 Injection Grouting
Maintenance of
31 01 70
Tunneling and Mining
31 31 73 00 Tunnel Grouting
MasterRoc MP 307 CE
Low-viscosity, fast-reacting acrylic resin for permanent water
sealing and layer curtaining of concrete and masonry
Formerly MEYCO MP 307 CE*
Description Features
MasterRoc MP 307 CE Very low viscosity
acrylic resin is a highly Controlled gel time between 3 and 22 minutes at 68 F (20 C)
reactive two-component
Workable between 41 F (5 C) to 104 F (40 C)
acrylic resin with a
low viscosity for good Superior flexibility (Elongation at break >300%)
penetration. The product Good chemical resistance against acids, bases, solvents, fuels, etc.
cures quickly, forming Good bond strength to fractured rock and concrete, even under wet conditions
a rubber-like resin with
the ability to withstand
Benefits
certain ground and crack
movement. MasterRoc Environmentally preferable harmless in contact with ground water
MP 307 CE acrylic resin Low viscosity allows deep penetration into very fine fissures and cracks
is especially designed for Good assimilation to ground movements or settlements
concrete repair and is CE-
certified according to EN Durability of more than 10 years
1504-5. Watertightness up to more than 12 bar (174 psi [1.2 MPa])
Non-corrosive
Applications Not sensitive to water and closely retains its original shape
Recommended for use in: (maximum change of mass -15% to +20%)
Concrete repair as
swelling fitted filling of
cracks and fissures (EN
1504-5: category S)
Permanent sealing of
tunnel linings, shafts
and masonry against
static ground water
pressure of more than
12 bar (1200 kPa)
Stopping minor water
inflow
Injection of injection
hoses
Ground stabilization
Curtain injection
MasterRoc MP 307 CE Technical Data Sheet
BASF Corporation
Admixture Systems
www.master-builders-solutions.basf.us page 2 of 3
MasterRoc MP 307 CE Technical Data Sheet
* MEYCO MP 307 CE became MasterRoc MP 307 CE under the Master Builders Solutions brand, effective October, 2013.