Académique Documents
Professionnel Documents
Culture Documents
6.5
171.00.4
100
145
4.3 (x4)
8.5 (x4)
159
75
86
Specs :
FEATURES Nominal Impedance 4 Free air resonance, Fs 31.5 Hz
Rohacell/Carbon fibre sandwich cone for DC resistance, Re 3.1 Sensitivity (2.83 V / 1 m) 90 dB
optimized stiffness/damping ratio Voice coil inductance, Le 0.13 mH Mechanical Q-factor, Qms 4.32
Vented cast aluminum chassis for optimum
strength and low compression Effective piston area, Sd 118 cm 2 Electrical Q-factor, Qes 0.35
Low damping rubber surround for improved Voice coil diameter 35.5 mm Total Q-factor, Qts 0.32
transient response Voice coil height Moving mass incl.air, Mms 14.2 g
16 mm
Non-conducting fibre glass voice coil former
for minimum damping Air gap height 5 mm Force factor, Bl 5.0 Tm
Extended copper sleeve on pole piece for Linear coil travel (p-p) 11 mm Equivalent volume, Vas 35.5 liters
low inductance and low distortion Magnetic flux density 1.80 mm/N
1.0 T Compliance, Cms
CCAW voice coil for reduced moving mass
Long life silver lead wires Magnet weight 0.54 kg Mechanical loss, Rms 0.65 kg/s
Vented pole piece for reduced compression Net weight 1.56 kg Rated power handling* 60 W
* IEC 268-5, T/S parameters measured on drive units that are broken in.
110 80
105 73
100 67
95 60
90 53
85 47
Ohm
80 40
dB
75 33
70 27
65 20
60 13
55 7
50 0
20 50 100 200 500 1k 2k 5k 10k 20kHz
(IEC baffle, mic. distance 31.6 cm, SPL shown for 2.83 V / 1 m)
REV.3 (02.06.2017)
Response Curve :
------ (Blue) : on axis ------ ( Green ) : 30 off-axis --------- (Red) : 60 off-axis