Vous êtes sur la page 1sur 1

SPECIFICATION FOR SEAMLESS CARBON STEEL

PIPE FOR HIGH-TEMPERATURE SERVICE

SA-106

(Identical with ASTM A 106-95 except for editorial differences in 8.1, 13.4, and 24.1 and the deletion of ASTM caveat 1.5.)

1. Scope NOTE 3 The dimensionless designator NPS (nominal pipe size) has
been substituted in this standard for such traditional terms as nominal
1.1 This specification covers seamless carbon steel diameter, size, and nominal size.
pipe for high-temperature service (Note 1) in NPS 18 to
1.5 DELETED
NPS 48 inclusive, with nominal (average) wall thickness
as given in ANSI B36.10. Pipe having other dimensions
may be furnished provided such pipe complies with all
other requirements of this specification. Pipe ordered 2. Referenced Documents
under this specification shall be suitable for bending, 2.1 ASTM Standards:
flanging, and similar forming operations, and for welding. A 520 Specification for Supplementary Requirements for
When the steel is to be welded, it is presupposed that a Seamless and Electric-Resistance-Welded Carbon
welding procedure suitable to the grade of steel and Steel Tubular Products for High-Temperature Service
intended use or service will be utilized (Note 2). Conforming to ISO Recommendations for Boiler Con-
struction
NOTE 1 Consideration should be given to possible graphitization A 530/A 530M Specification for General Requirements
of the material at the higher temperatures at which it may be used. for Specialized Carbon and Alloy Steel Pipe
E 29 Practice for Using Significant Digits in Test Data
NOTE 2 Grade A rather than Grade B or Grade C pipe should be
used for close coiling, or cold bending. The purpose for which the pipe
to Determine Conformance With Specifications
is to be used should be stated in the order. This note is not intended E 213 Practice for Ultrasonic Examination of Metal Pipe
to prohibit the cold bending of Grade B seamless pipe. and Tubing
E 309 Practice for Eddy-Current Examination of Steel
1.2 Supplementary requirements (S1 to S4) of an Tubular Products Using Magnetic Saturation
optional nature are provided for seamless pipe intended E 381 Method of Macrotech Testing, Inspection, and Rat-
for use in applications where a superior grade of pipe ing Steel Products, Comprising Bars, Billets, Blooms,
is required. These supplementary requirements call for and Forgings
additional tests to be made and when desired shall be so E 570 Practice for Flux Leakage Examination of Ferro-
stated in the order. magnetic Steel Tubular Products

1.3 When these products are to be used in applications 2.2 ANSI Standard:
conforming to ISO Recommendations for Boiler Con- ANSI B36.10 Welded and Seamless Wrought Steel Pipe
struction, the requirements of Specification A 520 2.3 Military Standards:
(Mechanical Property Requirements Section) shall sup- MIL-STD-129 Marking for Shipment and Storage
plement and supersede the requirements of this specifi- MIL-STD-163 Steel Mill Products, Preparation for Ship-
cation. ment and Storage
1.4 The values stated in inch-pound units are to be 2.4 Federal Standard:
regarded as the standard. Fed. Std. 123 Marking for Shipments (Civil Agencies)

205

Copyright ASME International


Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS Not for Resale

Vous aimerez peut-être aussi