Académique Documents
Professionnel Documents
Culture Documents
Pranshu Gupta
ARVIND LIFESTYLE APPARELS -SHIRTING DIVISION
Arvind Lifestyle-Shirting Division (E-City)
1. SPREADING
The rolls should be selected according to shade, shrinkage and width wise by the quality personnel. It
should be done prior to the spreading.
The information about the selected rolls should be given to the fabric store, so that they keep the rolls
in advance and there will be no delay in the operation.
The helpers who bring the rolls to the spreading table should open the rolls and keep in the same
direction in which the spreading is taking place.
The spreaders should be given a target that could be achievable so that the pressure is not put on the
spreaders.
CUTTING
SOLID FABRIC
The stickers should be printed before the spreading and then it should be pasted directly.
The small parts should be given immediately to the band knife cutters.
CHEK FABRIC
The stickers should be printed before the spreading and then it should be pasted directly.
RELAY
Numbering Should be done
Give the respective parts to straight knife cutting operator and band knife cutting operator
POCKET MARKING
Take the desired hard pattern of the style or by laser
NUMBERING
Open the parts came from cutting
Write down the start and ending number on the register provided with style no. mentioned in it.
Match the no. of lays with the total numbers (Ending no.-Starting no. +1) they have entered on the
bundle.
Arvind Lifestyle-Shirting Division (E-City)
QUALITY CHECKING
Check whether numbering is proper
Check the edges of the panels (If found any discrepancy, send it to recutting)
BUNDLING
It should be done in a group of three.
Check the starting number and the ending number written on the label
Make a bundle.
Arvind Lifestyle-Shirting Division (E-City)
FINAL AUDITING
Take the desired hard pattern of the style
Check the number of parts written on the hanging sticker with the number of parts present in the
bundle
Make the bundle and send it to the cut part storage area