Académique Documents
Professionnel Documents
Culture Documents
Highlights MegaRAC MG9070 chip manages per-gigabyte SATA drives, giving system
> Supports up to 4 SAS/SATA drives hot-swap SAS/SATA-II backplanes with builders the flexibility to integrate either
> Drive Activity, Rebuild & Fail LEDs enclosure management, ideal for cost-sen- SAS or SATA devices while slashing the
> Supports Ready LED Signal from sitive and performance-oriented system costs associated with supporting two
Drive designs. The device is compatible with separate interfaces. As the next genera-
> Manages drive presence adapters supporting Enclosure Manage- tion of SCSI, SAS bridges the parallel
> Global activity & Global Fail indica-
ment Protocol for Promise SATA HBA technology gap in performance, scal-
tion or SAS adapters with SGPIO interface. ability and affordability.
> SGPIO protocol support to interface Each MG9070 has one SGPIO port that The SAS interface is designed to be
to SAS/SATA HBA can communicate enclosure management compatible with the Serial ATA (SATA)
> Enclosure Management Protocol information to the SAS host bus adapter, interface at physical layer level. This al-
support for Promise HBA support LED management and detect lows SAS or SATA drives to be plugged
> Number of supported drives can drive presence for up to four drives. into a SAS backplane, which reduces de-
easily be increased by a factor of Serial Attached SCSI (SAS) and Seri- sign and inventory costs for backplane
4 by adding similar chips in case of
al ATA are the latest storage interconnect manufacturers.
SGPIO interface
standards, introducing higher speeds, A backplane required to support only
> Support for maximum of 8 drives in
case of Promise protocol more robust data integrity, smaller de- four drives can have just one MG9070.
signs and wider standardization. The SAS By adding more devices, the backplane
> Two SMBus ports and one SGPIO
port interface is compatible with lower-cost- can manage 8, 16 drives or more.
SDA_HBA
SCL_HBA
SDATAOUT
SDATAIN
SCLOCK
SDA
SCL
SLOAD
Ready
Ready
GREEN1
GREEN2
GREEN3
GREEN4
FAIL2
FAIL4
LED4
FAIL3
Ready
LED2
LED3
LED1
0 1 2 3 4 5 6 7
Drive Support
Each chip supports 4 drives
Support for up to 8 drives by cascading two I2C Signals
MG9070
Promise SATA HBA S S
C D Promise
MG9070 is designed to work L I SATA-HBA
Drive Locate 29
Backplane_ID
MG9070 29 Backplane_ID MG9070
Global Activity 0 1 2 3 0 1 2 3
Global Fail
0 1 2 3 4 5 6 7
Ready LED Support
0 1 2 3 4 5