Académique Documents
Professionnel Documents
Culture Documents
All material allowed by the various Code Sections lieu of the corresponding ASME Specification as listed
and used for construction within the scope of their in this Appendix. Material produced to an ASME or
rules shall be furnished in accordance with the Material ASTM Specification with requirements different from
Specifications contained within Section II and this the requirements of the corresponding Specification may
Appendix except where otherwise provided in Code also be used in accordance with the above, provided
Cases or in the applicable Section of the Code. Materials the material manufacturer or vessel manufacturer certi-
covered by these Specifications are acceptable for use fies with evidence acceptable to the Authorized Inspector
in items covered by the Code Sections only to the that the corresponding Specification requirements have
degree indicated in the applicable Section. Materials been met. This Appendix lists the Specifications and
for Code use should preferably be ordered, produced, acceptable dates of issue as well as the Book sections
and documented on this basis; however, material pro- of the ASME Boiler Code in which the specification
duced under an ASTM Specification may be used in is approved for use.
xli
A99 SB-108 ... ... ... ... ... 96a 87 thru 96a
Identical for the alloys and tempers covered except for the deletion of requirements for governmental and military agencies, the addi-
tion of 17.2, changes in 10.2, and editorial differences. Yield strength test and certification have been made mandatory.
xlii
SB-211 ... ... ... ... ... 95a 88 thru 95a A99
Identical for the alloys and tempers covered except for the deletion of Tables 3, 4, and Annex A2, and editorial differences.
Certification has been made mandatory.
SB-248 - General Requirements for Plate, Sheet, Strip, and Bar 94 87 thru 94
Identical for applicable specifications and alloys covered except for the deletion of Supplementary Requirements for government pro-
curement. Certification has been made mandatory.
SB-249 - General Requirements for Rod, Bar, and Shapes ... 94a 86 thru 94a
Identical for the applicable specifications covered except for the deletion of Supplementary Requirements for government procurement
and editorial differences. Certification has been made mandatory.
xliii
xliv
xlv
xlvi
xlvii
A99 SB-824 - General Requirements for Copper Alloy Castings ... ... 96 93 thru 96
Identical for the applicable specifications except for mandatory certification, the deletion of supplementary requirements for govern-
ment procurement, and some editorial changes.
SB-858M 95 ...
Identical
xlviii