Vous êtes sur la page 1sur 43

Qualcomm Global Services, Inc.

For VIETTEL Only

LTE Capacity Summary

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X
Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X
Qualcomm Global Services, Inc.
5775 Morehouse Drive
San Diego, CA 92121
U.S.A.

2013 Qualcomm Global Services, Inc.


All rights reserved.
For VIETTEL Only

NO PUBLIC DISCLOSURE PERMITTED: Please report postings of this document on public servers or websites to: DocCtrlAgent@qualcomm.com.
Restricted Distribution. Not to be distributed to anyone who is not an employee of either Qualcomm or its subsidiaries without the express approval of Qualcomms Configuration
Management.
Not to be used, copied, reproduced, or modified in whole or in part, nor its contents revealed in any manner to others without the express written permission of Qualcomm Global
Services, Inc.
Qualcomm is a trademark of QUALCOMM Incorporated, registered in the United States and other countries. All QUALCOMM Incorporated trademarks are used with permission. Other
product and brand names may be trademarks or registered trademarks of their respective owners.
This technical data may be subject to U.S. and international export, re-export or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited.

LTE Capacity Channel Capacity Calculation


Summary
80-XXXXX-X Rev. A December 2013

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 2
For VIETTEL Only

LTE Resource
Definitions

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 3
UL/DL Resource and Capacity to be covered
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 4
DL Capacity - Key Resources & Their Impact
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 5
UL Capacity - Key Resources & Their Impact
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 6
LTE Resource Time, Frequency, Space
LTE physical channels need to be defined in terms of:
Time:
For VIETTEL Only

Frame: 10ms in one frame


Sub-frame: 10 sub-frame in a frame, 1ms long in a sub-frame
Slot: there are 2 slot in a sub-frame
Symbol: depending on the CP, extended CP with 6 symbols, normal CP with 7 symbols
Frequency:
Sub-carrier: 15kHz width in frequency
Depending on the system bandwidth, # of sub-carrier can be calculated by the following formula:
90% 1000
# =
15[]

Except to 1.4MHz system, where the # of Sub carrier = 72 instead of 84


Space:
New component in MIMO system, it depend on RF environment
Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 7
LTE Physical Channel Frames & Slots
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 8
LTE Physical Channel Resource Block (RB)
Resource Block:
12 Subcarrier in 1 sub-frame
For VIETTEL Only

Minimum resource allocation for 1 user (in dedicated channel)


Multiple RB could be assigned to one user.

Number of RB

#
# =
12

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 9
LTE Physical Channel Resource Element (RE)
Resource Element (symbol):
1 subcarrier used in 1 symbol time.
1 slot contains 3, 6 or 7 symbol.
For VIETTEL Only

Multiple RB could be assigned to one user.


Some symbols have fixed usage e.g. RS
Symbols can carry physical information e.g. RS,
control or user information.
Control information is always modulated in QPSK
(or BPSK)
User information could be modulated
QPSK (2 bits per symbol)
16QAM (4 bits per symbol)
64QAM (6 bits per symbol)

Number of REs in 1 Frame

# = # # 1 10
Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 10
Resource Grid Definitions for Control Information
Resource Element Group (REG):
Group of 4 or 6 RE to carry control information.
For VIETTEL Only

Only 4 usable REs per REG


REGs with 6 REs may have two RS symbols.
1 = 4

Control Channel Element (CCE):


Group of 9 REGs form a single CCE used for PDCCH
signaling.
1 = 9 = 4 9 = 36
Each CCE could have 36 usable REs.

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 11
Downlink Channelization Hierarchy
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 12
Uplink Channelization Hierarchy
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 13
For VIETTEL Only

LTE DL Resource

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 14
For VIETTEL Only

Traffic-Independent Fixed DL
Channels Resource
RS, PBCH, PSS, SSS, SIB

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 15
Downlink Reference Signal DL-RS
# of RE used by DL-RS is depending on:
System BW
For VIETTEL Only

# of Antenna
For R0 and R1, RS always located in symbol 0 and 3(extend CP) or 4 (normal CP) in each slot.
For R2 and R3, RS always located in symbol 1 only in each slot.
# of RE used by RS in 1 Frame:
# = # of RB (1) 8 10 # of antenna = 1 or 2 # = # of RB 2 12 10 # of antenna = 4

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 16
Physical Broadcast Channel - PBCH
PBCH:
Time: sub-frame 0 in every frame and first 4 OFDM symbols in 2nd
slot of sub-frame.
For VIETTEL Only

Frequency: middle 6RB (1.08MHz)


Number of REs in 1 Frame
# of RE assigned for PBCH overlapped RS signal (4x4 always
assumed)
= 6 12 4 8 = 240

= 6 12 4 12 = 216

Normal CP Extended CP

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 17
Synchronization Signal (PSS & SSS)
PSS and SSS Resource Allocation:
Time: sub-frame 0 and 5 for every frame
For VIETTEL Only

Frequency: middle 6RB (1.08MHz), but only effectively


use 62 sub carriers.
Number of REs in 1 Frame
& = 6 12 2 10 2 2 = 248

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 18
System Information Broadcast - SIB
SIB Resource Allocation depending on:
Periodicity: 80ms to 5120ms
For VIETTEL Only

Size of the SIB: information send over the SIB, 3~20RB.


Number of REs in 1 Frame

10
= 12

SIB1
SIB2
SIB2
SIB6,7
SIB6,7
SIB3,4
SIB3,4
SIB5
SIB5

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 19
For VIETTEL Only

Traffic-dependent DL Control
Channels
PCFICH, PHICH, PDCCH

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 20
DL Control Channel
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 21
Physical Control Format Indicator Channel
- PCFICH
PCFICH carries the Control Format Indicator (CFI)
Transmitted in:
For VIETTEL Only

Time: 1st OFDM symbol in every sub-frame


Frequency: spanning in the entire system band
Fixed resource: 4 REG in each sub-frame
Number of REs in 1 Frame
= 4 4 10 = 160

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 22
Physical HARQ Indicator Channel
- PHICH
PHICH used to transmit ACK/NAK UL Data, where
transmitted in:
Time:
Normal Duration: 1st OFDM symbol
For VIETTEL Only

Extended Duration: over 1, 2 and 3 OFDM symbol CFI = 3


Frequency:
spanning in the entire system band
Associated to start of corresponding PUSCH grant.
The PHICH acknowledgement is identified by:
PHICH Group, Ng = { 1/6, 1/2, 1, 2}
PHICH Orthogonal Sequence Index within the PHICH Group.
Normal CP: 8 orthogonal sequence
Extended CP: 4 orthogonal sequence
The PHICH acknowledgement is modulated using BPSK to
generate 3 modulation symbols.
1.4MHz 3MHz 5MHz 10MHz 15MHz 20MHz
The Modulation symbols are then spread using PHICH PHICH Group Scaling Factor Ng Normal Cyclic Prefix
orthogonal sequence. #RB 6 18 25 50 75 100
Normal CP: SF4 is used 0.166666667 1 1 1 2 2 3
0.5 1 2 2 4 5 7
Expend CP: SF2 is used 1 1 3 4 7 10 13
This results in PHICH acknowledgements occupying: 2 2 5 7 13 19 25
Normal CP: 3x4= 12 RE, PHICH Group Scaling Factor Ng Extended Cyclic Prefix
#RB 6 18 25 50 75 100
Extended CP: 3x2 = 6 RE 0.166666667 2 2 2 4 4 6
# 0.5 2 4 4 8 10 14
= ( ) 4 3 10 1
Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
2 6
80-XXXXX-X Rev. X
8 14 20 23
26
8 2 4 10 14 26 38 50
Physical Downlink Control Channel
- PDCCH
PDCCH used to:
DL/UL resource assignment
For VIETTEL Only

TCP command
Paging indicator
CCE are the building block of PDCCH
Time: 1 to 4 OFDM symbol per sub-frame
Frequency: 1CCE = 9 REG = 36 RE = 72bits (QPSK modulated)
CCE aggregation of 1, 2, 4 or 8 which is depending on RF quality
and among of information need to be transmitted.
Number of REs in 1 Frame
CFI = 1, Available RB in symbol 1 - #PHICH symbol - #PCFICH
symbol - #RS symbol
CFI = 2 PDCCH symbol (CFI=1) + Available RB in symbol 2
CFI = 3 PDCCH symbol (CFI=1) + PDCCH symbol (CFI=2) +
available RB in symbol 3

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 24
For VIETTEL Only

Paging Channel
Capacity

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 25
Physical Paging Channel
- PCCH
Paging message could be sent by:
MME: initial MT PS DATA, SMS, MT CSFB
eNode: re-acquired system information
For VIETTEL Only

ETWS (Earthquake and Tsunami Warning System) SIB10, 11


CMAS (Commercial Mobile Alert Service) SIB12
nB defines which frames and sub-frames can be used for a
PO (paging occasion)
PO only in sub-frame {9, [4,9} or [0,4,5,9]}
Actual paging message is transmitted over PDSCH
Paging size is depending on # of multiplexed user in one paging
message, e.g. 2 to 6 RB
Up to 16 paging record allowed within 1 paging message.
nB could be configured as:
4T, 2T, T/2, T/4, T/8, T/16, T/32
Number of REs in 1 Frame
= 12 1

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 26
For VIETTEL Only

Traffic Dependent
Channel
PDSCH

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 27
Physical Downlink Share Channel
PDSCH
PDSCH
In the time-frequency grip, PDSCH channel occupy all
the RE not used for other purpose.
For VIETTEL Only

To estimate number of RE available for PDSCH


in 1ms, need to discount RE used for
Reference Signal (RS)
Control Symbols (PCFICH, PHICH, PDCCH)
BCCH (PBCH & SIBs)
PCCH
Synchronization (PSS & SSS)
Idle resource (not assigned for any use).

P =
Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 28
Idle Resource Element in DL
Some of the resource element has been wasted where the RE has not been assigned for
any use.
For VIETTEL Only

The idle REs are located in:


The beginning and the end of PSS and SSS RB.
5x2x2+5x2x2 = 40 REs
The reserved RS 4x4 MIMO in PBCH resource grid.
Normal CP 1Tx 6x6 = 36, 2Tx 6x4 24
Extended CP 1Tx 6x8 = 48, 2Tx 6x4 24

Normal CP Extended CP

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 29
For VIETTEL Only

LTE UL Resrouce

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 30
For VIETTEL Only

Traffic Independent Fixed


Channel
SRS, RS

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 31
Sounding Reference Signals
- SRS
SRS provides UL channel quality estimations at different
frequencies. The information is used by the UL scheduler for
channel dependent scheduling at eNode B.
For VIETTEL Only

SRS is transmitted on the last symbols of the sub-frame.


Depending on:
Size of SRS (4 or higher)
SRS periodicity (2ms to 160ms)
Number of REs in 1 Frame

10
= 12
[]

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 32
Demodulation Reference Signal
- DM-RS
DM-RS for coherent demodulation of UL
transmission for the UE
For VIETTEL Only

OFDM symbol 2 (extend CP) or 3 (normal CP) is


reserved for RS.
Number of REs in 1 Frame

= ( ) 12 2
Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 33
For VIETTEL Only

Traffic Dependent
Control Channel
PRACH, PUCCH

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 34
PRACH Format
Cyclic Prefix Sequence Guard Time Max Cell
Preamble
Application Duration Delay Spread Cell Range Duration Duration Total Length Cell Range Range
Format
[s] [s] [km] [s] [s] [ms] [km] [km]
For VIETTEL Only

0 FDD & TDD 103.13 5.2 14.7 800 96.88 1 14.5 14.5
1 FDD & TDD 684.38 16.67 100.2 800 515.63 2 77.3 77.3
2 FDD & TDD 203.13 5.2 29.7 1600 196.88 2 29.5 29.5
3 FDD & TDD 684.38 16.67 100.2 1600 715.63 3 107.3 100.2
4 TDD only 14.85 0 2.2 133 9.38 0.16 1.4 1.4

15kHz

6 RB 1.08MHz
1.05MHz
Guard
Cyclic Prefix Sequence
Period

15kHz

1 sub frame 1 sub frame

Preamble formats 0 to 3 use subcarrier spacing of 1.25kHz spacing instead of 15kHz.


This Preamble formats use 839 subcarriers to occupy 1.05MHz in frequency domain.
There are 15kHz guard band either side of the random access preamble, given total 1.08MHz or 6RB.

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 35
Physical Random Access Channel
- PRACH
PRACH used to perform initial system access
and achieve UL synchronization
For VIETTEL Only

Cannot carry any UL data or signaling. It is


purely a random sequence.
Each random access preamble occupies a BW
corresponding to 6 consecutive RB.

10 = 6
Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 36
Physical Random Access Channel
- PRACH
64 random access sequence number available for RACH access procedure. Thus the max
number of RACH attempts = 64 x number of sub-frame dedicated for RACH.
For VIETTEL Only

Config Premable Subframe # of Subframes Dedicated Max # of RACH Config Premable Subframe # of Subframes Dedicated Max # of RACH
SFN SFN
Index Format Number for RACH in 10ms attempts in 10ms Index Format Number for RACH in 10ms attempts in 10ms
0 0 Even 1 0.5 32 32 2 Even 1 0.5 32
1 0 Even 4 0.5 32 33 2 Even 4 0.5 32
2 0 Even 7 0.5 32 34 2 Even 7 0.5 32
3 0 Any 1 1 64 35 2 Any 1 1 64
4 0 Any 4 1 64 36 2 Any 4 1 64
5 0 Any 7 1 64 37 2 Any 7 1 64
6 0 Any 1,6 2 128 38 2 Any 1,6 2 128
7 0 Any 2,7 2 128 39 2 Any 2,7 2 128
8 0 Any 3,8 2 128 40 2 Any 3,8 2 128
9 0 Any 1,4,7 3 192 41 2 Any 1,4,7 3 192
10 0 Any 2,5,8 3 192 42 2 Any 2,5,8 3 192
11 0 Any 3,6,9 3 192 43 2 Any 3,6,9 3 192
12 0 Any 0,2,4,6,8 5 320 44 2 Any 0,2,4,6,8 5 320
13 0 Any 1,3,5,7,9 5 320 45 2 Any 1,3,5,7,9 5 320
14 0 Any 0 to 9 10 640 46
15 0 Even 9 0.5 32 47 2 Even 9 0.5 32
16 1 Even 1 0.5 32 48 3 Even 1 0.5 32
17 1 Even 4 0.5 32 49 3 Even 4 0.5 32
18 1 Even 7 0.5 32 50 3 Even 7 0.5 32
19 1 Any 1 1 64 51 3 Any 1 1 64
20 1 Any 4 1 64 52 3 Any 4 1 64
21 1 Any 7 1 64 53 3 Any 7 1 64
22 1 Any 1,6 2 128 54 3 Any 1,6 2 128
23 1 Any 2,7 2 128 55 3 Any 2,7 2 128
24 1 Any 3,8 2 128 56 3 Any 3,8 2 128
25 1 Any 1,4,7 3 192 57 3 Any 1,4,7 3 192
26 1 Any 2,5,8 3 192 58 3 Any 2,5,8 3 192
27 1 Any 3,6,9 3 192 59 3 Any 3,6,9 3 192
28 1 Any 0,2,4,6,8 5 320 60
29 1 Any 1,3,5,7,9 5 320 61
30 62
31 1 Even 9 0.5 32 63 3 Even 9 0.5 32

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 37
Physical Uplink Control Channel
- PUCCH
PUCCH carries Uplink Control Information (UCI)
May include CQI/PMI, HARQ ACK/NAK to DL-SCH and RI
Common channel for all UEs when not transmitting on PUSCH
For VIETTEL Only

Channelization through orthogonal sequence.


= 12,18 36 1
= 12 2

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 38
Physical Uplink Control Channel
- PUCCH
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 39
Physical Uplink Control Channel
- PUCCH
For VIETTEL Only

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 40
Physical Uplink Control Channel
- PUCCH

The number of UE for SR (Format1/1a/1b) in giving reporting period:


For VIETTEL Only

# = 36 SR Periodicity

The number of UE for CQI (Format2/2a/2b) in giving reporting period:

# = 12 _ CQI Periodicity

The number RB reserved for PUCCH Ack/NAK:



# =
36

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 41
For VIETTEL Only

Data Traffic
Channel PUSCH

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 42
Physical Uplink Shared Channel
- PUSCH
PUSCH may carry:
UL data
For VIETTEL Only

ACK/NAK for DL data


CQI/PMI/RI
Number of REs in 1 Frame

= 12 10

Confidential and Proprietary Qualcomm Global Services, Inc. | MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION 80-XXXXX-X Rev. X 43

Vous aimerez peut-être aussi