Académique Documents
Professionnel Documents
Culture Documents
Fields of application:
For use in indoor and outdoor areas, on bare iron and steel surfaces.
Properties:
Protects from corrosion without additional overpainting
High degree of stability, very good coverage properties
Variable spray head
High layer thickness in first spray pass
Spot weldable
Application:
The application surface must be clean, dry and free from grease. Remove rust and old loose paint,
sand, and clean
Shake the can well for about two minutes before use
Spraying distance: 1520 cm
Spray passes: 12 spray passes at 24 m per spray pass
o Variator minimum position: 1 cm
o Variator medium position: 6 cm
o Variator maximum position: 15 cm
Maintain flash-off times of approx. five minutes between the spray passes (for a dry film layer
thickness of 70 m and 20C)
Notes:
The heat resistance depends heavily on the type and duration of heat exposure and is a maximum of 400C;
changes in colour tone due to heat exposure cannot be ruled out at this temperature.
This advice is based on our own research and experience. It We recommend the users of our products to perform
is presented in good faith and may be considered reliable. their own tests in order to determine whether our
However, due to the diverse processing, application and products are appropriate for the respective use and
handling possibilities the information provided may not be environment. We guarantee the consistent quality of
considered legally binding. The same applies to the
our products. We reserve the right to implement
information provided by our technical and commercial
technical changes and improvements.
customer service.