Académique Documents
Professionnel Documents
Culture Documents
0 JUN 2014
Author: SW Boon
DC 12V 1A
Copyright reserved
www.dcmoto.my MOTORIZED LOCK FOR AUTOMATIC GATE
Fold type
motor B motor A
Swing type
motor B motor A
gap
Fold type:
For L = 3.2m ~ 4m, gap > 9mm
For L > 4m, gap > 7mm
110 cm
Ground
Rev. 2.0 JUN 2014
Author: SW Boon
www.dcmoto.my MOTORIZED LOCK FOR AUTOMATIC GATE Copyright reserved
DC 12V 1A
motor A
to control panel
(@ motor A)
INSTALLATION INSTRUCTIONS:
1: install the hook first 2: make a mark as a position guide for installing the base plate
1 fasten with
6 screws 2
2.5cm
Hook
110cm
make a make a
mark here 110cm mark here
Ground
Ground
3: align the hole (base plate) to the mark 4: install the base plate after aligned to the mark 5: slide in the main unit
arrange the
electrical wire
into the hole
drill a hole for
electrical wiring
6: fasten the main unit to the base 7: add a stack if it is for swing type gate 8: installation completed
6 7 8
turn with key turn with key
clockwise clockwise
to release the to release the
lock lock