Académique Documents
Professionnel Documents
Culture Documents
00-SNAPSHOT 01/06/14
Chassis ID Path
A 252575 2129/Repair//Core plug, replace
Model Identity
FH16 124367595
Drill an 8 mm hole (A) in the plug approx. 8 mm from the centre of the plug. Use drilling paste so that metal chips do
not get into the cooling channels.
2
Insert a screwdriver or similar tool into the hole and prise out the plug. Clean the plug seat carefully.
3
Fit the new plug using sealant and tap it into place with a drift and hammer. The surface of the plug is to be flush with
the surrounding surface. Use sealant LOCLITE 572.
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
1/1