Académique Documents
Professionnel Documents
Culture Documents
SDS-Max Shank
Rotary Hammer
Electronic Control HR5211C/ HR5210C/ HR5201C 52mm (2")
The constant speed control keeps minimizing the
speed loss under loaded conditions and enables
highly efficient operation.
Comparison of Efficiency
Note: 1. It may differ under some conditions.
2. Numbers in the charts below are relative values
when the capacities of Competitor "B" are indexed at 100.
1 Drilling
Test conditions:
Drilled in concrete with compressive strength of 40N/mm2 .
Bit diameter: 25mm
Makita HR5211C 125
Competitor "D" 115
Competitor "H" 85
Competitor "B" 100
0 80 100 120 140
slow fast
Competitor "H"
Competitor "B"
0
60
slow
100
80
110
52mm
Test conditions:
Chipped concrete with compressive strength of 40N/mm2.
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN Z15214-2 2007-05
Name Plate Slide Chuck
Learned from
Learned from
:: Located on
low damage risk area
:: Push-in and Go
:: Slide-back and Pull
How to manage VIBRATION Piston Air Piston No Hammering Mode Change Lever
How to bring you COMFORT while Idling :: Located on
Sleeve
Striker
:: Ensures machine's long life low damage risk area
Striker
:: Protected by
robust aluminum top
Principle of
Dynamic Vibration Absorber Reinforcing bar
Torque Limiter 85
mm
Long Barrel Portion
:: When drill bit hits against :: can be securely held by hand
reinforcements,
Torque Limiter operates
to stop
MAKITA's Balancer
Hammering
(HR5211C and HR5210C) Air
Air
Spring
Vibration Absorbing Grip
(HR5211C only)
Spring loaded
hinged grip absorbs vibration
Tool does not Hammering
come with bit with Rotation