Académique Documents
Professionnel Documents
Culture Documents
Ballot Text
This ballot is to address use of connections for any wall thickness that is
intermediate to the wall thickness for each OD size identified in Tables
C.1/E.1.
The addition of footnote e is proposed for change in API 5CT 9th Edition as
shown below in red font.
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to
become an API Standard. It shall not be reproduced or circulated or quoted, in whole or in part, outside of API committee activities except with
the approval of the Chairman of the committee having jurisdiction and staff of the API Standards Dept. Copyright API. All rights reserved.
NOTE The table for "ISO/API plain-end casing liner list Grade J55" has been deleted.
a Labels are for information and assistance in ordering.
b Nominal linear masses (col. 4) are shown for information only.
c The densities of martensitic chromium steels (L80 Types 9Cr and 13Cr) are different from carbon steels. The masses shown are therefore not
accurate for martensitic chromium steels. A mass correction factor of 0.989 may be used.
d Buttress casing is available with regular, special clearance couplings or special clearance couplings with special bevel.
e
For casing with S, L and B connections, intermediate wall thicknesses are allowed in accordance with 8.2.
This document is not an API Standard; it is under consideration within an API technical committee but has not received all approvals required to
become an API Standard. It shall not be reproduced or circulated or quoted, in whole or in part, outside of API committee activities except with
the approval of the Chairman of the committee having jurisdiction and staff of the API Standards Dept. Copyright API. All rights reserved.