Académique Documents
Professionnel Documents
Culture Documents
F Range XSF250G
Floodlight
XEF140P
XSF250P
56
Z.I. - Avenue Henri Beaudelet B.P. 27 - 77831 Ozoir Cedex - France - Tel. +33 (0)1 64 40 27 26 - Fax +33 (0)1 64 40 20 11
Zone 1
+ zone 2
Technical specifications
EEx “d”
Enclosure Cable entries Flameproof
Marine grade aluminium alloy type AS7G06Y33 Standard: One nickel chromed brass M20 entry with
Cataphoretically treated - yellow polyester paint RAL 1003 fixing flange for non-armoured cable, Ø 8.5-16mm
12mm toughened glass One M20 nickel chromed brass plug
Ingress rating: IP66 (EN60529), silicone gasket Option: M20-M25 metallic cable gland for armoured cable
Stainless steel screws series PEP (see page 113)
Temperature Terminal block
Ambient temperature range: -20°C to +55°C (see table) Up to 6mm2 (rigid wire), 4mm2 (flexible wire)
Surface temperature classification:T5 to T1 Terminals supplied for L, N, PE
depending on floodlight power (see table) Photometric
Lamps installed (see table)
data
Protection class: I Polished aluminium reflector 110 110
100 100
Rated voltages (optional end plate)
Standard: wide beam
Version HPS/metal halide: Option: narrow beam
Standard: 230V 50Hz ferromagnetic ballast, with capacitor Option: horizontal louver HF001 4
Halogen version 2x55/70W: Standard: galvanised steel flat mounting bracket, yellow
Standard: 12V (55W); 24V (70W) - direct connecting polyester paint RAL1003
Options: please enquire Options: stainless steel flat mounting bracket 304L
With metal halide lamp
‘U’ shaped bracket (specially reinforced for drilling) for 1000 Lm
Power Factor in galvanised steel, yellow polyester paint RAL1003
0.85 for version with compensated ballast Pole mounted, Ø 40 to 60mm (in the references: 100
110 110
100
(Sodium HP and metal halide) replace letter ‘P’ with letter ‘G’
Eg: XSF400P becomes XSF400G)
Adjustable with foot (SA103)
Safety support cable (SC100) 5
R=
Installation and maintenance instruction leaflet NT 13 available on request
30 30
Reference Rating Lamps Nominal Version Weight Temperature class With sodium lamp H.P.
(in W) current (in Kg) Temp= -20°C to +40°C Temp= -20°C to +55°C For 1000 Lm
(in A) 100
110 110
100
XSF150P 70 E27 tubular 0.4 HP Sodium 17 T4 T3
XSF150P 150 E40 tubular 0.8 HP Sodium 17 T4 T3
XSF250P 250 E40 tubular 1.3 HP Sodium 18 T3 T3
XSF400P 400 E40 tubular 2.1 HP Sodium 20 T3 T2
XQF250P 250 E40 tubular 1.3 Metal halide 18 T3 T3 N
2X
XQF400P 400 E40 tubular 2.1 Metal halide 20 T3 T2 24
P001 Closing screw P010 Ballast 120V (400W) P023 Box cover
P002 Sealed front glass P012 Starter P025 Cover screw
P004 Gasket P015 Safety support cable P026 Cable gland
P006 Lamp* P017 Mounting bracket P030 Ex through wiring connector
P007 Lampholder E40 P018 Support screw E006 Optic
P008 Reflector P019 Terminal block 2 x 6 E007 70W iodine lamp
Cross mounting P009 Ballast 230/240V P021 Earthing terminal E008 Gear tray support
(150, 250, 400W)* P022 Box gasket E009 Attachment for optic
57