Académique Documents
Professionnel Documents
Culture Documents
C Mn Si P S Cr Mo Ni Cu Fe
0.020 2.00 1.00 0.045 0.035 19.0 4.0 23.0
1.0- 2.0 Balance
max. max. max. max. max. 23.0 5.0 28.0
Stainless Steel 904L, UNS N08904, WNR 1.4539 Stainless Steel Pipes,
Tube Mechanical Properties
904L
Density 8
Melting Range, 1300-1390
Elongation % 35 min.
Tensile Strength (Mpa) 490
Yield Strngth (Mpa) 220
Hardness (Brinell) 150
STANDARDS 904L
UNS N08904
8.05 g/cm3
DENSITY
1350 C (2460 F)
MELTING POINT
35 %
ELONGATION
ALLOY 904L
23 28
NI
45
MO
19 23
CR
12
CU
0.02 max
C
2.0 max
MN
1.0 max
SI
0.045 max
P
0.035 max
S
904L pipe is made from high alloy austenitic stainless steel that is known for its corrosion
properties. 904L Stainless Steel Pipe is a non-stabilized low carbon high alloy austenitic
stainless steel. The addition of copper to this grade gives it greatly improved resistance to
strong reducing acids, particularly sulphuric acid. AISI 904L Pipe is also highly resistant to
chloride attack both pitting / crevice corrosion and stress corrosion cracking.
904L Pipe is non-magnetic in all conditions and has excellent weld ability and formability. The
austenitic structure also gives this grade excellent toughness, even down to cryogenic
temperatures. Alloy 904L Pipe does have very substantial contents of the high cost ingredients
nickel and molybdenum. Many of the applications in which this Stainless Steel 904L Pipe has
previously performed well can now be fulfilled at lower cost by duplex stainless steel 2205
(S31803 or S32205), so 904L is used less commonly than in the past.
SP METAL
Address : Shop no. 14,Ground Floor, Near by Alankar Theater,KhetwadiI Back Road,Mumbai-4
Hours: Monday Saturday, 10:00 19:00