Académique Documents
Professionnel Documents
Culture Documents
Affected Documents
Product Document Number: Description: Old Rev: New Rev:
DV164035 14-00888 PRODUCT TREE, MPLAB ICD 3 IN-CIRCUIT DEBUGGER 1 2
12-00888 FINAL ASSY, MPLAB ICD 3 IN-CIRCUIT DEBUGGER 1 2
08-00225 LABEL, SERIAL NUMBER BAR CODE 1 2
08-00224 LABEL, PART NUMBER BAR CODE 1 2
Reason for Change:
Changing clamshell for one that is made for the ICD 3.
Updating Serial and Product Labels to Rev 2
Description of Change:
[12-00888]
Changing 09-00176 to 09-00229
08-00225 and 08-00224 updating to Rev 2.
Material Disposition:
CM: Implement as soon as new clamshells available.
12/5/2008 12/5/2008
Revs were updated Packlist is correct
Description of change was implemented All necessary drawings are in PDF file
Page 1 of 1
Microchip Technology Incorporated
Q.C. Inspection
2355 W. Chandler Blvd.
Chandler, AZ 85224-6199
Date:
ASSEMBLY NUMBER: 14-00888 REV: 2 LAST ECO: 4940 Part No: DV164035
ASSEMBLY NAME: PRODUCT TREE, MPLAB ICD 3 IN-CIRCUIT DEBUGGER MPCode: Product Tree
Part Number Rev Type Description
12-00888 2 BQ FINAL ASSY, MPLAB ICD 3 IN-CIRCUIT DEBUGGER
11-00261 C BQ ASSY, MPLAB ICD 3 MODULE W/ CABLE & SELF-TEST MODULE
10-00421 C B ASSY, MPLAB ICD 3 MODULE
10-00421-D A D ASSY DWG, MPLAB ICD 3 MODULE
02-02009 D B PCB ASSY, MPLAB ICD 3
02-02009-D C1 D PCB ASSY DWG, MPLAB ICD 3
03-02009 C1 D SCHEMATIC, MPLAB ICD 3
04-02009 C2 D PCB FABRICATION, MPLAB ICD 3
05-02009 C DISK PCB ARTWORK, MPLAB ICD 3
08-00323 1 LBL LABEL, SERIAL NUMBER BOARD LABEL BARCODE
08-00126 6 LBL LABEL, NEED HELP WITH ASSY/SERIAL
08-00236 4 LBL LABEL, USB WARNING LABEL (DS51756)
07-00024 2 B CABLE ASSY, 6 CONDUCTOR MODULAR CABLE, 6"
07-00024-D 2 D CABLE ASSY DWG, 6 CONDUCTOR MODULAR CABLE, 6"
02-02026 3 B PCB ASSY, ICD 3, SELF-TEST MODULE
02-02026-D 3 D PCB ASSY DWG, ICD 3, SELF-TEST MODULE
03-02026 3 D SCHEMATIC, ICD 3, SELF-TEST MODULE
04-02026 3 D PCB FABRICATION, ICD 3, SELF-TEST MODULE
05-02026 3 DISK PCB ARTWORK, ICD 3, SELF-TEST MODULE
08-00411 1 LBL LABEL, ICD 3 SELF TEST MODULE FIRMWARE
10-00420 1 B ASSY, MPLAB ICD 3 LITERATURE/SOFTWARE PACKAGE
08-00225 2 LBL LABEL, SERIAL NUMBER BAR CODE
08-00224 2 LBL LABEL, PART NUMBER BAR CODE
13-00888 * TEST TEST PROCEDURE, MPLAB ICD 3 IN-CIRCUIT DEBUGGER
* Revision of the Test Procedures are controlled in the Specification Index Page 1 of 1
Microchip Technology Incorporated KEY
11-00261 ASSY, MPLAB ICD 3 MODULE W/ CABLE & SELF-TEST MODULE Rev: C
Qty Part Number Description
1 02-02026 PCB ASSY, ICD 3, SELF-TEST MODULE
1 07-00024 CABLE ASSY, 6 CONDUCTOR MODULAR CABLE, 6"
1 10-00421 ASSY, MPLAB ICD 3 MODULE
Page 1 of 1
4 3 2 1
D D
C 2 C
Typ:2places
Pin1 Pin6
B B
Notes:
A A
Overallcablelength:6.00
Cableisreverseconnect(P1-P6)
Title
UNLESSOTHERWISESPECIFIED 6CONDUCTORMODULARCABLE
DIMENSIONSAREININCHES.
TOLERANCESARE: Size Number Rev
Fractions Decimals Angles
A 07-00024 2
.XX 0.02 1DEG Date 12/22/2005 DrawnBy R Griffith
.XXX 0.005 Filename 07-00024R2.cdr
Sheet 1 of 1
4 3 2 1
M
DS51756A
4 3 2 1
D
1.750" D
200%
Before attaching this device to a USB
C C
port, follow instructions for installing
the MPLAB IDE USB driver.
100%
B
Notes: B
Font: Arial
Label Material
Material: White Vinyl
Finish: Clear Overlaminate
Adhesive: Permanent
Overall Dimensions 1.75" x 0.5" w/0.075" R corners
Color Specification:
Black Microchip T echnology Inc.
A 2355 W. Chandler B lvd. A
M
Need Help?
http://support.microchip.com
Assy# 10-00157-R2 Serial # JIT971217076
Label Information
Label Size: 0.5 x 2.0
Text Size
Need Help? (8pt, Bold)
Assembly Number, Serial Number, Revision: (7pt)
Graphics
Microchip Logo provided as a true type font. (~24pt)
Label Data
Need Help? (10pt, Bold, Centered)
http://support.microchip.com (7.5pt, centered)
Assy# (7-9pt, Left)
Serial# (7-9pt, Right)
Part Number
Part Number of the assembly that calls out the label
Revision
R1 - Revision of the assembly that calls out the label
Serial Number:
JIT- Manufacturer ID
95 - Year (95....)
28 - Work week product shipped (01-52)
1 Lot number (0-9)
0001 - Sequence Piece Number (0001 - 9999) Starts over with each new lot number.
Location
The 08-00126 label is to be located on the assembly that calls out the label.
Label Definition ICD 3 SELF-TEST MODULE FIRMWARE VERSION
08-00411 Rev 1
v1.0
Label Information
Label Size: 15mm x 12mm
Label Color: White
Label Text
Font: any
Font Size: any (~ 6 point)
Label Data
v1.0
Graphics
Not required
Barcode
Not required
Serialization
Not required
Location
Label to be located on topside of the J2 connector.
Board Level Barcode
08-00323 Rev 1
J IT984810001
JIT062510001
Label Information
Approx. Label Size: 1.5" x 0.37"
Barcode Information
Barcode is Code 39 format (3 of 9)
Barcode Height is approx. 0.15
Ratio is 2.5:1 (Deviations need to be approved by Microchip)
Density is 5.29 cpi (Deviations need to be approved by Microchip)
Text is Times New Roman (Deviations need to be approved by Microchip)
Serial Number:
JIT- Manufacturer ID
06 - Year (06....)
28 - Work week product shipped (01-52)
1 RoHS Compliance/Lot number, if unit is RoHS compliant 9, if not indicates lot #(1-8).
0001 - Sequence Piece Number (0001 - 9999) Starts over with each new lot number.
Location
This label is attached to the open area found on the topside of the 02-xxxxx assembly. It will be
attached either before or, at electrical testing and be used by the test personnel to program the
internal serial EEPROM found on the assembly.
Vendor to insure that the serial number data corresponds to the serial number label placed on the
plastic assembly and on the outer packaging.
Product Label, Product Name, Part Number, w/ barcode
08-00224 Rev 2
Label Information
Label Size: 2" x 0.5" (Customize to fit packaging)
Product Name and Part Number are provided in the header area of the 14-xxxxx final assembly BOM for the product that
this label will be attached to.
Barcode Information
Barcode is Code 39 format (3 of 9)
Barcode Height is 0.150
Ratio is 2.5:1
Density is 5.29 cpi
Font: Arial (or other Sans Serif Font)
Serial Number:
None
Graphics
No Graphics
Location
This label is attached to the outside of the product case.
Vendor to insure that the serial number corresponds to the serial number assigned to the main electro-mechanical
assembly contained in this product case.
Serial Label, Country of Origin, w/ barcode
08-00225 Rev 2
||||||||||||||||||||||||||||||||||||||||||||||||||||||| ||||||||
(1T) JIT082810008 US
Label Information
Label Size: 2" x 0.5" (Customize to fit packaging)
Barcode Information
Barcode is Code 39 format (3 of 9)
Barcode Height is 0.150
Ratio is 2.5:1
Density is 5.29 cpi
Font: Arial (or other Sans Serif Font)
Serial Number:
JIT- Manufacturer ID
0828 - Date Code: Last two digits of year and two digits of work week shipped (01-52) (underlined)
1 - Lot number (1-9)
0001 - Sequence Piece Number (0001 - 9999) Starts over with each new lot number.
Location
This label is attached to the outside of the cardboard product case.
Vendor to insure that the serial number corresponds to the serial number assigned to the main electro-mechanical
assembly contained in this product case.