Académique Documents
Professionnel Documents
Culture Documents
Chemicals &
Waterproofing
Edition 3
Welcome to the latest edition of our
Construction Accessories Catalogue
Offering you a vast range of top quality, leading
brand, Construction Accessories and supported by our
nationwide branch network.
Were part of the SIG group, which has recently linked
together its Insulation, Technical Insulation, Fixings,
Interiors and Construction Accessories businesses,
meaning that you can now source a huge range
of products, all from your local SIG Construction
Accessories branch, which means a true One Stop
Shop for specialists.
At SIG Construction Accessories we pride ourselves on
the service we offer to customers. You can trust us to
provide a friendly, professional service and fast,
responsive deliveries, locally or nationally. Our dedicated
team are available with expert product and application
support, including our specialist teams: Waterproofing,
Masonry Components, Concrete Repair Centre and
Geotechnical Centre, ensuring you get the right products
for the right job, on time and within budget.
WATERPROOFING
The Concrete We have a full range of Waterproofing products featuring the
Repair Centre offers major brands within our national network of branches.
specialist support
with expert product Our Technical Business
advice and guidance Development team
from one point of can assist you with the
contact and access correct specification
to the full range to ensure all your
of your preferred requirements are fully
brands, nationwide. watertight.
MASONRY COMPONENTS
Our Masonry components teams can offer technical advice for Providing the complete geotechnical solution, SIG Geotechnical
various design systems including a project management, Centre go beyond system design and product supply. With a
take off and design service. We have mobile technical sales department to hand, providing free
vast experience in supplying a on-site support and advice, our dedicated
comprehensive range of products in-house team are trained to
from Wall Ties and Brickwork offer the most cost
Reinforcement to Masonry Support effective and high
and Windpost Systems, we can performance systems,
offer advice on the best solution combined with the option for
for your building requirements. free PI cover on eligible designs.
Version 3.1
Contents 3
WATERPROOFING 146-215
ACCESSORIES, 232-246
TOOLS & SAFETY
CONVERSION CHARTS 247-249
& TABLES
44 Concrete Repair&&Protection
Concrete Repair Protection
Ardex
Ardex A 45 - Internal Repair Mortar
Ardex Ardurapid A 45 is ideal for the rapid
repair of internal concrete, screeds, renders
and concrete steps, it can also be used to
form ramps, fill cracks and make good around
fittings and pipework. Ardex Ardurapid A 45
receives finishes after 90 minutes regardless of
thickness and is slump free, making it ideal for
vertical and horizontal repairs.
Size: 11kg
6 Concrete Repair & Protection
Ardex PSRS
A two-component epoxy resin designed for
strengthening and restoring poorly compacted
and low strength cement/sand screeds. Ensure
Ardex PSRS is always keyed with Ardex Fine
Aggregate.
Size: 10kg two component tin
Ardex K 301
A fast setting cost effective solution for
smoothing rough or damaged concrete or
cement/sand screeds and is suitable for
internal and external applications prior to tiling.
ARDEX K 301 is walkable after 2-3 hours and
can be tiled onto after 24 hours. Use to level
uneven surfaces, such as paths and patios.
Size: 25kg
Ardex A 35
Used in place of Portland Cement in cement/
sand screeds, Ardex A 35 produces a floor
screed that can be walked on after 3 hours
and is dry enough to receive tiling after 24
hours regardless of thickness. After 1 day the
compressive and tensile strengths of an Ardex
A 35 screed exceed the acceptable minimum
attained by a conventional screed after 28 days.
Size: 25kg
Concrete Repair & Protection 7
Ardex A 35 Mix
A blend incorporating ARDEX A35 cement
and graded sands, for the production of rapid
setting and ultra rapid drying floor screeds,
and for large repairs to existing cement/sand
screeds.
After only one day, the compressive and tensile
bending strength of an ARDEX A 35 Mix screed/
repair exceeds the acceptable minimum
attained by an ordinary cement screed after 28
days, and is also dry, irrespective of thickness.
Size: 25kg
8 Concrete Repair & Protection
BASF
Emaco T545
Emaco T545 is a specially formulated repair
mortar, based on magnesia-phosphate cement
pre-mixed with selected aggregates, which
gives controlled, extremely high early strengths
in temperatures ranging from -20C (or lower)
up to over 30C, making it particularly useful in
cold store applications.
It provides a repair material for concrete
slabs which reaches an adequate strength for
trafficking, or other use, at a very early age. It is
also suitable for use as a repair medium at low
ambient temperatures. Used for thicknesses
above 20mm only, for depths of 30mm and
above up to 10kg of 10mm single sized coarse
aggregate may be added.
Size: 20kg
Emaco Nanocrete R2
Universal, fast setting, polymer modified, fibre
reinforced repair and levelling mortar Emaco
Nanocrete R2 is a universal, single component,
polymer modified, fast setting, repair, reprofiling
and levelling mortar.
Emaco Nanocrete R2 is a ready-to-use
material that contains special cements, well
graded sands, carefully selected polymers and
fibres to reduce shrinkage and improve physical
and application properties.
When mixed with water, it forms a mortar
with an exceptional wide range of applications.
Emaco Nanocrete R2 can easily be hand and
trowel applied in thicknesses from 3 up to
100mm.
Size: 20kg
Concrete Repair & Protection 9
Emaco Nanocrete R3
Lightweight, polymer modified, fibre reinforced,
structural repair mortar Emaco Nanocrete R3
is a single component, lightweight, polymer
modified, high build structural repair mortar.
Emaco Nanocrete R3 is a ready-to-use
material that contains Portland cement, well
graded sands, specially selected polymer fibres
and additives.
Applied nanotechnology has been used to
significantly reduce shrinkage.
Emaco Nanocrete R3 has been specifically
formulated to produce a mortar with
the compressive strength and modulus
characteristics defined in class R3 of EN1504
part 3.
When mixed with water, it forms a highly
thixotropic mortar that can easily be hand,
trowel or spray applied in thicknesses up to
75mm in one layer. It is particularly suited
to vertical and overhead work where hand-
profiling is required.
Size: 20kg
Emaco Nanocrete R4
Extra high-strength, shrinkage compensated,
fibre reinforced, structural repair mortar
Emaco Nanocrete R4 is a single component,
extra high-strength, high modulus, shrinkage
compensated structural repair mortar that
meets the requirements of the new European
Norm EN1504 part 3 class R4.
Emaco Nanocrete R4 is a ready -to-use
material that contains Portland cement, well
graded sands, specially selected polymer fibres
and special additives to significantly reduce the
risk and incidence of shrinkage cracking.
When mixed with water, it forms a highly
thixotropic mortar that can easily be spray or
trowel applied.
Size: 20kg
10 Concrete Repair & Protection
Emaco Nanocrete AP
Single component, cement based, multi-use,
bonding and active protective primer Emaco
Nanocrete AP active primer, not only reinstates
a high pH environment it also contains active
corrosion inhibiting additives for the protection
of reinforcement steel. It can also be used as an
adhesive bonding slurry for subsequent repair
mortars.
Emaco Nanocrete AP is a ready-to-use
material that contains portland cement, well
graded fine fillers, redispersible powder and
special additives.
When mixed with water, it forms a slurry that can be
applied by brush to the clean exposed reinforcement,
or directly on the dampened, prepared concrete
substrate when used as a bonding coat.
Size: 5 Litres, 15 Litres
BASF
Type Size Coverage
Emaco T545 20kg
Emaco Nanocrete R2 20kg 20kg - 1.3 m2@10mm thick
Emaco Nanocrete R3 20kg 20kg - 1.4 m2@10mm thick
Emaco Nanocrete R4 20kg 2kg - per m2/per mm thick
Convergent
Pentra-Sil (NL) HD+C
A water-based, clear, dissipating membrane- Size: 25 Litres, 200 Litres
forming curing compound, hardener and
densifier that surpasses ASTM C-309 Liquid
Membrane Forming Compounds for Curing
Concrete moisture retention requirements.
This single component application forms a
tougher, abrasion resistant surface compared to
traditional methods requiring post-densification
(28 days later). Excellent for commercial and
industrial concrete floors that need long-term
protection against heavy wear and abuse,
moisture, dirt and grime buildup. This earth
friendly / bio based compound contains no
solvents and has a VOC content<100g/L.
Concrete Repair & Protection 11
Everbuild
Febset 45
Febset 45 is a specifically formulated repair
mortar, based on magnesia-phosphate cement
pre-mixed with selected aggregates, which
gives controlled, extremely high early strengths
in temperature ranging from -20C (or lower)
up to over 30C. Febset 45 can be modified
with 10mm aggregate for use in depths over
150mm. It is also suitable for use as a repair
medium at low ambient temperatures.
Size: 25kg
SBR
Bonding and waterproofing admixture to add to
screeds, renders and repair mortar mixes.
Size: 5 Litres, 25 Litres
Everbuild
Type Size Coverage
Febset 45 25kg 11.6 litres
SBR 5 litres, 1.2L - 1m2@12mm thick
25 litres
12 Concrete Repair & Protection
Flexcrete
Steel Reinforcement Protector 841
Economic, polymer cement coating to
passivate and protect steel reinforcement.
Supplied with a convenient mixing kit. BBA
certified and CE Marked in compliance with
EN1504-7.
Size: 5kg
Monolite
Low density, high yield, shrinkage compensated,
polymer modified cosmetic repair mortar for
concrete, brick or stone. Single component
cementitious formulation, no primer required,
simply mixed with water and easily applied in
single layers up to 100mm. Particularly suitable
for vertical and overhead use. CE Marked Class
R2 to EN1504-3.
Size: 20kg
Monomix
Medium density, multi-purpose structural grade
polymer modified mortar based on Portland
cement and benefitting from shrinkage
compensation and fibre reinforcement. No
primer required other than saturation of
substrate. Simply mix with water and apply by
hand or trowel to achieve 80mm build even
overhead. Special spray grade available. Totally
waterproof under a 100m hydrostatic head and
has DWI Reg 31 approval. BBA Certified and CE
Marked Class R3 to EN1504-3.
Size: 25kg
Concrete Repair & Protection 13
Monomix HD
Heavy duty, high strength polymer modified
mortar which is suited for durable structural
repairs as well as heavily trafficked areas. No
primer required, simply mix with water. High
build, up to 80mm in a single layer even when
used overhead. Compliant with Highways
Agency Standard BD27/86, and CE Marked
Class R4 to EN1504-3.
Size: 25kg
Fastfill
Ultra high strength, rapid curing, single
component, polymer modified, Portland
cement based mortar giving fast return to
service. Shrinkage compensated and fibre
reinforced for use in heavy wear applications
including industrial floors, runways, roadways
and footpaths as well as areas subject to early
immersion. No primer required, simply mix
with water. Used from 5mm or up to 300mm
when bulked out with aggregate for filling
of large voids or for bedding applications.
DWI Reg 31 Approved for use in contact with
drinking water, compliant with Highways
Agency Standard BD27/86, BBA certified and CE
Marked Class R4 to EN1504-3.
Size: 25kg
Monolevel
Single component, polymer modified mortars
for rendering and reprofiling of in-situ and pre-
cast concrete and brickwork to produce a high
quality, decorative engineering finish. Mixed
with water on-site and applied by spray, trowel
or bag rubbing techniques. Uses include fairing
coats to fill minor voids and defects on new
and existing structures (Monolevel FC Class R2
EN1504-3), waterproofing of basements and
water tanks including drinking water structures
(Monolevel 844SP Class R4 to EN1504-3) and
waterproof external rendering of brick and
blockwork (Monolevel RM).
Size: 25kg
14 Concrete Repair & Protection
Cementitous Coating 851
Twin component, polymer modified
cementitious coating which produces a
flexible, highly alkaline film for waterproofing
and protecting new and existing structures.
It is particularly effective at reinstating
concrete cover - 2mm is equal to 100mm of
concrete cover. It is fully waterproof against
positive and negative pressure, proven under
a 100 metre hydrostatic head and protects
concrete from the ingress of carbon dioxide
and chloride ions (including de-icing salts).
It has excellent freeze thaw resistance and
can also be used on brickwork and blockwork.
Spray or brush applied, uses include potable
water containment (DWI Reg 31 Approved),
basement waterproofing and chloride
protection for marine and highway structures.
BBA certified and CE Marked in compliance
with EN1504-2.
Other EN1504-2 certified cementitious coatings
include Cemprotec Elastic for cracked concrete,
Cemprotec E-Floor for high performance deck
protection and Cemprotec E942 in areas where
enhanced chemical resistance is required.
Size: 30kg
Concrete Repair & Protection 15
Monodex Range
Technically advanced, low VOC, weatherproof
anti-carbonation coatings which are
independently tested to confirm equivalent
protection to an extra 500mm of concrete
cover. Applied over Bond-Prime in two coats,
Monodex Ultra has a 10 year design life with
Monodex Smooth extending to 15 years.
Available in an attractive range of colours to
produce a durable, decorative finish which is
equally suited for repaired structures or in new
construction.
Flexcrete
Type Size Yield Coverage
Repair Mortars
Steel Reinforcement Protector 841 5kg 2.8 litres 45 linear metres of 10mm bar
Monolite 20kg 18.5 litres 1.85m2 @ 10mm thickness
Monomix 25kg 16.5 litres 1.65m2 @ 10mm thickness
Monomix HD 25kg 13.1 litres 1.31m2 @ 10mm thickness
Fastfill 25kg 13.3 litres 1.33m2 @ 10mm thickness
Fairing Coats and Renders
Monolevel FC 25kg 15 litres 5m2 @ 3mm thickness
Monolevel 844SP 25kg 15 litres 5m2@ 3mm thickness
Monolevel RM 25kg 14 litres 1.4m2 @ 10mm thickness
Waterproofing Cementitious Coatings
Cementitious Coating 851 30kg 16.67 litres 8.33m2/30kg @ 2mm thickness
Cemprotec Elastic 30kg 18.8 litres 9.4m2 @ 2mm thickness
Cemprotec E-942 30kg 16.2 litres 8.1m2 @ 2mm thickness
Waterproofing Floors
Cemprotec E-Floor 30kg 16.2 litres 8.1m2 @ 2mm thickness
Cemprotec E-Floor HB 30kg 15 litres 5m2 @ 3mm thickness
Cemprotec EF Primer 5, 25 litres 5, 25 litres 3-10m2 per litre
Surface Pre-treatments
Bond Prime 5, 25 litres 5, 25 litres 5m2 per litre
Anti-Carbonation Coatings
Monodex Ultra 15L 15 litres 37.5m2 per pack
Monodex Smooth 15L 15 litres 37.5m2 per pack
All single component Flexcrete mortars require only the addition of clean water. Packs can be split on site for
mixing by volume for economic use.
16 Concrete Repair & Protection
Fosroc
Fosroc offers a comprehensive range of concrete repair products. The
range includes cementitious repair mortars, epoxy mortars, coatings and
crack injection systems. From small patch repairs to complete concrete
rehabilitation, Fosroc has the solution to suit any job.
Renderoc
Cementitious Repair Mortars
Fosrocs cementitious repair systems include the world-renowned
Renderoc mortars. These are pre-bagged, single component products
available in various grades depending on the application.
Renderoc GP
General purpose concrete reinstatement mortar
which can also be used as a render as well
as all types of patch repairs. It can be applied
up to 20mm thick in overhead and 30mm
in vertical sections. In horizontal applications
100mm thickness can be obtained.
Size: 25kg
Renderoc HB
Single component lightweight fibre and
polymer modified concrete reinstatement
mortar for high build applications. Renderoc
HB can be applied up to 80mm thick in vertical
and 50mm in overhead work without the use
of formwork. Thicker sections can be achieved
by use of formwork or built up in layers.
Thickness range 10mm-50mm.
Size: 18kg
Renderoc S
Structural grade polymer modified concrete
reinstatement mortar. Used for repairs of
large areas of concrete and for localised patch
repairs. The application range is 5-10mm in
vertical and 5-100mm in horizontal situations.
Size: 25kg
Concrete Repair & Protection 17
Renderoc LA
Single component free-flowing low alkali micro-
concrete. The product is highly fluid and obviates
the need for compaction and vibration where
access is restricted or reinforcement congested.
Renderoc LA is ideal for the reinstatement of
large structural sections of concrete.
Size: 25kg
Renderoc LA55
Low alkali, high performance micro-concrete for
the reinstatement of large, structural sections
of concrete. Renderoc LA55 is BBA accredited,
cert no. 98/3461.
Size: 25kg
Renderoc DS
Polymer modified dry spray repair mortar. DS is
designed for large area repairs such as bridges,
tunnels, retaining walls, dams etc. Complies
with DTp specification series 1700.
Size: 25kg
Renderoc HB30
Renderoc HB30 has been specifically
engineered for vertical and overhead repair
work. It can be applied in sections up to 60mm
thickness in vertical locations and up to 40mm
thickness in overhead locations in a single
application and without the use of formwork.
Thicker sections can be achieved by the use
of formwork or can be built up in layers. Deep
pockets can sometimes be filled in a single
application dependent on the configuration
of the pocket and the volume of exposed
reinforcing steel. High performance fibre
reinforced lightweight concrete reinstatement
mortar conforming to the requirements of
BS EN1504-3 Class R3.
Size: 22kg
18 Concrete Repair & Protection
Renderoc HB45
High performance fibre reinforced medium
weight concrete reinstatement mortar. For the
reinstatement of reinforced concrete where
low permeability characteristics are required
and where higher compressive strength is
a consideration. Renderoc HB45 has been
specifically developed for the repair of columns
and beams, but because of its medium fresh
wet density, is also suitable for soffit repairs.
Size: 25kg
Renderoc RP252
Cementitious mortar for re-profiling concrete
structures. It can be used either to produce a
fair-faced finish in preparation for a protective
coating (see Dekguard range) or as a protective
mortar layer. Renderoc RP252 can also be used
to render large sections of concrete. Renderoc
RP252 is BBA accredited, cert no. 98/3461.
Size: 3.4 litre & 20kg bag
Renderoc FC
Cementitious fairing coat for filling blowholes
prior to coating. It is designed for vertical and
overhead use to infill honeycombing and voids
up to 3mm deep in the surface of concrete.
Renderoc FC must be overcoated. Renderoc FC
is BBA accreditied, cert no. 98/3461.
Size: 25kg
Renderoc MB50
For the reinstatement of reinforced concrete where low permeability characteristics are required
and where high compressive strength is an important consideration. Renderoc MB50 has been
engineered for the repair of columns and beams but, because of its medium fresh wet density,
is also suitable for soffits and other overhead repair work. The mortar can also be used for small,
localised patch repairs.
Size: 25kg
Concrete Repair & Protection 19
Renderoc
Type Size Coverage (Approx)
Renderoc GP 25kg bag 1.6m2 @ 10mm thickness
Renderoc HB 18kg bag 1.5m2 @ 10mm thickness
Renderoc S 25kg bag 1.2m2 @ 10mm thickness
Renderoc LA 25kg bag 12 litres/25kg bag
Renderoc LA55 25kg bag 12 litres/25kg bag
Renderoc DS 25kg bag 2m2 @ 10mm thickness
Renderoc HB30 22kg bag 1.5m2 @ 10mm thickness
Renderoc HB45 25kg bag 1.4m2 @ 10mm thickness
Renderoc RP252 Kit 3.4 litre liquid + 20kg bag 2.4m2 @ 5mm thickness
Renderoc FC 25kg bag 5m2 @ 3mm thickness
Renderoc MB50 25kg bag 1.4m2 @ 10mm thickness
Renderoc Primer 4kg Part A, 1 litre Part B 2.5 litres - 5m2
20kg Part A, 5 litre Part B 13 litres - 26m2
Nitocote EP403
Nitocote EP403 is a damp-tolerant protective
coating for concrete and mild steel. The cured
film is corrosion, chemical and abrasion
resistant and is suitable for application
to sewage works, marine environments,
basements and tunnels. It is particularly useful
where concrete surfaces are damp and cannot
be dried out.
Size: 2.5kg
Nitocote EP405
Nitocote EP405 is a solvent-free epoxy resin
coating used for lining and waterproofing
potable water retaining structures and surfaces
subject to contact with foodstuffs. The cured
film is corrosion, chemical and abrasion
resistant and is suitable for application to
tanks, silos, reservoirs, water treatment
works, breweries, dairies and meat and food
processing plants. Nitocote EP 405 is a WRAS
approved product. Available in two colours, blue
and white.
Size: 2.5kg
20 Concrete Repair & Protection
Nitocote EN901
Nitocote EN901 is a solvent-free epoxy resin coating with high chemical resistance. It is used
to protect to concrete and steel structures in aggressive chemical immersion conditions. The
material is particularly suitable for applications in process plants and sewage works.
Size: 4 Litres
Nitocote SN502
Nitocote SN502 is a high performance
silane-siloxane treatment for concrete and
masonry. It is used to protect concrete
structures from attack by chloride ions and
water. SN502 is suitable for all types of
structures, including those in coastal areas.
Size: 25 Litres, 200 Litres
Nitocote SN511
Nitocote SN511 is a high performance water repellent treatment specifically used for protecting
reinforced concrete roads and bridges. SN511 is DTp specified and protects concrete from water
and chloride ingress whilst still allowing it to breathe.
Size: 25 Litres
Fosroc Nitocote
Type Size Coverage
Nitocote EP403 2.5kg packs (1.5 litres) 3m2 per kg per coat (5m2 per litre)
Nitocote EP405 2.5kg packs (1.5 litres) 3m2 per kg per coat (5m2 per litre)
Nitocote EN901 4 litres 10m2
Nitocote SN502 25, 200 litres 5m2 per litre per coat
Concrete Repair & Protection 21
Galvafroid
Galvafroid is an anti-rust coating for iron and
steel. It is cold-applied by brush or roller and is
used for the protection of structural steelwork,
agricultural and construction plant, gates,
railings, iron pipework and in-situ weldings.
Galvafroid is grey in colour and can be used as
a self-finish or as a durable anti-rust coating
beneath selected top coats.
Type Size Coverage
Galvafroid 400ml, 800ml, 1.9 litre 16m2/litre when used as a primer
8m2/litre when used as a self-finish
Paveroc
Reinstatement Mortar for large area repairs
of concrete pavements and floors to avoid
the total replacement of bays. Can be used
internally or externally in thicknesses between
12mm and 100mm in a single application.
Primer for Paveroc is Nitobond EP.
Type Size Coverage
Paveroc 25kg 0.9m2 @ 12mm
thickness
Patchroc GP
Emergency fast setting repair mortar for
concrete pavements and floors can accept
traffic in 2hrs. For use at depths from 12mm
to 100mm in a single application and a
maximum bay size of 4m2. Needs priming
with Nitobond AR for pedestrian traffic, and
Nitobond EP for vehicular traffic.
Type Size Coverage
Patchroc GP 25kg 1m2 @ 12mm
thickness
Nitobond AR 1, 5, 25 litre 6.8m2 per litre
22 Concrete Repair & Protection
Nitomortar Resin Repair Mortars
Fosroc has a range of epoxy and polyester reinstatement mortars for jobs
where high strength is required quickly. These include:
Nitomortar HB
Lightweight chemical resistant epoxy mortar for
vertical and overhead applications, thickness
range 10mm-50mm.
Size: 2.9kg, 9.3kg
Nitomortar S
High strength, chemical resistant epoxy mortar,
ideal for industrial floors, tanks and sea walls,
thickness range 5mm-50mm.
Size: 5kg, 16kg
Nitomortar FC
Epoxy fairing coat for filling blowholes and surface preparation. Chemical resistant.
Size: 1kg
Nitoprime 25
Suitable for priming concrete surfaces prior
to the application of any of the Nitoflor
SL2000/4000, TS / TF range of resin based floor
toppings, Nitocote range of protective coatings
or Nitomortar range of epoxy repair mortars.
Sizes: 1 Litre, 4 Litres
Fosroc Nitomortar
Type Size Coverage
Nitomortar HB 2.9, 9.3kg 2.5, 8 litres
Nitomortar S 5, 16kg 2.5, 8 litres
Nitomortar FC 1kg 0.6 litres
Nitomortar PE 14kg 7.5 litres
Nitomortar PE Concrete 11kg 15 to 27.5 litres
24 Concrete Repair & Protection
Nitokit Crack Injection
Fosroc supplies crack injection systems for minor concrete repairs, ideal for
in-situ or precast concrete. These are available as pre-packaged kits for fast
and easy application or as standalone injection grouts for bespoke repair.
Nitokit LV/TH
Pre-packaged, thixotropic epoxy crack injection
resin, suitable for open-ended cracks where
depth and quantity needs to be controlled.
The Nitokit systems are ideal for small scale
repairs on and are also suitable for the insitu or
precast concrete elements.
Nitokit LV/TH Accessory pack
Contents Contents
12 cartridges - 0.25 litre of mixed resin 1 injection gun
30 injection nipples 1 plastic bucket
6 hoses 10 pairs disposable gloves
4 air release pins 2 pairs goggles
6 mixing rods* 1 x 5 .5 litre pack Nitokit Surface Sealant
Nitofil LV
Low viscosity epoxy resin injection grout for
cracks between 0.25mm and 9mm where both
sides of the crack can be sealed against resin
drainage.
Size: 3 Litres
Nitofil TH
Thixotropic epoxy resin injection grout for
cracks between 0.5mm and 9mm where both
sides of the crack cannot be completely sealed.
Size: 1 Litre
26 Concrete Repair & Protection
Fosroc Primers and Bonding Agents
Nitobond AR
Curing membrane for Renderoc system and
primer for Renderoc S and Patchroc GP.
Size: 5 Litres, 25 Litres
Nitobond HAR
Concrete bonding agent, used as primer for
Renderoc HB, HB25, HB40 and GP.
Size: 5 Litres, 25 Litres
Nitobond SBR
Additive for improving mortars for
waterproofing repairs. Also used as a bonding
agent for slip bricks, ceramic tiles etc.
Size: 5 Litres, 25 Litres, 210 Litres
Nitobond EP Standard
Used for bonding old to new concrete. Also
primer for Patchroc / Paveroc and Renderoc
cementitious systems.
Size: 2.5kg, 4.5kg
Concrete Repair & Protection 27
Fosroc Primers and Bonding Agents
Type Size Coverage
Nitobond AR 5, 25 litre drums 4-6m2/litre*
Nitobond HAR 5, 25 litre drums 4-6m2/litre*
Nitobond SBR 5, 25, 210 litre drums
Nitobond EP Standard 2.5, 4.5kg packs 5m2, 10m2
Nitoprime Zincrich Plus 800ml, 1.9 litre 7.4m2 per litre
Fosroc Coatings
Fosrocs durable and attractive
coatings are designed to perform
in harsh environments and are
chemical, abrasion and carbonation
resistant.
Dekguard W
Dekguard W water-based coloured coating
protects exposed reinforced concrete structures,
cementitious substrates and masonry from
aggressive elements, weathering and rain. It
is suitable for use on all types of structures,
including those in coastal environments.
Available in a wide range of colours. Dekguard
W is BBA accredited, cert no. 98/3461.
Size: 10 Litres
28 Concrete Repair & Protection
Dekguard S
Dekguard S is a high performance coating for exposed concrete and masonry that provides
outstanding resistance to aggressive elements, UV light and rain. Available in a wide range of
colours. Dekguard S is BBA accredited, cert no. 98/3461.
Size: 10 Litres
Dekguard Elastic
Dekguard Elastic is a water-based coloured
elastomeric coating for exposed concrete
and masonry. It provides excellent elongation
and recovery, low dirt pickup, resistance
to aggressive elements, UV light and rain.
Available in a wide range of colours. Dekguard
Elastic is BBA accredited, cert no. 98/3461.
Size: 10 Litres
Dekguard Textured
Dekguard Textured is a textured weather-resistant coating for exposed concrete and masonry. It
provides low dirt pick-up, resistance to aggressive elements, UV light and rain. Available in a wide
range of colours.
Size: 10 Litres
Dekguard E2000
Crack-accommodating elastomeric protective coating for reinforced concrete structures.
To protect atmospherically exposed reinforced concrete structures from attack by acid gases,
chloride ions, oxygen and water, especially where there is a danger of subsequent cracks
appearing within the substrate. Dekguard E2000 is suitable for use on all types of structures,
including those in coastal environments.
The Dekguard E2000 system comprises a single component penetrating primer and a single
component elastomeric pigmented coating, both ready for immediate site use.
Size: 10 Litres
Dekguard Primer
A reactive silane-siloxane treatment for use with Dekguard products.
Size: 25 Litres
Concrete Repair & Protection 29
Nitoprime DG
Primer specifically for use with Dekguard Elastic.
Size: 25 Litres
Fosroc Coatings
Type Size Coverage
Dekguard W 10 litres 2.75m2/litre
Dekguard S 10 litres 3m2/litre
Dekguard Elastic 10 litres 1.25m2/litre
Dekguard Textured 10 litres 2m2/litre
Dekguard E2000 10 litres 2.5m2/litre
Dekguard Primer 25 litres 2.5m2/litre
Lisochem
LisoTop OWR Anti Graffiti Coating
TM
30 Concrete Repair & Protection
LisoTop C Surface Protection
TM
Lisoclean E
A solution to remove efflorescence, Lisoclean
E Efflorescence easily removes all residue of
saltpetre and allows the surface to be protected
by one of the Lisotop products. Lisoclean E
Efflorescence is a high performance treatment
created to clean and restore the natural aspect
of masonry.
Solvent Free.
Concrete Repair & Protection 31
Ronacrete
RonaBond Concrete Cover 150
RonaBond Concrete Cover 150 is an
enhancement barrier and coating system for
concrete. Two coats creates an equivalent
concrete thickness of 150mm to protect
reinforcing steel and extend the life of
reinforced concrete.
Size: 19kg
RonaBond HB25
RonaBond HB25 is a pre-packed mortar used
for repairing concrete on vertical and overhead
surfaces where ease of application is as
important as high strength. It can be applied in
relatively thick section to walls and soffits and
depending on the nature of the repair, in layers
up to 75mm deep in pocket repairs. RonaBond
Lightweight Repair Mortar is supplied pre-
packed requiring only the addition of water.
Size: 18kg
Ronacrete
Type Size Coverage
RonaBond Concrete Cover 150 19kg 7.6kg per m for 2 coats
RonaBond pre-packed concrete repair mortar 25kg Yield - 90 packs per m
RonaBond HB40 13 litres 1m@13mm
RonaBond Lightweight Repair Mortar 18kg 1m@15.5mm
RonaBond Concrete Repair Mortar 25kg 1m@11mm
RonaBond Easy Skim FC 25kg 6.5m@2mm
Ronacrete Standard Primer 2kg, 10kg 2kg 3-4m per coat/10kg 15-20m per coat
Type Size Coverage
Ronafix Pre-packed Bedding Mortar 25kg -
Ronacrete Standard Primer 2, 10kg 2kg 3-4m2 per coat/10kg 15-20m2 per coat
34 Concrete Repair & Protection
RonaRoad Manhole Mortar
A zero VOC pre-packed ready to use mortar. It
achieves a compressive strength in excess of
the Highways Authority Specification just 1
hour after mixing can be applied at low and
sub-zero temperatures down to 10C.
Bedding mortar for manhole frames and
brickwork
Open to traffic in 1 hour
Performs below freezing and down to 10C
Compressive Strength @ 1 hour 30N/mm
Compressive Strength @ 24 hours 48N/mm
Compressive Strength @ 28 days 70N/mm
Working time 10 minutes Initial set 13
minutes
Density 2,400kg per m
Size: 25kg
RonaRoad Manhole Concrete
A zero VOC pre-packed ready to use concrete.
It achieves a compressive strength in excess
of the Highways Authority Specification just 2
hours after mixing, can be mixed and applied
at low and sub-zero temperatures down to
10C.
Bedding and haunching concrete for
manholes
Open to traffic after only 2 hours
Suitable for rapid raising and bedding of
manhole covers and ironwork
Compressive Strength @ 2 hours 23N/mm
Compressive Strength @ 7 days 53N/mm
Compressive Strength @ 28 days 57N/mm
Working time 10 minutes Initial set 13
minutes
Density 2,400kg per m
Size: 25kg
Concrete Repair & Protection 35
36 Concrete Repair & Protection
Ronafix Mix Design
Application Mix Thickness/notes
Floor screeds and screed repairs A 6mm - 50mm
Floor screeds and screed repairs A1 26mm+
Floor toppings and topping repairs B 15mm - 25mm
Floor toppings and topping repairs B1 26mm+
Floating floor screeds F 35mm+
Concrete repair D over reinforcing steel
Concrete repair A no reinforcing steel
Renders E watertight and tanking
Renders A waterproof
Bedding brick slips, copings C 6mm - 12mm typical
Fine concretes G 25mm+ typical
Mix Designs Cement Medium 6-3mm 10-5mm 10-5mm Ronafix Water Yield m3 Coverage
sharp granite pea granite (approx) (approx) (approx)
sand chips shingle chips
A By weight 50kg 125kg - - - 9 litres 9 litres 0.1 10m2 @ 10mm
By volume 1 2 - - - 1:1 with water - - -
A1 By weight 50kg 150kg - - - 4.5 litres 14 litres 0.1 10m2 @ 10mm
By volume 1 2.5 - - - 1:3 with water - - -
B By weight 50kg 75kg 75kg - - 9 litres 9 litres 0.1 10m2 @ 10mm
By volume 1 1.25 1.25 - - 1:1 with water - - -
B1 By weight 50kg 75kg - - 75kg 4.5 litres 14 litres 0.1 7m2 @ 15mm
By volume 1 1.25 - - 1.25 1:3 with water - - -
C, D & E By weight 50 kg 125kg - - - 14 litres 4 litres 0.1 10m2 @ 10mm
By volume 1 2 - - - 3:1 with water - - -
F By weight 50kg 150kg - - - 4.5 litres 13.5 litres 0.1 10m2 @ 10mm
By volume 1 2.5 - - - 1:3 with water - - -
G By weight 50kg 100kg - 100kg - 4.5 litres 14 litres 0.14 5.6m2 @ 2.5mm
By volume 1 1.5 - 1.5 - 1:3 with water - - -
Slurry coat By weight 50kg 50kg - - - 35 litres - 0.1 105 - 122m2
By volume 1 1 - - - - - - -
Concrete Repair & Protection 37
Sika
Sika MonoTop 610
A single-component polymer modified
cementitious bonding bridge and steel
reinforcement primer.
Size: 25kg
38 Concrete Repair & Protection
Sika MonoTop 620
A one-component cementitious polymer
modified mortar, thickness range 1.5mm-5mm.
Size: 25kg
Sika MonoTop
Type Size Coverage
Sika Monotop 610 25kg 1.5 - 2kg/m2/coat
Sika Monotop 612 25kg 2.11kg/m2/mm
Sika Monotop 615 25kg 1.65kg/m2/mm
Type Size Coverage
SikaGard 62
Sikagard 62 is a two-component solvent free,
high-build coloured epoxy resin coating with
high chemical resistance and approved for use
in contact with potable (drinking) water.
Size: 5kg
SikaGard 63N
A solvent free, two-part epoxy resin coating
ideal for bund areas.
Size: 10kg
SikaGard
Type Size Coverage
SikaGard 62 5kg Approximately 0.2 - 0.4kg/m2
SikaGard 63N 10kg 0.3 - 1kg/m2 per coat, dependent on substrate condition and required
coating thickness
40 Concrete Repair & Protection
Sika Adhesives
Sikadur 31
Two-part epoxy thixotropic adhesive for
bonding building materials. Fast setting and
non-shrinking. For sticking brick slips, bedding
tiles, wood etc. NWC/NRC certified for contact
with potable water. Normal grade (N): for
5-30C application, Rapid grade (R): for 0-15C
application.
Size 1.2kg, 6kg
Sikadur 31 GB Rapid
Sikadur 31 GB Rapid is a solvent-free, moisture
tolerant, thixotropic, structural two-part
adhesive and repair mortar, based on epoxy
resins and special sillers, designed for use at
temperatures between +5C and +20C.
Size: 1.2kg, 6kg
Sikadur 32
Two-pack solvent free liquid epoxy bonding agent in 1 and 5 kilo packs. For bonding similar and
dissimilar materials, e.g. concrete, metal, stone, glass, wood and asbestos.
Size: 5kg
Concrete Repair & Protection 41
Sikadur 33
Sikadur 33 is a two-component epoxy resin
adhesive in a cartridge to fit normal skeleton
gun.
Size: 250ml
Sika Adhesives
Type Size Coverage
Sikadur 31 Normal Grade 1.2kg, 6kg 1.65kg/m2/mm
Sikadur 31 GB Rapid 1.2kg, 6kg 1.65kg/m2/mm
Sikadur 32 5kg 0.7kg/m2 @ 0.5mm thickness
Sikadur 33 250ml
Sikatop 121
Pre-packed ready for use. Adhesive mortar, two-part cementpolymer base used for cosmetic
repairs i.e. blow holes and also as a bonding bridge.
Size: 10kg, 25kg
SikaTop
Type Size Coverage
Sikatop Armatec 110 20kg 2kg/m2/coat
Sikatop 121 10, 25kg 2kg/m2 per mm thickness
42 Concrete Repair & Protection
Sika Epoxy Mortars and Crack Repair
Sikadur 41CF
Trowel applied epoxy patching mortar in
concrete grey colour. For heavy duty repairs
in damaged and defective areas in concrete,
mortar, screeds, bridge bearings, etc.
Size: 10kg
Sikadur 52
Very low viscosity crack injection non-shrink, solvent-free epoxy, for repair by pouring or injection
into cracks in concrete, also for stabilising lifted screeds. Colour: clear.
Size: 1kg
Sika Epoxy Mortars and Crack Repair
Type Size Coverage
Sikadur 41CF Normal Grade 10kg 2kg/m2 per mm thickness
Sika Coatings
Sikagard 550 W Elastic
A one-part, elastomeric coating based on UV-curing acrylic dispersion with excellent crack-
bridging properties even at temperatures below 0C.
Size: 15 Litres
Concrete Repair & Protection 43
Sikagard 700 S
A one-part water repellent impregnation for absorbent cementitious substrates. It penetrates well
into the open pores of the substrate, providing a durable water repellency, while still allowing
water vapour diffusion in both directions.
Size: 20 Litres
Type Size Coverage
Sikagard 550 W Elastic 15 litres 0.25 - 0.35kg/m2 per coat
Sikagard ElastoColor 675 W 15 litres 0.2 - 0.25kg/m2 per coat
Sikagard 680 S Clear Glaze 20 litres 0.15kg/m2
Sikagard 680 S Cosmetic 30 litres 0.2kg/m2
44 Concrete Repair & Protection
Sika Admixtures
Wintermix
A winter working admixture for concrete. Coverage/usage Approx: 125litres/25kg cement
Sizes: 5 Litres, 25 Litres
Accelerator
Chloride free Sika Accelerator cold weather and rapid hardening admixture for mortars and
concretes. Coverage/usage Approx: 1.5litres/25kg cement
Sizes: 5 Litres, 25 Litres
Weber
The weber.cem concrete repair system is a pre-bagged, multi-component
system based on polymer-modified Portland Cement mortars and
coatings based on acrylic resins.
weber.cem Bondcoat
A single-component polymer-modified,
cementitious bonding aid. It requires only the
addition of clean water to produce a bonding
slurry for weber.cem HB30, weber.cem HB40
and weber.cem lightweight mortars.
This product has been formulated to comply
with the requirements of BS EN1504-3 for a
bonding primer.
Size: 20kg
weber.cem Mortar
weber.cem mortar is a general purpose mortar
for the repair of concrete, to both horizontal
and vertical surfaces. Also available with
cathodic protection.
Size: 25kg
Concrete Repair & Protection 45
weber.cem Lightweight
A polymer-modified cementitious mortar mix,
with specially selected lightweight fillers. It is
pre-blended, contains a polymer powder and
simply requires the addition of clean water to
produce a mortar suitable for both soffit and
vertical repairs in situations where high-build
replacement with conventional concrete is
impractical. High-build up to 75mm in soffit
patch repairs, without formwork.
Size: 20kg
weber.cem HB30 and HB40
Single-component, polymer-modified high
build mortars for replacing defective concrete
with 30N/mm2 and 40N/mm2 compressive
strength, thickness range up to 100mm
vertically and 75mm on soffits.
Size: 20kg
46 Concrete Repair & Protection
weber.cem Spray DS
A ready-to-use, polymer-modified, cement-
based concrete mix. It contains inert limestone
aggregates and dust suppressants. The
formulation has been designed specially for
dry process spray application to give high
early strength, reduced rebound and maximise
application thickness.
Size: 25kg
weber.cem Pyrapatch
Is a pre-packed product based on hydraulic
cements with specially graded non-reactive
aggregates. The product is polymer-modified
which when mixed with clean water produces a
fast setting repair concrete, suitable for patch or
full depth repairs up to 2m2.
Size: 25kg
Concrete Repair & Protection 47
weber.cem Pyratop
A rapid-strength gain repair concrete for
thin bond pavement repairs, which is a
pre-packed hydraulic cement-based product
with specially graded aggregates. It exhibits
high early strength, is dimensionally stable and
has excellent abrasion resistance.
Size: 25kg
weber.cem Pyrabed
A cementitious product containing a blend of
special cements and graded aggregates, which
when mixed with water produce fast-setting
bedding mortars for the rapid installation of
ironwork and highway furniture. They can
be applied to depth of 10100mm in one
pass and the rapid strength development
characteristics allow the road to be opened to
traffic 60 minutes after placement, dependent
on the grade of product selected.
Size: 25kg
Five Star Repair Concrete
A pre-blended cementitious repair concrete
which fully complies with the Highways
Agency Specification for Highway Works and
Department of Transport specification BD
27/86 for a high strength flowing concrete. Also
available with cathodic protection.
Size: 25kg
48 Concrete Repair & Protection
weber.tec EP Structural Adhesive
A two-component, bisphenol epoxy resin and
polyamine hardener, highly moisture-tolerant
structural adhesive for structural jointing and
structural strengthening. Used for application
thicknesses of 210mm. Conforms with
BS EN1504-4.
Size: 5kg
weber.cem Brushcoat
Is a two-component, SBR Latex-modified,
flexible cementitious coating for brush, spray
or roller application. It is formulated as a
protective, levelling coating to cover non-
structural surface defects in new and old
concrete.
Size: 20kg (15kg bag powder, 5 litre bottle of
SBR latex)
Type Size Coverage
weber.cem brushcoat 20kg plastic bucket; 15kg bag of powder A + B prduces a yield of 10.8 litres,
(Component A) sufficient to cover 10m2 per 1mm coat
Weber
Type Size Coverage/Yield
weber.cem Bondcoat 20kg 16.5 litres per 20kg bag
weber.cem Mortar 25kg 1m2 @ 12mm thick - 12 litres
weber.cem Lightweight 20kg 1m2 @ 16mm thick - 16 litres
weber.cem HB30 and HB40 20kg 16 litres per 20kg bag or 6.5m2 per bag at
2mm thickness
weber.cem Fairing Coat 25kg 13 litres per 25kg or 6.5m2 per bag at 2m
thickness
weber.cem Spray DS 25kg approximately 11.5 litres per 25kg bag,
allowance must be made for rebound and
profiling
weber.tec Bedding Mortar 25kg 12 litres per 25kg pack
weber.cem Pyrapatch 25kg approximately 12 litres
weber.cem Pyratop 25kg approximately 12 litres
weber.cem Pyrabed 25kg 12.75 litres per 25kg bag
Five Star Repair Concrete 25kg 12.75 litres
weber.tec EP Structural Adhesive 5 kg 2.9 litres coverage -
weber.cem Brushcoat 20kg Bucket, 15kg Bag plus 10.8 litres per 20kg
5 litre bottle
weber.tec EP bonding aid 5.6kg 1.2m2 - 2.5m2/kg
50 Concrete Repair & Protection
weber.tec EP Mortar
A three-component bulk pack or as a two
component handy pack, consisting of epoxy
resin, hardener and selected graded aggregates
(filler) which when mixed produce a high
strength, impermeable and chemically
resistant mortar.
Size: 26kg
weber.tec Mortar
A three-component bulk pack or as a
two-component handy pack, consisting of
polyester resin, hardener and selected graded
aggregates (filler) which when mixed produce
a high strength, impermeable and chemically
resistant mortar.
Size: 25kg
Weber Resin Repair Mortars
Type Size/Contents Coverage
weber.tec EP Mortar 26kg approx 12.5 litres
Concrete Repair & Protection 51
weber.cote coatings
Single-component, acrylic anti-carbonation coatings for the long term
protection of existing concrete and new repairs. Available in clear,
pigmented smooth, flexible and elastomeric versions. weber.cote
coatings are applied by brush, roller or airless spray in two coats.
If stabilisation of the concrete is required prior to application, the
surface should be treated using weber.cote primer (was sealercoat).
The coverage of weber.cote coatings will vary depending on the type of
substrate and the surface porosity. The following is a guide for brush or
roller application two coats on to smooth surfaces.
weber.cote smooth
External decorative anti-carbonation coating in
a smooth finish.
Size: 15 Litres
52 Concrete Repair & Protection
weber.cote EC
Elastomeric flexible anti-carbonation coating
for concrete.
Size: 15 Litres
weber.cote primer
Stabilises and seals substrate prior to
the application of Weber.cote smooth or
Elastomeric.
Size: 5 Litres
weber.tec Guard MCI 20 litres 0.25 litre/m2
weber.cote smooth 15 litres 3 - 6m2/litre in 2 coats
weber.cote EC 15 litres 1 - 2m2/litre in 2 coats
Flooring Treatments
From the simplest floor levelling
compounds to very specialist MMA
products we can offer advice and
support for your project. We supply
products from the leading quality
manufacturers and carry large stocks
for both commercial and industrial
flooring products, to include:
High early strength and fast drying PRODUCTS PAGE
cementitious screeds (for both pump and Flooring & Tiling
hand application), levelling compounds, tile Ardex 54
adhesives and screed additives.
Everbuild 70
Fast curing, high strength, pre-batched Fosroc 71
cementitious and resin based repair mortars. Instarmac 74
Synthetic resin flooring, based on epoxy, Ronacrete 76
polyurethane and methacrylate systems to Sika 77
provide sealers/coatings, high build coatings, Weber 80
multi-layer quartz broadcast systems, flow
Landscape Products
applied (self-smoothing) flooring, trowel
applied screed and heavy duty systems. Everbuild 81
Instarmac 82
Fully compatible surface DPM and bonding
agents for concrete, screeds and resin flooring; RonaDeck 84
along with surface hardeners, specialist Sika 86
impregnation and priming systems.
Tiling
Our Tiling products range is based
round the leader in innovation Ardex
UK. Ardex supply everything that the
professional tiler would need.
54 Flooring & Tiling
Ardex
Tile Adhesives
Ardex X 7
Extremely versatile adhesive for internal/
external applications, swimming pools, etc.,
suitable for walls and floors.
Size: 20kg
Ardex X 7 G Plus
Ardex X 7 G Plus is specifically formulated to
have a very high yield per bag (Ceram Research
has confirmed approximately 20% more
coverage per kg compared to traditional tile
adhesives) along with enhanced properties of
adhesion and flexibility. Ideal for fixing fully
vitrified or porcelain tiles (internal areas only)
and other tiles with low porosity as well as
glass and porcelain mosaics without the need
for an admixture.
Size: 18kg
Ardex X 7 R / X 7 R W
Use with all tile types including fully vitrified,
porcelain and mosaics. For internal and
external applications including swimming
pools, etc. Suitable for walls and floors, with
built-in admix. Tiles can be grouted and
trafficked only 2 hours after fixing.
Available in white and grey.
Size: 20kg
Flooring & Tiling 55
Ardex S 16 / S16 W
White or grey rapid hardening and drying wall
and floor adhesive for fixing ceramic and natural
stone tiles, glass mosaics, porcelain and fully
vitrified tiles in internal dry or intermittently
damp locations. Can be grouted or trafficked 2-3
hours after fixing. Ardex S 16 W is ideal for fixing
translucent marble and glass mosaics.
Available in white and grey.
Size: 20kg
Ardex S 20 and S 20 W
Ardex S 20 fast setting cementitious
adhesive is classified as C0 F and ARDEX
S 20 W is classified as C2 F improved fast
setting cementitious adhesive with additional
characteristics in accordance with BS EN
12004. Ardex S 20 is a special rapid hardening
and drying, cement-based adhesive for fixing
uncalibrated natural stone floor and wall tiles
in internal situations. Tiles fixed with ARDEX S
20 can be grouted and subjected to foot traffic
3 hours after fixing at normal temperatures.
Available in white and grey.
Size: 22kg
Ardex X 32
Natural Stone Adhesive is classified as C2
FTE S1 improved fast setting cementitious
adhesive with additional characteristics plus
reduced slip and extended open time in
accordance with BS EN 12004. Ardex X 32
Natural Stone Adhesive is a special rapid
hardening and drying, cement-based adhesive
for fixing natural stone floor and wall tiles and
uncalibrated natural stone floor tiles. It may
also be used for concrete slabs and ceramic
tiles including porcelain tiles in internal and
external situations.
Size: 20kg
56 Flooring & Tiling
Ardex X 77 / X 77 W
Exceptionally long open time. Heavier, larger tiles
can be used without slipping. Fibre reinforced,
flexible tile adhesive for internal/external use,
swimming pools, etc., use with all tile types
including fully vitrified, porcelain and mosaics.
Suitable for walls and floors, with built-in admix.
Available in white or grey.
Size: 20kg
Ardex X 77 S / X 77 W S
Fibre reinforced rapid setting adhesive. Tiles
can be grouted and trafficked only 90 minutes
after fixing. Use with all tile types including fully
vitrified, porcelain and mosaics. For internal and
external applications including swimming pools,
etc. Suitable for walls and floors, with built-in
admix.
Available in white or grey.
Size: 20kg
Ardex X 78
A grey MICROTEC fibre reinforced cement based
floor tile adhesive with an extended open time
of up to 60 minutes. It is specifically formulated
to have enhanced properties of adhesion
and flexibility, and its unique semi-pourable
consistency makes it ideal for fixing large
format floor tiles.
Size: 20kg
Ardex X 78 S/ X 78 W S
Fibre reinforced rapid setting floor tile adhesive.
Tiles can be grouted and trafficked 90 minutes
after fixing. For fixing all types of ceramic floor
tiles, mosaics, etc. Its enhanced adhesion
properties and easily workable consistency
make it ideal for solid bedding fully vitrified
and porcelain large format tiles. For internal/
external applications.
Available in white or grey.
Size: 20kg
Flooring & Tiling 57
Ardex X 7001 / X 7001 W
Fibre reinforced pourable adhesive. Specifically
designed for fixing all types of floor tiles,
including porcelain, to various surfaces
including wood-based sheets and boards. Tiles
can be grouted and trafficked 2 hours after
fixing. Ardex X 7001 W white is ideal for fixing
light and translucent marble and limestone.
Available in white and grey.
Size: 20kg
Ardex S 21
For large format tiles. Pourable consistency.
May be used to smooth rough bases and
make up screed levels. For internal/external
applications including swimming pools. Tiles
can be grouted and trafficked 3 hours after
fixing.
Size: 22kg
Ardex D 15
Ardex D 15 is an easy to apply, ready mixed
wall tile adhesive with excellent slump
resistant properties. Used for fixing ceramic
tiles and mosaics to gypsum plaster,
paperfaced plasterboards, concrete cement and
sand renders, as well as for fixing porous bodied
tiles to existing ceramic tiles. Suitable for use
in dry internal locations, as well as in domestic
showers and bathrooms.
Size: 10 Litres
58 Flooring & Tiling
Ardex D 20
Ardex D 20 is a ready mixed adhesive for fixing
ceramic tiles and mosaics to all internal walls
in dry or intermittently wet locations, e.g.
domestic showers, kitchens and bathrooms. No
primer required, easy to apply with excellent
slump resistance and offers up to 20 minutes
open time and 40 minutes tile adjustability.
Tremendous adhesion strength and reliability
Sizes: 5 Litre, 10 Litres
Ardex D 30
Ardex D 30 is classified as a D2 TE adhesive to
BS EN 12004. It is a water resistant, non-slip,
ready-mixed wall tile adhesive with an extended
open time. The additional characteristics of
Ardex D 30 are high adhesion strength after
water immersion and high adhesion strength
after exposure to elevated temperatures making
this product ideal for use in commercial and
domestic showers, kitchens and bathrooms.
Size: 10 Litres
Ardex Tile Adhesives
Type Size Coverage
Ardex X 7 20kg 1.3kg/m/mm of bed thickness
Aredex X 7 G Plus 18kg 1kg/m/mm of bed thickness
Ardex X 7 R / X 7 RW 20kg 1.4kg/m/mm of bed thickness
Ardex S 16 / S 16 W 20kg 1.35kg/m/mm of bed thickness
Ardex S 20 and S 20 W 22kg 1.2kg/m/mm of bed thickness
Ardex X 32 20kg 1.2kg/m/mm of bed thickness
Ardex X 77 / X 77 W 20kg 1kg/m/mm of bed thickness
Ardex X 77 S / X 77 W S 20kg 1.2kg/m/mm of bed thickness
Ardex X 78 20kg 1.2kg/m/mm of bed thickness
Ardex X 78 S / X 78 W S 20kg 1.2kg/m/mm of bed thickness
Ardex X 7001 / X 7001 W 20kg 1.4kg/m/mm of bed thickness
Ardex S 21 22kg 1.8kg/m/mm of bed thickness
Ardex D 15 10 Litres (1 Litre per m) 3mm x 3mm
Ardex D 20 5, 10 Litres 10m / 10 Litres for 1mm bed thickness
Grouts
Ardex C 2
For joint widths from 2mm upwards, suitable
for wall and floor tiling in internal/external
locations, swimming pools, etc. Available in
6 colours: grey, white, limestone, sandstone,
beige or anthracite.
Sizes: 5kg, 11kg
Ardex-Flex FL
For wall and floor tile joints from 3-15mm
wide in internal/external locations, including
swimming pools. With built-in admix. Available
in 32 colours.
Sizes: 2.5kg, 10kg
Ardex-Flex FS
Water repellent and dirt resistant flexible tile
grout for tile joints up to 4mm wide. Easy
to apply and clean off, suitable for use in
internal/external locations, swimming pools,
etc. Suitable for walls and floors. With built-in
admix. Available in 32 colours.
Size: 2.5kg, 10kg
60 Flooring & Tiling
Ardex MG
Ardex MG is suitable for grouting natural stone
or marble wall or floor tile joints up to 8mm
wide. The Ardex MG powder, when mixed with
water, produces a soft, creamy, easily worked
mortar with good filling properties, enabling
deep joints to be filled in one operation. The
hardened grout is suitable for internal use in
intermittently wet conditions. The surface of
the hardened grout has a textured finish and is
not impervious. Available in five colours: light
grey, dark grey, white, limestone and sandstone.
Size: 11kg
Ardex Grouts
Type Size Coverage*
Ardex C 2 5, 11kg 0.25 - 2kg/m2
Ardex-Flex FL 2.5, 10kg 0.4 - 2.2kg/m2
Ardex-Flex FS 2.5, 10kg 0.25 - 2kg/m2
Ardex MG 11kg 0.3 - 14kg/m2
Ardex K 15
Especially useful where the installation time
of the floor finish must be kept to a minimum.
Ardex K 15 can be applied up to 35mm thick
with the inclusion of Ardex Coarse Aggregate.
Ardex K 15 is rapid hardening, walkable after
2 hours, and regardless of thickness, floor
coverings can be applied the next day. Suitable
for floors with under floor heating.
Size: 22kg
Ardex K 15-HB
Rapid hardening and drying pump or hand
applied levelling mortar which can be tiled on
4 hours after application. Ideal for interior, fast
track tiling.
Suitable thickness 5mm-35mm in one
application.
Size: 25kg
Ardex A 55
Ardex A 55 is extremely quick drying which
makes it ideal for areas that require rapid repair
and renovation work i.e. hospital wards that
need to remain open. The sub-floor is ready to
receive floor coverings after only 1 hours and
the adhesive can be applied whilst Ardex A 55
is still damp.
Suitable thickness up to 10mm in one
application.
Size 25kg
62 Flooring & Tiling
Arditex
For over 40 years Arditex has offered
unbeatable performance. Partially self-
smoothing, floor coverings can be applied after
4 hours and it is suitable for use over most old
adhesive residues, and under DPMs.
Arditex can be applied up to 30mm with the
inclusion of Ardex Coarse Aggregate.
Suitable thickness up to 12mm in one
application.
Sizes: 4.8kg Bottle, 22kg Powder
Arditex NA
Arditex NA is a self-smoothing, protein free,
low odour latex levelling compound. It is
used for the preparation of cement/sand and
concrete screeds, metal, quarry tiles, asphalt
flooring (grade 1), granolithic or terrazzo floors,
prior to applying the floor tiles. May also be
used for pre-smoothing timber floors prior to
oversheeting with plywood and can be used
under a damp proof membrane, such as Ardex
DPM. Also used to encapsulate under-tile
heating cables to concrete, screeds and thermal
tilebacking boards.
Suitable thicknesses up to 12mm in one
application.
Sizes: 4.85kg Bottle, 20kg Powder
Flooring & Tiling 63
Arditex RS Plus
A cost effective, self-smoothing latex levelling
compound with excellent properties of
adhesion and water resistance. It is designed
for use on sub-floors such as concrete, cement
and sand screeds, terrazzo and quarry tiles, etc.
Arditex RS Plus may also be applied to dense
impervious surfaces such as ceramic tiles
and steel sub floors that have been primed
with ARDEX P 82 Primer. Arditex RS Plus can
be laid from a feather edge up to 6mm thick
and to greater thicknesses by incorporating
ARDEX Aggregate. The rapid setting properties
mean a 3mm layer will be ready to receive
floorcoverings after only 6 hours at 20C.
Sizes: 4.8kg Bottle, 20kg Powder
Ardex Feather Finish 5kg, 11kg bag 50m2 coverage per 11kg bag
64 Flooring & Tiling
Fast Track Floor Screeding
Ardex A 35
Used in place of Portland Cement in cement/
sand screeds, Ardex A 35 produces a floor
screed that can be walked on after 3 hours
and is dry enough to receive tiling after 24
hours regardless of thickness. After 1 day the
compressive and tensile strengths of an Ardex
A 35 screed exceed the acceptable minimum
attained by a conventional screed after 28 days.
Size: 25kg
Ardex A 35 Mix
Unique ready-for-use, rapid drying, pre-blended,
screeding and screed repair mortar that just
requires water to produce a screeding mortar
with rapid strength development for receiving
tiling after 24 hours, regardless of thickness.
Size: 25kg
Ardex A 23
A special cement for producing a rapid
hardening floor screed for internal use which
allows ceramic tiles to be fixed after 48 hours,
natural stone after 72 hours, and resilient floor
coverings after 6 days.
Size: 20kg
Flooring & Tiling 65
Ardex A 38
A special cement for producing a rapid
setting, rapid hardening and rapid drying floor
screed. For internal and external use including
swimming pools, allowing ceramic tiles or
stone to be fixed after only 4 hours even on
unbonding floating screeds.
Size: 25kg
Ardex PSRS
A two component epoxy resin designed for
strengthening and restoring poorly compacted
and low strength cement/sand screeds. Ensure
Ardex PSRS is always keyed with Ardex Fine
Aggregate.
Size: 10kg two component tin.
Ardex Fast Track Floor Screeding
Type Size Coverage
Ardex A 35 25kg approx 2.3m2 per 25kg bag for 30mm 1:4 screed
Ardex A 35 Mix 25kg approx 1.85kg/m2/mm
Ardex A 23 20kg 1:7 mix = 0.27kg/m2/mm
Ardex A 38 25kg 1:5 mix = 0.31kg/m2/mm
Ardex PSRS 10kg two component tin Dependent on porosity and depth of the screed
66 Flooring & Tiling
Fast Track Industrial Topping
Ardex K 80
Ardex K 80 is a cement based compound for
resurfacing and levelling existing concrete
floors to give a hard, smooth, flat wearing
surface, or as a base. It is suitable for paint and
resin coatings.
Size: 25kg
Ardex SD-T B
Ardex SD-T B is pre-blended with graded
aggregate which gives significant cost savings
on floors that require greater application
thicknesses, and is designed to pre-level
concrete surfaces prior to applying Ardex K 80.
Size: 25kg
Ardex Fast Track Industrial Topping/Wearing
Surface
Type Size Coverage
Ardex K 80 25kg 1.65kg/m2/mm
Renovation
Ardex K 301
A fast setting cost effective solution for
smoothing rough or damaged concrete or
cement/sand screeds and is suitable for
internal and external applications prior to tiling.
Ardex K 301 is walkable after 2-3 hours and
can be tiled onto after 24 hours. Use to level
uneven surfaces, such as paths and patios.
Type Size Coverage
Flooring & Tiling 67
Tiling Renders
Ardex AM 100
Specially formulated pre-blended cement/sand
render, requiring only the addition of water to
produce a slump free mortar which can be
applied 2 -20mm and is ready to receive wall
tiling only 2 hours after application.
Type Size Coverage
Ardex AM 100 25kg approx 3.2m2
@ 6mm thick
Ardex P 51
Ideal for a wide range of applications, Ardex
P 51 seals and primes gypsum based plasters
and screeds and minimises air bubbles rising
through levelling compounds and porous
surfaces. Ardex P 51 provides up to 160m2 per
unit and can also be used with Ardex A 35 to
produce a bonding slurry. Usually brush applied.
Size: 15kg, 25kg
Ardex P 82
For use on all dense impervious surfaces,
including hard flooring grade asphalt, ceramic
and quarry tiles and rigid metal sub-floors.
Apply by roller or squeegee.
Size: 2kg, 6kg
68 Flooring & Tiling
Ardex E 90
Mortar admix for use with Ardex cement-based
adhesives. Gives elastic and water repellent
properties plus enhanced adhesive strength if
fixing to smooth or glazed surfaces.
Size: 2kg
Ardex E 101
Grout admix for Ardex C 2, F 4 and GK cement-
based grouts and normal cement/sand grout
mortars. For elastic and water repellent tile
joints.
Size: 15kg
Aggregate
A dry, pre-packed 3mm graded aggregate for use with Ardex sub-floor smoothing compounds
where thick applications are required.
Size: 25kg
Ardex Primers & Admixes
Type Size Coverage
Ardex P 4 8kg 40m2 per unit on most typical substrates
Ardex P 51 15, 25kg up to 100m2 per 5kg bottle diluted 1:3
Ardex P 82 2, 6kg approx 30-60m2 per 6kg
Ardex E 90 2kg 3.6kg per 22kg bag of Ardex X 7 / S 16
Ardex E 101 15kg 1kg per 11kg bag of Ardex grout
Waterproofing
Ardex WPC
A flexible two-component waterproof coating
for use prior to tiling in commercial shower
situations. Also ideal for use on moisture
sensitive backgrounds prior to tiling. Tiles can
be applied just 90 minutes after application of
the second coat.
Size: 5kg Bottle, 5kg Powder
Ardex DPM
A two coat, colour coded, fast curing product
ideal for use on very porous substrates
to prevent pinholing. Can accommodate
Hygrometer readings up to 98% RH.
Size: 6kg, 10kg, 25kg
Ardex DPM 1 C
Provides a surface damp proof membrane
and barrier to rising ground moisture. Easy to
apply, one coat application that guarantees
the early laying of all floor coverings and can
accommodate Hygrometer readings up to
98% RH and has excellent resistance to water,
grease, oil, etc.
Size: 6kg, 10kg, 25kg
70 Flooring & Tiling
Ardex DPM 1 C Rapid
A rapid drying, one coat DPM that can be
overcoated after 4 hours making it ideal for
fast track installations. Ardex DPM 1 C R can
accommodate Hygrometer readings up to
98% RH and has excellent resistance to water,
grease, oil, etc.
Size: 6kg, 10kg
Ardex Waterproofing
Type Size Coverage
Ardex WPC Liquid 5kg bottle, Powder 5kg bag 6.6m2 per pack, giving 0.8mm coating (2 coats)
Ardex DPM 6, 10, 25kg 4m2 per kg
Ardex DPM 1 C 6, 10, 25kg 1.8m2 per kg
Ardex DPM 1 C Rapid 6, 10kg 2.5m2/kg at 250 microns, 1.8m2/kg at 350 microns
Everbuild
SBR Bond
Bonding and waterproofing admixture to add to
screeds, renders and repair mortar mixes.
Size: 5 Litres, 25 Litres
Flooring & Tiling 71
Fosroc
Floor Coatings & Dryshakes
Nitoflor FC130
High performance water dispersed epoxy
resin floor coating for use where resistance
to oils and liquids is required. Suitable for use
on walls and floors in warehouses, garages,
light industrial and food processing areas,
kitchens and other areas of pedestrian and light
vehiclular traffic.
Size: 5kg
Nitoflor FC140
High performance solvent based epoxy resin floor
coating for use where high chemical resistance is
required. Suitable for use in production assembly
areas, workshops, dairies, soft drinks and bottling
plants, breweries, kitchens, plating shops,
processing plants, dye works, etc.
A fine textured non-slip finish can be achieved
with the addition of nonslip grains to FC 130/140.
Size: 5kg
Nitoflor Lithurin
Hardener and dustproofing compound for
concrete surfaces. Typical applications include
industrial floors, light engineering works,
warehouses, abbatoirs, car parks, dams,
reservoirs, tanks, silos and flues. Nitoflor
Lithurin is a white, soluble, crystalline powder.
When mixed with water and applied to the
floor, the solution penetrates the concrete
reacting with lime and other soluble particles
to form granite hard crystals, leaving a
permanent, hard wearing and dust free surface.
Size: 15kg
72 Flooring & Tiling
Nitoflor Hardtop S
Dry-shake floor hardener for new concrete floors. Nitoflor Hardtop S is a ready-to-use factory
blended powder that is easily trowelled into fresh concrete and cures to provide a dense,
non-porous surface which is extremely hard wearing and abrasion resistant. ideal for industrial
areas with heavy traffic, e.g. power stations, agricultural buildings, warehouses and loading bays.
Size: 25kg
Fosroc Nitoflor
Type Size Coverage
Nitoflor FC130 5kg 35-40m2 pack per coat
Nitoflor FC140 5kg 35-40m2 pack per coat
with nonslip grains - 24-30m2 pack per coat
Nitoflor Lithurin 15kg 1 coat application 200m2
2 coats 150m2
Nitoflor Hardtop S 25kg 5kg/m2
Levelling Compounds
Cemtop S
A self-smoothing cementitious underlayment
for a wide variety of floor finishes, e.g. tiles,
carpets and vinyl sheeting. Suitable for
residential and commercial buildings, for new
construction or refurbishment projects.
Size: 25kg
Flooring & Tiling 73
Cemtop GP30
A general purpose cementitious floor levelling
compound/underlayment for the preparation
of floor surfaces before the application of tiles,
carpet, vinyl, etc.
Size: 25kg
Cemtop GP12
A medium-duty cementitious floor surfacing
system suitable for use in areas which will
be subject to foot traffic or light commercial
use. Also suitable for use as a heavy duty
underlayment for the preparation of floor
surfaces before the application of tiles, carpet,
vinyl, etc.
Size: 25kg
Cemtop XD
A heavy-duty highly abrasion resistant
cementitious floor surfacing system for the
reinstatement of industrial floor surfaces.
Size: 25kg
Fosroc Cemtop
Type Size Coverage
Cemtop S 25kg 1.7kg/m2/mm thick
Cemtop GP30 25kg 1.7kg/m2/mm thick
Cemtop GP12 25kg 1.7kg/m2/mm thick
74 Flooring & Tiling
Instarmac
Level IT one HDB: Single-Part Levelling Compound
Level IT one HDB is a single-part cementitious
floor leveller, containing a blend of specially
graded fillers, fine cements and polymers for
smoothing and levelling internal floors with
irregular substrates. Open time 20-30 minutes,
set time 2-3 hours.
Size: 25kg
RonaFloor HB200
RonaFloor HB200 is a solvent free high build
epoxy resin floor coating for use on concrete,
screeded and granolithic floors. It provides
excellent abrasion and chemical resistance
for floors subject to constant traffic. Two coats
will provide an easy to clean gloss finish and
achieve a dry film thickness of 400 microns.
RonaFloor EWB
RonaFloor EWB is a water based epoxy resin
coating for use on concrete, screeded and
granolithic floors. It has good adhesion to a
wide variety of substrate to produce a tough,
hard wearing floor finish in a range of colours.
RonaFloor
Type Size Coverage
RonaFloor HB200 5kg, 10kg, 20kg 15m2 per pack per coat - norm 2 coat application
RonaFloor EWB 5kg, 10kg, 20kg 15m2 per pack per coat - norm 2 coat application
Flooring & Tiling 77
Sika
Dryshakes & Resin Flooring
SikaCem 810
SikaCem 810 is a patented one-component
water based acrylate bonding agent and
integral mortar admixture. When diluted it
produces a gauging solution for improving
cementitious mixes. It should be added to
water then mixed with cement and sand/
aggregate to produce: Bond coat/slurry,
Pourable micro concrete, renders, screeds with
enhanced mechanical properties.
Size: 25 litres.
Sika Dryshakes
Sikafloor-1 MetalTop
One-component ultra tough metallic alloy dry shake hardener for concrete floors, formally
Armorex SuperTop.
Sikafloor-2 SynTop
One-component synthetic aggregate based dry shake hardener for concrete floors formally
Armorex Armorshield.
Type Size Yield per pack
Sikafloor-1 MetalTop 25kg 3.6m2
Sikafloor-2 SynTop 25kg 5m2
Some dry shakes can also be obtained in 1500kg bags.
Sikafloor-156
Sikafloor-156 is a two-part, low viscosity,
solvent free epoxy resin for priming concrete
substrates, cement screeds and epoxy mortars.
Type Size Coverage
Sikafloor-2530W
Sikafloor-2530W is a two-part solvent free
coloured water dispersed easily applied epoxy
coating. Can be subjected to normal up to
medium heavy mechanical and chemical
loading.
Sikafloor-81 EpoCem
Sikafloor-81 EpoCem is a three-part, epoxy
modified cementitious, fine textured mortar
for self smoothing floor screeds in thin layers
of 1.5 to 3mm. Use 2mm as a damp proof
membrane or for fast track floor application
onto newer concrete, use primer Sikafloor
155W.
Sikafloor
Type Size Coverage
Sikafloor-264 10kg Roller coat 0.3kg/m2/coat
Sikafloor-2530W 6, 18kg 0.2-0.3kg/m2/mm
Adhesives
SikaBond T2
High performance one-part elastic bonding
polyurerthane adhesive for the 'Liquid battern'
system of fixing solid wood flooring.
Size: 300ml
SikaBond T54
High build one-part trowel grade polyurethane
elastic timber flooring adhesive for bonding solid
wood flooring application by notched trowel.
Size: 13kg
SikaBond
Type Size Coverage
SikaBond T2 310ml 1 x 310cc cartridge per m2
80 Flooring & Tiling
Weber
weber.tec acrylic sealer
weber.tec acrylic sealer is a low-viscosity,
colourless, penetrating sealer. The product
is based on a pure acrylic resin in aromatic
solvents. The concept is to achieve an in-
surface seal with no material build up. For
severely exposed surfaces, one coat of weber.
tec aquapel WR prior to two coats of weber.tec
acrylic sealer is recommended.
Type Size Coverage
weber.tec acrylic sealer 5, 25, 200 litre non-returnable drums 4-8m2 per litre in 2 coats
Flooring & Tiling 81
Landscape Products
Everbuild
Geofix
Used for the permanent filling of wide joints
(>5mm) in external paving and stone surfaces.
Available in Buff and Mid-Grey.
Type Size Usage
Flowpoint
A rapid setting flowable grout that exceeds the
requriements of BS 7533. With a proven track
record spanning over 25 years, Flowpoint has
met demands in both heavily trafficked and
domestic paving environments long before the
British Standard was introduced. It is fast and
efficient to apply, affording the ability to grout
large areas of of paving quickly and cleanly,
meaning areas can be open to foot traffic after
just 1 hour.
Size: 25kg
Flooring & Tiling 83
Flowpoint ECO
A rapid setting flowable grout containing
20% recycled glass, that exceeds the strict
requirements of BS 7533. With a proven track
record, Flowpoint ECO has met demands in
both heavily trafficked and domestic paving
environments long before the British Standard
was introduced. It is fast and efficient to apply,
affording the ability to grout large areas of
paving quickly and cleanly, meaning areas can
be open to foot traffic in just 1 hour.
Size: 25kg
Flowpoint Smooth
Flowpoint Smooth is the 3rd variation of
our award-winning flowable grout. Its finish
is ideally suited to smooth paving stones
and slabs providing a seamless surface to
your construction. What's more the product
boasts all the features and benefits of regular
Flowpoint.
Size: 25kg
Cempoint
A gun injected mortar that provides a quick and
clean method of jointing both horizontal and
vertical surfaces (such as cladding). Combines
the benefits of meeting the requirements of
the exacting standards of BS 7533, with the
convenience of being installed using a hand-
held Cempoint Mortar Gun. Please contact
Ultrascape sales on 01827 871871 for gun
enquiries.
Size: 20kg
84 Flooring & Tiling
RonaDeck Resin Bonded
RonaDeck Resin Bonded
The RonaDeck system combines a fast curing
resin with natural aggregates to give the look
and feel of loose stones and gravel but without
the inherent mess. The applied surface is safe,
slip resistant "non-slip" and decorative. Can be
used for pedestrian, industrial and traffic areas
giving excellent grip in a variety of colours and
texture.
Flooring & Tiling 85
RonaDeck Aggregates
A range of coloured aggregates for the Fast Grip system.
RonaDeck Resin
Type Size Coverage*
Resin Bonded Standard Surfacing Resin 1.95, 7.5, 20kg 1.0-1.8kg/m2*
Resin Bonded SSurfacing Winter Grade 7.5, 20kg 3.8-4m2/litre
Resin Bonded Seal Coat UV 5, 25 litre 3-11m2/litre/coat
Resin Bonded Seal Coat LS 2, 7.5, 31kg
Resin Bonded Steel Primer 5 litre 4-4.5m2/litre
Resin Bonded XP5 Resin 1.97, 9.5, 19kg 0.8-1.5kg/m2*
*Depending on aggregate
Grouts && Anchors
Grouts Anchors 87
Precision Grouting
SIG Construction Accessories supply
cementitious, polyester or epoxy
products for the alignment and
levelling and gap filling in the
following and many more applications:
Crane rails Balustrades
Capstans Crash barriers
Landing lights Pump bases
Under-rail pads Sluice Gates PRODUCTS PAGE
Sleeper bearings Machine bedding Cementitious Grouts 88
Epoxy Based Anchor Grouts 93
Bridge bearings Baseplates Cementitious Anchor Grouts 94
Polyester Anchor Grouts 95
Anchoring & Fixing Chemical Fixings 97
We offer products to aid the high Steel Anchors 102
strength and corrosion resistant Lightweight Anchors 105
Type Size Yield / Coverage
Five Star Grout 25kg 14 litres at pourable consistency
Five Star Grout SP 25kg 14 litres at pourable consistency
weber.cem Construction Grout 25kg 13 litres at pourable consistency
Conbextra GP
General purpose, non-shrink cementitious
grout for gap thicknesses 10 to 75mm.
Recommended applications at flowable
consistency include stanchion base plates,
bolt pockets and void filling. At trowellable
consistency it is recommended for bedding
load bearing components.
Size: 25kg
90 Grouts & Anchors
Conbextra HF
High flow, non-shrink, cementitious grout for
gap thicknesses 10 to 100mm. Recommended
applications include:
Large stanchion baseplates
Joints between pre-cast concrete panels
Pumped grouting applications
Grouting applications where pouring access is
restricted
Size: 25kg
Conbextra BB
Non-shrink cementitious bridge bearing grout. Used for grouting beneath bridge bearings, parapet
posts, flanged lighting columns.
Size: 25kg
Conbextra TS
Non-shrink cementitious grout for thick section
grouting of thicknesses 75-500mm. It is
ideally suited to thick section grouting as it
contains aggregates that reduce exothermic
heat generation and risk of thermal cracking
common with gap thicknesses in excess of
100mm.
Size: 25kg
Conbextra UW
Non-shrink cementitious grout for underwater applications.
Size: 25kg
Grouts & Anchors 91
Cebex 100
Expanding and plasticising grout admixture
used with either neat cement or sand and
cement mixes. It is incompatible with High
Alumina Cement.
Size: 227g
Fosroc Cementitious Grouts
Type Size Yield
Conbextra GP 25kg Flowable: 13.25 litres
Conbextra HF 25kg Flowable: 13.25 litres
Conbextra BB 25kg Flowable: 13.5 litres
Conbextra TS 25kg Flowable: 12 litres
Conbextra UW 25kg Flowable: 14.5 litres
Masterflow 765
A ready to use, non-shrink construction grout
for effective contact and support. It can be used
from fluid to plastic consistencies for grouting
of equipment and machinery, bearing pads,
rails and anchoring.
High early strength for rapid installation and
use of plant
Durable, uniform dense structure
Good workability for up to 1 hour at 20C
Can be applied in thicknesses ranging from
10-75mm
Recommended for:
Grouting bearing pads and plinths
Grouting under machinery base plates,
stanchion bases and crane rails
Anchoring bolts, reinforcing bars and rods
Underpinning
92 Grouts & Anchors
Sika Grout 212
A high strength pre-packed non-shrink
cementitious grout. For grouting bolts, fittings,
anchor bolts, machine beds, chain bolts,
columns, bridge bearings, holes, cavities, etc.
for gap sizes 10 - 75mm.
Size: 25kg
Sika Cementitious Grouts
Type Size Coverage
Sika Grout 212 25kg 14 litres at pourable consistency
Sika Armorex Construction Grout 25kg 14.2 litres
Grouts & Anchors 93
Conbextra EP10
Conbextra EP10 is for grouting gap thicknesses
from 0.25 to 10mm. It is an all-liquid system
consisting of a base and hardener.
Size: 3 Litres
Conbextra EPR
Conbextra EPR is for grouting gap thicknesses
from 10 to 120mm and is a three-component
system consisting of base resin, liquid hardener
and specially graded inert fillers.
Size: 8 Litres/ 16 Litres
94 Grouts & Anchors
weber.tec EP Pourable Grout
Specially formulated from epoxy resin and
graded aggregates producing materials with
exceptional tough characteristics.
Capable of withstanding high dynamic loads
High compressive and tensile strength
Very good chemical resistance
Cure within the temperature range 5C to
35C
Negligible shrinkage factor allows use for
underplate or rail grouting.
Grout remains in contact with the underside
Can be placed in much thinner sections than
cementitious grouts resulting in cost savings,
chemical resistance, good flow characteristics
and negligible shrinkage
Size: 25kg
Sikadur 42
Pourable epoxy grout. Cures down to 5C.
Fast setting.
Size: 24kg
6 Litres per 12kg
Cementitious Anchor Grouts
BASF Masterflow 885
A non-shrink, metallic reinforced grout for grouting and precision bearing operations where
shrinkage must be eliminated to achieve full bedding and load transfer.
Turbines, generators and compressors
Rolling, stamping, drawing and finishing mills
Paper machine soleplates
Anchor bolts and rods
Machinery and equipment requiring high strength maximum bearing
Size: 25kg
Grouts & Anchors 95
Lokfix S25
(pourable grade, 25 minute gel at 20C):
For use where the hole is 8 to 40mm greater in
diameter than the bar.
Lokfix P25
(pumpable grade, 25 minute gel at 20C):
Used in overhead or horizontal holes where the
hole is up to 25mm greater in diameter than
the bar. The thixotropic nature of Lokfix P25
reduces flow of grout out of the hole.
Fosroc Lokfix usage guide
To determine the quantity of material per 100ml of hole depth
Bolt Diameter
32 20 22 26 40
Chemical Fixings
Sika Anchorfix-1
AnchorFix-1 can be injected into most substrates
including concrete, brickwork, blockwork, hollow
and solid masonry, solid rock and natural
stone and is suitable for practically every type
of anchoring and fastening method, such as
threaded rods, steel reinforcement, masonry
wall ties and anchor sockets. Supplied in a single
300ml cartridge that fits into a standard sealant
gun, the two-component styrene free polyester
resin Sika AnchorFix-1 is mixed in the nozzle for
simplicity and error free operation.
Size: 300ml
Sika AnchorFix-2
A solvent and styrene free, epoxy acrylate based, two-part anchoring adhesive.
Size: 300ml
Type Size Coverage
Sika AnchorFix-1 300ml standard cartridge -
100 Grouts & Anchors
Epomax Vinylester Resin - Styrene Free
Easy to pump, performance resin. Fast curing
vinylester resin, saving time and money on site.
Now improved for a stronger fix, easier injection
and faster curing time.
Substrates
Suitable for concrete, hollow brick, solid brick,
solid brick stone, hollow floor beams, hollow
block wall.
Type Size Quantity
Epomax Cartridge Grey 150ml 1
Epomax Cartridge Grey 380ml 1
Epomax Cartridge Grey Bulk* 380ml 1
Epomax / C Mix Nozzle - 1
Extension Nozzle - 1
Injection Tool - 1
Type Size Quantity
Epobar Cartridge 410ml 1
Epobar Nozzle - 1
Type Thread Total Drill Effective Useable Box
Dia x Length Diameter Anchor Length Quantity
Length Depth
FBN 6/10 A4 M6 x 25 68mm 6mm 40mm 10mm 100
FBN 6/30 A4 M6 x 30 88mm 6mm 40mm 30mm 100
FBN 8/10 A4 + 23 A4 M8 x 41 76mm 8mm 48/35mm 10/23mm 50
FBN 8/50 + 63 A4 M8 x 81 116mm 8mm 48/35mm 50/63mm 50
FBN 10/15 + 23 A4 M10 x 51 89mm 10mm 50/42mm 15/23mm 50
FBN 10/50 + 58 A4 M10 x 87 125mm 10mm 50/42mm 50/58mm 20
FBN 10/100 + 108 A4 M10 x 134 174mm 10mm 50/42mm 100/108mm 20
FBN 12/15 + 35 A4 M12 x 71 113mm 12mm 70/50mm 15/35mm 20
FBN 12/45 + 65 A4 M12 x 103 143mm 12mm 70/50mm 45/65mm 20
FBN 12/100 + 120 A4 M12 x 157 202mm 12mm 70/50mm 100/120mm 20
FBN 16/10 A4 M16 x M54 109mm 16mm 64mm 10mm 10
FBN 16/25 + 45 A4 M16 x 89 144mm 16mm 84/64mm 25/45mm 10
Type Size Quantity
FWB S Wall bolt - shield only 6, 8, 10, 12, 16, 20mm 10, 25, 50
FWB L Wall bolt - loose bolt type 6, 8, 10, 12, 16, 20mm 10, 25, 50
FWB P Wall bolt - projecting bolt type 6, 8, 10, 12, 16, 20mm 10, 25, 50
FWB H Wall bolt - hook bolt type 12, 14, 16, 20mm 25, 50
FWB E Wall bolt - eye bolt type 6, 8, 10, 12, 16mm 10, 25, 50
Grouts & Anchors 105
Sizes Available
M6 M8 M10 M12 M16
M6 x 20 M8 x 25 M10 x 20 M12 x 25 M16 x 50
M6 x 25 M8 x 35 M10 x 25 M12 x 30 M16 x 60
M6 x 30 M8 x 45 M10 x 30 M12 x 40 M16 x 70
M6 x 40 M8 x 40 M10 x 40 M12 x 45
M10 x 45 M12 x 50
M10 x 50
Lightweight Anchors
Spit Grip Lip & Grip Drop-In Anchors
A broad range of female anchors for threaded
rod, Spit drop-in anchors, including lipped
anchors for a flush finish, not dependent on
hole depth.
Spit Grip Stainless Steel Anchor M16 65mm 23mm 70mm 70Nm 25
Grouts & Anchors 107
Sealants, Joint Fillers & Chemicals 111
TP600
TP600 is a soft and flexible open cell extensively tested and has a proven reputation
polyurethane foam, impregnated with an across both the UK and Europe. Various roll
acrylic based, UV stabilised resin. The resin is sizes and length options available.
water repellent and contains a fire retardant.
It is supplied as pre-compressed rolls with
a self-adhesive side to aid initial location.
Weather tight against the most severe
combinations of wind and rain, it satisfies most
expectations as an external weather seal in
building and civil engineering applications.
With full BBA approval, the product has been
Joint/gap size to be Tape depth into joint Tape order reference Roll Length (m)
filled (mm) (a) (mm) (b)
2 10 10/2 12.5
3 10 10/3 10.0
20 20/3 10.0
3-7 10 1093-7 8.0
15 15/3-7 8.0
20 20/3-7 8.0
5-10 10 10 / 5-10 5.6
15 15 / 5-10 5.6
20 20 / 5-10 5.6
7-12 15 15 / 7-12 4.3
20 20 / 7-12 4.3
25 25 / 7-12 4.3
8-15 15 15 / 8-15 3.3
20 20 / 8-15 3.3
30 30 / 8-15 3.3
10-18 20 20 / 10-18 6.5
25 25 / 10-18 6.5
30 30 / 10-18 6.5
13-24 20 20 / 13-24 5.2
25 25 / 13-24 5.2
30 30 / 13-24 5.2
17-32 30 30 / 17-32 4.0
35 35 / 17-32 4.0
Aerofil 1 0.8 x 2m (1.6m2) 5, 10, 15, 20, 25mm
Aerofil 2 0.8 x 2m (1.6m )
2
10, 15, 20, 25, 50mm
Supplied in 2m strips.
Hydrocell XL
Hydrocell XL is a polyethylene sheet material used for forming or filling expansion joints in
concrete, brickwork and blockwork. It gives excellent support to sealants subject to hydrostatic
pressure. Hydrocell XL is WRAS approved and is typically used in potable water reservoirs, culverts
and canals, sewage tanks, roadways and hardstandings, retaining walls, basements structures,
subways, runways, taxiways and aprons.
Type Size Thickness
Hydrocell XL 1 x 2m 10, 15, 20, 25mm
Hydrocell XL supplied in the following sheet sizes and can be easily cut to the required size with a Stanley knife
or saw.
Nitoseal
Nitoseal N2 and 77 are hot-poured rubber
bitumen joint sealants. Nitoseal N2 is a low
extension grade for sealing joints in concrete
pavements, floor slabs, water retaining and
water excluding structures. Nitoseal 77 is a
hard grade for sealing low movement joints in
factory floors and areas where joints are closely
spaced and resistance to grit and traffic is of
prime importance.
Size: 15kg
Type Size
Nitoseal N2 15kg
Nitoseal 77 15kg
114 Sealants, Joint Fillers & Chemicals
Nitoseal MS100
Nitoseal MS100 is a one-part primerless non-
staining facade sealant. It is used for sealing joints
in and around concrete, brick, masonry, precast
panels, stone cladding, windows, doors and fibre
cement sheeting. Damp tolerant application.
Available in white, grey, black, portland, buff
and rustic red.
Size: 380ml Cartridge
Nitoseal MS300
Nitoseal MS300 is a one-part, abrasion
resistant floor joint sealant. It is used for sealing
movement joints in factory floors, sports stadia
terracing, shopping centres, warehouse and
distribution depots and concrete hardstanding
areas. MS300 is fast curing and is ideal for
trafficked joints. Damp tolerant application.
Available in grey only.
Size: 600ml Sachets
Nitoseal MS60
Nitoseal MS60 is a one-part general purpose
building sealant. It is suitable for sealing joints
in concrete, brickwork, blockwork, perimeter
sealing around doors and windows and for non-
trafficked floor joints. Damp tolerant application.
Available in white, grey, black, magnolia, buff,
portland, rustic red, brown and anthracite.
Size: 600ml Sachets, 380ml Cartridge
Sealants, Joint Fillers & Chemicals 115
Nitoseal MS600
Nitoseal MS600 is a one-part civil engineering
sealant for immersed conditions. It is suitable
for sealing movement joints that will be
intermittently or permanently under water.
MS600 is typically used in reservoirs, sewage
tanks, non-tidal sea walls, basements, subways,
parapets, bridges and superstructures. Damp
tolerant application.
Available in grey.
Size: 600ml Sachets
Expoflex 800
Expoflex 800 is a two-component epoxy
urethane joint sealant. It is used for sealing
internal joints where chemical resistance is
required. Expoflex 800 is suitable for use in
factories, warehouses and distribution centres,
particularly where there is forklift truck traffic.
Size: 2 Litres
Hilastic
Hilastic LM is a one-part, low-modulus silicone
sealant suitable for sealing around uPVC
windows and movement joints in concrete,
brickwork and a variety of other substrates.
Hilastic LM cures on exposure to air and
humidity to form a flexible seal that requires no
maintenance throughout its service life.
Size: 380ml
116 Sealants, Joint Fillers & Chemicals
Nitoseal MB175
Nitoseal is a flexible rubber-bitumen
gun-applied joint sealant. It is used for sealing
joints in flashings, guttering and sheet laps.
Nitoseal is an integral part of the Proofex
waterproofing system. Usage: 10mm x 10mm
joint requires 0. 1 litre/metre.
Size: 380ml
Nitoseal PU12
Nitoseal PU12 is a two-part, elastomeric joint
sealant designed for use in the water industry.
It is resistant to abrasion and bacterialogical
attack making it ideal for dirty water storage
applications. Nitoseal PU12 is typically used in
sludge digestion tanks, filtration and aeration
tanks, culverts, raw water reservoirs, and sea
walls.
Type Size
Nitoseal PU12 2 litre
Plastijoint
Plastijoint is a hand-applied flexible,
bituminous putty used for sealing joints in
dirty water retaining structures. Plastijoint is
particularly suitable for vertical and inclined
joints and is typically used in sewage disposal
works, culverts, sea walls, retaining walls,
subways and basement structures. Plastijoint is
not suitable for use in potable water retaining
structures.
Size: 5 Litres
Thioflex 600
Multi-component polysulphide sealant
available in two grades.
Gun Grade
Produced for application in both vertical and
horizontal situations. Available in grey, stone,
off-white, black, mahogany, and brick red.
Pouring Grade
Only in grey for joints in floors or other
horizontal surfaces.
Joints which are expected to experience
cyclic movements should be designed to an
optimum width:depth ratio of 2:1, subject
to the overriding recommended minimum
sealant depths set out below:
5mm for metals, glass and other non-porous
surfaces
10mm for all porous surfaces
20mm for trafficked joints and those subject
to hydrostatic pressures
The use of a primer is always required on
porous surfaces.
Type Size
Thioflex 600 gun grade 2.5 litre tin
Thioflex 600 pouring grade 5 litre tin
Primer 7* 500ml, 5 litre tins
Colpor 200PF
Cold-applied, high performance, pitch free
pavement joint sealant, for the sealing and
maintenance of joints in concrete roads,
concrete runways and hard standings. Colpor
200PF is particularly suitable for sealing areas
where fuel and oil spillage might occur such
as aircraft fuelling areas, oil terminals, garage
forecourts, parking and cargo areas. Application
by pouring or bulk gun. Concrete joint faces
should be primed with Fosroc Primer 20.
Type Size
Colpor 200PF 5 litre tins
Primer 20* 500ml tins
*1 litre of Fosroc Primer 20 is sufficient for 25 Litres of
Colpor 200PF
Joint size 10 x 10 10 x 20 10 x 25 15 x 15 20 x 20 25 x 25
Vertiseal CE
Vertiseal CE is a two-part, cold-applied, gun grade polysulphide sealant for sealing vertical
movement joints in buildings, and civil engineering structures.
Size: 2.5 Litres mixed volume
Paraseal
Paraseal is a two-part, cold-applied, pouring grade polysulphide sealant for critical horizontal
joints in buildings, bridges, concrete storage tanks and similar structures and is resistant to
environmental pollution, weathering and immersion.
Size: 5 Litres
Sealants, Joint Fillers & Chemicals 119
Servijoint One
Servijoint One is a cold-applied, one-part polyurethane sealant developed for critical joints in
reservoirs containing potable water and is UK Water Bylaws Scheme listed. Servijoint One provides
a durable, damage resistant surface sealant to protect steel reinforcement in concrete structures
from corrosion. Servijoint One is also suitable for factory floors, culverts, spillways and car park
decks.
Size: 310ml
Servijoint Two
Servijoint Two is a chemically curing, pitch free polyurethane sealant specially formulated to
provide a durable seal in movement or construction joints in concrete subject to contamination
by oil and fuel spillage. It can be used in concrete roads, hard standings, runways, petrol filling
stations and industrial production areas.
Size: 5 Litres
Gripfill
High performonce, multi-purpose, gap filling
adhesive.
Gripfill is a solvent-borne, filled rubber resin
adhesive, developed to bond virtually any rigid
materials together, regardless of the evenness
of the surface.
Size: 310ml cartridges.
Everbuild Pinkgrip
Pinkgrip is a revolutionary new direct bond
cartridge applied adhesive formulated
specifically for professional use, using polymers
at the leading edge of adhesive technology.
Pinkgrip bonds to virtually all common building
surfaces and is designed for both external and
internal use.
Size: 350ml cartridges.
120 Sealants, Joint Fillers & Chemicals
Sikaflex Pro 2HP
High performance one-part polyurethane joint sealant, available in a range of colours. Sealing
expansion joints in all types of structures which are subject to movement.
Sizes: 310ml, 600ml
Sikaflex Tank N
Sikaflex Tank N is a one-part, moisture curing,
elastic joint sealant based on polyurethane.
It is used in areas for the storage, filling and
handling of water polluting liquids.
Size: 600ml
Sikaflex
Type Size Coverage
Sikaflex Pro 2HP 310ml Cartridge 12 x 12mm joints: approx 2.1m
600ml Sausage 12 x 12mm joints: approx 4m
Sikaflex 1-Cure Pro 600ml Sausage
Sikaflex 1-Cure 11FC 310ml Cartridge 3mm bead: approx 45m
600ml Sausage
Sikaflex Construction 1-Cure 600ml Sausage
Sika Foams
SikaBoom S
A general purpose expanding polyurethane foam in a can used for fixing and filling gaps in many
applications.
SikaBoom N+
A B2 rated fire resistant expanding polyurethane foam in a can.
Type Size Coverage
SikaBoom S 750ml 34 litres of expanded foam*
SikaBoom N+ 750ml 44 litres of expanded foam*
Sikadur-Combiflex
The Sikadur-Combiflex Jointing System
consists of a Sika Hypalon Strip and Sikadur
31 DWI/Rapid epoxy resin adhesive. Combiflex
Hypalon Sheet is a highly elastic, rot-proof
and chemically resistant sealing sheet with a
thickness of 1mm or 2mm. Sikadur 31DWI/
Rapid adhesive is epoxy resin based and
establishes a strong bond to the substrate. The
system resists water pressure and can be used
on wide joints without the need to remove any
existing failed sealant. It is suitable for potable
water and has high joint movement capacity.
The hypalon strip is activated by the use of Sika
Thinners C being wiped on both sides. Thinners
C is also used to remove any uncured resin
from tools, etc.
122 Sealants, Joint Fillers & Chemicals
Sikadur-31GB Rapid
Sikadur-31 Rapid is a solvent-free, moisture
tolerant, thixotropic, structural two part
adhesive and repair mortar, based on epoxy
resins and special fillers, designed for use at
temperatures between +5C and +20C.
Only DWI approved when Sika Dur-Combiflex
and SikaDur 31 GB Rapid are used together
as specified. *SikaDur 31 GB Rapid per linear
metre of Combiflex (using 100mm wide
Combiflex).
*SikaDur 31 GB Rapid per linear metre of
Combiflex (using 100m wide Combiflex).
Type Thickness Size Coverage/Length
SikaDur Combiflex 1 thick 100, 200mm 25m
2 thick 100, 200mm 20m
SikaDur 31GB Rapid 1.2kg, 6kg 0.5kg*
Sika Primer 3N
For Sika Flex Pro 2HP, PRO 3WF, 11FC.
Coverage: Average 150-250g/m2 depending on
substrate
Size: 250ml, 1 litre
Thoroflex 200
Thoroflex 200 is a Hypalon based, pre-formed membrane system for waterproofing over joints or
cracks where a high degree of movement is expected in both vertical and horizontal applications.
The material is suitable for use on a number of different substrates including concrete, brick, block
and metals.
Type Size Thickness
Thoroflex 200 100, 200mm x 20m rolls 1
100, 200mm x 15m length 2
Slip Membrane
Heavy duty slip membrane comprises of a tough, dense sheet of specially formulated
polyethylene having a very low friction surface.
Uses: heavy duty slip membrane is designed for use in sliding Joints in reinforced concrete
structures where load bearing characteristics are present, and low friction resistance is required.
The strip is used in two layers to form a load bearing, low friction sliding joint.
Slip Membrane
Size Roll Size
150mm 25m
300mm 25m
Adhesive
High quality adhesive for bonding filler boards, polystyrene, insulation and protection boards to
a wide range of surfaces. 5 litre cans.
Denso Tape
Ideal for protection against the corrosion of
pipe work, metal surfaces and cable below
ground or under water. Also for the temporary
sealing of fractured mains and cable joints.
Size: 50, 75, 100mm x 10m
Denso Paste
A primer for Denso Tape and a rust preventative
for exposed metal.
Size: 2.5kg tubs
Denso Mastic
A mastic for all sealing, filling and caulking purposes.
Size: 3kg
124 Sealants, Joint Fillers & Chemicals
Vitaseal Expanding Foam Tapes
Vitaseal expanding foam tapes are Characteristics/Applications include:
manufactured using an open cell polyurethane Responds continually to expansion and
foam heavily impregnated with acrylics. contraction cycles without failure
When the impregnated foam is compressed, Remains flexible for the duration of its life
the cells close and at only 20% compression
provide a complete primary weather seal. The Forms a complete primary weather seal
importance of a breathable and weatherproof Joints for portable or sectional buildings
seal is essential in view of the new proposals Construction
in Part L of the Building Regulations -
Conservation of Fuel & Power in dwellings. Side/end laps on roofing sheets
Vitaseal foam tapes offer a highly effective seal Expansion joints
whilst allowing the structure to breathe at the Perimeter seals for windows and doors
same time. Gutter seals
The unique cell structure and impregnation Abutment seals for conservatories
of the foam allows moisture to evaporate
externally and prevents warm air escaping in Perimeter seals for curtain walling
this way, whilst not affecting the insulation Sealing roof lights
properties required under Part L. Ductwork
Vitaseal is available as 300kPa (Vitaseal 300)
and 600kPa (Vitaseal 600). Both tapes provide
excellent sealing properties against weather.
The 600kPa product is recommended for use
in more extreme weather applications and is
resistant to UV. The 300kPa product is more
suitable for partial weather exposure.
Vitaseal expanding foam tapes are used
extensively in roofing, glazing and general
building and construction applications as a
primary weather seal. The expanding foam
tapes are used to seal uneven gaps between a
variety of structures and surfaces.
Sealants, Joint Fillers & Chemicals 125
Vitaseal Expanding Foam Tapes
Expanded thickness Length of roll
(300kPa) (600kPa)
5mm 15m 15m
9mm 10m 12.5m
13mm 8m 10m
17mm 5m 8m
26mm 4.5m 5.6m
35mm 4.5m 4.3m
44mm 3m 3.3m
53mm 3m 3m
*Please note this product is supplied from factory
where all thicknesses are available
ex-stock except Vitaseal 600 17-53mm.
Silicone Sealant FR
A one-component low-modulus neutral cure
silicone sealant. Can be used externally and
internally. Excellent resistance to fire.
Colour: White, Brown, Grey
Size: 310ml
126 Sealants, Joint Fillers & Chemicals
Spit B1 Fire Rated Expanding PU Foam
Single-component, multi-use, rapid curing B1
expanding polyurethane foam. Fire rated to
EN1366 for up to 240 minutes by Warrington
Fire Institute. For use in sealing, filling,
insulating and providing fire resistance.
Size: 750ml
Applications
Fire and smoke sealing of partition walls and
windows.
Sealing of fire doors that require specific
approved fire resistance.
Depth Width(mm)
3mm 4mm 6mm 8mm 10mm 12mm 15mm 20mm 30mm
4mm 25 18 13 10 7 6 5 3.5 2.5
5mm 20 15 10 7 6 5 4 3 2
6mm 17 13 8 6 5 4 3.25 2.25 1.5
8mm 13 10 6 5 4 3 2.5 1.75 1.25
10mm 10 8 5 4 3 2 2 1.5 1
15mm 6.5 5 3.25 2.5 2 1.5 1.25 1 0.5
Accessories
Promaseal Fire Barrier, Compound, Pillows, Foam, Expansion Joint Strip, Unicollar and Pipe Wrap.
Flamex One
Flamex One is an intumescent sealant used
for low movement joint sealing and gap filling
applications such as door and window frames.
Size: 380ml cartridge
Sealants, Joint Fillers & Chemicals 127
Flamex Two
Flamex Two is a polysulphide intumescent
sealant suitable for expansion joints in building
superstructures and may be used in both
internal and external joints.
Size: 2.5 Litres
Flamex S
Flamex S is a fire rated silicone sealant which
cures quickly and gives excellent adhesion
to most building materials. It is suitable for
the fire protection of curtain walling, building
facades, expansion joints and penetration
seals, where pipes and cables pass through fire
rated structures. Flamex S is heavily used in the
protection of stadia terracing.
Size: 380ml cartridge
Sika Firestop
A one-component intumescent fire proof sealant.
Size: 310ml cartridge
Sika Firesil-N
A one-part neutral curing, flame retardant silicone sealant suitable for indoor and outdoor
applications.
Size: 300ml cartridge
128 Sealants, Joint Fillers & Chemicals
Formwork Chemicals
Adofill
Formwork Patch Repair Compound Sizes: 1.4kg, 6kg (other sizes available on
A rapid curing, stainable, two-part unsaturated request)
polyester, resin based wood filler designed to Colours: White, Dark Oak, Black (other colours
give superior performance and longevity. This available on request)
non-sag, repair filler is ideal for larger repairs
to damaged or rot affected timber and is
particularly suitable for structural overhead
repairs when suitable plastic shuttering is
used. It is easy to model and shape upon initial
setting. Specifically developed to enable repairs
to be carried out within one hour
Characteristics/Advantages
Ideal for large overhead repairs
Excellent longevity
Excellent modelling properties
Excellent adhesion
Can be used for structural repairs
High strength and super tough
Fast Curing
Easy sanding and accepts most spirit based
wood stains
Suitable for internal and external applications
Adostrip
A high quality non-staining release mould oil
for use on all types of shuttering and formwork.
(BCA Category 2)
It incorporates active ingredients which allows
forms to remain in place longer than traditional
Mould Oils. Gives a lighter and more uniform
colour of struck concrete.
High coverage per litre.
Usage rate: Approximately 15-30m2 per litre.
Available in 5, 25 and 210 litre sizes.
Sealants, Joint Fillers & Chemicals 129
Adostrike
Concrete Mould Oil (BCA Category 5 )
Adostrike is high quality mould oil for general
site and precast yard use that achieves a top
quality concrete finish in most situations.
Release is achieved by the oil forming a
physical barrier between the formwork surface
and the concrete. Surfactants help to eliminate
blowholes and provide a clean, uniform and
non-stained surface.
Facilitates easy formwork release
Provides uniform stain-free concrete surfaces
of high quality
Minimises incidence of surface air voids
Reduces form cleaning to a minimum
Highly resistant to removal by rain showers or
foot traffic
High coverage rate provides economic usage
Suitable for use on all types of formwork in all
climatic conditions
Easy application by spray, brush or swab
Suitable for use on sealed or unsealed timber
formwork
Forms may be stripped early as other factors
permit
Ideal for achieving release from multi-planed
features e.g. trapezoidal ribs, cone shaped
column heads, etc
Suitable for use with white or standard OPC
concrete finishes
Fully compatible with the subsequent
application of silicone or similar surface
treatments when used as recommended.
Low odour and Low Hazard
Colour free
Sizes: 5, 20, 25, 205 Litres
Usage Rate: 30-40m2 per litre
130 Sealants, Joint Fillers & Chemicals
Safetard Liquid
Water Based Surface Retarder for
Application to Concrete Top Face
Safetard Liquid is a light brown aqueous
solution of penetrating and retarding agents.
Advantages
Easily applied by brush to all formwork types
Weather resistant
Single coat application
Concrete can be applied immediately or later
Non-staining
Water based with no flammable or toxic
constituents
Any residue on formwork is easily removed
Can be used on vertical surfaces
No VOC
Sizes: 5, 20, 25, 205 Litres
Usage Rate: 30-40m2 per litre
Sealants, Joint Fillers & Chemicals 131
Safetard Gel
Water Based Surface Retarder for
Application to Formwork
A transparent, gel type composition colour
tinted to assist application. Safetard Gel
has been formulated to retard the set of
fresh concrete that comes into contact with
it. It is ideally suited to the production of
exposed aggregate finishes or keyed surfaces
for construction joints or for subsequent
application of plasters or renders. It is coloured
to give a visual indication of where it has been
applied.
Advantages
Easily applied by brush to all formwork types
Weather resistant
Single coat application
Concrete can be applied immediately or later
Non-staining
Water based with no flammable or toxic
constituents
Any residue on formwork is easily removed
No VOC
Bio-gradable
Sizes: 5, 25 Litres
Usage rate: 3-4m2 per litre
132 Sealants, Joint Fillers & Chemicals
Adoseal
Plastic Formwork Coating
Adoseal is a low viscosity, high solids, single
pack moisture curing polyurethane which,
being of lower vapour pressure than most
similar materials, is an easier material for
operatives to use.
Adoseal also includes wetting agents which
enable it to achieve excellent penetrating
properties without a reduction in solids content,
in order to bind-in and toughen timber fibres
and to give anchorage in depth to the surface
coating to provide maximum adhesion. It is
also for use with all types of timber formwork
and on many other porous and semi-porous
types of materials used for concrete forming.
Advantages
Tough penetrating flexible sealing coat,
increases formwork life considerably
Improves concrete appearance by eliminating
moisture absorption of timber and preventing
migration of wood sugars into concrete
Improves formwork release, particularly where
difficult features are involved
Reduces formwork cleaning and maintenance
time
Suitable for use with all types of concrete
release agents
Sizes: 1, 5, 25 Litres
Coverage: 7-9m2 per litre
Sealants, Joint Fillers & Chemicals 133
Adolease
Chemical release agent (BCA Category 2)
Adolease is a release agent that is designed
for general site use to achieve easy formwork
release. It is a blend of reactive oils in a partially
evaporative rapid drying hydrocarbon carrier.
The carrier dries to form a positive barrier
coating on the form face. This leaves the
reactive materials, that subsequently combine
with alkalis in the concrete to form soaps at
the interface of the formwork barrier coating
and the concrete. This double action not only
facilitates easy formwork release and first class
concrete finish, but also maintains a degree of
formwork cleanliness beyond that generally
obtained by other release agents.
Advantages
Double action provides physical barrier and
chemical release properties
Facilitates maximum re-usage of all types of
formwork
Provides uniform, stain-free concrete surfaces
Minimises incidence of surface air voids
Will not impair the bond of any subsequent
treatments to concrete
Concrete deposits on forms virtually
eliminated
Dries rapidly on forms to provide cleaner and
safer working surfaces
Will not be removed by rain showers or foot
traffic
Inhibits rust formation on steel forms
Light spray mist coat application provides
extremely economic usage
Suitable for use on all types of formwork in all
climatic conditions
Minimises discolouration of concrete surface
Sizes: 5, 20, 25, 205 Litres
Coverage: 30-40m2 per litre
134 Sealants, Joint Fillers & Chemicals
Safelease
Environmentally Friendly Formwork
Release Agent
Safelease has been developed using the latest
water soluble polymer technology to produce
an environmentally friendly and highly efficient
release material for concrete formwork on
site. Safelease is ready to use and particularly
suited to outdoor use on faced, sealed plywood,
steel moulds and other impervious formwork
materials.
Advantages
Recommended for high quality finishes
Low to no odour
Safe, environmentally friendly product
No VOC content
Low viscosity for easy application
Readily biodegradable
After water evaporation, film is resistant to
water wash off
Forms may be stripped early when other
factors permit
Suitable for use with white, coloured or
standard OPC concrete finishes.
Non-staining
Fully compatible with the subsequent
application of silicone or similar surface
treatments when used as recommended
Sizes: 5, 20, 25, 205 Litres
Coverage: 30-50m2 per litre
Adofoam
Formwork joint sealing strip
Size Roll size
12 x 6mm 12m
12 x 25mm 12m
Sealants, Joint Fillers & Chemicals 135
Sealants, Joint Fillers & Chemicals 137
Adocure Sealer
A clear acrylic polymer resin solution, primarily
for application to surfaces of freshly laid
concrete where it has a double function.
The first is to form a highly effective curing
membrane that conforms to ASTM. C309, and
the second is to act as an in-depth sealer for
the hardened concrete rendering its surface
dustproof and extremely hard wearing. Its
secondary function and benefits are also
applicable when the material is applied to
existing concrete surfaces.
Benefits
Cures and seals in one operation saving time
and labour
Ideal for use in fast track construction
Curing efficiency 75% in accordance with
ASTM. C390
Provides abrasive resistant hard wearing
easy-clean surface
Effective anti-carbonation coating
Permits bond of most subsequent coatings
intended for concrete
Adocure Sealer PF
Available in PF grade for Power Floated floors.
Adocure WWT
Fugitive dye is added to Adocure WW to aid
visual identification of areas of application.
Sizes: 5, 20, 25, 210 Litres
Sealants, Joint Fillers & Chemicals 139
Adocure Standard
Resin based curing compound of 75%
efficiency. Solution of inert resins in evaporative
solvents for use in general construction
projects.
Sizes: 5, 20, 25, 210 Litres
Adocure Super
Resin based curing compound of 90%
efficiency. Complies with Clause 1027 of
the Department of Transports specification
for Highway Works. It is similar to Adocure
Standard but with a higher curing efficiency.
WBS listed for drinking water projects.
Sizes: 5, 20, 25, 210 Litres
Adocure Super AL
Aluminised for use in strong sunlight conditions
and where DTp stipulate aluminised for
highways, bridges, runways, etc.
Sizes: 5, 20, 25, 210 Litres
140 Sealants, Joint Fillers & Chemicals
Ronafloor Concrete Dustproofer
RonaFloor Concrete Dustproofer is a liquid
surface hardener and dustproofer for the
treatment of new and old concrete floors. It
reduces dusting and wear and enhances the
performance of the floor surface.
Coverage: 30m2/Litre
Sizes: 16.5, 205 Litres
Fosroc Concure WB
Concure WB is a water based concrete curing
compound based on a low viscosity wax
emulsion. It is supplied as a white emulsion
which forms a clear film on drying.
Sizes: 20 Litres, 200 Litres
Usage: 3.5-5m2/litres
Sikafloor CureHard 24
One-component silicate based hardener,
dustproofer and curing liquid.
Sizes: 25 Litres, 200 Litres
Coverage rate: 4-7m2 per litre
Sikafloor CureHard WW
Sikafloor Curehard WW is a one-part, sodium
silicate based clear liquid for curing fresh
concrete.
Sizes: 25 Litres, 200 Litres
Coverage rate: 4-7m2 per litre
Sikafloor ProSeal
One-component high performance curing,
sealing and hardening liquid the original.
The original and the best.
Sizes: 25 Litres, 200 Litres
Coverage rate: 5-10m2 per litre
142 Sealants, Joint Fillers & Chemicals
Sikafloor ProSeal 90
One-component higher efficiency curing,
sealing and hardening liquid.
Sizes: 25 Litres, 200 Litres
Coverage rate: 5-10m2 per litre
Sikafloor ProSeal W
One-component high efficiency curing, sealing
and hardening liquid, water based.
Sizes: 25 Litres, 200 Litres
Coverage rate: 5-10m2 per litre
Sika Hardeners
Type Size Coverage Cleaner
Sikafloor CureHard 24 25, 200 litres 10m2/litre Water
Sikafloor Curehard WW 25, 200 litres 10m /litre
2
Water
Sikafloor ProSeal Pro 25, 200 litres 10m2/litre Thinner C
Sikafloor ProSeal 25, 200 litres 10m /litre
2
Thinner C
Sikafloor ProSeal 90 25, 200 litres 10m2/litre Thinner C
Brick & Concrete Cleaning Material
Adoclean
A specially selected blend of inorganic acids for
the removal of cementitious contaminations
and efflorescence from brickwork. Also for
removal of rust staining from concrete.
The cleaner can be further diluted depending
upon application. In all cases of staining the
cause should be identified.
Sizes: 5 Litres, 25 Litres
Application Instructions:
To remove stains or mortar, thoroughly saturate
the area with water. Apply by brush a 50/50
solution of Adoclean and water, scrub lightly
with a hard brush followed by rinsing off with
water. Heavy mortar deposits may require
repeated applications of Adoclean whilst lightly
wire brushing and rinsing with water.
144 Sealants, Joint Fillers & Chemicals
Concrete Remover
Cure Chemicals Concrete Remover is designed exclusively to clean concrete construction
equipment and does not contain any Muriatic, Phosphoric or Citric acids and is therefore
non-corrosive. It is safe to use on painted surfaces, aluminium, glass and rubber. It is safe for
both human handling and for the environment. Cure Chemicals Concrete Remover is biologically
degradable and can be discarded in the normal sewage system (EAK 17 09 04).
How it works:
Cure Chemicals Concrete Remover contains active substances that break down the molecules that
bind the cement together with sand and water.
Cure Chemicals Concrete Remover is mixed with water to the desired strength and applied as a
foam to the item concerned, using for example, a handheld foamer. The foam should be left to
act on the concrete for 20-45 minutes. Then clean off the item thoroughly with a high-pressure
cleaner or with water and a stiff brush. In cases where there is heavy buildup, the treatment can
be repeated. Since the product is not harmful to the environment, it can be drained directly into
the public sewer system (EWC 17 09 04).
Collectively these extra benefits make for optimum utilisation of time and equipment. It is
financially sound, saving you money as well as preserving your equipment and extending its life.
You can use Cure Chemicals Concrete Remover on hand tools, mixers, scaffolding and aluminium
sections.
Sizes: 5 Litres, 20 Litres
Sealants, Joint Fillers & Chemicals 145
Knapsack 14 litre
Limelite
Waterproofing 147
Waterproofing Membranes
Proofex Waterproof Membranes
Proofex 3000
Proofex 3000 is a high performance
self-adhesive membrane for a range of
waterproofing applications including
basements and substructures. Proofex 3000
provides a vapour and waterproof membrane
to water excluding structures and protects
concrete from attack by aggressive ground
salts.
Proofex 3000MR
A high performance self adhesive membrane
for resisting methane, radon and CO2, and
preventing water entering buildings. Proofex
3000MR also provides a vapour and waterproof
membrane to water excluding structures and
protects concrete from attack by aggressive
ground salts.
Type Size Roll Area Edge Laps (mm) End Laps (mm)
Proofex 3000 1m x 20m 20m 2
50 min 150 min
Proofex 3000MR 1m x 20m 20m2 50 min 150 min
Proofex Primer 5 Litres, 25 Litres
Type Thickness Width Length Edge Laps End Lengths Weight
Proofex 4-5mm 1.27m 30m 68mm Butt jointed 58kg
Engage
Proofex 1.5mm 0.2m 10m
Engage Detail
Strip
Proofex LM 3.3-6.7mm 28kg
Proofex LM Nominal 100 50m
Mesh
Type Size
Proofex Cavity Drain 80 2m x 3m
Proofex Cavity Drain 200 2m x 20m
Proofex Cavity fixings 100 Pack
Proofex Detail strip 200mm x 10m
Waterproofing 149
Proofex Sheetdrain
A geocomposite HDPE drainage sheet with
thermobonded polypropylene filter.
Thickness Roll Width Roll Length
8mm 2m 20m
10mm 2m 12.5m
Proofex Hydromat
Proofex Hydromat is a bentonite waterproofing
membrane with unique surface bentonite
impregnation for impermeable lap joints.
Roll Size Roll Weight Thickness
1.2 x 2.42m 18kg 7mm dry
Hydromat Powder
To ensure watertight continuity during detailing work and for sealing around awkward geometrical
shapes, it may be necessary to cover an area with loose natural sodium bentonite powder.
Size: 25kg
150 Waterproofing
Famguard GS100
Famguard GS100 is a bridge deck
waterproofing membrane. It is a hot-applied
pour and roll sheet system for use on podia,
hard standings and local authority bridges.
Type Size Thickness Weight Laps
Famguard GS100* 1 x 8m 3mm 38kg Side lap: 100mm
Waterproofing 151
Proofex LM
Two-component bituminous liquid membrane
for waterproofing of underground structures
and intricate details in conjunction with Proofex
waterproofing systems.
Size (kg) Thickness Coverage
28kg 3.3mm 4kg/m
4.0mm 5kg/m
6.7mm 8kg/m
Proofex LM Mesh
A reinforcing mesh used in conjunction with
Proofex LM for areas of extreme loading
(cavings, edges and pipe penetrations).
Waterproofing 153
Bituthene MRX
Methane, CO2, and Radon resistant grade of Bituthene. Suitable for dry surface applications only.
Size: 1 x 20m
Bituthene 2000
For use below screeds as a vapour barrier.
Suitable for dry surface applications only.
Size: 1 x 25m
Bituthene GP
For basements and substructures. Externally
applied waterproofing membrane for CO2, and
radon gas protection. Suitable for dry surface
applications only.
Size: 1 x 25m
154 Waterproofing
Bituthene 4000
For basements and substructures. Externally
applied waterproofing membrane for C02 and
radon gas protection. Suitable for application to
damp surfaces and green concrete.
Size: 1 x 20m
Bituthene 8000
A superior performance externally applied
waterproofing membrane for basements
and substructures. 70m hydrostatic pressure
resistance with ultra low moisture transmission
rate. Methane, CO2 and radon gas protection.
Suitable for application to damp surfaces and
green concrete.
Size: 1 x 20m
Type Roll Size Primer Temp Range
Bithulthene MRX 1 x 20m (20m) B1 +5 to +35C
Bithulthene 2000 1 x 25m (25m) B1 +4 to +35C
Bithulthene GP 1 x 25m (25m) B1 +4 to +35C
Bithulthene 4000 1 x 20m (20m) S2 -10 to +35C
Waterproofing 155
Type Size
Primer B1 - dry surface application only 5, 25 litres (Approx 10m/litre)
Type Size
Bituthene Protection Board 3mm x 0.9 x 2.03m
Servipak Protection Board 3, 6, 12mm x 1m x 1.5m
Bitustik 4000 (adhere board to Bituthene) 150mm x 12m rolls
Preprufe 800PA
Self-adhesive Preprufe membrane for
basement walls in open excavations.
Preprufe 800PA is a cold-applied, self-adhesive
waterproofing membrane, composed of a
reinforced cross-laminated HDPE film, and a
synthetic non-bituminous adhesive. Preprufe
800PA incorporates the Preprufe Advanced
Bond Technology.
Type Size Weight Minimum overlap
Preprufe 800PA
1.2m x 35mm roll 35kg/roll 50mm
Store upright in dry conditions below +30C
158 Waterproofing
Preprufe Plus
Preprufe Plus waterproof membranes are
composite sheets comprising a robust HPDE
backing, a pressure sensitive adhesive and a
trafficable weather resistant coating with dual
adhesive dual laps for added security.
Grace has combined its proven Advanced Bond
Technology together with more than 20 years
of major project experience to produce its
highest performing waterproofing membrane
with even more practical and economic
benefits.
Excellent waste management - No release
Liner - expedites installation and reduces
construction site waste (99% recyclable)
Dual laps - Dual adhesive watertight
laps - easy to execute year round even in
harsh conditions
Faster installation liner free, kick out roll
reduces installation time, labour and cost
Type Thickness Roll Size Roll Area Roll Weights
160R 0.8mm 1.2 x 35m 42m 2
42kg
Preprufe Tape LT
For sealing overlaps at Preprufe roll ends and
cut ends.
Type Thickness Roll Size Roll Weight
Creep resistant drainage sheets are prefabricated geocomposites comprising studded polystyrene
drainage cores covered with polypropylene filter fabric. They provide cost effective alternatives to
traditional aggregate drainage. To be used in conjunction with Grace waterproofing membranes.
Hydroduct 200
Polypropylene spun bonded filter fabric on
one face of a 11mm studded drainage core.
Applied to walls of basements that have been
waterproofed with Bituthene membranes and
protected with Bituthene Protection Boards.
Size: 1.25 x 32m
160 Waterproofing
Hydroduct 220
Polypropylene spun bonded filter fabric on
one face of a 11mm studded drainage core
with a bonded plastic film on the other.
Applied to walls of basements that have been
waterproofed with Bituthene membranes.
Also applied to existing basement walls and
permanent shuttering prior to the application
of Preprufe membranes.
Size: 1.25 x 32m
Hydroduct CF20
Forming drained cavities horizontally and
vertically.
Size: 2 x 20m
Hydroduct CF08
Used for drained cavities vertically in lower risk applications.
Size: 2 x 20m
Type Description Size
HYD-CF20 Hydroduct CF 20 2 x 20m
HYD-CF08 Hydroduct CF 08 2 x 20m
SERV-TAPE Servitape 4000 50mm x 12m
HYD-STRIP Hydroduct Strip 4000 150mm x 20m
Hydroduct Waterproofing Ancillaries
Type Roll Size
Cut fasteners (jointing) Strip 8 x 4 dimples, 5 supplied per roll
Bitutstick 4000 (jointing) 150mm x 12m long
Bitutstick 4000 (jointing) 70mm x 20m long
Hydroduct Tape 150mm x 20m
Coil End Outlet 150mm
Coil Straight Connector 150mm
162 Waterproofing
Sheetseal Waterproofing Membranes
Sheetseal
Sheetseal is a cold applied, self adhesive
bitumen sheet waterproofing membrane. It is
typically used as an external basement tanking
system or ground floor DPM, particularly
where large unobstructed areas are to be
waterproofed.
Type Thickness Size Weight
226 1.6mm 1050mm x 19.05 1.7kg/m2
226 1.6mm 300mm x 20m 1.7kg/m2
Waterproofing 163
Adhesive Tape
Adhesive Tape is a double-sided tape, designed to be used in conjunction with the Bitumen
Protection Board to adhere it to dry surfaces of bituminous type membranes. It may be used
in pads 150mm square, or in strips of suitable length. It can also be used to adhere to other
materials, such as polyethylene sheets or similar, to most dried RIW membranes.
Type Size Weight
Double Drain 8mm x 2m x 15m 0.58kg/m2
Top Edging Strip 2m Strips
X Cramps 60/Bag
RIW X Cramps
A fixing aid for locating and mechanically securing the system to the substrate.
Size: Bags of 60
164 Waterproofing
Plaster Drain Waterproofing Membranes
Plaster Drain
Plaster Drain is an internal drainage system
manufactured from clear high density
polyethylene with 5mm undercut studs in a
dovetail shape which forms the key for plaster
and render finishes in above and below ground
situations.
Type Size Weight Overall Thickness
Plaster Drain 0.5mm x 2m x 20m 0.48kg/m2 5mm
Plaster Drain Overtape 2.5m Roll
Waterproofing 165
Cavity Drain Waterproofing Membranes
RIW Cavity Drain
Cavity Drain is an internal tanking drainage
system used to collect water entering the
basements and sub-structures and channel it
to a sump or collection point for disposal. P20
is used mainly on floors but can also be used
for walls. P5 is used only for walls.
Waterproofing 167
Channel Outlet
The channel outlet consists of a 90 PVC bend and a PVC male coupling which is fitted to the base
of the Aqua channel to allow water to be taken from the channel to the water collection point, i.e.
sump and pump.
168 Waterproofing
Channel End Outlet
Where gravity fed drainage is to be used, the
channel end outlet has been designed to
convert the pentagonal shape of the Aqua
channel into a round aperture.
Cleaning Ports
Cleaning ports ( jetting eyes) should be
incorporated into the Aqua Channel and can be
inserted at any point along its length, to allow
for periodic cleaning of the drainage system.
Waterproofing 169
170 Waterproofing
IKO Waterproofing Ancillaries
IKOpro SA Bitumen Primer
A rubber-modified bituminous priming solution
designed to seal and prepare surfaces for the
application of selfadhesive damp proofing
or tanking membranes. It is fastdrying and is
ideal for ensuring a long-term bond between
the surface and subsequent membranes being
applied. It may be applied to many substrates
including concrete, wood, brickwork, blockwork
and metal.
Size: 5, 25 Litres
Product Size Thickness Coverage
IKOpro SA Bitumen Primer 5, 25 Litres Concrete 3-4, metal 10-15m2/litre
IKOpro Quick Dry Primer 5, 25 Litres Concrete 3-4, metal 10-15m2/litre
Bitusheet Waterproofing Ancillaries
SBS Protection Board
Used in conjunction with sheet membrane and liquid membrane tanking systems.
Size: 2 x 1 metre bitumous board
Bitusheet XL Tape
Used as an overband tape for the sealing of membranes to membranes.
Size: 100mm x 20m
172 Waterproofing
Fixing Strip
3 metre long (galvanised), holes punched every 300mm.
Bitusheet Waterproofing Ancillaries
Type Size Roll Width Coverage
SBS Protection Board 2m x 1m
Reinforcing (XL) Tape 20m Roll 100, 150, 200, 300mm
Double Sided Tape 15m Roll 50, 75, 100, 150mm
Bitusheet XL Tape 20m Roll 100mm
Fixing Strip 3m
Slabdrain
Slabdrain is a cavity drain former manufactured from a dimpled HDPE, designed to provide a
drainage channel beneath the concrete in floor and wall construction. The former is provided with
self adhesive edges to enable joints to be sealed to give a water and gas tight membrane.
Size: 1 x 50m
Type Size Thickness Quantity
Walldrain 1m x 50m 12mm
0.9m x 50m 25mm
Slabdrain HDPE (1.00mm) 1m x 50m 20mm
Nail 37 Washer 36 150 Box
Anchor Plug 8mm x 75mm 100 Box
Washered Nails 25, 30, 40mm 500 Box
Waterproofing 173
Anchor Plug
Drill 8mm hole and set with hammer. Use mastic tape to form a washer seal under head.
Membrane Washers
For use with washered nails.
Walldrain and Slabdrain Waterproofing Ancillaries
Type Size Quantity
Soft Washer Fixing Nail 37mm, Washer 36mm 150
Anchor Plug 8 x 75mm 100
Washered Nails 25, 30, 40mm 500
w
174 Waterproofing
Bentonite Geotextile Waterproofing
Bentonite has been used by the construction industry in waterproofing
systems for more than 30 years. Naturally occurring sodium bentonite
has exceptional waterproofing qualities, with its ability to swell when
in contact with water and convert from dry clay to impervious gel.
Manufacturers have harnessed this waterproofing power by containing
sodium bentonite between two layers of geotextile, creating the ideal
system for sealing reinforced concrete structures. Can be installed in
virtually any weather condition.
Bentonite membrane forms a continuous mechanical bond to concrete.
This bond is created when the strong geotextile fibres are encapsulated
by poured concrete as shown in the illustration.
Voltex
Applications:
Under structural slabs
Sheet piling
Tunnels
Concrete walls
Soft-washer Fastener
Allows direct shot-fired application to steel
piling, sheets, concrete etc.
Type Size Pack
Voltex 1.1m x 5m Per roll
Voltex DS 1.1m x 5m Per roll
Soft Fixing Washer Box of 150
Fixing Stapler Each
Waterproofing 175
Bentoseal
Patented trowel grade sodium bentonite compound used to detail around penetrations, corner
transitions and terminations.
Volclay granules
Pure granular Volclay bentonite used dry, or as paste by adding water at detail areas requiring
additional protection.
Type Pack
Bentoseal Pail 14.25 litres
Bentoseal Cartridge 0.95 litre
Proofex Hydromat
Proofex Hydromat is a bentonite waterproofing
membrane with unique surface bentonite
impregnation for impermeable lap joints.
Roll Size Roll Weight Thickness
1.2 x 2.42m 18kg 7mm dry
Hydromat Powder
To ensure watertight continuity during detailing work and for sealing around awkward geometrical
shapes, it may be necessary to cover an area with loose natural sodium bentonite powder.
Size: 25kg
Nitoseal MS60
Suitable for sealing joints in concrete, brickwork,
blockwork, perimeter sealing around doors
and windows and non trafficked floor joints. A
one part low modulus sealant based on hybrid
modified polyether (MS) technology.
176 Waterproofing
Structureseal Waterproofing Membranes
Structureseal Waterproofing Membranes
Structureseal is waterproofing composite of
high swelling Sodium Bentonite encapsulated
between a non-woven and woven geotextile.
When confined under pressure within a
structure the swelling is controlled, forming a
dense, monolithic, impervious waterproofing
membrane.
Structureseal Waterproofing Ancillaries
Waterstop
Waterstop is an active bentonite based
waterstop that is designed to replace passive
PVC/Rubber type waterbars thereby eliminating
the requirement of special pieces and seam
welding. Waterstop is not designed for, or
intended to function as an expansion joint
sealant.
Size: 25mm x 19mm x 5m
Sealing Compound
Sealing Compound is a trowel-grade, sodium
bentonite/butyl-rubber based sealant, designed
for a variety of surface preparation and
waterproofing detail work, for use with the
RIW Structureseal system. Being a bentonite
based material, Sealing Compound swells
upon contact with water to seal against water
intrusion. With the consistency of thick grease,
Sealing Compound is easy to apply and bonds
to most materials.
Size: 14.25 Litres
Waterproofing 177
Granules
Granules are chemically treated sodium bentonite granules, which are used as a detailing
accessory product, with the RIW Structureseal system. When hydrated and in containment, the
Granules form into a dense, impermeable material, that combines with the sodium bentonite in
Structureseal to form a seamless waterproof membrane.
Size: 20kg tub
Washers
40mm hardened nail with 30mm premounted washer for securing the RIW Structurseal to
concrete by hand nailing or shot firing.
Size: Box of 500
Staple Gun
A manual stapler and staples (box of 2500) for fixing sheets of Structurseal together at laps, etc.
Structureseal Waterproofing Ancillaries
Type Size Weight Supplied as
Waterstop 25mm x 19mm 35-40kg per roll 6 x 5m long coils per box
Sealing Compound 14.25 litres 18kg
Granules 20kg tub 20kg
Washers 500 box
Staple Gun Each
Size: 19 Litres
Type Size Coverage
Mulseal DP 5, 25, 200 litre 1.1-1.4m2/litre*
Fosroc Primer 3
Metal and timber surfaces must be primed with a coat of Primer 3 before applying Mulseal DP.
Type Size
Proofex LM
Two-component bituminous liquid membrane
for waterproofing of underground structures
and intricate details in conjunction with Proofex
waterproofing systems. Yield: 7m2 at 4mm
thick.
Size Yield
Bituthene LM
Two-component elastomeric cold-applied
liquid detailing compound. For use with Grace
waterproofing membranes where liquid applied
waterproofing is necessary to ensure watertight
continuity, such as pile terminations, pipe
penetrations, internal corners and membrane
continuity through masonry walls. Bituthene
LM cures to form a tough seamless rubber-like
waterproof layer.
Size: 5.7 Litres
Type Size
Flexiseal
Flexiseal is a two colour, seamless and fully
bonded liquid applied waterproof coating
based on polyurethane technology. RIW
Flexiseal cures by drawing moisture from the
air to form a highly flexible but durable barrier
to water and water vapour and is typically used
where a high performance tanking system is
required. Available in black or grey.
Type Size Coverage
RIW Flexiseal 6, 25kg 2m2/kg/coat
Flexiseal Ancillaries
Type Size
RIW Protection Board 3mm x 0.9 x 2.02m
Heviseal
Heviseal is typically used to provide a protective
coating to concrete or steel superstructures or
other structures such as retaining walls, plinths,
etc. RIW Heviseal is suitable as a waterproof
membrane, for periodic maintenance onto an
existing flat roof area. The membrane can also
be used on parapet walls, gutters, planters,
ponds and water storage tanks. Heviseal has
excellent U.V. resistance.
Type Size Coverage
Hydrocoat
Hydrocoat is an easily applied, high-build black bitumen paint, which dries to a water and water
vapour proof finish. It may be easily applied to most building substrates.
LAC
Liquid Asphaltic Composition is typically used
as a damp proof membrane to ground floors,
as a vapour barrier behind cladding and for
tanking of basements. It is also suitable for
waterproofing foundation walls, ducts, lintels,
columns, beams and similar structures at,
above and below ground level and as a radon
barrier.
Toughseal Ancillaries
Type Size
Aggregate, Grade 1 25kg
Aggregate, Grade 2 25kg
Cleaning Solvent 5 litres
Flexiseal 6, 25kg
Waterproofing 183
Synthaprufe
Synthaprufe Original
IKOpro Synthaprufe Original is a high
performance, brush applied damp proofing
emulsion containing synthetic rubber latex
which provides a waterproof and vapour
resistant, black elastomeric membrane.
IKOpro Synthaprufe Original exhibits low odour,
with exceptional flexibility and crack resistance,
even at low temperatures and offers excellent
resistance to sulphates and other soil salts.
When suitably protected, Synthaprufe will
be effective through the life of the building.
Synthaprufe bonds with great strength to a
range of building materials.
For use as damp proofing of concrete, brick,
blockwork and masonry, with vertical surfaces
being finished with a gypsum-based plaster
system. Adhesive for unsealed wood block
flooring (min 10mm thick). Suitable for tanking
of basements.
Size: 5, 25 Litres
184 Waterproofing
Waterstops & Waterplugs
Supercast PVC Waterstops
Rearguard PVC waterstops are designed for use
in vertical and horizontal joints in both water
retaining and water excluding structures.
A range of prefabricated junctions and
intersections is available, also see generic
profiles and accessories on page 128.
Supercast Hydrofoil
Supercast Hydrofoil PVC waterstops are suitable
for use in water retaining structures. When
positioned centrally within the thickness of the
concrete components they prevent the loss of
water from within the structure and the ingress
of ground water.
Type Section Width Roll Weight Roll Length
Supercast Hydrofoil 150mm 21.3kg 15m
Supercast Hydrofoil 200mm 27.3kg 15m
Supercast Hydrofoil 250mm 27.1kg 12m
Supercast Rearguard S 200mm 24kg 12m
Supercast Rearguard S 250mm 33.4kg 12m
Supercast XHD Hydrofoil 250mm 42.9kg 10m
Waterproofing 185
Supercast Twinstop
Supercast Twinstop is a PVC waterstop
incorporating two hydrophilic elements for
use in water excluding and water retaining
structures. The hydrophilic elements provide
extra security over standard PVC profiles.
A range of prefabricated junctions and
intersections is available, also see generic
profiles and accessories on page 128.
Type Size Roll Length
Supercast 250mm 12m
Rearguard TS
Supercast 250mm 12m
Hydrofoil TS
Supercast - SW Adhesive
Supercast SW
Supercast SW is a swellable waterstop for integral sealing of construction joints in concrete cast
in-situ.
Supercast SW Adhesive is used to fix Supercast SW10 and SW20 to substrate.
Size: 380ml
186 Waterproofing
Supercast - SWX
Supercast SWX is a grey, elastomeric water-
swellable paste which is applied like a sealant.
The hydrophilic properties of Supercast SWX
display good consistency in swell rate during
repeated wet/dry cycling. Expansion of the
product on contact with water creates a positive
pressure against the faces of the concrete joint,
thus preventing the passage of water.
Size: 380ml
Type Size Coverage
Supercast SW10 5mm x 20mm x 15m rolls Usually single run of strip per joint
Supercast SW20 10mm x 20mm x 5m rolls Usually single run of strip per joint
Supercast SW Adhesive 380ml cartridge Approx 13m @ 5mm bead per cartridge
Supercast Butyl-Nek
Supercast Butyl-Nek is a rubber/bitumen pre-
formed flexible sealing strip specifically used
to provide a permanent watertight joint for
pre-cast units which are jointed together on
site. Applications include joints in manholes,
inspection chambers, box culverts and concrete
pipes. This easily compressible product is
designed to completely seal and fill the annular
space between pre-cast units regardless of
shape or size. Supercast Butyl-Nek associated
products have a 50-year proven track record in
the most extreme situations and are specified
and used by precasters and contractors
worldwide.
Type Size
Supercast Butyl-Nek 12mm x 60mm x 6m
Supercast Butyl-Nek 25mm x 40mm x 4m
Supercast Butyl-Nek Primer 5 litres
Waterproofing 187
Supercast Synkoflex
Supercast Synkoflex is a unique non-swelling,
pre-formed plastic adhesive waterstop that
bonds fast to cured concrete surfaces and fuses
with fresh concrete. Supercast Synkoflex offers
a host of practical advantages in application.
It provides watertight integrity for construction
joints in concrete structures in places where
swellable waterstops are not best suited,
such as bund walls and thin section walls
and slabs. It has exceptional adhesion and
malleability, making it an excellent choice for
steel sheet piling/floor slab joints. Supercast
Synkoflex comes with an extensive track record
of more than 30 years proven reliability on
major projects in the USA - now extending to
Scandinavia, the UK and other major European
countries.
Type Size Coverage
Supercast Synkoflex 25 x 25mm Box of 25mm x 1m strips
Supercast Synkoflex FR 12 x 30mm Box of 6mm x 5m roll
Supercast Synkoflex Primer 3.79 litres 50-60mm per can @ 50mm wide
XHD Hydrofoil
Increased web thickness gives a much stiffer
section. The stiffened profile is used where 17
large volumes of concrete are being placed. 30
They are used where concrete is being placed 250mm
from a great height such as deep wall shutters.
Supercast Section width Wt/roll Minimum Radii Roll Length
on flat on edge
XHD Hydrofoil 250mm 42.9kg 15m 0.23m 10m
188 Waterproofing
Fosroc Waterstop Ancillaries
Factory Welded Intersections
A range of factory welded intersections for
Hydrofoil
XHD Hydrofoil
Rearguard S
Jointing Jigs
Use to produce accurate square cuts in Fosroc
waterstops and to hold ends to be welded in
precise alignment.
Heater Blades
Used to weld PVC waterstops and intersections.
110v and 220v x 350w blades are available.
Non-electric blades are also available.
Adcor 500S
A conformable, swellable polymer/butyl
rubber waterstop strip for construction joints
that expands in contact with water. When
fully encapsulated by poured concrete, the
expansive forces form a seal against concrete
faces. The seal resists hydrostatic pressure,
stopping water from entering sub-structures.
Adcor is a unique product that has been
specifically developed to provide better
performance than conventional swellable
rubber waterstops.
Type Size
Adcor 500S 5m rolls. 6 rolls/carton,
30 cartons/pallet
Adcor Mastic 310ml cartridge
Adcor Adhesive MS 310ml cartridge
Adcor 500S Mesh Profile 1m strips, 30 strips/
bundle
Waterproofing 189
Serviseal
Serviseal is an externally cast passive PVC
waterstop system manufactured in a range
of sizes for the protection of expansion,
construction and contraction joints in reinforced
concrete basements and substructures.
Description Size
195mm Serviseal 10m
240mm Serviseal 7.5m
K320 Serviseal 7.5m
Servitite
Servitite is a specially formulated PVC, internally cast, heavy duty waterstop system manufactured
in a range of sizes and grades for use in reinforced concrete structures. Servitite is cast into the
centre of the concrete member where it provides resistance against high hydrostatic pressure
from both faces.
Description Size
150mm Servitite 7.5m
230mm Servitite 5m
305mm Servitite 5m
PVC Edgetie
PVC Edgetie is an internally cast passive
waterstop system manufactured in a range of
sizes for sealing joints in concrete structures
subject to water pressure. Centrally placed.
Description Size
210mm PVC - Edgetie 10m
Vertical T
Ancillaries
Type Pack
Jointing Jigs Each
110V knife Each
220V knife Each
19 x 25mm 3.9m
Waterproofing 193
Bentorub+
Bentorub+ is a green flexible hydrophilic strip made of natural bentonite clay and synthetic rubber.
It is designed for the sealing of concrete joints, cold joints and working joints in concrete, around
pipe penetrations, in sewer joints, against slurry walls and sheet piling.
Type Size Roll Size
Bentorub+ 20 x 25mm 5m
Bentorub Salt
A red flexible hydrophilic strip made of natural bentonite clay and synthetic rubber. It has the
same applications as Bentorub+ except Bentorub Salt may only be used in contact with salt and
Brackish water.
Type Size Roll Size
196 Waterproofing
Swellseal Joint
Swellseal Joint is a flexible co-extruded vulcanised strip made out of a combination of chloroprene
rubber and a hydrophilic resin.
The orange part has a swelling capacity of up to 600% in contact with water.
The black part (= compression zone) has a swelling capacity of 150%.
The ridged finish assures a better adhesion to concrete.
Advantages:
Swellseal Joint has a proven track record in concrete structures subject to high water pressure.
Reversible vulcanised rubber swelling strip in contact with water.
Will not sag when correctly placed.
Can be easily installed by nailing or glueing with Swellseal Mastic.
Has a good all-round chemical resistance and can resist to petroleum, mineral and vegetable
oils and greases.
Swellseal Joint can also be installed between smaller pre-cast elements and/or joints where one
expects smaller settlements
Type Size
Swellseal Joint 7mm x 25mm x 10m
Waterproofing 197
Swellseal 3V
Swellseal 3V is an elastic strip made out of a combination of rubber and a hydrophilic resin.
Enclosed between prefabricated concrete elements, it will expand in contact with water and in
this way seal the joint. Swellseal 3V has a swelling capacity of up to 300 times when in contact
with water.
Type F
For sealing construction joints between precast elements.
Type S
For sealing joints between precast tunnel segments.
Swellseal 3V
Can only function properly in a confined space.
The expansion of Swellseal 3V will create a certain pressure. Installation in the middle of the joint
is preferred.
Description Size
Swellseal 3V Type F 20mm x 5mm x 15m
Swellseal 3V Type F 20mm x 10mm x 10m
Swellseal 3V Type F 20mm x 20mm x 5m
Swellseal 3V Type F 27mm x 27mm x 5m
Swellseal 3V Type S 20mm x 5mm x 15m
Swellseal 3V Type S 20mm x 10mm x 5m
Swellseal Adhesive 5 litres
Swellseal Adhesive P 25 litres
Swellseal Adhesive S* 25 litres
198 Waterproofing
Swellseal 8V
Swellseal 8V is an elastic strip made out of a combination of rubber and a hydrophilic resin.
Enclosed between prefabricated concrete elements, it will expand in contact with water and in
this way seal the joint. Swellseal 8V has a swelling capacity of up to 800 times when in contact
with water.
Thanks to its high swelling capacity Swellseal 8V is extremely appropriate for applications with
polluted water, in case of higher water pressure in zones with changing water table (wet/dry
cycles).
Type F: For sealing construction joints between precast elements
Type S: For sealing joints between precast tunnel segments
Swellseal 8V can only function properly in a confined space
The expansion of Swellseal 8V will create a certain pressure. Installation in the middle of the joint
is preferred.
Description Size
Swellseal 8V Type F 20mm x 5mm x 15m
Swellseal 8V Type F 20mm x 10mm x 10m
Swellseal 8V Type F 20mm x 20mm x 5m
Swellseal 8V Type F 27mm x 27mm x 5m
Swellseal 8V Type S 20mm x 5mm x 15m
Swellseal Adhesive 5 litres
Swellseal Adhesive P 25 litres
Swellseal Adhesive S* 25 litres
Swellseal Mastic
Swellseal Mastic is a one-component, polyurethane based, solvent free, hydroswelling mastic,
supplied in cartridges and aluminium sausages, for the sealing of construction joints and around
pipe penetrations.
Swellseal Mastic cures and swells in the presence of moisture. Curing time depends on
temperature and humidity conditions, i.e. curing time will reduce if RH and C are higher. Swellseal
Mastic will become firm in 24-36 hours. Performance is not affected by the curing time.
Size
310ml Cartridges
600ml Sausages
Waterproofing 199
Bentoject
Bentoject is the combination of a hydrophilic bentonite strip and a post-injectable injection tube
into one system for the sealing of construction joints in concrete.
Bentoject is manufactured out of three layers:
A reinforced spiral of steel wire
A filtrating membrane
Bentonite rubber outer skin
Description Size
Waterstop RX 101/Revofix
Waterstop RX
Waterstop RX is a specially formulated mixture of natural sodium bentonite and butyl rubber. On
contact with water penetrating the joint, the material swells to form a tight compression seal.
Revofix RX
Revofix is an overlay mesh strip, used to hold Waterstop RX in place centrally, supplied
complete with fixing nails.
The Waterstop RX is held in place by the use of Revofix, or by using RXWB Adhesive.
Description Size
Waterstop RX
20mm x 25mm x 5m
Revofix 30m Box
Leakmaster
Leakmaster is a one-component, water-swelling elastic sealant, with excellent adherence.
Supplied in 310ml cartridges for use with standard applicator gun.
SikaSwell
Three joint sealing profiles that swell in contact with water. They are permanently water resistant,
highly elastic and pretreated to prevent premature swelling on site.
Type Width Thickness Box
2003 20mm 3mm 140m
2010H 20mm 10mm 50m
SikaSwell 2005 20mm 5mm 140m
Waterproofing 201
Sika lnjectoflex
Sika lnjectoflex System (type HP) is an
expanding, reinjectable hose for producing
waterproof construction joints.
Size: 40m
Providing watertight joints for: Grade 2, 3 and 4
basements. Underground car parks.
Water retaining structures.
Inner tube of non expanding black neoprene.
3 red external hydrophilic swelling strips.
3 yellow compressible sealing cords of foam
rubber
Thoro Waterplug
Thora Waterplug is a blend of hydraulic
cements, well graded sands and chemical
additives supplied in a dry powder form. It
requires only the addition of clean water to
produce a ready to use, ultra-rapid setting
plugging mortar.
Type Coverage
Fastfill WP
Fastfill WP is a safe and simple to use ultra-
rapid setting mortar for arresting water seepage
and infiltration under pressure through cracks,
joints and voids in concrete and masonry prior
to the application of cementitious coatings
and mortars. It is a single-component, polymer
modified, fibre reinforced mortar based on
shrinkage compensated Portland Cement,
which is non-caustic in use.
Coverage : 1kg powder will yield 0.53 Litres.
Type Size (kg) Coverage
202 Waterproofing
Renderoc Plug
Renderoc Plug is a rapid setting mortar which is
easy to apply to horizontal, vertical or overhead
surfaces at a wide range of thicknesses. There
are two grades available: Renderoc Plug 1 with
an initial set time of approximately one minute,
and Renderoc Plug 20 with an initial set time of
approximately 20 minutes. (Set times are based
on ambient/substrate temperatures of 20C).
Type Size Coverage
Renderoc Plug 1 6kg 3 litres
Vandex Plug
A cementitious ready-mixed and rapid setting
compound to plug leaks and stop water. DWI
approved for use in contact with drinking water.
Size: 15kg Resealable Bucket
FebTank Plug
A rapid setting Water Stop which, when mixed
with clean water, provides a ready to use ultra
rapid setting durable plugging compound for
active water leaks in concrete and masonry.
The material expands as it cures to form a
watertight seal with similar characteristics to
concrete. Use on holes, joints and cracks. Sets
both above and below the water level.
Size: 5kg
Cementfill WP
Cementfill WP is a single component, polymer modified, fibre reinforced, Portland cement based
plugging and sealing compound. When mixed with water it exhibits unique hydraulic properties
to produce a rapid setting mortar.
Type Size Yield Coverage
Cementitious Waterproofing
Cementfill FC
Cementfill FC is a single-component,
thixotropic, polymer modified, cement based,
waterproof fairing coat and repair mortar for
concrete and masonry.
Type Size Yield Coverage
Cementfill 20kg bag 12 litres 4m2 at 3mm
FC thickness
Cementfill HB
Cementfill HB is a single-component,
thixotropic, polymer modified, cement based,
waterproof, rapid hardening, high-build repair
mortar for concrete and masonry.
Type Size Yield Coverage
Cementfill 20kg bag 13.2 2.64m2 at 5mm
HB litres thickness
Cementflex
Cementflex is a two-component, polymer
modified, flexible, cement based, waterproof
coating for concrete and masonry.
Type Size Yield Coverage
Cementflex 15kg bag 9.4 1.6kg/mm/m2*
(2-part) litres & 4.7m2 at 2mm
thickness*
Cementseal
Cementseal is a two-component, polymer
modified, cement based, waterproof coating
for concrete and masonry.
Type Size Yield
Cementseal 15kg (2-part) 7.9 litres of slurry, sufficient to treat 4m2 at 2mm thickness
Cementseal Primer
Cementseal Primer is a multi-functional, water
based primer/curing agent, formulated on an
aqueous acrylic copolymer.
Type Size Yield
Aquatek Elastic 2C
Aquatek elastic 2C is a two-component
coating containing cement, selected silicas,
fibres, modifiers and a water-based acrylic
liquid. Aquatek Elastic 2C cures into a flexible,
waterproof coating which allows a movement
up to 0.6mm and up to 1.2mm if reinforced
with Reinforcement Mesh.
Type Size Colour
Aquatek Elastic 2C 32kg Grey
Aquatek Elastic 2C 32kg White
Aquatek Brush
Waterproofing 205
Aquatek
Aquatek super XA is a waterproofing powder product composed of Portland cement, selected
silicas, chemically reactive ingredients and modifiers. When broadcasted onto the surface,
Aquatek Super XA reacts with the moisture in the concrete and forms a waterproofing barrier
through reaction of the active chemicals with the free-lime, to form long chained insoluble
crystalline complexes which block the capillaries and micro-fissures in the concrete, stopping
water penetration even under negative water pressure.
Description Size Colour
Aquatek Super XA 25kg Grey
Application Brush
Omnitek
Omnitek RM Fiber is a cement-based powder containing selected silicas, fibres and modifiers.
When mixed with clean water Omnitek RM Fiber provides a rapid setting, polymer modified,
waterproof repair mortar.
Omnitek XL Fiber is a cement-based powder containing selected silicas, fibres and modifiers.
When mixed with clean water Omnitek XL Fiber provides a fast setting, polymer modified,
waterproof repair mortar.
Description Size Colour
Omnitek RM 25kg Grey
Aquatek Plug
Aquatek Plug & Aquatek Plug XF are powders composed out of cement, selected silicas and
modifiers. When mixed with clean water Aquatek Plug & Aquatek Plug XF provide rapid setting
plugging mortars.
Aquatek Plug has a final setting time of three minutes, Aquatec Plug XF of thirty seconds. Can be
applied even under water.
Description Size Colour
Aquatek Plug 10, 25kg Grey
Aquatek Mastic P
Aquatek Mastic P is a one-component, polyurethane sealant and adhesive which can be used as a
durable, flexible sealant or for bonding applications on most building materials.
Description Size
Aquatek Mastic 310ml
Application Gun
206 Waterproofing
Thoroseal
Thoroseal, when mixed with water or a Thoro
Acryl 60/ water blend (one part Thoro Acryl 60
to three parts water) to a lump free consistency,
provides a waterproof coating that is easily
applied by brush or spray to concrete and
masonry above and below ground level.
Type Size Coverage
Thoroseal
25kg 1st coat : 1.5kg/m2
Thoro Acryl 60
Thoro Acryl 60 is an acrylic polymer liquid ad-
ditive for cement mixes, designed to enhance
their physical characteristics, ease application
and increase wear and weather resistance.
Size: 5 Litres, 20 Litres
Thoroseal Super
When mixed with clean water Thoroseal Super
forms an extremely durable waterproof coating
for concrete and masonry. Applied with a brush
or spray. Available in white and grey and in
bags or pails. Resists both positive and negative
pressure.
Type Size Coverage
Thoroseal Super 25kg 2.5-3.5kg/m2
for two coats
Waterproofing 207
FebTank Super
WRAS approved
LABC registered
Febtank Super, when mixed with clean water,
forms an extremely durable waterproof coating
for concrete and masonry which is easily
applied by a stiff hand brush, broom or spray.
Ideal permanent waterproofing system for
basements, cellars, pools, reservoirs and below
ground level applications. Resists both negative
and positive water pressure.
Available in Grey or White
Sizes: 25kg Bag, 20kg Tub
208 Waterproofing
Cemprotec Elastic
Elastomeric grade of waterproof coating for the
treatment of cracked or crazed surfaces.
Cemprotec E-942
Epoxy modified waterproof coating for
enhancing the chemical resistance of concrete,
blockwork and brickwork. Ideally suited for dirty
water applications.
Cemprotec E-Floor
Available as a standard 2mm product or
a 3-6mm variable formulation for the
waterproofing of floor and deck areas.
Overcomes the risk of osmotic blistering on
damp substrates.
Type Size Yield Coverage
Cementitious Coating 851 30kg 16.67 litres 8.33m2/30kg @ 2mm thickness
Cemprotec Elastic 15kg, 30kg 18.8 litres 9.4m2 @ 2mm thickness
Cemprotec E-942 30kg 16.2 litres 8.1m2 @ 2mm thickness
Cemprotec E-Floor 30kg 16.2 litres 8.1m2 @ 2mm thickness
Cemprotec E-Floor HB 30kg 15 litres 5m2 @ 3mm thickness
Cemprotec EF Primer 5 litres & 25 litres 5 litres & 25 litres 3-10m2 per litre
Waterproofing 209
Nitocote CM210
Nitocote CM210 is a flexible cementitious
coating, used for waterproofing water retaining
structures and water excluding structures. It
provides a flexible waterproof coating suitable
for use in potable water tanks, reservoirs, canals
and culverts. The material can be used on
concrete, brick and blockwork substrates.
Type Size Coverage
Powder component (grey or white) 18.2kg bag 1mm-12.5m2 per pack wet film thickness: 0.54m2/kg
Liquid polymer component 5kg plastic container
Proofex LM mesh 100mm x 50m
SikaTop 121
SikaTop 121 is a two-component thin layer waterproofing, levelling and bonding mortar.
Type Size Average Coverage
SikaTop 121 25kg 2kg/m2/mm
Sika Damp Proofing Slurry 12.5, 25kg 6.5-7m2/25kg bag @ 2mm thick
210 Waterproofing
Sika 1 Pre Batched Mortars
Sika 1 Pre-Batched Mortars are blends of specially graded aggregates, sand and cements
manufactured to the correct mixing ratio, given below.
The four graded bags (Spritz, Render, Finish, and Screeding) make up the Sika 1 Pre Bagged
Tanking system.
This consists of a three-coat render for the walls and a 35mm thick floor screed. The Sika 1
additive is first diluted with clean water at a 1:10 ratio, and then mixed with each bag. Sika 1
Pre-Batched Mortars can be used in the following uses, structural waterproofing to resist water
pressure below ground, moisture and dampness above ground level and internal waterproof
tanking. This system has been BBA Certified, Certificate no. 00/3761.
Type Gauging Liquid Size Coverage
Spritz & Bonding Coat Mortar 5.7 litres 25kg 2m2 @ 6mm per bag
Render Mortar 3.3 litres 25kg 2m2 @ 6mm per bag
Finishing Mortar 3.3 litres 25kg 2m2 @ 6mm per bag
Vandex BB 75
Vandex BB 75 is a cementitious, ready-for-use
( just add water), efflorescence-free surface
waterproofer with hydrophobic properties,
resistant to water and moisture.
BBA approved (certificate no. 90/2516) and
approved for use in contact with drinking water
Type Size Coverage
Vandex BB 75 E
Vandex BB 75 E is a cementitious
two-component polymermodified and
efflorescence-free surface waterproofer with
hydrophobic properties, resistant to water
and moisture. Made of Vandex BB 75 as a dry
component and Vandex Elasticizer PK 75 as a
liquid component, which provides elasticity and
crack bridging properties.
Type Size Coverage
Vandex BB 75 25kg 6kg/m2/3mm
(dry component)
Super White
Limelite
Limelite Plasters
Modern gypsum based plasters should not
be used in connection with cementitious
waterproofing products. Limelite Renovating
plaster and Tarmac High Impact Finishing
Plaster have been formulated to compliment
cementitious waterproofing systems.
212 Waterproofing
Limelite
Limelite
Type Size Coverage
Limelite Renovating Plaster 25kg 3m2 @ 11mm/bag
Sika 2, 4 & 4A
Sika 2, 4 & 4A are all purpose waterproofing liquids with various setting
times and/or waterproofing properties. Setting time dependent on
concentration.
Sika 2
Sika-Plug, is Sikas fastest setting point leak
plugging product when used neat, for point leak
plugging where high water ingress is present.
Sika 4
Accelerator, waterproofer, also for oil resistant
renders and underwater concreting. For point
and surface waterproofing against seepage,
particularly sea water and sewage.
Sika 4A
Quick setting waterproofer for renders and leak
sealing, setting in about 45 seconds. For point
and surface waterproofing against general
seepage (should be covered with Sika 1 render).
Type Set Time Consumption per kg Pack Size
Cement*
Sika 2 10 to 20 seconds 0.7 5
Sika 4 25+ seconds 0.15-0.7 5
Sika 4A 45 seconds 0.18-0.35 525
*Note - all consumption rates vary on set time and required use.
214 Waterproofing
Sika 1
Sika 1 is an integral liquid waterproofing
admixture which when diluted with clean water
swells and blocks the pores and capillaries
within sand & cement renders and screeds,
supplied in 5 and 25 litre containers. It is also
part of the Sika 1 Pre Batched Mortar System,
(please see details on page 120).
Sizes: 5 Litres, 25 Litres
Consumption
As a general waterproofing admixture - approx
0.75 litre/25kg cement.
By volume 1 1 - - - - - - -
216 External Render
External Render
Renders
weber.pral M
A one-coat, ready-mixed, cementitious, weather
resistant, external decorative, through-coloured
render, suitable for most types of brick or
blockwork.
One coat for fast application and short
programme periods.
Through coloured for low maintenance -
decoration not required.
Formulated to be spray applied by render
pump for faster application.
weber.pral M offers a variety of ways to
achieve distinct architectural features.
Available in a range of 24 special colours.
BBA approved certificate no.05/4268.
Type Size Coverage
flexirend highbuild
A decorative and protective resin based surface
coating for application to exterior and interior
surfaces. It is a high quality, weather resistant
finish, which may be textured to a variety of
designs. It is available in a range of colours
and provides a superior quality appearance to
cement rendering, concrete and many other
backing materials.
Type Size Coverage
flexirend 15kg 1.7kg/m2/mm
highbuild
218 External Render
alpine finish - white travertine finish
alpine finish is a white cement-based mix
containing aggregates that provides a
decorative travertine finish.
Uses:
E nhances the protection of a traditional
rendering system
S uitable for external or internal use
Ideal for application onto primed weber.rend
OCR or other cement based render
Type Size Coverage
alpine finish - 25kg 1.52kg/m2/mm
white travertine
finish
cullamix tyrolean
cullamix tyrolean is a white or coloured
cement-based mix, which provides a decorative
and protective rendering. It is applied by hand
or power operated machines and provides an
open honeycomb textured (Tyrolean) finish.
Uses:
S uitable for internal or external use.
S uitable for most environments - coastal,
town suburban and rural
Type Size Coverage
cullamix 25kg 1kg/m2/mm
tyrolean
External Render 219
Ancillaries
weber.rend aid
Used to achieve a good key for rendering onto smooth or otherwise unsuitable but sound surfaces.
Ideal as a pre-treatment for renderings required to resist severe exposure conditions. Suitable
substrates include dense concrete, brick & blockwork, masonry and clean, sound, well adhered
existing render (<19mm).
Type Size Coverage
PRODUCTS PAGE
Polythene 221
Protective Blankets 223
Protection Board 225
Specialist Protection 226
Cill Protection 229
Accessories 231
Protection Materials 221
Polythene
On the roll polythene is the ideal
general protection product. All our
rolls of polythene are centre folded,
for example a four metre wide
sheet of plastic would be folded
onto a one metre roll for ease of
storage and transportation.
Type Weight Colour Size
Polythene 1000g Blue 4 x 25m
Black 4 x 25m
Polythene 1200g Blue 4 x 25m
Black 4 x 25m
Polythene 2000g Blue 4 x 12.5m
Black 4 x 12.5m
TPS 500g Black 4 x 50m
Clear 4 x 25m
222 Protection Materials
Temporary Rainwater Downpipe (layflat)
Ideal solution to rainwater staining of brickwork,
natural stone & render finishes etc, used prior
to the installation of rainwater pipes.
Supplied on a roll for diverting rainwater away
from brickwork and masonry
254mm is generally suitable for all outlets up
to 150mm diameter
Larger diameters available to order
A range of large diameter hose clips and zip
ties for fixing to gutter outlets are available
Type Width Roll length
Temporary Rainwater 156mm 100m
Downpipe
203mm 100m
240mm 100m
300mm 100m
50mm x 10m
Protection Materials 223
Protective Blankets
Frost Blankets
Application: Laying concrete at temperatures Frost blankets can be directly rolled onto
below 5C generally requires special the wet concrete. Wind conditions might
precautions (such as special concrete additives, necessitate the mats being held in place by
heating devices, hot vapour equipment, etc.). suitable loading at the contractors discretion.
An easy and inexpensive solution is the use of Beware not to walk on the mats during
frost blankets. The thermal insulation effect of installation and before hardening of the
the frost blanket significantly reduces the loss concrete.
of natural concrete hydration heat and thereby Available in roll size 1.5m x 75m
keeps the concrete warm long enough for a
safe curing. Colour: White/Black
Benefits: Concrete laying in summer and
winter season. The combination of their
excellent thermal insulation performance, their
negligible water absorption and their flexibility
make frost blankets ideal for improved concrete
curing.
Negligible water absorption
Excellent thermal insulation
Excellent chemical resistance
Fast laying from the roll
Lightweight, easy to handle and cut
Good mechanical resistance
Flexible at very low temperatures
Size: 75m x 1.5m x 6mm
400mm x 300m 6
Tarpaulins
A range of tarpaulins for temporary and long
term protection. Contact us for details.
Protection Materials 225
Bubble Wrap
Bubble wrap is a general purpose bubble
protection providing cover and impact protection
for both domestic and commercial uses.
Flame Retardant option available - accredited
with the LPCBs standard LPS 1207
Ideal for Kitchen and Sanitary ware and
covering stainless steel stair parts
Suitable for use with Easi-peel, easy tear tape
on finished surfaces
Type Size
Bubble wrap - LD (10mm bubble) 1.2 x 100m
Bubble wrap - HD (30mm bubble) 1.5 x 50m
Protection Board
TwinShield
Manufactured from twin wall polypropylene
board that is tough, durable, impact and
chemical resistant, non-toxic and waterproof.
TwinShield does not stain and is suitable for all
round protection.
Available in LPS 1207 FLAME RETARDANT
because of the increased concern about the role
of combustible materials fuelling major fires
TwinShield meets the very stringent quality
control standards of the LPCB
The LPCB logo and registration number are
printed on every sheet of the product
Simply and quickly cut, curved or creased,
lightweight and easy to position
Type Size Thickness Colour
TwinShield Standard 1.22 x 2.44m 2mm Black/Translucent
TwinShield Standard 1.22 x 2.44m 3, 4mm Translucent
TwinShield Standard 1.22 x 2.44m 5mm Black
TwinShield Standard 1 x 2 (door size) 2mm Black
TwinShield FR 1.22 x 2.44m 2, 3, 4mm Translucent
FloorShield Standard
Manufactured from recycled paper and
formed into a cardboard type material,
FloorShield Standard is a very economical and
environmentally friendly product.
Provides a degree of water and slip resistance,
easily cut with a knife and suitable for
protecting carpeted areas, vinyl, timber,
concrete, raised access, screeded floors,
worktops and doors. Ideal for protecting against
foot traffic and provides a degree of impact
resistance whilst maintaining a clean surface
below.
Type Size
Heavy Duty 1m x 50m
1m x 100m
Protection Materials 227
MegaShield
A range of flame retardant protection sheets accredited to LPS 1207. Certified by Loss
Prevention Certification Board (LPCB) in compliance with Loss Prevention Standard (LPS 1207).
Comprehensive range of grades to suit most applications and surfaces.
MegaShield High Performance has improved anti-slip and high impact characteristics over the
standard grade.
Type Size Area
Light duty E1-FR 167m x 1.5m x 65mu 250m2
Medium duty E2-FR 134m x 1.5m x 120mu 200m2
Heavy duty E3-FR 67m x 1.5m x 175mu 100m2
High performance 55m x 1.82 x 120mu 100m2
Housing grade 160m x 0.625m x 120mu 100m2
T400 Jointing tape 100mm x 50m N/A
T600 Jointing tape 50mm x 50m N/A
1200mm x 100m
Protection Materials 229
Cill Protection
TwinShield Cill Protector
Purpose made strips of impact resistant plastic,
which can be wrapped around and fixed simply
to most cills to protect from mortar droppings
or damage .
Supplied in 3mm x 300mm x 1200mm (25
per pack). Clips available in packs of 100.
Artstone Protection
A flexible heavy duty cushioned foam tube
which can be clipped directly round many
shapes of stone cill, being especially suited to
bay or bespoke window types .
Supplied in 114mm x 2m lengths (11 per box).
Also available in Flame Retardant LPS 1207 for
internal use.
230 Protection Materials
Protection Tapes
We stock a comprehensive range of fixing tapes
to suit all applications whether they are to be
used for jointing or sticking to finished surfaces.
We can also custom print many types of tapes
and can source any variation of adhesive to suit
your requirements.
Type Colour Size
SIG Construction - 50mm x 66m
Accessories Tape
Duo Tape - 50mm x 33m
Flame Retardant Tape - 50mm x 33m
Cloth Tape Black 50mm x 50m
Cloth Tape Black 75mm x 50m
Cloth Tape Black 100mm x 50m
Ultra Low Tack Tape - 50mm x 100m
Low Tack Tape - 50mm x 33m
Foil Tape - 75mm x 50m
Protection Materials 231
Accessories
Line Marker - Spray
Line marker paint in an aerosol spray. Used for
site markings.
Colour Size Box qty Pack
Yellow 750ml 6 Per can
Blue 750ml 6 Per can
Hazard Tape
Red and white diagonal warning tape.
Complete with dispenser box.
Size: 50mm x 33m. 24 rolls per box.
232 Accessories, Tools & Safety
Tell-Tale
An enhanced Tell-Tale crack monitoring
gauge that monitors horizontal and vertical
movement across a crack on a flat surface to
an accuracy of +/-1.0mm and by interpolation
to +/-0.5mm.
Builder Bucket
Plastic bucket with easy pouring lip and
comfortable grip handle.
Gorilla Bucket
A flexible rubberised bucket that is long lasting
and convenient for multiple purposes such as
carrying large loads and mixing products.
234 Accessories, Tools & Safety
Floor Scraper
For use in the removal of vinyl and ceramic tiles.
Brushes
A range of specialist and general purpose
brushes are available in sizes from 1 to 6, ideal
for painting, tar (long & short) and slurry.
Brooms
A range of specialist and general purpose
brooms, available for concrete finishing through
to cleaning.
Wire Brush
In various sizes with and without scraper back.
Contact Adhesive
High quality adhesive for bonding filler boards, polystyrene, insulation and protection boards to a
wide range of surfaces.
Size: 5 Litres
Accessories, Tools & Safety 235
Guns
Skeleton Gun
High quality gun for use with all 310 to 400cc
cartridges.
G Gun
Bulk gun used to apply gun grade sealants,
and in particular those supplied in 600cc foil
sausages.
Lokfix
Grout dispensing hand gun, to use with injected grouting systems.
Resin Hand Pumps
Resin dispensing gun, to use with resin
injection systems.
Foambond Guns
Plastic and metal versions available.
236 Accessories, Tools & Safety
Follower Plate
Used to transfer sealant from can to bulk gun.
Nailing Systems
Powder Actuated Nailing Systems
The professionals choice for cartridge nailing.
Fully automatic Spitfire P370 is the easiest tool
in the market to disassemble and maintain. We
supply a range of collated pins.
Disc cartridges 6.3mm Diameter/10mm length
Code Colour Strength Box Qty
031740 Brown Very Low 100
031600 Green Low 100
031700 Yellow Medium 100
Gaffa Tape
Laminated polythene/cloth tape coated with an aggressive pressure sensitive adhesive.
Double-sided Tape
Available in High Tack/ High Tack combination or High Tack/ Low Tack.
Size: 50mm x 50m
Tape Guns
Cuts down on the time needed to join materials.
Sizes Stanard Duty: 50mm
Heavy Duty: 50, 75, 100mm
Tools for Concrete
Trowels
Made from finest steel in plain, flat back round nose, double round ended and notched styles.
Bull Float
Hard wearing magnesium alloy tool for smoothing, levelling and finishing large areas of screed
and wet concrete.
Concrete Scoop
Concrete handling hand scoop.
Accessories, Tools & Safety 239
Notched Leveller
Notched blade for levelling floor toppings.
Slump Cone
Slump cone used with tamping rod (sold separately.)
Spiked Roller
The spiked roller for rolling out air bubbles from self levelling floor toppings. The spiked discs are
solvent resistant for ease of cleaning.
Spiked Shoes
The spiked shoes are for walking over self levelling floor toppings.
Squeegee
Smooth edge squeegee 1000mm width.
Straight Edges
With grips for tamping and levelling concrete.
Rubble Sacks
These hardwearing and reusable rubble bags
are recyclable, strong, tear resistant and
durable.
Size Maximum Weight
405 x 662mm 25kg
240 Accessories, Tools & Safety
Work Wear
SIG Construction Accessories can supply you with essential safety clothing
and Personal Protective Equipment (PPE), including high visibility wear,
EN approved helmets, goggles, safety boots and a range of protective
gloves. Our range is bigger than shown here; just ask your local branch for
more details.
Dust Suits
Provides effective clothing protection.
Accessories, Tools & Safety 241
Kneepads
To suit our knee pad trousers and other popular
styles.
Nylon Rainsuit
PVC coated nylon light and waterproof jackets.
Packed in zipped storage pouches
Colours: Dark blue or yellow.
Trousers sold separately.
Dark blue: M - XXXL.
Yellow: S - XXXL.
High Visibility Clothing
Polo Shirt
Colours: Yellow & orange
Yellow: S - XXXL.
Orange: S - XXL.
242 Accessories, Tools & Safety
High Visibility Waistcoat
With adjustable Velcro closing.
Footwear
Centurion Super Safety Boot
Leather upper, steel toe-cap to EN345 (200
joules). Steel midsole, padded collar and
tongue. Thinsulate lined for cold weather
comfort. Goodyear welded construction.
Breathable Cambrelle lining. Woven back puller
and front lace protector. Oil resistant,
non-marking sole, heat resistant to 300C with
a slip resistant tread.
Spiked Shoes
The spiked shoes are for walking over self levelling floor toppings.
244 Accessories, Tools & Safety
Gloves
A wide range of gloves are available by request.
Gauntlet Gloves
Hardwearing gloves that provide extra wrist
protection.
Accessories, Tools & Safety 245
PVC Coated Gloves with Knitted Wrists
Tough PVC coating for good abrasion protection
with soft cotton liner absorbs perspiration.
Snug knitted wrist for greater comfort and
waterproof for use in wet conditions.
Sol-Vex ANS37-675
Industry standard for high performance
chemical protection, with outstanding
combination of mechanical strength and
chemical resistance. Sanitized/Actifresh
to maintain hand hygiene and combat skin
irritation. Comfortable, flexible and long-lasting.
Length: 330mm
Thickness: 0.38mm
Sizes: 6 to 11
Hycron ANS27-600
Intermediate design, Nitrile palm coated,
stronger and more flexible than PVC. Excellent
dry grip with soft double jersey lining and
no seams in working area. Curved, pre-fixed
fingers and wing thumb. Silicone free and liquid
repellent coating.
Sizes: 9 - length 260mm, 10 - length 270mm
246 Accessories, Tools & Safety
Head Protection
Helmet MK2
Manufactured from impact resistant UV
Stabilised High Density Polyethylene with
integrated rain channel. Harness options:
Standard Poly/Slip.
Accepts Cliptite Accessories and conforms to
EN397.
Available in yellow, white, green, blue, red,
orange.
9172-265 Super G
CE approved to EN166 IF 100% UV protection
The worlds lightest safety specs, just 18 grams Excellent field of vision
The Super G unites innovative technologies Available with crystal frame (9172-110)
and high-tech materials
Extremely thin, aerodynamic lens
The lightweight frame incorporates XST
(x-stream technology) in the side-arms to
provide a secure fit
Optical Class 1 polycarbonate lens
Bolle Attack
A quality goggle which fits tightly to the face.
Offers anti-scratch and anti-mist properties.
Impact and chemical splash protection.
Ear Plugs
Comfortable ear protection to block out excessive noise levels.
Disposable P2 Valved Respirator (EN149:2001 FFP2)
Valved respirator protects against fine low to
average toxicity dusts, fibres, solid and liquid
aerosols.
Valve reduces the build up of heat/moisture
inside the mask and helps user acceptance.
Contoured fit, low breathing resistance.
Conversion Charts & Tables 247
Conversion Charts
Length Length Equivalents (Metric to Imperial)
To Convert Multiply By Metric (mm) Approx Imperial
(Feet - Inches)
Inches to Centimetres 2.54
1225 4-0
Centimetres to Inches 0.397
1375 4-6
Feet to Metres 0.3048
1525 5-0
Metres to Feet 3.281
1600 5-3
Yards to Metres 0.9144
1675 5-6
Metres to Yards 1.094
1750 5-9
Miles to Kilometres 1.609
1825 6-0
Kilometres to Miles 0.6214
1875 6-2
1975 6-6
Area
2025 6-9
To Convert Multiply By
2125 7-0
Square Inches to Square Centimetres 6.452
2175 7-2
Square Centimetres to Square Inches 0.155
2275 7-6
Square Metres to Square Feet 10.76
2350 7-9
Square Feet to Square Metres 0.0929
2425 8-0
Square Yards to Square Metres 0.8361
2600 8-6
Square Metres to Square Yards 1.196
2750 9-0
Square Miles to Square Kilometres 2.59
2825 9-3
Square Kilometres to Square Miles 0.3861
2900 9-6
Acres to Hectares 0.4047
2975 9-9
Hectares to Acres 2.471
3050 10 - 0
248 Conversion Charts & Tables
Volume Weight
To Convert Multiply By To Convert Multiply By
Cubic Inches to Cubic Centimetres 16.39 Grains to Grams 0.0648
Cubic Centimetres to Cubic Inches 0.06102 Grams to Grains 15.43
Cubic Feet to Cubic Metres 0.02832 Ounces to Grams 28.35
Cubic Metres to Cubic Feet 35.31 Grams to Ounces 0.03527
Cubic Yards to Cubic Metres 0.7646 Pounds to Grams 453.6
Cubic Metres to Cubic Yards 1.308 Grams to Pounds 0.002205
Cubic Inches to Litres 0.01639 Pounds to Kilograms 0.4536
Litres to Cubic Inches 61.03 Kilograms to Pounds 2.205
Gallons to Litres 4.546 Tons to Kilograms 1016
Litres to Gallons 0.22 Kilograms to Tons 0.000984
h d
h
l h
R
Area of base = A
Perpendicular height = h Volume = 1/3nh (R2 + Rr + r2)
Volume = 1/3 x A x h Curved surface area = nl (R + r)
Total surface area = nl (R + r) + nr2 + nR2
Cone
l
h
l h
R
250 Index
Cullamix Tyrolean 218
A B
Curing Tank 239
Accelerator 44 Bar Grout Estimator 96
Accessories, Tools & Safety Equipment Bentoject 199 D
232 Bentonite Geotextile Waterproofing 174
Adcor 500S 188 Bentorub+ & Salt 193 Dekguard 27-28
Ardex A 23 64 Bentoseal 175 Denso Mastic, Paste, Tape 123
Adhesive 234 Bitumen Impregnated Boards 113 Double Drain Waterproofing Ancillaries
Admixtures 44,68-69 Bitusheet Waterproofing Ancillaries 163
Adoclean 143 171-172 Double Drain Waterproofing Membranes
Adocure 137-139 Bitusheet Waterproofing Membranes 163
Adofill 128 171 Double-sided Tape 238
Adofoam 134 Bituthene Primers 155 Dual Seal Waterproofing Ancillaries 178
Adolease 133 Bituthene Protection Boards 155 Dual Seal Waterproofing Membranes
Adoseal 132 Bituthene Waterproofing Ancillaries 177
Adostrike 129 155-156 Dual Stop Bentonite Waterstop 192
Adostrip 128 Bituthene Waterproofing Membranes Dualtite Joint Waterstop 192
Adotuf 136 153-154 Dust Suits 240
Aerofil 1 & 2 112 Bolts 105
Aggregates 68,85 Boots 242-243
E
Anchors 102-108 Brushes 234
Anti Graffiti Coating 29 Bubble Wrap 225 Ear Plugs 246
Aqua Channel Drainage 167-168 Buckets 233 Edgetie 189
Aquatek 204-205 Bull Float 238 Emaco Nanocrete 8-10
Ardex A 35 Mix 7,64 Epcon C8 Extreme 98
Ardex A 35, K 301, PSRS 6 Epcon High Performance Chemical Resin
C
Ardex A 38, PSRS 65 99
Ardex A 45, A 46 5 C Mix Plus Polyester Resin 101 Epobar Vinylester Resin 101
Ardex A 55, K 11, K 15, K 15-HB 61 Cable Ties 234 Epomax Vinylester Resin 100
Ardex AM 100, P 4, P 51, P 82 67 Carpet Protection Film 228 Expoflex 800 115
Ardex C 2, Flex FL, Flex FS 59 Cavity Drain Waterproofing Membranes External Render 216
Ardex D 20, D 30 58 165
Ardex DPM 1 C Rapid 70 Cebex 100 91
Ardex DPM, DPM 1 C, WPC 69 F
Cementfill FC, HB, WP 202-203
Ardex E 90, E 101, Aggregate 68 Cementflex 203 Famguard 150
Ardex Fast Track Floor Screeding 64-65 Cementitious Coating 851 14,207 Fastfill 13
Ardex Fast Track Industrial Topping 66 Cementitious Waterproofing 203-212 Fastfill WP 201
Ardex Feather Finish, RS Plus 63 Cementjoint 204 Febset 45 11
Ardex Grouts 59-60 Cementseal & Cementseal Primer 204 FebTank Plug 202
Ardex K 301, K 80, SD-T B 66 Cempoint 83 FebTank Super 207
Ardex MG 60 Cemprotec 208 Fire Protection Products 125-127
Ardex S 16, S 16 W, S 20, S 20 W, X 32 Cemtop 72-73 Firestop Strip 127
55 Cill Protection 229 Fischer FBN Bolts 103
Ardex S 21, D 15, X 7001, X 7001 W 57 Colpor 200PF 118 Fischer FH High Performance Anchors
Ardex Sub Floor Smoothing 61-63 Compriband Super 110 104
Ardex Tile Adhesives 54-58 Conbextra 89-90,93 Fischer FSA Sleeve Anchors 103
Ardex X 7, X 7 G Plus, X 7 R, X 7 R W 54 Conbextra EP10, EPR 93 Fischer FWB Wallbolts 104
Ardex X 77, X 77 W, X 77 S, X 77 W S, Concrete Dustproofer 140 Fischer High Performance Steel Anchors
X 78, X 78 S, X 78 W S 56 Concrete Pins 236-237 102
Arditex 62-63 Concrete Remover 144 Five Star Grout, SP 88
AT System 190 Concrete Repair & Protection 4 Five Star Repair Concrete 47
Concrete Scoop 238 Flamex One, Two & S 126-127
Conversion Charts 247 Flexcrete Cementitious Coating 207-208
Index 251
Flexirend Highbuild 217
K O
Flexiseal 180
Flooring & Tiling 53 Kneepads 241 Omnitek 205
FloorShield 226-228
Flowpoint 82-83
Footwear 242 L P
Formwork Chemical Applicators 145 LAC 181 Pallet Wrap/Cling Film 224
Formwork Chemicals 128 Latex Gloves 244 Paraseal 118
Fosroc Concure WB 140 Leakmaster 200 Patchroc GP 21
Fosroc Primer 3 178 Level IT 74-75 Paveroc 21
Frost Blankets 223 Leveller 239 Pentra-Sil 10
Limelite Plasters 211-212 Pinkgrip 119
G Line Marker Spray 231 Plaster Drain Waterproofing Ancillaries
Liquid Waterproofing Membranes 164-165
Gaffa Tape 238 178-182 Plaster Drain Waterproofing Membranes
Galvafroid 21 Lisochem 39-31 164
Geofix 81 Lokfix P25, S25 95 Plastijoint 117
Gloves 244-245 Polo Shirt 241
Goggles 246 Polythene 221
Gripfill 119 M
Polythene Jointing Tape 222
Grouts & Anchors 87 Mask 246 Preprufe Waterproofing Ancillaries
Guns 235 Masking Tape 238 155-156
Masterflow 765 91 Preprufe Waterproofing Membranes
H MegaShield 227 156-158
Monodex 15 Pro-Bed 82
Hard Hat 246 Monolevel 13 Profiles 195
Hazard Tape 231 Monolite 12 Proofex 3000, 3000MR 147
Head Protection 246 Monomix 12 Proofex Angle Filler 150
Hessian Blankets 224 Monomix HD 13 Proofex Cavity Drain, Engage 148
Heviseal 181 MonoTop 37 Proofex Hydromat, Hydromat Powder
High Visibility Clothing 237-239 Mortar 33 149,175
Hilastic 115 Mulseal DP 178 Proofex LM 152,179
Hydrocell XL 113 Proofex Primer 150
Hydrocoat 181 Proofex Protection Board 152
Hydroduct Waterproofing Ancillaries N Proofex Sheetdrain 149
161 Nailing System 236 Proofex Top Hat 151
Hydroduct Waterproofing Membranes Nanocrete 8-10 Proofex Waterproofing Ancillaries
159-161 Nitobond 26 150-152
Hydromat 149,175 Nitobond SBR 212 Proofex Waterproofing Membranes
Hydrotite 200 Nitocote 19-20 147-150
Hyload Waterproofing Ancillaries 170 Nitocote CM210 209 Protection Board 225
Hyload Waterproofing Membranes Nitofil 25 Protection Materials 220
168-169 Nitoflor 71-72,140 Protection Tapes 230
Nitokit 24 PU Foam 125
PVC Edgetie 189
I Nitomortar 22
Nitoprime 23,27,29 PVC Waterstops Profiles 191
IKO Waterproofing Ancillaries 170 Nitoseal 113-116,175 Pyrabed, Pyratop 47
IKO Waterproofing Membranes 168-169 Nuts 105
Intersections 190
252 Index
Sika Dustproofer 140 Thoroseal, Super 206
R
Sika FerroGard 38 Threaded Studding, Washers,
Rainsuit 241 Sika Foams 121 Nuts & Connectors 105
Renderoc 16-19 Sika Grout 92 Tiling Renders 67
Renderoc Plug 202 Sika Hardeners 142 Toughseal 182
Respirator 246 Sika Injectoflex 201 TP600 111
RIW Waterproofing Ancillaries 166-167 Sika Primer 3N 122 Trousers 240
RIW Waterstop 194 SikaBond T2, T54 79 Trowels 238
Rollers & Trays 234 SikaCem 810 77 TwinShield 225
Ronabond 31-33 Sikadur 42 94 TwinShield Cill Protector 229
RonaBond Concrete Repair Mortar Sikadur 40-42
31-32 Sikadur-31GB Rapid 40
U
Ronadeck Aggregates 85 Sikadur-Combiflex 121
Ronadeck Resin Bonded 84-85 Sikaflex 120 Ultrafloor 74-75
Ronadeck Tree Pit 85 Sikafloor 77-78,142 Ultrascape 82-83
Ronafix 76,214-215 SikaGard 38,39,42,43 Uraswell Waterstop 193
Ronafix Mix Design 36,215 SikaSwell 200
Ronafloor Concrete Dustproofer 140 SikaTop 37,38,41,209
V
RonaFloor Repair 1 Hour 35 Slabdrain Waterproofing Ancillaries
RonaFloor EWB, HB200 76 173 Vandex BB 75, BB 75 E, Super/Super
RonaRoad Manhole Concrete, Mortar 34 Slabdrain Waterproofing Membranes White 210-211
Rubble Sacks 239 172 Vandex Plug 202
Slip Membrane 123 Vertiseal CE 118
Slump Cone 239 Visqueen Liquid Gas Membrane 180
S Spiked Roller, Shoes 239,243 Vitaseal Foam Tapes 124-125
Safecure Standard 135 Sprayers 145 Voltex 174
Safecure Super 136 Squeegee 239
Safelease 128 Staple Gun 177
W
Safetard Gel 131 Steel Re-inforcement Protector 841 12
Safetard Liquid 130 Structureseal Waterproofing Ancillaries Walldrain Waterproofing Ancillaries
Safety Boots 242-243 176-177 172
Safety Goggles 246 Structureseal Waterproofing Membranes Walldrain Waterproofing Membranes
Safety Head Protection 246 176 172
Safety Trainers 243 Studding 105 Washers 105,177
Sanitary Ware Protection 228 Supercast 184-187 Waterproofing 146
SBR Bond 70,213 Superstop Self Swelling Waterstop 192 Waterstop 176,194
Sealants, Joint Fillers & Chemicals 109 Swellseal 196-198 Waterstops & Waterplugs 184-202
Sealing Compound 176 Swelltite 193 weber Renders 217-219
Seekure FR 226 Synaprufe 183 weber.cem 44-47,89
Servijoint One & Two 119 weber.cem Grout 89
Serviseal 189 T weber.cote 51-52
Servitite 189 weber.pral M 217
Sheetseal Waterproofing Ancillaries Tape Guns 238 weber.rend aid 219
162-163 Tapes 238 weber.tec acrylic sealer 80,143
Sheetseal Waterproofing Membranes Tarmac Plaster 212 weber.tec Anchor Grout, Grout FG 96-97
162 Tarpaulins 224 weber.tec EP Pourable Grout 94
Sika 1 210,214 Tell-Tale 233 weber.tec EP Range 48-50
Sika 2, 3, 4 & 4A 213 Temporary Rainwater Downpipe 222 weber.tec guard MCI 51
Sika Anchorfix-1, Anchorfix-2 97 Thermometer 233 weber.tec Mortar, EP Mortar 50
Sika Block Paving Seal, Pave Fix Plus, Thioflex 600 117-118 Wintermix 44
Patio Seal 86 Thoro Acryl 206 Wire Brush 234
Sika Damp Proofing Slurry 209 Thoro Waterplug 201 Work Wear 240
Sika Dryshakes 77 Thoroflex 200 116
Notes 253
254 Notes
Aberdeen Eurocentral Oxford
Silverburn place, Bridge of Don Plot C, Coddington Crescent, Unit 5, Curbridge Business Park, Downs
Aberdeen, AB23 8EG Eurocentral, Holytown, Motherwell, Road, Witney, Oxfordshire, OX29 7WJ
Tel: 01224 822 798 North Lanarkshire, ML1 4YF Tel: 01993 704289
Fax: 01224 823 741 Tel: 01698 731910 Fax: 01993 708993
Fax: 01698 731911
Ash Vale Plymouth
Lysons Link South, Lysons Avenue Geotechnical Centre 87 St. Modwen Road, Parkway Industrial
Ash Vale, Surrey, GU12 5GN Unit 2, Warrington South Distribution Park, Estate, Marsh Mills, Plymouth, PL6 8LH
Tel: 01252 527000 Lyncastle Road, Warrington, WA4 4SN Tel: 01752 894965
Fax: 01252 527001 Tel: 0844 443 0050 Fax: 01752 895896
Fax: 0844 443 0051
Bedford Ruislip
Telford Way, Bedford, MK42 0PQ Glasgow Unit 4, Victoria Road Retail Park, Crown
Tel: 01234 268 427 21 Dava Street, Glasgow, G51 2JA Road, South Ruislip, London, HA4 0AF
Fax: 01234 268 057 Tel: 0141 445 7960 Tel: 020 8606 8060
Fax: 0141 445 1078 Fax: 020 8606 8070
Birmingham
Apollo Park, Rounds Green Road, Inverness Thurrock
Oldbury, West Midlands, B69 2DF 28 Harbour Road, Inverness, IV1 1UA Victor House, Bay Manor Lane,
Tel: 0121 5220200 Tel: 01463 701 200 Essex, RM20 3LL
Fax: 0121 5220201 Fax: 01463 701 201 Tel: 020 8591 9991
Fax: 020 8591 9992
Bristol Leeds
Unit 13, Concorde Rd, Patchway Trading Intermezzo Drive, Pontefract Road, Tyneside
Estate, Bristol, BS34 5TB Stourton, Leeds, LS10 1RU Federation Business Park, St Omers Road,
Tel: 0117 301 3620 Tel: 0844 443 0052 Dunston, Tyne and Wear, NE11 9EE
Fax: 0117 301 3621 Fax: 0844 443 0053 Tel: 0191 487 4983
Fax: 0191 491 5790
Cardiff Manchester
Southpoint Foreshore Road, The Parkway Centre, Longbridge Road,
Cardiff, CF10 4SP Trafford Park, Manchester, M17 1SN
Tel: 029 20465553 Tel: 0161 872 5464
Fax: 029 20493089 Fax: 0161 872 5399
Chesterfield Norwich
Unit 1, Sheepbridge Centre, Sheepbridge Unit 27, White Lodge Business Park,
Lane, Chesterfield, S41 9RX Hall Road, Norwich , NR4 6DQ
Tel: 01246 572 595 Tel: 01603 224 899
Fax: 01246 572 596 Fax: 01603 224 898
6 16 17
5
GEOTECHNICAL CENTRE 2
19 Geotechnical Centre
Unit 2, Warrington South Distribution Park,
Lyncastle Road, Warrington, WA4 4SN 15
Tel: 0844 443 0050 Fax: 0844 443 0051 www.sig-ca.co.uk
E: enquiries@sig.co.uk
enquiries@sig-ca.co.uk
We now do business in the Middle East. For full branch details see page 255.
All rights reserved. No part of this publication may be reproduced or transmitted in any form, or by any means, electronic or mechanical including photocopy,
recording or any information storage and retrieval system, without permission in writing from SIG Trading Ltd. No information contained within this publication
can be used to compile any other printed or electronic directory or mailing list. Whilst every effort has been made to ensure accuracy, the publisher does not, under
any circumstances, accept responsibility for errors or omissions. Copying of the images contained in this publication, in any form without the authors permission, is an
unlawful act under the Copyright Designs and Patent Act 1988.
E&OE