Académique Documents
Professionnel Documents
Culture Documents
L7315
Cl/SfB
(52.5) ACO Building Drainage
Dr ai nage Syste ms
Product catalogue
ACO DeckLine 125
Galvanised Steel Channel System
ACO Building Drainage
Pipe Systems
Contents
System Overview
Technical Data
Installation procedure 7
13
7
10
1 6
2
3
11 12
15
8
4
14
5 3
9
1 Channels manufactured from hot-dipped 6 Corner unit 11 Rigid PVC infill provided as standard to
galvanised steel to BS EN ISO 1461: support channel edge in trafficked
7 Fully welded flange plates provide
2009 available in 0.5m 1m, 2m and applications
watertight channel joints, 4-point
3m lengths
channel connection security and 12 Grating choice includes galvanised steel
2 Two locking points per metre alignment perforated, slotted and composite black
or white to Load Class C250 to BS EN
3 50mm level invert depth ideal for car 8 Universal closing end plate
1433. All gratings supplied complete
park decks or other areas where similar
9 Convenient 110mm OD spigot outlet with lockings
construction restrictions exist
10 Neoprene gasket for 100% watertight 13 Vee-bottomed channel to enhance flow
4 Branch unit for intersecting drain runs
channel joint connection velocity at low flow rates
5 All channel components supplied
14 Optional in-line foul air trap with 50mm
complete with levelling feet and concrete
water seal. Flow rate 1.2 l/s
anchors to aid installation
15 Optional outlet sieve
ACO DeckLine 125 Shallow Invert Surface Water Drainage System
Technical detail
153 L
97
63
50
*70
*Maximum
Description Part No L mm Weight kg
639
Corner Unit
153
125
63
50
97
514
500
*70
*Maximum
Description Part No Weight kg
639
Branch Unit
500
250
63
4
50
*70
*Maximum
Description Part No Weight kg
153 L
125 75
97
63
50
Outlet Unit
*70
115
*Maximum
110
Technical detail
14 153
End Plate 3
50
63
1.5
Sieve
104.5
5
110mm
Foul Air Trap A
52mm
A15 C250
Slotted 500 1000 20 20
250 250 500
123
123
31
BS EN 1433
Description Part No Length mm Finish Weight kg
Load Class
Perforated
500 1000 20
250 250 500
BS EN 1433
Description Part No Length mm Finish Weight kg
Load Class
U-Profile Grating
500 1000 20
250 250 500
6
30
BS EN 1433
Description Part No Length mm Finish Weight kg
Load Class
95 123
8 9 21
BS EN 1433
Description Part No Length mm Finish Weight kg
Load Class
7
Operation and Maintenance
Because of the nature of the channel system, Cleaning Galvanised Steel Galvanised Steel Maintenance
care should be taken to maintain a clear Galvanised steel surfaces can be cleaned and Heavy damage to the galvanised surface
waterway within the channel. Inspections rinsed with copious amounts of clean water. exposes the underlying metal to the
should be made periodically to assess the Stubborn stains are to be removed with a stiff atmosphere and corrosion will result if not
extent of the debris build-up and maintenance bristled brush. Do not use a wire brush. treated. Any corrosion should be removed by
schedule established to remove such debris. light abrasion and the area treated with one of
the many commercially available zinc sprays
using the manufacturers instructions.
100mm 100mm
minimum minimum
Max 70mm
30 - 200mm
ACO Technologies plc
ACO Sport
ACO Wildlife
e-mail: abdinfo@aco.co.uk
www.acobd.co.uk
April 2017 ACO Technologies plc. All reasonable care has been taken in compiling the information in this document. All
recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond
the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose, and that the
actual conditions of use are suitable. This brochure and any advice is provided by ACO Technologies plc (the Company) free of
charge and accordingly on terms that no liability including liability for negligence will attach to the Company or its servants or
agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company
will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of
continuous product development and improvement renders specifications liable to modification. Information provided in this
brochure is therefore subject to change without prior notification.