Académique Documents
Professionnel Documents
Culture Documents
Compass brand/
Sharpening and Polishing Stones,
Combination Stones, Glass Stones
and Scythe Stones have for long
been the industry standard in
quality and performance.
BONDED ABRASIVES
TYPICAL A PPLICATIONS
Sharpening of carpentry tools, knives, Auto Cutting General Tools
Industry Jewellery
scissors, etc. OEM Tool Engg & Dies
Usage
Mould and die polishing Primary Use Secondary Use
Deburring
Though Grindwell Norton mainly offers Use a Silicon Carbide Stone (37C) for
Compass Brand/ stones in 37C, stones working on softer metals, such as brass,
iron or stainless steel.
in Aluminium Oxide are also available in
select categories. Refer the Stock Availability Use Aluminium Oxide Stone for harder
Table for further details. steels.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSES SUGGESTED CORRECTION
Stone does not cut Loaded/clogged with metal Clean with oil or wire brush
or sandpaper
Not enough lubricant Use more oil
Stone too fine Use coarser stone
Poor surface quality, deep Stone is too coarse Use finer stone
scratches, excessive tool wear Stone is too soft Choose different abrasive
Tool edge not sharp enough Stone is coarse Hone with a finer grit