Académique Documents
Professionnel Documents
Culture Documents
MS/MS
IEC/ MS MS No Year Accession No Title Type Location
ISO
MS 1 1996 MS 1:1996 Specification for protective helmets for vehicle users (second revision) Malaysian Standard RACK 1
MS 7 1971 MS 7:1971 Specification for tungsten filament electric lamp for general service Malaysian Standard RACK 1
Testing of concrete - Part 1: Fresh concrete - Section 2: Slump test (Second
MS 26 2009 MS 26-1-2:2009 Malaysian Standard RACK 1
revision)
Testing of concrete - Part 1: Fresh concrete - Section 3: Vebe test (Second
MS 26 2009 MS 26-1-3:2009 Malaysian Standard RACK 1
revision)
Testing of concrete - Part 1: Fresh concrete - Section 5: Flow table test
MS 26 2009 MS 26-1-5:2009 Malaysian Standard RACK 1
(Second revision)
Testing of concrete - Part 1: Fresh concrete - Section 6: Density (Second
MS 26 2009 MS 26-1-6:2009 Malaysian Standard RACK 1
revision)
Testing of concrete - Part 1: Fresh concrete - Section 7: Air content - Pressure
MS 26 2009 MS 26-1-7:2009 Malaysian Standard RACK 1
methods (Second revision)
Testing of concrete - Part 1: Fresh concrete - Section 8: Compacting factor test
MS 26 2009 MS 26-1-8:2009 Malaysian Standard RACK 1
(second revision)
MS 26: Part 3: Methods of testing concrete Part 2 : Methods of testing hardened concrete
MS 26 1991 Malaysian Standard RACK 1
1991 (First revision)
MS 28 1985 MS 28:1985 Methods of test for water for making concrete (First revision) Malaysian Standard RACK 1
Methods of testing aggregates Part 1: General requirements for apparatus and
MS 30 1995 MS 30-1:1995 Malaysian Standard RACK 1
calibration in coarse aggregate
Methods of testing aggregates Part 11: Methods of the determination of
MS 30 1995 MS 30-11:1995 resistance to degradation of coarse aggregate by abrasion and impact in the los Malaysian Standard RACK 1
angeles machine (First revision)
Methods of testing aggregates Part 12: Methods for the determination of the
MS 30 1995 MS 30-12:1995 Malaysian Standard RACK 1
polished-stoned value (First revision)
Methods of testing aggregates Part 13: Methods for determination of water-
MS 30 1995 MS 30-13:1995 Malaysian Standard RACK 1
soluble chloride salts
Methods of testing aggregates Part 14: Methods for determination of sulphate
MS 30 1995 MS 30-14:1995 Malaysian Standard RACK 1
content
Methods of testing aggregates Part 15: Methods for determination of acid-
MS 30 1995 MS 30-15:1995 Malaysian Standard RACK 1
soluble material in fine aggregates
Methods of testing aggregates Part 16: Methods for testing and classifying
MS 30 1995 MS 30-16:1995 Malaysian Standard RACK 1
drying shrinkage of aggregates in concrete
Methods of testing aggregates Part 17: Methods for determination of
MS 30 1995 MS 30-17:1995 Malaysian Standard RACK 1
soundness
MS 30 1995 MS 30-3:1995 Methods of testing aggregates Part 3: Methods for sampling (First revision) Malaysian Standard RACK 1
Page 1 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 2 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 3 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 4 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 5 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Specification for wire ropes for cranes, excavators and general engineering
MS 551 1978 MS 551:1978 Malaysian Standard RACK 1
purposes
MS 555 1985 MS 555: 1985 Specification for fire dampers (First revision) Malaysian Standard RACK 1
MS 555 2003 MS 555-1: 2003 Fire dampers: Part 1: Specification (Second revision) Malaysian Standard RACK 1
MS 555 2003 MS 555-2: 2003 Fire dampers: Part 2: Installation (Second revision) Malaysian Standard RACK 1
MS 556 1978 MS 556: 1978 Electrical safety code on private electric generating plant Malaysian Standard RACK 1
Specification for portable fire extinguishers - Part 3: Selection and installation
MS 566 2003 MS 566-3: 2003 Malaysian Standard RACK 1
- Code of practice (First revision)
MS 588 1979 MS 588: 1979 Specification for radio interference suppression on marine installations Malaysian Standard RACK 1
Specification for 13A plugs, socket-outlets, adaptors and connection units Part
MS 589 1997 MS 589-1: 1997 1: Specification for rewirable and non-rewirable 13A fused plugs (First Malaysian Standard RACK 1
revision)
Specification for 13A plugs, socket-outlets, adaptors and connection units Part
MS 589 1997 MS 589-2: 1997 2: Specification for 13A switched and unswitched socket - outlet (First Malaysian Standard RACK 1
revision)
Specification for 13A plugs, socket-outlets, adaptors and connection units Part
MS 589 1998 MS 589-3: 1998 Malaysian Standard RACK 1
1: Specification for adaptors (First revision)
Specification for low voltage air break switches, air break disconnectors, air
MS 590 1979 MS 590: 1979 Malaysian Standard RACK 1
break switch disconnectors and fuse combination units
MS 591 1979 MS 591: 1979 Nomenclature for pistons for internal combustion engines Malaysian Standard RACK 1
MS 593 1979 MS 593: 1979 Specification for performance requirements of hot-forged rivets Malaysian Standard RACK 1
MS 603 1979 MS 603: 1979 Code of practice for interior lighting Malaysian Standard RACK 1
Switches for household and similar fixed electrical installations: Part 1:
MS 616 1998 MS 616-1: 1998 Malaysian Standard RACK 1
General requirements (First revision)
Switches for household and similar fixed electrical installations: Part 2:
MS 616 2000 MS 616-2-1: 2000 Particular requirements Section 1: Electronic switches (IEC 60669-2-1: 1996 Malaysian Standard RACK 1
and its amendment 1: 1997 and proposed amendment 2: 1999 (CDV), MOD)
Switches for household and similar fixed electrical installations: Part 2:
MS 616 2000 MS 616-2-2: 2000 Particular requirements Section 2: Remote control swithes (RCS) (IEC 60669- Malaysian Standard RACK 1
2-2: 1996 and its amendment 1: 1997)
Switches for household and similar fixed electrical installations: Part 2:
MS 616 2000 MS 616-2-3: 2000 Particular requirements Section 3: Time delay switches (TDS) (IEC 60669-2-3: Malaysian Standard RACK 1
1997, MOD)
MS 619-102-
MS 619 1985 Specification for luminaries for emergency lighting Malaysian Standard RACK 1
102.22: 1985
MS 619-2-22: Luminaires - Part 2-22: Particular requirements - Luminaires for emergency
MS 619 2005 Malaysian Standard RACK 1
2005 lighting (First revision) (IEC 60598-2-22: 1997 and AMD.1: 2002,MOD)
Page 6 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 7 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 770 1982 MS 770 : 1982 Specification for ceiling roses Malaysian Standard RACK 1
MS 774 1982 MS 774 : 1982 Industrial V-belts Malaysian Standard RACK 1
MS 792 1982 MS 792 : 1982 Specification for typewriter ribbon, nylon Malaysian Standard RACK 1
MS 793 1982 MS 793 : 1982 Specification for typewriter ribbon, cotton Malaysian Standard RACK 1
MS 794 1982 MS 794 : 1982 Specification for masonry cement Malaysian Standard RACK 1
MS 794 2010 MS 794 : 2010 Masonry cement - specification (First revision) Malaysian Standard RACK 1
MS 795 2002 MS 795 : 2002 Specification for WC flushing cisterns and flush pipes (First revision) Malaysian Standard RACK 1
MS 795 2011 MS 795-1: 2011 WC Flushing cisterns - Part 1: Specification (Second revision) Malaysian Standard RACK 1
MS 795 2011 MS 795-2: 2011 WC Flushing cisterns - Part 2: Inlet Valves (Second revision) Malaysian Standard RACK 1
MS 795 2011 MS 795-3: 2011 WC Flushing cisterns - Part 3: Flushing device (Second revision) Malaysian Standard RACK 1
MS 796 1982 MS 796 : 1982 Specification for small wire ropes Malaysian Standard RACK 1
MS 797-1&2 : Part 1: Specification for concrete interlocking roofing tiles Part 2: Code of
MS 797 1982 Malaysian Standard RACK 1
1982 recommended practice for the installation of concrete interlocking roofing tiles
Guide to the calculation of resistance of plain and tinned copper conductors of
MS 798 1982 MS 798 : 1982 Malaysian Standard RACK 1
low frequency cables and wires
MS 823 1983 MS 823 : 1983 Specification for bull dog grips Malaysian Standard RACK 1
MS 824 1983 MS 824 : 1983 Specification for thimbles for wire ropes Malaysian Standard RACK 1
Code of practice for the design of road lighting Part 1: Lighting of roads and
MS 825 2007 MS 825-1 : 2007 Malaysian Standard RACK 1
public amenity areas (First revision)
Code of practice for the design of road lighting Part 4: Performance
MS 825 2012 MS 825-4 : 2012 Malaysian Standard RACK 1
requirements
Code of practice for the design of road lighting Part 5: Calculation of
MS 825 2012 MS 825-5 : 2012 Malaysian Standard RACK 1
performance
Code of practice for the design of road lighting Part 6: Methods of measuring
MS 825 2012 MS 825-6 : 2012 Malaysian Standard RACK 1
lighting performance
MS 826 1983 MS 826-1 : 1983 Glossary of terms used in data processing Part 1: Fundamentals terms Malaysian Standard RACK 1
Glossary of terms used in data processing Part 12: Data media, storage and
MS 826 1986 MS 826-12 : 1986 Malaysian Standard RACK 1
related equipment
Glossary of terms used in data processing Part 14: Reliability, maintenance and
MS 826 1986 MS 826-14 : 1986 Malaysian Standard RACK 1
availability
MS 826 1987 MS 826-16 : 1987 Glossary of terms used in data processing Part 16: Information theory Malaysian Standard RACK 1
MS 826 1987 MS 826-19 : 1987 Glossary of terms used in data processing Part 19: Analog computing Malaysian Standard RACK 1
Glossary of terms used in data processing Part 2: Arithmetic and logic
MS 826 1983 MS 826-2 : 1983 Malaysian Standard RACK 1
operations
Glossary of terms used in data processing Part 3: Equipment technology
MS 826 1983 MS 826-3 : 1983 Malaysian Standard RACK 1
(selected terms)
MS 826 1983 MS 826-4 : 1983 Glossary of terms used in data processing Part 4: Organization of data Malaysian Standard RACK 1
Page 8 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 826 1983 MS 826-5 : 1983 Glossary of terms used in data processing Part 5: Representation of data Malaysian Standard RACK 1
Glossary of terms used in data processing Part 6: Preparation and handling of
MS 826 1983 MS 826-6 : 1983 Malaysian Standard RACK 1
data
Glossary of terms used in data processing Part 7: Digital computer
MS 826 1983 MS 826-7 : 1983 Malaysian Standard RACK 1
programming
Code of practice for the storage, handling and transportation of liquefied
MS 830 2003 MS 830 : 2003 Malaysian Standard RACK 1
petroleum gases (Second revision)
Specification for valves for use with domestic liquefied petroleum gas (LPG)
MS 831 1986 MS 831 : 1986 Malaysian Standard RACK 1
cylinders
MS 832 1984 MS 832 : 1984 Specification for aluminium alloy windows Malaysian Standard RACK 1
MS 832 2011 MS 832 : 2011 Aluminium alloy windows - specification (First revision) Malaysian Standard RACK 1
MS 838 1983 MS 838 : 1983 Code of practice for radiation protection (medical x-ray diagnosis) Malaysian Standard RACK 1
MS 839 1983 MS 839 : 1983 Code of practice for the reception of sound and television broadcasting Malaysian Standard RACK 1
MS 840 1983 MS 840 : 1983 Recommended methods for soil physical analysis Malaysian Standard RACK 1
MS 847 1983 MS 847 : 1983 Specification for silica sand for the manufacture of sodium silicate Malaysian Standard RACK 1
MS 854 1983 MS 854 : 1983 Specification for ball-point pens and refills Malaysian Standard RACK 1
MS 855 1983 MS 855 : 1983 Specification for newsprint Malaysian Standard RACK 1
MS 856 1983 MS 856 : 1983 Specification for envelopes for storage of processed x-ray films Malaysian Standard RACK 1
MS 857 1983 MS 857 : 1983 Specification for bordeaux connections Malaysian Standard RACK 1
MS 858 1983 MS 858 : 1983 Specification for glazed ceramic tiles for internal walls Malaysian Standard RACK 1
Specification for power supply units for extra low voltage output Part 1: Units
MS 860 1983 MS 860-1 : 1983 Malaysian Standard RACK 1
for indoor use
Specification for radio frequency communication cables Part 1: General
MS 861 1983 MS 861-1 : 1983 Malaysian Standard RACK 1
requirements and measuring methods
Specification for welded and seamless carbon steel pipes for general pressure
MS 862 1983 MS 862 : 1983 Malaysian Standard RACK 1
purposes
Specification for welded and seamless carbon steel pipes (6 mm to 150 mm)
MS 863 1983 MS 863 : 1983 Malaysian Standard RACK 1
screwed - type
Code of practice for methods of defining, recording and assessing work
MS 866 1983 MS 866 : 1983 Malaysian Standard RACK 1
injuries
MS 870 1984 MS 870 : 1984 Specification for soft solder Malaysian Standard RACK 1
MS 873 1984 MS 873 : 1984 Specification for powdered activated carbon Malaysian Standard RACK 1
Specification for precast concrete pipes and fittings for drainage and sewerage
MS 881 1991 MS 881-1 : 1991 Malaysian Standard RACK 1
Part 1: Specification for pipes and fittings with flexible joints and manholes
Specification for precast concrete pipes and fittings for drainage and sewerage
MS 881 1991 MS 881-2 : 1991 Malaysian Standard RACK 1
Part 2: Specification for inspection chambers and street gullies
Page 9 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Specification for precast concrete pipes and fittings for drainage and sewerage
MS 881 1991 MS 881-3 : 1991 Malaysian Standard RACK 1
Part 3: Specification for pipes and fittings with ogee joints
MS 887 1984 MS 887 : 1984 Specification for spike-proof combat boots Malaysian Standard RACK 1
MS 888 1991 MS 888 : 1991 Specification for white Portland cement (First revision) Malaysian Standard RACK 1
Specification for concrete admixtures Part 1: Accelerating admixtures,
MS 922 1984 MS 922-1 : 1984 Malaysian Standard RACK 1
retarding admixtures and water-reducing admixtures
Specification for direct acting indication electrical measuring instruments and
MS 925 1984 MS 925 : 1984 Malaysian Standard RACK 1
their accessories
Code of practice for the installation of fuel gas piping systems and appliances
MS 930 2010 MS 930 : 2010 Malaysian Standard RACK 1
(First revision)
MS 935 1984 MS 935 : 1984 Code of practice for loading guide for oil-immersed transformers Malaysian Standard RACK 1
Specification for classification of materials for the insulation of electrical
MS 938 1984 MS 938 : 1984 Malaysian Standard RACK 1
machinery and apparatus in relation to their thermal stability in service
MS 940 1984 MS 940 : 1984 Specification for classification of degrees of protection provided by enclosures Malaysian Standard RACK 1
Specification for degrees of protection of enclosures for low-voltage
MS 941 1984 MS 941 : 1984 Malaysian Standard RACK 1
switchgear and controlgear
MS 942 1984 MS 942 : 1984 Specification for lighting sets for decorative purposes for indoor use Malaysian Standard RACK 1
MS 943 1984 MS 943 : 1984 Specification for electrical safety requirements for room aerials Malaysian Standard RACK 1
MS 944 1984 MS 944 : 1984 Specification for maximum demand indicators class 1.0 Malaysian Standard RACK 1
MS 945 1984 MS 945 : 1984 Specification for earth and bonding clamps Malaysian Standard RACK 1
MS 946 1984 MS 946 : 1984 Specification for residual current operated protective device Malaysian Standard RACK 1
MS 947 1984 MS 947 : 1984 Specification for photoelectric control units for road lighting Malaysian Standard RACK 1
MS 948 1984 MS 948 : 1984 Specification for factory-built assemblies of switchgear and controlgear Malaysian Standard RACK 1
MS 949 1984 MS 949 : 1984 Code of practice for safety in welding and cutting Malaysian Standard RACK 1
MS 964 1985 MS 964 : 1985 Specification for resin flux cored solder Malaysian Standard RACK 1
Playground equipment : safety performance for public use - specification
MS 966 2017 MS 966: 2017 (Second revision) Malaysian Standard RACK 1
MS 972 1998 MS 972 : 1998 Specification for solid rubber flooring (First revision) Malaysian Standard RACK 1
Code of practice for subsurface investigation, Part 1: For design and
MS 977 1986 MS 977-1 : 1986 Malaysian Standard RACK 1
construction of foundations of buildings
MS 977 1985 MS 977-2 : 1985 Code of practice for subsurface investigation, Part 2: Roads Malaysian Standard RACK 1
MS 978 1985 MS 978 : 1985 Specification for plastics waste pipe and fittings Malaysian Standard RACK 1
Specification for safety signs and colours: colorimetric and photometric
MS 980 1985 MS 980 : 1985 Malaysian Standard RACK 1
properties of materials
MS 981 1985 MS 981 : 1985 Specification for safety signs and colours: colour and design Malaysian Standard RACK 1
MS 983 2000 MS 983 : 2000 Specification for KELUAR signs (Internally illuminated) (Second revision) Malaysian Standard RACK 1
Page 10 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 994 1990 MS 994 : 1990 Specification for water for lead acid batteries Malaysian Standard RACK 1
Specification for rigid poly (vinyl chloride) and related plastic pipe and fitting
MS 1010 1986 MS 1010 : 1986 Malaysian Standard RACK 1
compounds
MS 1017 2012 MS 1017 : 2012 Aluminium framed sliding glass doors - specification (First revision) Malaysian Standard RACK 1
Specification for aluminium framed sliding glass doors Part 1: Single glazed
MS 1017 1986 MS 1017-1 : 1986 Malaysian Standard RACK 1
doors
MS 1020 1986 MS 1020 : 1986 Specification for mineral fibre thermal insulation material Malaysian Standard RACK 1
Guide for construction of electrical equipment for protection against electrical
MS 1021 1986 MS 1021 : 1986 Malaysian Standard RACK 1
shock
MS 1022 1986 MS 1022 : 1986 Specification for stopvalves for water services (Screwdown pattern) Malaysian Standard RACK 1
MS 1023 1986 MS 1023 : 1986 Specification for identification of the contents of industrial gas containers Malaysian Standard RACK 1
Unplasticised polyvinyl chloride (PVC-U) conduit for underground
MS 1034 2013 MS 1034 : 2013 Malaysian Standard RACK 1
telecommunication cables - specification (First revision)
Code of practice for unplasticized PVC pipework for the conveyance of liquid
MS 1035 1986 MS 1035 : 1986 Malaysian Standard RACK 1
under pressure
MS 1037 1986 MS 1037 : 1986 Specification for sulphate-resisting Portland cement Malaysian Standard RACK 1
Specification for alternating current switches of rated voltage above one
MS 1039 1986 MS 1039 : 1986 Malaysian Standard RACK 1
kilovolt
MS 1042 1992 MS 1042-4 : 1992 Code of practice for safety in laboratories Part 4: Ionizing radiations Malaysian Standard RACK 1
MS 1042 1991 MS 1042-6 : 1991 Code of practice for safety in laboratories Part 6: Mechanical aspects Malaysian Standard RACK 1
MS 1042 1986 MS 1042-1 : 1986 Code of practice for safety in laboratories Part 1: General Malaysian Standard RACK 1
MS 1042 1986 MS 1042-2 : 1986 Code of practice for safety in laboratories Part 2: Chemical Malaysian Standard RACK 1
MS 1042 1986 MS 1042-3 : 1986 Code of practice for safety in laboratories Part 3: Microbiology Malaysian Standard RACK 1
MS 1045 1986 MS 1045 : 1986 Methods of measuring drying shrinkage of mortar containing hydraulic cement Malaysian Standard RACK 1
Glossary of welding terms, including terms for brazing, soldering, thermal
MS 1046 1986 MS 1046 : 1986 Malaysian Standard RACK 1
spraying and thermal cutting
Specification for double flanged cast iron wedge gate (sluice) valves for
MS 1049 1986 MS 1049 : 1986 Malaysian Standard RACK 1
waterworks purposes
Soils for civil engineering purposes - test method - Part 6: Consolidation and
MS 1056 2005 MS 1056-6 : 2005 Malaysian Standard RACK 1
permeability tests in hydraulic cells and with pore pressure measurement
Soils for civil engineering purposes - test method - Part 8: Shear strength tests
MS 1056 2005 MS 1056-8 : 2005 Malaysian Standard RACK 1
(effective stress)
MS 1057 1995 MS 1057 : 1995 Specification for adjustable louvre windows (First revision) Malaysian Standard RACK 1
Specification for polyethylene (PE) piping systems for water supply: Part 1:
MS 1058 2002 MS 1058-1 : 2002 Malaysian Standard RACK 1
General (Third revision)
Specification for polyethylene (PE) piping systems for water supply: Part 2:
MS 1058 2002 MS 1058-2 : 2002 Malaysian Standard RACK 1
Pipes (Third revision)
Page 11 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 1059 1986 MS 1059 : 1986 Specification for asbestos - cement sewer pipes, joints and fittings Malaysian Standard RACK 1
MS 1060 1986 MS 1060 : 1986 Specification for mortice locks for use in buildings Malaysian Standard RACK 1
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 1:
MS 1061 1999 MS 1061-1 : 1999 Malaysian Standard RACK 1
Requirements (First revision)
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 2:
MS 1061 1999 MS 1061-2 : 1999 Malaysian Standard RACK 1
Quality control and sampling
Vitrified clay pipes and fittings and pipe joints for drains and sewers : Part 3:
MS 1061 1999 MS 1061-3 : 1999 Malaysian Standard RACK 1
Test methods
MS 1062 1986 MS 1062 : 1986 Specification for bored locks and latches for building Malaysian Standard RACK 1
Guide to modular coordination in buildings: Part 1: General principles (First
MS 1064 2001 MS 1064-1 : 2001 Malaysian Standard RACK 1
revision)
MS 1064-10 : Guide to modular coordination in buildings: Part 10: Coordinating sizes and
MS 1064 2001 Malaysian Standard RACK 1
2001 preferred sizes for reinforced concrete components
Guide to modular coordination in buildings: Part 2: Storey heights and room
MS 1064 2001 MS 1064-2 : 2001 Malaysian Standard RACK 1
heights (First revision)
Guide to modular coordination in buildings: Part 4: Coordinating sizes and
MS 1064 2001 MS 1064-4 : 2001 Malaysian Standard RACK 1
preferred sized for doorsets (First revision)
Guide to modular coordination in buildings: Part 5: Coordinating sizes and
MS 1064 2001 MS 1064-5 : 2001 Malaysian Standard RACK 1
preferred sizes for windowsets
Guide to modular coordination in buildings: Part 6: Coordinating sizes and
MS 1064 2001 MS 1064-6 : 2001 Malaysian Standard RACK 1
preferred sizes for rigid flat sheets (First revision)
Guide to modular coordination in buildings: Part 7: Coordinating sizes and
MS 1064 2001 MS 1064-7 : 2001 Malaysian Standard RACK 1
preferred sizes for tiles
Guide to modular coordination in buildings: Part 8: Coordinating sizes and
MS 1064 2001 MS 1064-8 : 2001 Malaysian Standard RACK 1
preferred sizes for masonry bricks and blocks
Guide to modular coordination in buildings: Part 9: Coordinating sizes and
MS 1064 2001 MS 1064-9 : 2001 Malaysian Standard RACK 1
preferred sizes for cabinets
MS 1064-10:
2001 (Confirmed Guide to modular coordination in buildings: Part 10: Coordinating sizes and
MS 1064 2009 2009) preferred sizes for reinforced concrete components Malaysian Standard RACK 1
Plastics containers for pharmaceutical use - other than parenteral and
MS 1067 2010 MS 1067 : 2010 Malaysian Standard RACK 1
ophthalmic preparations - specification (First revision)
MS 1074 1992 MS 1074 : 1992 Code of practice for the exchange of digital feature coded mapping data Malaysian Standard RACK 1
Code of practice for the installation of buried unplasticised PVC pipework for
MS 1085 1987 MS 1085 : 1987 Malaysian Standard RACK 1
gravity sewers
Code of practice for laying and field pressure testing of asbestos cement
MS 1087 1987 MS 1087 : 1987 Malaysian Standard RACK 1
pipelines
MS 1089 1987 MS 1089 : 1987 Specification for extruded ceramic floor tiles Malaysian Standard RACK 1
Page 12 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 1091 1987 MS 1091-3 : 1987 Methods of test for ceramic tiles Part 3: Determination of modulus of rupture Malaysian Standard RACK 1
Methods of test for ceramic tiles Part 4: Determination of scratch hardness of
MS 1091 1987 MS 1091-4 : 1987 Malaysian Standard RACK 1
surface according to mohs
Methods of test for ceramic tiles Part 8: Determination of chemical resistance
MS 1091 1987 MS 1091-8 : 1987 Malaysian Standard RACK 1
of unglazed tiles
MS 1092 1987 MS 1092 : 1987 Specification for low carbon steel wire rods Malaysian Standard RACK 1
MS 1093 1987 MS 1093 : 1987 Specification for high carbon steel wire rods Malaysian Standard RACK 1
MS 1094 1987 MS 1094 : 1987 Specification for cast iron fittings for asbestos cement pressure pipe Malaysian Standard RACK 1
MS 1095 1987 MS 1095 : 1987 Methods of test for insulation and sheaths of electrical cables Malaysian Standard RACK 1
Code of practice for the use of CNG fuel in internal combustion engines (First
MS 1096 1997 MS 1096 : 1997 Malaysian Standard RACK 1
revision)
MS 1098 1987 MS 1098 : 1987 Safe storage and handling information cards for dangerous goods Malaysian Standard RACK 1
MS 1103 1988 MS 1103 : 1988 Methods for determination of water using Karl Fischer Reagent Malaysian Standard RACK 1
MS 1108 1988 MS 1108 : 1988 Specification for suspension coil springs for automotive use Malaysian Standard RACK 1
Method for representing SI and other units in information processing systems
MS 1134 1989 MS 1134 : 1989 Malaysian Standard RACK 1
with limited character sets
MS 1136 1989 MS 1136 : 1989 Method of test for backsiphonage in water using appliance Malaysian Standard RACK 1
MS 1137 2009 MS 1137 : 2009 Low carbon steel wires - specification (First revision) Malaysian Standard RACK 1
MS 1138 2007 MS 1138-1 : 2007 Prestressing steel - Part 1: General requirements Malaysian Standard RACK 1
MS 1138 2007 MS 1138-2 : 2007 Prestressing steel - Part 2: Cold-drawn wire Malaysian Standard RACK 1
MS 1138 2007 MS 1138-3 : 2007 Prestressing steel - Part 3: Steel bars (Quenched and tempered) Malaysian Standard RACK 1
MS 1138 2007 MS 1138-4 : 2007 Prestressing steel - Part 4: Strand (First revision) Malaysian Standard RACK 1
Specification for information processing, flowchart symbols, rules and
MS 1140 1989 MS 1140 : 1989 Malaysian Standard RACK 1
conventions
MS 1141 1989 MS 1141 : 1989 Specification for portable cable reels for household and similar purposes Malaysian Standard RACK 1
Specification for hard-drawn copper and copper cadmium conductors for
MS 1142 1989 MS 1142 : 1989 Malaysian Standard RACK 1
overhead power transmission purposes
Specification for aluminium alloy stranded conductor for overhead power
MS 1143 1989 MS 1143 : 1989 Malaysian Standard RACK 1
transmission
MS 1144 1998 MS 1144 : 1998 General requirements for electrical accessories (First revision) Malaysian Standard RACK 1
MS 1159 1989 MS 1159 : 1989 Specification for pencils Malaysian Standard RACK 1
MS 1160 1989 MS 1160 : 1989 Specification for school chalks Malaysian Standard RACK 1
MS 1163 1989 MS 1163 : 1989 Specification for rubber erasers Malaysian Standard RACK 1
Specification for pressure regulators and automatic changeover devices for
MS 1165 1989 MS 1165 : 1989 Malaysian Standard RACK 1
liquefied petroleum gases
MS 1177 1990 MS 1177 : 1990 Guide to the determination and use of quality related costs Malaysian Standard RACK 1
Page 13 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 14 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 15 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Guidelines for irradiation of foods Part 8: Irradiation of fresh and frozen red
MS 1265 1992 MS 1265-8: 1992 Malaysian Standard RACK 1
meats and poultry (to control pathogens)
Method of test for flexible cellular materials - combustibility requirements:
MS 1268 1993 MS 1268-1: 1993 Part 1: methods of test for the ignitability by smokers' materials of upholstered Malaysian Standard RACK 1
composites for seating
Information processing - guidelines for the documentation of computers based
MS 1277 1992 MS 1277 : 1992 Malaysian Standard RACK 1
application systems
Information processing systems user documentation and cover information for
MS 1278 1992 MS 1278 : 1992 Malaysian Standard RACK 1
consumer software packages
Specification for rubber seals - water stops for sealing joints in concrete -
MS 1292 1992 MS 1292 : 1992 Malaysian Standard RACK 1
specification of materials
Specification for precast reinforced concrete box culverts Part 1: Small
MS 1293 1992 MS 1293-1: 1992 culverts (not exceeding 1800 mm width and 1800 mm depth with a maximum Malaysian Standard RACK 1
backfill depth of 2 m inclusive pavement, if any)
Wall and floor tiling Part 2: Code of practice for the design and installation of
MS 1294 1993 MS 1294-2: 1993 external ceramic wall tiling and mosaics (including terra cotta and faience Malaysian Standard RACK 1
slabs
Wall and floor tiling Part 3: Code of practice for the design and installation of
MS 1294 1993 MS 1294-3: 1993 Malaysian Standard RACK 1
ceramic floor and mosaics
Wall and floor tiling Part 4: Code of practice for tiling and mosaics in specific
MS 1294 1993 MS 1294-4: 1993 Malaysian Standard RACK 1
conditions
Wall and floor tiling Part 1: Code of practice for the design and installation of
MS 1294 1992 MS 1294-1: 1992 Malaysian Standard RACK 1
internal ceramic wall tiling and mosaics in normal conditions
MS 1296 1992 MS 1296 : 1992 Specification for fibre cement flat sheets Malaysian Standard RACK 1
MS 1297 1992 MS 1297 : 1992 Specification for fire and burglary resistant office safes Malaysian Standard RACK 1
MS 1313 1993 MS 1313: 1993 Code of practice on large prefabricated panels Malaysian Standard RACK 1
Recommended practice for radiographic examination of fusion welded joints
MS 1317 1993 MS 1317-1: 1993 Part 1: Fusion welded butt joints in steel plates up to and including 50 mm Malaysian Standard RACK 1
thick
Recommended practice for radiographic examination of fusion welded joints
MS 1317 1993 MS 1317-2: 1993 Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to Malaysian Standard RACK 1
and including 200 mm in thickness
Code of practice for cathodic protection Part 1: Code of practice for land and
MS 1347 1994 MS 1347-1: 1994 Malaysian Standard RACK 1
marine applications
MS 1350 1994 MS 1350: 1994 Specification for natural mineral water Malaysian Standard RACK 1
MS 1368 1994 MS 1368: 1994 Information processing - Jawi character set for information interchange Malaysian Standard RACK 1
MS 1380 1995 MS 1380: 1995 Specification for precast concrete paving blocks Malaysian Standard RACK 1
MS 1387 1995 MS 1387: 1995 Specification for ground granulated blastfurnace slag for use with portland Malaysian Standard RACK 1
Page 16 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
cement
MS 1389 1995 MS 1389: 1995 Specification for portland blastfurnace cement Malaysian Standard RACK 1
MS 1390 1995 MS 1390: 1995 Specification for glass reinforced polyester panels & panel water tanks Malaysian Standard RACK 1
MS 1396 1996 MS 1396: 1996 Specification for rerrulers Malaysian Standard RACK 1
Code of practice for sanitary system in buildings - Part 1: Design (First
MS 1402 2006 MS 1402-1: 2006 Malaysian Standard RACK 1
revision)
Code of practice for sanitary system in buildings - Part 2: Installation (First
MS 1402 2006 MS 1402-2: 2006 Malaysian Standard RACK 1
revision)
Code of practice for sanitary system in buildings - Part 3: Testing and
MS 1402 2006 MS 1402-3: 2006 Malaysian Standard RACK 1
commissioning (First revision)
Code of practice for sanitary system in buildings - Part 4: Operation and
MS 1402 2006 MS 1402-4: 2006 Malaysian Standard RACK 1
maintenance (First revision)
MS 1402 1996 MS 1402 : 1996 Code of practice for sanitary system in buildings Malaysian Standard RACK 1
MS 1403 1996 MS 1403: 1996 Electricity generating sets portable (up to 5kW) Malaysian Standard RACK 1
Fire detection and alarm system for building Part 4: Specification for control
MS 1404 1996 MS 1404-4: 1996 Malaysian Standard RACK 1
and indicationf equipment
MS 1405 2008 MS 1405: 2008 Coding systems for plastics products (First revision) Malaysian Standard RACK 1
Measurement of water flow in closed conduits - meters for cold portable water
MS 1417 1997 MS 1417: 1997 Malaysian Standard RACK 1
Part 1: Specification
Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure
MS 1419-2-6:
MS 1419 2007 applications - Part 2: Methods of test- Section 6: Method of determining the Malaysian Standard RACK 1
2007
suitability of connection threads of BSP form
Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure
MS 1419-2-7:
MS 1419 2007 applications - Part 2: Methods of test- Section 7: Method for hydrostatic Malaysian Standard RACK 1
2007
pressure testing of fittings
Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure
MS 1419-2-8:
MS 1419 2007 applications - Part 2: Methods of test- Section 8: Method for high temperature Malaysian Standard RACK 1
2007
stress-relief testing of fittings
Specification for Acrtlonitrile Butadiene Styrene (ABS) pipes and fittings for
MS 1419 1998 MS 1419-4: 1998 Malaysian Standard RACK 1
pressure applications Part 4: Guides for installation of ABS pipe systems
Specification for Acrtlonitrile Butadiene Styrene (ABS) pipes and fittings for
MS 1419 1997 MS 1419-3: 1997 pressure applications Part 3: Solvent cement and priming (cleaning) fluids for Malaysian Standard RACK 1
use with ABS pipes and fittings
Acrylonitrile Butadiene Styrene (ABS) piping systems for pressure
MS 1419-2-5:
MS 1419 2007 applications - Part 2: Methods of test - Section 5: Method for high temperature Malaysian Standard RACK 1
2007
testing of pipe
Specification for acrylonitrile butadiene styrene (ABS) pipes and fittings for
MS 1419 1997 MS 1419-1: 1997 Malaysian Standard RACK 1
presure applications Part 1: Pipes
Page 17 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Specification for acrylonitrile butadiene styrene (ABS) pipes and fittings for
MS 1419 1997 MS 1419-2: 1997 Malaysian Standard RACK 1
presure applications Part 2: Solvent cement fittings
Residual current operated circuit - breakers without integral overcurrent
MS 1426 1997 MS 1426: 1997 Malaysian Standard RACK 1
protection for household and similar uses (RCCB's) Part 1: General rules
Residual current operated circuit - breakers without integral overcurrent
MS 1426-2-1:
MS 1426 1997 protection for household and similar uses (RCCB's) Part 2-1: Applicability of Malaysian Standard RACK 1
1997
the general rules to RCCB's functionally dependent of line voltage
Residual current operated circuit - breakers without integral overcurrent
MS 1426-2-2:
MS 1426 1997 protection for household and similar uses (RCCB's) Part 2-2: Applicability of Malaysian Standard RACK 1
1997
the general rules to RCCB's functionally dependent on line voltage
Specification for general purpose fude links for domestic and similar purposes
MS 1428 1997 MS 1428: 1997 Malaysian Standard RACK 1
(primarily for use in plugs)
Low voltage switchgear and controlgear assemblies : Part 1: Type-tested and
MS 1445 1998 MS 1445-1: 1998 Malaysian Standard RACK 1
partially type-tested assemblies
Low voltage switchgear and controlgear assemblies : Part 1: Particular
requirements for low voltage switchgear and controlgear assemblies intended
MS 1445 1998 MS 1445-3: 1998 Malaysian Standard RACK 1
to be installaed in places where unskilled persons have access for their use -
distribution boards
Fixed firefighting systems - Hose systems Part 1: Hose reels with semi-rigid
MS 1447 2006 MS 1447-1: 2006 Malaysian Standard RACK 1
hose
Fixed firefighting systems - Hose systems Part 2: Hose systems with lay-flat
MS 1447 2006 MS 1447-2: 2006 Malaysian Standard RACK 1
hose
Fixed firefighting systems - Hose systems Part 3: Maintenance of hose reels
MS 1447 2006 MS 1447-3: 2006 Malaysian Standard RACK 1
with semi-rigid hose and hose systems with lay-flat hose (First revision)
MS 1447 1999 MS 1447 : 1999 Specification for fixed firefighting systems - Hose reels with semi-rigid hose Malaysian Standard RACK 1
Code of practice on resistibility of telecommunication equipment to
MS 1460 1999 MS 1460 : 1999 Malaysian Standard RACK 1
overvoltages and overcurrents
MS 1461 1999 MS 1461: 1999 Specification for draw off taps with metal bodies for water services Malaysian Standard RACK 1
MS 1462-4-1: Metal scaffolding Part 4: Temporary works equipement - Section 1: Scaffolds -
MS 1462 2013 Malaysian Standard RACK 1
2013 performance requirements and general design
MS 1462-4-2: Metal scaffolding Part 4: Temporary works equipment - Section 2: Information
MS 1462 2013 Malaysian Standard RACK 1
2013 on materials
Metal scaffolding Part 1: Prefabricated scaffolds - Specification for steel frame
MS 1462 2012 MS 1462-1: 2012 Malaysian Standard RACK 1
scaffolding (First revision)
Metal scaffolding Part 3: Prefabricated scaffoldings - Section 2: Particular
MS 1462-3-2:
MS 1462 2012 methods of structural design for steel and aluminium modular system Malaysian Standard RACK 1
2012
scaffoldings
Page 18 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 1462-2-3: Metal scaffolding Part 2: Tubular (Tube and Coupler) scaffolds - Section 2:
MS 1462 2011 Malaysian Standard RACK 1
2011 Specification for aluminium tubes
MS 1462-3-1: Metal scaffolding Part 3: Prefabricated scaffolds - Section 1: Specification for
MS 1462 2011 Malaysian Standard RACK 1
2011 steel and aluminium modular system scaffolding
MS 1462-2-1: Metal scaffolding Part 2: Tubular (tube and coupler) scaffolds Section 1:
MS 1462 2010 Malaysian Standard RACK 1
2010 Specification for steel tubes
MS 1462-2-2: Metal scaffolding Part 2: Tubular (Tube and Coupler) scaffolds - Section 2:
MS 1462 2010 Malaysian Standard RACK 1
2010 Specification for aluminium tubes
MS 1464 1999 MS 1464: 1999 Vocabulary on Gas Cylinder Malaysian Standard RACK 1
MS 1471 1999 MS 1471-1: 1999 Vocabulary on Fire Protection Part 1: General terms and phenomena of fire Malaysian Standard RACK 1
MS 1471 1999 MS 1471-2: 1999 Vocabulary on Fire Protection Part 2: Structural fire protection Malaysian Standard RACK 1
MS 1471 1999 MS 1471-4: 1999 Vocabulary on Fire Protection Part 4: Fire extinction equipment Malaysian Standard Rack 1
MS 1471 1999 MS 1471-5: 1999 Vocabulary on Fire Protection Part 5: Smoke control Malaysian Standard RACK 1
MS 1471 1999 MS 1471-6: 1999 Vocabulary on Fire Protection Part 6: Evacuation and means of escape Malaysian Standard RACK 1
Vocabulary on Fire Protection Part 7: Explosion detection and surpression
MS 1471 1999 MS 1471-7: 1999 Malaysian Standard RACK 1
means
Vocabulary on Fire Protection Part 8: Terms specific to fire fighing rescue
MS 1471 1999 MS 1471-8: 1999 Malaysian Standard RACK 1
services and handling hazardous materials
MS 1471 1999 MS 1471-3: 1999 Vocabulary on Fire Protection Part 3: Fire detection and alarm Malaysian Standard RACK 1
Code of practice for fire precautions in the design of buildings - smoke control
MS 1472 1999 MS 1472 : 1999 Malaysian Standard RACK 1
in protected escape routes using pressurisation
Cylinder for permanent gases - Inspection at time of filling (ISO 10463: 1993,
MS 1474 1999 MS 1474: 1999 Malaysian Standard RACK 1
IDT)
Cylinder for liquefied gases (exclusing acetylene and LPG) - Inspection at time
MS 1475 1999 MS 1475: 1999 Malaysian Standard RACK 1
of filling (ISO 11113: 1995, IDT)
MS 1477 2008 MS 1477: 2008 Plastics - Polyethylene film and sheeting - Specification (First Revision) Malaysian Standard RACK 1
Plastics - Low density polyethylene films for general use and packaging
MS 1478 2008 MS 1478: 2008 Malaysian Standard RACK 1
applications - Specification (First revision)
Multiple payment order message (paymul) for the payment of customs duty
MS 1481 2001 MS 1481: 2001 Malaysian Standard RACK 1
(First revision)
Banking status message (BANSTA) for the payment of customs duty (First
MS 1482 2001 MS 1482: 2001 Malaysian Standard RACK 1
revision)
Multiple credit advice message (cremul) for the payment of customs duty (First
MS 1483 2001 MS 1483: 2001 Malaysian Standard RACK 1
revision)
Multiple debit advice message (debmul) for the payment of customs duty (First
MS 1484 2001 MS 1484: 2001 Malaysian Standard RACK 1
revision)
Page 19 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 20 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 21 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 1539 2010 MS 1539-6: 2010 Specification For Portable Fire Extinguishers - Part 6: Specification For Small Malaysian Standard RACK 1
Disposable Fire Extinguishers Of Aerosol Type
MS 1539 2010 MS 1539-8: 2010 Specification For Portable Fire Extinguishers - Part 8: Chemical Powders (First Malaysian Standard RACK 1
Revision)
MS 1539 2003 MS 1539-3: 2003 Specification For Portable Fire Extinguishers Part 3 : Selection And Malaysian Standard RACK 1
Installation Code Of Practice (First Revision)
MS 1539 2002 MS 1539-1: 2002 Specification For Portable Fire Extinguishers: Part 1: Construction And Malaysian Standard RACK 1
Testing Methodology
Specification for the material, marking and dimensions of crimp type cable
MS 1540 2002 MS 1540: 2002 Malaysian Standard RACK 1
lugs for use with copper conductors in low voltage applications
MS 1552 2002 MS 1552-1: 2002 Specification for raised access floor system: Part 1: General requirements Malaysian Standard RACK 1
MS 1553 2002 MS 1553: 2002 Code of practice on wind loading for building structure Malaysian Standard RACK 1
MS 1590 2003 MS 1590: 2003 Carbon dioxide extinguishing systems - design and installation Malaysian Standard RACK 1
Electrical apparatus for explose gas atmospheres - Part 16: Artificial
MS 1591 2003 MS 1591: 2003 Malaysian Standard RACK 1
ventilation for the protection of analyser(s) houses
Electrical apparatus for explose gas atmospheres - Part 20: Data for flammable
MS 1592 2003 MS 1592: 2003 Malaysian Standard RACK 1
gases and vapours relating to the use of electrical apparatus
Specification for fire resistant doorsets Part 1: Design requirements and
MS 1601 2009 MS 1601-1: 2009 Malaysian Standard RACK 1
variation from the tested specimen
Specification for fire resistant doorsets Part 3: Code of practice for installation
MS 1601 2009 MS 1601-3: 2009 Malaysian Standard RACK 1
of fire resistant doorsets
Specification for fire resistant doorsets Part 4: Requirements and method of
MS 1601 2009 MS 1601-4: 2009 Malaysian Standard RACK 1
determining the performance of mortice locksets
Page 22 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 1910 2006 MS 1910 : 2006 Fixed Firefighting Systems Automatic Sprinkler Systems Design, Malaysian Standard RACK 1
Installation And Maintenance
Fixed fire fighting systems - Automatic sprinkler systems - Design, installation
MS 1910 2017 MS 1910: 2017 and maintenance (First revision) Malaysian Standard RACK 1
MS 1936 2007 MS 1936 : 2007 Electrical installations of building - Guide to MS IEC 60364 Malaysian Standard RACK 1
Page 23 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 1963 2007 MS 1963: 2007 Air quality - determination of odour concentration by dynamic olfactometry Malaysian Standard RACK 1
MS 1979 2007 MS 1979: 2007 Electrical installations of building - code of practice Malaysian Standard RACK 1
MS 2015 2006 MS 2015-1 : 2006 Public toilets - Part 1: Minimum design criteria Malaysian Standard RACK 2
MS 2015 2006 MS 2015-3: 2006 Public toilets - Part 3: Rating criteria Malaysian Standard RACK 1
MS 2015 2006 MS 2015-4: 2006 Public toilets - Part 4: Code of practice for maintenance Malaysian Standard RACK 1
MS 2021 2006 MS 2021: 2006 Safety rules for the construction and installation of electric lifts Malaysian Standard RACK 1
Scheduled waste - sampling technical guide - Part 2: Description of media and
MS 2070 2008 MS 2070-2: 2008 Malaysian Standard RACK 1
device selection guide
MS 2072 2008 MS 2072: 2008 Guidelines for developing and implementing early action for site remediation Malaysian Standard RACK 1
MS 2076 2008 MS 2076: 2008 Practice for sampling with a scoop Malaysian Standard RACK 1
Radiant barrier and reflective insulation building materials - Specification
MS 2095 2014 MS 2095 : 2014 Malaysian Standard RACK 1
(First revision)
Electromagnetic compatibility - Environment - Overvoltages on public
MS 2230 2009 MS 2230: 2009 Malaysian Standard RACK 1
eletricity distribution networks
Guidelines for limiting exposure to time-varyinng electric, magnetic and
MS 2232 2009 MS 2232-1: 2009 Malaysian Standard RACK 1
electromagnetic fields - Part 1: For frequency up to 3kHz
MS 2236 2009 MS 2236: 2009 Speed hump - specification for materials, design and installation Malaysian Standard RACK 1
Specification for deformed and plain carbon-steel bars for concrete
MS 2246 2009 MS 2246: 2009 Malaysian Standard RACK 1
reinforcement
MS 2247 2015 MS 2247: 2015 Carbon steels for machine structural use - specification Malaysian Standard RACK 1
Welding and allied processes - vocabulary- Part 1: Metal welding processes
MS 2277 2009 MS 2277-1: 2009 Malaysian Standard RACK 1
(ISO 857-1: 1998, MOD)
Performance standards in building - definition and calculation of area and
MS 2279 2010 MS 2279: 2010 Malaysian Standard RACK 1
space indicators (ISO 9836: 1992, MOD)
MS 2280 2010 MS 2280: 2010 Aggregates for mortar: specification Malaysian Standard RACK 1
MS 2282 2014 MS 2282-2 : 2014 Masonry units - Specification - Part 2: Calcium silicate masonry units Malaysian Standard RACK 1
Plastics piping systems for hot and cold water installations - polypropylene
MS 2286 2012 MS 2286-2: 2012 Malaysian Standard RACK 1
(PP) - Part 2: Pipes (ISO 15874-1: 2003, AMD. 1: 2007, MOD)
Plastics piping systems for hot and cold water installations - polypropylene
MS 2286 2012 MS 2286-3: 2012 Malaysian Standard RACK 1
(PP) - Part 3: Fittings (ISO 15874-3: 2003, MOD)
Plastics piping systems for hot and cold water installations - polypropylene
MS 2286 2012 MS 2286-7: 2012 Malaysian Standard RACK 1
(PP) - Part 7: Guidance for the assessment of conformity
Plastics piping systems for hot and cold water installations - polypropylene
MS 2286 2010 MS 2286-1: 2010 Malaysian Standard RACK 1
(PP) - Part 1: General (ISO 15874-1: 2003, AMD. 1: 2007, MOD)
MS 2289 2010 MS 2289: 2010 Aluminium an aluminium allay - extruded shapes Malaysian Standard RACK 1
MS 2298 2010 MS 2298: 2010 Rolles carbon steel for cold - finished steel bars Malaysian Standard RACK 1
MS 2318 2012 MS 2318:2012 Demolition of buildings - code of practice (First revision) Malaysian Standard RACK 1
Page 24 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 2318: 2010
MS 2318 2010 Demolition of buildings - code of practice (First revision) Malaysian Standard RACK 1
(P)
MS 2319 2010 MS 2319: 2010 Wire rods for core wire of covered electrode Malaysian Standard RACK 1
Fluids for electrotechnical applications - unused mineral insulating oils for
MS 2322 2010 MS 2322: 2010 Malaysian Standard RACK 1
transformers and switchgear
Method of specifying thermoplastics injection mouldings - Part 1: General
MS 2324 2010 MS 2324-1: 2010 Malaysian Standard RACK 1
requirements
Method of specifying thermoplastics injection mouldings - Part 2: Additional
MS 2324 2010 MS 2324-2: 2010 Malaysian Standard RACK 1
requirements for polycarbonate, polymide and polyethlene mouldings
Ergonomics of the thermal environment - methods for the assesesment of
MS 2326 2010 MS 2326: 2010 Malaysian Standard RACK 1
human responses to contract with surfaces at moderate temperature
Ergonomics of the thermal environment - application of Malaysian Standards
MS 2327 2010 MS 2327: 2010 Malaysian Standard RACK 1
to people with special requirements
Ergonomics of the thermal environment - evaluation of thermal environments
MS 2328 2010 MS 2328-1: 2010 Malaysian Standard RACK 1
in vehicled - Part 1: Principles and methods for asessesment of thermal stress
Ease of operation of everyday products - walk up and use products - test
MS 2329 2010 MS 2329: 2010 Malaysian Standard RACK 1
method
Plastics film and sheeting - determination of average thickness of a sample and
MS 2330 2010 MS 2330: 2010 average thickness and yield of a roll, by gravimetric techniques (Gravimetric Malaysian Standard RACK 1
thickness) (ISO 4591: 1992, MOD)
Plastics - thermosetting moulding materials - determination of shrinkage (ISO
MS 2331 2010 MS 2331: 2010 Malaysian Standard RACK 1
2577: 2007, MOD)
MS 2338 2010 MS 2338: 2010 Steel fibres for concrete - definitions, specification and conformity Malaysian Standard RACK 1
MS 2361 2010 MS 2361: 2010 Recovered waste oil - specification Malaysian Standard RACK 1
MS 2363 2010 MS 2363: 2010 Work in tunnelling - code of practice Malaysian Standard RACK 1
MS 2382 2011 MS 2382: 2011 Factory made wrought butt welding fittings Malaysian Standard RACK 1
MS 2394 2011 MS 2394-1: 2011 Building and civil engineering - Vocabulary Part 1: General terms Malaysian Standard RACK 1
Vinyl (PVC) Coated steel wire and welded wire fabric for reinforcement -
MS 2412 2011 MS 2412: 2011 Malaysian Standard RACK 1
specification
MS 2414 2011 MS 2414: 2011 Steel wire and wire products for fences - steel wire chain link fencing Malaysian Standard RACK 1
MS 2426 2011 MS 2426: 2011 Planning and designing for basement parking - code of practice Malaysian Standard RACK 1
MS 2427 2011 MS 2427: 2011 Welding - Guidelines for a metallic materials grouping system Malaysian Standard RACK 1
Specification and qualification of welding procedures for metallic materials -
MS 2428 2011 MS 2428: 2011 Qualification based on tested welding consumables (First revision) (ISO Malaysian Standard RACK 1
15610:2003,MOD)
Specification and qualification of welding procedures for metallic materials -
MS 2429 2011 MS 2429: 2011 Qualification by adoption of a standard welding procedure (First revision) Malaysian Standard RACK 1
(ISO 15612:2004,MOD)
Page 25 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 2439 2012 MS 2439: 2012 Dynamic weather resistance of roof -Test method Malaysian Standard RACK 1
Design, installation, maintenance and inspection of PV mounting system -
MS 2440 2012 MS 2440: 2012 Malaysian Standard RACK 1
code of practice
On site sewage treatment units - Part 2: Packaged prefabricated small sewage
MS 2441 2014 MS 2441-2 : 2014 Malaysian Standard RACK 1
treatment system specifications
MS 2449 2012 MS 2449: 2012 Performance rating of water-chilling packages using vapor compression cycle Malaysian Standard RACK 1
MS 2476 2012 MS 2476: 2012 Guidelines for disposal of laboratory chemical wastes (LCW) Malaysian Standard RACK 1
MS 2478 2012 MS 2478: 2012 Traffic control equipment - performance of signal heads Malaysian Standard RACK 1
MS 2479 2012 MS 2479-1: 2012 Oil tempered wire - Part 1: Mechanical springs Malaysian Standard RACK 1
MS 2479 2012 MS 2479-2: 2012 Oil tempered wire - Part 1: Valve springs Malaysian Standard RACK 1
MS 2480 2012 MS 2480-1: 2012 Hard drawn steel wires - Part 1: Principally for static load Malaysian Standard RACK 1
MS 2480 2012 MS 2480-2: 2012 Hard drawn steel wires - Part 2: Principally for dynamic load Malaysian Standard RACK 1
Test method for assessment of the ignitability of upholstered seating by
MS 2507 2012 MS 2507: 2012 smouldering and flaming ignition sources Malaysian Standard RACK 1
Plastic piping systems for hot and cold water installations - Polyethylene of
MS 2508 2012 MS 2508-1: 2012 raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009, Malaysian Standard RACK 1
MOD)
Plastic piping systems for hot and cold water installations - Polyethylene of
MS 2508 2012 MS 2508-2: 2012 raised temperature resistance (PE-RT) - Part 1: Pipes (ISO 22391-2:2009, Malaysian Standard RACK 1
MOD)
Plastic piping systems for hot and cold water installations - Polyethylene of
MS 2508 2012 MS 2508-3: 2012 raised temperature resistance (PE-RT) - Part 1: Fittings (ISO 22391-3:2009, Malaysian Standard RACK 1
MOD)
Plastic piping systems for hot and cold water installations - Polyethylene of
MS 2508 2012 MS 2508-7: 2012 raised temperature resistance (PE-RT) - Part 7: Guidance for the assesment of Malaysian Standard RACK 1
conformity (ISO/TS 22391-7:2011, MOD)
MS 2526-10:
MS 2526 2014 Urban stormwater management - Part 10: Gross pollutant traps Malaysian Standard RACK 1
2014
MS 2526-11:
MS 2526 2014 Urban stormwater management - Part 11: Water quality ponds and wetlands Malaysian Standard RACK 1
2014
MS 2526-12:
MS 2526 2014 Urban stormwater management - Part 12: Erosion and sediment control Malaysian Standard RACK 1
2014
MS 2526 2014 MS 2526-4: 2014 Urban stormwater management - Part 4: Roof and property drainage Malaysian Standard RACK 1
MS 2526 2014 MS 2526-5: 2014 Urban stormwater management - Part 5: On site detention Malaysian Standard RACK 1
MS 2526 2014 MS 2526-6: 2014 Urban stormwater management - Part 6: Rainwater harvesting Malaysian Standard RACK 1
MS 2526 2014 MS 2526-7: 2014 Urban stormwater management - Part 7: Detention ponds Malaysian Standard RACK 1
MS 2526 2012 MS 2526-1: 2012 Urban stormwater management - Part 1: Design acceptance criteria Malaysian Standard RACK 1
MS 2526 2012 MS 2526-2: 2012 Urban stormwater management - Part 2: Quantity design fundamentals Malaysian Standard RACK 1
Page 26 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS 2526 2012 MS 2526-3: 2012 Urban stormwater management - Part 3: Quantity design fundamentals Malaysian Standard RACK 1
Plastic piping system for non pressure underground drainage and sewerage -
MS 2548 2014 MS 2548-1: 2014 Structured wall piping systems of unplasticised poly (vinyl chloride) (PVC-U), Malaysian Standard RACK 1
polypropylene (PP) and polyethylene (PE) Part 1: Dimensions
Plastic piping system for non pressure underground drainage and sewerage -
Structured wall piping systems of unplasticised poly (vinyl chloride) (PVC-U),
MS 2548 2014 MS 2548-2: 2014 Malaysian Standard RACK 1
polypropylene (PP) and polyethylene (PE) Part 1: Technical delivery
specifications
MS 2558 2014 MS 2558: 2014 Safety and health signage used in the workplace - Specification (First revision) Malaysian Standard RACK 1
MS 2562 2014 MS 2562: 2014 Moulded expended perlite block and pipe thermal insulation - specification Malaysian Standard RACK 1
MS 2577 2014 MS 2577 : 2014 Architecture and asset management of masjid - code of practice Malaysian Standard RACK 1
Code of practice on energy efficiency and conservation for industrial electrical
MS 2578 2014 MS 2578-1 : 2014 Malaysian Standard RACK 1
equipment - Part 1: Fans
Code of practice on energy efficiency and conservation for industrial electrical
MS 2578 2014 MS 2578-3 : 2014 Malaysian Standard RACK 1
equipment - Part 3: Motors
MS 2581 2014 MS 2581 : 2014 Production of biogas - code of practice Malaysian Standard RACK 1
MS 2586-10 :
MS 2586 2015 Smoke and heat control systems - Part 10: Power supplies Malaysian Standard RACK 1
2015
MS 2586 2015 MS 2586-7 : 2015 Smoke and heat control systems - Part 7: Smoke duct sections Malaysian Standard RACK 1
MS 2592 2015 MS 2592: 2015 Bead wire - specification Malaysian Standard RACK 1
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 1:
MS 2596 2014 MS 2596-1: 2014 Malaysian Standard RACK 1
Specification (First revision)
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 2:
MS 2596 2014 MS 2596-2: 2014 Malaysian Standard RACK 1
Test methods (First revision)
Concrete roofing tiles and fittings for roof covering and wall cladding - Part 3:
MS 2596 2014 MS 2596-3: 2014 Malaysian Standard RACK 1
Installation for roof covering (First revision)
MS 2602 2015 MS 2602 : 2015 Compressed air work in tunnelling - code of practice Malaysian Standard RACK 1
MS 2616 2015 MS 2616: 2015 Fixed fire fighting systems - Fire pumps Malaysian Standard RACK 1
MS 2662 2017 MS 2662: 2017 Connection of distributed generation to distribution network - Code of practice Malaysian Standard RACK 1
Tint film on glazing of road vehicles - Methods and requirements of light
MS 2669 2017 MS 2669: 2017 transmittance, ultraviolet transmittance, total solar energy transmittance and Malaysian Standard RACK 1
other related factors
Page 27 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 28 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 29 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Functional safety - safety instrumented systems for the process industry sector
MS 61511-1:
MS 61511 2011 - Part 1: Framework, definitions, system, hardware and software requirements Malaysian Standard RACK 1
2011
(IEC 61511-1: 2003,MOD)
Functional safety - safety instrumented systems for the process industry sector
MS 61511-2:
MS 61511 2011 - Part 2: Guidelines for the application of IEC 61511-1 (IEC 61511-2: Malaysian Standard RACK 1
2011
2003,MOD)
Functional safety - safety instrumented systems for the process industry sector
MS 61511-3:
MS 61511 2011 - Part 2: Guidance for the determination of the required safety integrity levels Malaysian Standard RACK 1
2011
(IEC 61511-3: 2003,MOD)
Electricity metering equipment (a.c.) - General requirements, tests and test
MS 62052-11:
MS 62052 2009 conditions - Part 11: Metering equipment ( Second revision) (IEC 62052-11: Malaysian Standard RACK 1
2009
2003, MOD)
Electricity metering equipment (a.c.) - General requirements, tests and test
MS 62052-21:
MS 62052 2009 conditions - Part 21: Tariff and load control equipment ( Second revision) (IEC Malaysian Standard RACK 1
2009
62052-21: 2004, MOD)
Electricity metering equipment (a.c.) - Particular requirements - Part 11:
MS 62053-11:
MS 62053 2009 Electromechanical meters for active energy (Classes 0,5,1 and 2)( Second Malaysian Standard RACK 1
2009
revision) (IEC 62053-11: 2003, MOD)
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static
MS 62053-21:
MS 62053 2009 meters for active energy (Classes 1 and 2) ( Second revision) (IEC 62053-21: Malaysian Standard RACK 1
2009
2003, MOD)
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static
MS 62053-22:
MS 62053 2009 meters for active energy (Classes 0, 2 S and 0,5 S) ( Second revision) (IEC Malaysian Standard RACK 1
2009
62053-22: 2003, MOD)
Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static
MS 62053-23:
MS 62053 2009 meters for active energy (Classes 2 and 3) ( Second revision) (IEC 62053-23: Malaysian Standard RACK 1
2009
2003, MOD)
Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse
MS 62053-31:
MS 62053 2009 output devices for electromechanical and electronic meters (Two Wires Only) Malaysian Standard RACK 1
2009
(Second revision) (IEC 62053-31: 1998, MOD)
Electricity metering equipment (a.c.) - Particular requirements - Part 61: Power
MS 62053-61:
MS 62053 2009 consumption and voltage requirements (Second revision) (IEC 62053-61: Malaysian Standard RACK 1
2009
1998, MOD)
Electricity metering equipment (a.c.) - Tariff and load control - Part 21:
MS 62054-21:
MS 62054 2009 Particular requirements for time switches (Second revision) (IEC 62054-21: Malaysian Standard RACK 1
2009
2004, MOD)
MS 62055-21: Electricity metering - payment systems - Part 21: Framework for
MS 62055 2011 Malaysian Standard RACK 1
2011 standardisation
MS 62059 2009 MS 62059-11: Electricity metering equipment - Dependability - Part 11: General concepts Malaysian Standard RACK 1
Page 30 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
2009
MS 62257-1: Recommendation for small renewable energy and hybrid systems for rural
MS 62257 2009 Malaysian Standard RACK 1
2009 electrification - Part 1: General introduction to rural electrification
MS 62257-2: Recommendation for small renewable energy and hybrid systems for rural
MS 62257 2009 Malaysian Standard RACK 1
2009 electrification - Part 2: From requirements to a range of electrification systems
MS 62257-3: Recommendation for small renewable energy and hybrid systems for rural
MS 62257 2009 Malaysian Standard RACK 1
2009 electrification - Part 3: Project development and management
MS 62257-4: Recommendation for small renewable energy and hybrid systems for rural
MS 62257 2009 Malaysian Standard RACK 1
2009 electrification - Part 4: System selection and design
Power systems management and associated information exchange - Data and
MS 62351-3:
MS 62351 2012 communications security - Part 3: Communication network and system Malaysian Standard RACK 1
2012
security - Profiles including TCP/IP (IEC 62351-3: 2007, MOD)
MS 62351-4: Power systems management and associated information exchange - Data and
MS 62351 2015 Malaysian Standard RACK 1
2015 communications security - Part 4: Profiles including MMS
MS 62351-6: Power systems management and associated information exchange - Data and
MS 62351 2015 Malaysian Standard RACK 1
2015 communications security - Part 6: Security for IEC 61850
MS 62471-2: Photobiological safety of lamps and lamp systems - Part 2: Guidance on
MS 62471 2014 Malaysian Standard RACK 1
2014 manufacturing requirements relating to non laser optical radiation safety
MS 62504 2012 MS 62504: 2012 General lighting - LEDs and LED modules - Terms and definitions Malaysian Standard RACK 1
MS 62722-1:
MS 62722 2012 Luminaire performance - Part 1: General requirements Malaysian Standard RACK 1
2012
MS 62722-2-1:
MS 62722 2012 Luminaire performance - Part 2-1: Particular requirements for LED luminaires Malaysian Standard RACK 1
2012
MS EN 932-3: Tests for general properties of aggregates - Part 3: Procedure and terminology
MS EN 934 2011 Malaysian Standard RACK 1
2011 for simplified petrographic description
MS EN 934-1: Admixtures for concrete, mortar and grout - Part 1: Common requirements
MS EN 934 2012 Malaysian Standard RACK 1
2012 (First revision)
MS EN 934-2: Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures -
MS EN 934 2012 Malaysian Standard RACK 1
2012 Definitions, requirements, conformity, marking and labelling (First revision)
Admixtures for concrete, mortar and grout - Part 3: Admixtures for monsonry
MS EN 934-3:
MS EN 934 2012 mortar - Definitions, requirements, conformity, marking and labelling (First Malaysian Standard RACK 1
2012
revision)
Admixtures for concrete, mortar and grout - Part 4: Admixtures for
MS EN 934-4:
MS EN 934 2012 prestressing tendons - Definitions, requirements, conformity, marking and Malaysian Standard RACK 1
2012
labelling (First revision)
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed
MS EN 934-5:
MS EN 934 2012 concrete - Definitions, requirements, conformity, marking and labelling (First Malaysian Standard RACK 1
2012
revision)
Page 31 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS EN 934-6: Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity
MS EN 934 2012 Malaysian Standard RACK 1
2012 control and evaluation of conformity (First revision)
Mixing water for concrete - specification for sampling, testing and assessing
MS EN 1008:
MS EN 1008 2010 the suitability of water, including water recovered from processes in the Malaysian Standard RACK 1
2010
concrete industry, as mixing water for concrete (Second revision)
MS EN 1990:
MS EN 1990 2010 Eurocode - Basis of structural design Malaysian Standard RACK 1
2010
MS EN 1990:
MS EN 1990 2010 Malaysia National Annex to Eurocode - Basis of structural design Malaysian Standard RACK 1
2010
MS EN 1991-1-1: Eurocode 1: Actions on structures - Part 1-1: General actions - Densities, self
MS EN 1991 2010 Malaysian Standard RACK 1
2010 weight, imposed loads for buildings
MS EN 1991-1-1:
Malaysia National Annex to Eurocode 1: Actions on structures - Part 1-1:
MS EN 1991 2010 2010 (National Malaysian Standard RACK 1
General actions - Densities, self weight, imposed loads for buildings
Annex)
MS EN 1992-1-1: Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules
MS EN 1992 2010 Malaysian Standard RACK 1
2010 for buildings
MS EN 1992-1-1:
Malaysia National Annex to Eurocode 2: Design of concrete structures - Part
MS EN 1992 2010 2010 (National Malaysian Standard RACK 1
1-1: General rules and rules for buildings
Annex)
MS EN 1993-1-1: Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for
MS EN 1993 2010 Malaysian Standard RACK 1
2010 buildings
MS EN 1993-1-1:
Malaysia National Annex to Eurocode 3: Design of steel structures - Part 1-1:
MS EN 1993 2010 2010 (National Malaysian Standard RACK 1
General rules and rules for buildings
Annex)
MS EN 1997-1:
MS EN 1997 2012 Eurocode 7: Geotechnical design - Part 1: General rules Malaysian Standard RACK 1
2012
MS EN 1997-1: Malaysia National Annex to Eurocode 7: Geotechnical design - Part 1: General
MS EN 1997 2012 Malaysian Standard RACK 1
2012 rules
MS EN 12390-1: Testing hardened concrete - Part 1: Shape, dimensions and other requirements
MS EN 12390 2012 Malaysian Standard RACK 1
2012 for specimens and moulds (Second revision)
MS EN 12390-2: Testing hardened concrete - Part 2: Making and curing specimens for strength
MS EN 12390 2012 Malaysian Standard RACK 1
2012 tests (Second revision)
MS EN 12390-3: Testing hardened concrete - Part 3: Compressive strength of test specimens
MS EN 12390 2012 Malaysian Standard RACK 1
2012 (Second revision)
MS EN 12390-4: Testing hardened concrete - Part 4: Compressive strength of testing specimens
MS EN 12390 2012 Malaysian Standard RACK 1
2012 (Second revision)
MS EN 12390-5: Testing hardened concrete - Part 5: Flexural strength of test specimens (Second
MS EN 12390 2012 Malaysian Standard RACK 1
2012 revision)
Page 32 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS EN 12390-6: Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
MS EN 12390 2012 Malaysian Standard RACK 1
2012 (Second revision)
MS EN 12390-7: Testing hardened concrete - Part 7: Density of hardened concrete (Second
MS EN 12390 2012 Malaysian Standard RACK 1
2012 revision)
MS EN 12390-8: Testing hardened concrete - Part 8: Depth of penetration of water under
MS EN 12390 2012 Malaysian Standard RACK 1
2012 pressure (Second revision)
MS EN 12504-1: Testing concrete in structures - Part 1: Cored specimens - taking, examining
MS EN 12504 2013 Malaysian Standard RACK 1
2013 and testing in compression (Second revision)
MS EN 12504-2: Testing concrete in structures - Part 2: Non destructive testing - Determination
MS EN 12504 2013 Malaysian Standard RACK 1
2013 of rebound number (Second revision)
MS EN 12504-3: Testing concrete in structures - Part 3: Determination of pull out force (Second
MS EN 12504 2013 Malaysian Standard RACK 1
2013 revision)
MS EN 12504-4: Testing concrete in structures - Part 4: Determination of ultrasonic pulse
MS EN 12504 2013 Malaysian Standard RACK 1
2013 velocity (Second revision)
MS EN 12620:
MS EN 12620 2010 Aggregates for concrete (Second revision) Malaysian Standard RACK 1
2010
Page 33 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 34 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 35 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS ISO 3951: Sampling procedures and charts for inspection by variables for percent
MS ISO 3951 1994 Malaysian Standard RACK 2
1994 nonconforming
MS ISO 4057: Information processing - Dara interchange on 6,30 mm (0.25 in) magnetic tape
MS ISO 4057 1994 Malaysian Standard RACK 2
1994 cartridge, 63 bpmm (1 600 bpi) phase encoded
MS ISO 4306-3:
MS ISO 4306 2001 Cranes - vocabulary Part 3: Tower cranes (ISO 4306-3: 1991, IDT) Malaysian Standard RACK 2
2001
MS ISO 4341: Information processing - magnetic tape cassette and cartridge labelling and file
MS ISO 4341 1994 Malaysian Standard RACK 2
1994 structure for information interchange
MS ISO/IEC Information technology - ISO 8 bit code for information interchange - structure
MS ISO 4873 1993 Malaysian Standard RACK 2
4873: 1993 and rules for immplementation
MS ISO 4902: Information technology - Data communication - 37 pole DTE/DCE interface
MS ISO 4902 1992 Malaysian Standard RACK 2
1992 connector and contact number assignments
MS ISO 4903: Information technology - Data communication - 15 pole DTE/DCE interface
MS ISO 4903 1992 Malaysian Standard RACK 2
1992 connector and contact number assignments
MS ISO 4909:
MS ISO 4909 1994 Bank cards - magnetic stripe data content for track 3 Malaysian Standard RACK 2
1994
MS ISO 5138-1:
MS ISO 5138 1993 Office machines - vocabulary - section 1: Dictation equipment Malaysian Standard RACK 2
1993
MS ISO 5138-2:
MS ISO 5138 1993 Office machines - vocabulary - section 2: Duplicators Malaysian Standard RACK 2
1993
MS ISO 5138-3:
MS ISO 5138 1993 Office machines - vocabulary - section 3: Addressing machines Malaysian Standard RACK 2
1993
MS ISO 5138-4:
MS ISO 5138 1993 Office machines - vocabulary - section 4: Letter opening machines Malaysian Standard RACK 2
1993
MS ISO 5138-5:
MS ISO 5138 1993 Office machines - vocabulary - section 5: Letter folder machines Malaysian Standard RACK 2
1993
MS ISO 5138-7:
MS ISO 5138 1993 Office machines - vocabulary - section 7: Postal franking machines Malaysian Standard RACK 2
1993
MS ISO 5137-9:
MS ISO 5138 1993 Office machines - vocabulary - section 9: Typewriters Malaysian Standard RACK 2
1993
MS ISO 5218:
MS ISO 5218 1993 Information interchange - representation of human sexes Malaysian Standard RACK 2
1993
MS ISO 5479: Statistical interpretation of data - tests for departure from the normal
MS ISO 5479 2001 Malaysian Standard RACK 2
2001 distribution (ISO 5479: 1997, IDT)
Information processing - 9 track, 12,7 mm (0.5 in) wide magnetic tape for
MS ISO 5652:
MS ISO 5652 1994 information interchange - format and recording, using group coding at 246 Malaysian Standard RACK 2
1994
cpmm (6 250 cpi)
Page 36 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS ISO 5725-6: Accuracy (Trueness and Precision) of measurement methods and results - Part
MS ISO 5725 2002 Malaysian Standard RACK 2
2002 6: Use in practice of accuracy values (ISO 5725-6: 1994, IDT)
MS ISO 5725-3: Accuracy (Trueness and Precision) of measurement methods and results - Part
MS ISO 5725 2002 Malaysian Standard RACK 2
2002 3: Use in practice of accuracy values (ISO 5725-3: 1994, IDT)
MS ISO 5725-1: Accuracy (Trueness and Precision) of measurement methods and results - Part
MS ISO 5725 2002 Malaysian Standard RACK 2
2002 1: General principles and definitions (ISO 5725-7: 1994, IDT)
Accuracy (Trueness and Precision) of measurement methods and results - Part
MS ISO 5725-2:
MS ISO 5725 2002 2: Basic method for the determination of repeatabilty and reproducibility of a Malaysian Standard RACK 2
2002
standard measurement method (ISO 5725-2: 1994, IDT)
Accuracy (Trueness and Precision) of measurement methods and results - Part
MS ISO 5725-4:
MS ISO 5725 2002 4: Basic method for the determination of the trueness of a standard Malaysian Standard RACK 2
2002
measurement method (ISO 5725-4: 1994, IDT)
Accuracy (Trueness and Precision) of measurement methods and results - Part
MS ISO 5725-5:
MS ISO 5725 2002 5: Alternative methods for the determination of the precision of a standard Malaysian Standard RACK 2
2002
measurement method (ISO 5725-5: 1998, IDT)
MS ISO 6093: Information processing - representation of numerical values in characters
MS ISO 6093 1993 Malaysian Standard RACK 2
1993 strings for information interchange
MS ISO 6098: Information processing - self- loading cartridges for 12,7 mm (0.5 in) wide
MS ISO 6098 1994 Malaysian Standard RACK 2
1994 magnetic tape
MS ISO 6182-1: Fire protection - automatic sprinkler systems - Part 1: Requirements and test
MS ISO 6182 2000 Malaysian Standard RACK 2
2000 methods for sprinklers (ISO 6182-1: 1993, IDT)
Fire protection - automatic sprinkler systems - Part 2: Requirements and test
MS ISO 6182-2:
MS ISO 6182 2000 methods for wet alarm valves, retard chambers and water motor alarms (ISO Malaysian Standard RACK 2
2000
6182-2: 1993, IDT)
MS ISO 6182-3: Fire protection - automatic sprinkler systems - Part 3: Requirements and test
MS ISO 6182 2000 Malaysian Standard RACK 2
2000 methods for dry pipe valves (ISO 6182-3: 1993, IDT)
MS ISO 6182-4: Fire protection - automatic sprinkler systems - Part 4: Requirements and test
MS ISO 6182 2000 Malaysian Standard RACK 2
2000 methods for quick opening devices (ISO 6182-4: 1993, IDT)
MS ISO 6182-5: Fire protection - automatic sprinkler systems - Part 5: Requirements and test
MS ISO 6182 2000 Malaysian Standard RACK 2
2000 methods for deluge valves (ISO 6182-5: 1995, IDT)
MS ISO 6350: Protective clothing - Protection against liquid chemicals - determination of
MS ISO 6350 2002 Malaysian Standard RACK 2
2002 resistance of materials to penetration by liquids (ISO 6530: 1990, IDT)
MS ISO 6385:
MS ISO 6385 2005 Ergonomic principles in the design of work systems (ISO 6385: 2004, IDT) Malaysian Standard RACK 2
2005
MS ISO/IEC Information technology - control functions for coded character sets (First
MS ISO 6429 1999 Malaysian Standard RACK 2
6429: 1999 revision)
Page 37 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 38 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS ISO/IEC
MS ISO 7810 1999 Identification cards - physical charateristics (First revision) Malaysian Standard RACK 2
7810: 1999
MS ISO/IEC Identification cards - recording technique - Part 2: Magnetic stripe (First
MS ISO 7811 1998 Malaysian Standard RACK 2
7811-2: 1998 revision)
MS ISO/IEC Identification cards - recording technique - Part 4: Location of read-only
MS ISO 7811 1998 Malaysian Standard RACK 2
7811-4: 1998 magnetic tracks - Track 1 and 2 (First revision)
MS ISO/IEC Identification cards - recording technique - Part 5: Location of read write
MS ISO 7811 1998 Malaysian Standard RACK 2
7811-5: 1998 magnetic track - Track 3
MS ISO/IEC Identification cards - recording technique - Part 6: Magnetic stripe - High
MS ISO 7811 1998 Malaysian Standard RACK 2
7811-6: 1998 coercivity
MS ISO/IEC Identification cards - Identification of issues - Part 1: Numbering system (First
MS ISO 7812 1998 Malaysian Standard RACK 2
7812-1: 1998 revision)
MS ISO/IEC Identification cards - Identification of issues - Part 2: Application and
MS ISO 7812 1998 Malaysian Standard RACK 2
7812-2: 1998 registration procedures
MS ISO/IEC
MS ISO 7813 1998 Identification cards - financial transaction cards Malaysian Standard RACK 2
7813: 1998
Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO/IEC
MS ISO 7816 2003 contacts - Part 3: Electronic signals and transmission protocols (First revision) Malaysian Standard RACK 2
7816-3: 2003
(ISO/IEC 7816-3: 1997, IDT)
Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO/IEC
MS ISO 7816 2003 contacts - Part 4: Interindustry commands for interchange (ISO/IEC 7816-4: Malaysian Standard RACK 2
7816-4: 2003
1995, IDT)
Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO/IEC
MS ISO 7816 2003 contacts - Part 5: Numbering system and registration procedure for application Malaysian Standard RACK 2
7816-5: 2003
identifiers ( First revision) (ISO/IEC 7816-5: 1994, IDT)
MS ISO/IEC Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO 7816 2003 Malaysian Standard RACK 2
7816-6: 2003 contacts - Part 6: Interindustry data elements (ISO/IEC 7816-6: 1996, IDT)
MS ISO/IEC Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO 7816 2003 Malaysian Standard RACK 2
7816-7: 2003 contacts - Part 6: Interindustry data elements (ISO/IEC 7816-6: 1996, IDT)
Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO/IEC
MS ISO 7816 2003 contacts - Part 6: Security related interindustry commands (ISO/IEC 7816-8: Malaysian Standard RACK 2
7816-8: 2003
1999, IDT)
Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO/IEC
MS ISO 7816 2003 contacts - Part 9: Additional interidustry commands and security attributes Malaysian Standard RACK 2
7816-9: 2003
(ISO/IEC 7816-9: 2000, IDT)
Information technology - Identification cards - Integrated circuit (s) cards with
MS ISO/IEC
MS ISO 7816 2003 contacts - Part 10: Electronic signals and answer to reset for synchronous cards Malaysian Standard RACK 2
7816-10: 2003
(ISO/IEC 7816-10: 1999, IDT)
Page 39 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS ISO/IEC Information technology - General structure for the interchange of code values -
MS ISO 7826 1995 Malaysian Standard RACK 2
7826-1: 1995 Part 1: Identification of coding schemes
MS ISO/IEC Information technology - General structure for the interchange of code values -
MS ISO 7826 1995 Malaysian Standard RACK 2
7826-2: 1995 Part 2: Registration of coding schemes
MS ISO 7870:
MS ISO 7870 2000 Control charts - General guide and introduction ( ISO 7870: 1993, IDT) Malaysian Standard RACK 2
2000
Information processing - unrecorded, hard sectored, 130 mm (5.25 in) flexible
MS ISO 7901:
MS ISO 7901 1994 disk cartridges, one or two sided use - dimensional, physical and magnetic Malaysian Standard RACK 2
1994
characteristics
Information processing - magnetic disk for data storage devices 83 000 flux
MS ISO 7929:
MS ISO 7929 1994 transitions per track, 130 mm (5.12 in) outer diameter, 40 mm (1.57 in) inner Malaysian Standard RACK 2
1994
diameter
MS ISO 7942: Information processing systems - Computer graphics - Graphical Kernel
MS ISO 7942 1992 Malaysian Standard RACK 2
1992 System (GKS) functional description
MS ISO 7966:
MS ISO 7966 2000 Acceptance control charts (ISO 7966: 1993, IDT) Malaysian Standard RACK 2
2000
Information processing - Data interchange pm 6,30 mm (0.25 in) wide
MS ISO 8063-2: magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi) - Part
MS ISO 8063 1994 Malaysian Standard RACK 2
1994 2: Track format and method of recording for data interchange in start/stop
mode
MS ISO 8064: Information processing - reels for 12,7 mm (0.5 in) wide magnetic tapes - sizes
MS ISO 8064 1994 Malaysian Standard RACK 2
1994 16, 18 and 22
MS ISO 8208: Information technology - Data communications - X.25 packet layer protocol
MS ISO 8208 1993 Malaysian Standard RACK 2
1993 for data terminal equipment
MS ISO 8258:
MS ISO 8258 1994 Shewhart control charts Malaysian Standard RACK 2
1994
MS ISO 8330: Rubber and plastic hoses and hose assemblies - vocabulary (ISO 8330: 1998,
MS ISO 8330 2002 Malaysian Standard RACK 2
2002 IDT)
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
MS ISO 8378-2:
MS ISO 8378 1994 cartridges using modified frequency modulation recording at 7 958ftprad, 3,8 Malaysian Standard RACK 2
1994
tpmm (96 tpi) on both sides - Part 2: Track format A
Information processing - Data interchange on 130 mm (5.25 in) flexible disk
MS ISO 8378-3:
MS ISO 8378 1994 cartridges using modified frequency modulation recording at 7 958ftprad, 3,8 Malaysian Standard RACK 2
1994
tpmm (96 tpi) on both sides - Part 3: Track format B
MS ISO 8422:
MS ISO 8422 1994 Sequential sampling plans for inspection at attributes Malaysian Standard RACK 2
1994
MS ISO 8423: Sequential sampling plans for inspection by variables for percent
MS ISO 8423 1994 Malaysian Standard RACK 2
1994 nonconforming (known standard deviation)
Page 40 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 41 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 42 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS ISO 9000: Quality management systems - Fundamentals and vocabulary (ISO 9000:
MS ISO 9000 2000 Malaysian Standard RACK 2
2000 2000, IDT)
MS ISO 9000: Quality management systems - Fundamentals and vocabulary (Second
MS ISO 9000 2015 Malaysian Standard RACK 2
2015 revision)
MS ISO 9001:
MS ISO 9001 2000 Quality management systems - Requirements (ISO 9000: 2000, IDT) Malaysian Standard RACK 2
2000
MS ISO 9001: Quality management systems - Requirements (Second revision) (ISO 9001:
MS ISO 9001 2015 Malaysian Standard RACK 2
2015 2015, IDT)
MS ISO 9004: Quality management systems - Guidelines for performance improvements
MS ISO 9004 2000 Malaysian Standard RACK 2
2000 (ISO 9004: 2000, IDT)
MS ISO/IEC
MS ISO 9075 1996 Infromation technology - database languages - SQL Malaysian Standard RACK 2
9075: 1993
MS ISO/IEC Information technology - Software product evaluation - Quality characteristics
MS ISO 9126 1993 Malaysian Standard RACK 2
9126: 1993 and guidelines for their use
MS ISO/IEC Information technology - 130 mm optical disk cartridge, write once, for
MS ISO 9171 1994 Malaysian Standard RACK 2
9171: 1994 information interchange - Part 1: Unrecorded optical disk cartridge
MS ISO/IEC Information technology - 130 mm optical disk cartridge, write once, for
MS ISO 9171 1994 Malaysian Standard RACK 2
9171-2: 1994 information interchange - Part 2: Recording format
MS ISO/IEC
MS ISO 9281 1993 Information technology - Picture coding methods - Part 1: Identification Malaysian Standard RACK 2
9281-1: 1993
MS ISO/IEC Information technology - Volume and file structure of disk cartridges for
MS ISO 9293 1994 Malaysian Standard RACK 2
9293: 1994 information interchange
Information processing systems - Data interchange on 90 mm (3,5 in) flexible
MS ISO/IEC disk cartridges using modified frequency modulation recording at 15 916
MS ISO 9529 1994 Malaysian Standard RACK 2
9529-1: 1994 ftprad, on 80 tracks on earch side : Part 1: Dimensional, physical and magnetic
characteristics
Information processing systems - Data interchange on 90 mm (3,5 in) flexible
MS ISO/IEC
MS ISO 9529 1994 disk cartridges using modified frequency modulation recording at 15 916 Malaysian Standard RACK 2
9529-2: 1994
ftprad, on 80 tracks on earch side : Part 1: Track format
MS ISO/IEC Information technology - Compuer graphics - programmers hierarchical
MS ISO 9529 1996 Malaysian Standard RACK 2
9592-4: 1996 interactive graphics systems (PHIGS) : Part 4: PHIGS plus and TC1: 94
MS ISO 9543: Information processing systems - information exchange between systems -
MS ISO 9543 1992 Malaysian Standard RACK 2
1992 synchocnous transmission signal quality at DTE/DCE interfaces
MS ISO/IEC Infromation tecnology - Open systems interconnection - application layer
MS ISO 9545 1995 Malaysian Standard RACK 2
9545: 1995 structure
MS ISO/IEC Information technology - Open systems interconnection - remote database
MS ISO 9579 1995 Malaysian Standard RACK 2
9579-1: 1995 access - Part 1: Generic model, service and protocol
Page 43 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 44 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 45 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 46 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS ISO 9926-1:
MS ISO 9926 2001 Cranes - Training of operators - General (ISO 9926-1: 1990, IDT) Malaysian Standard RACK 2
2001
MS ISO/IEC Information technology - portable operating system interface (POSIX) - Part 1:
MS ISO 9945 1995 Malaysian Standard RACK 2
9945-1: 1995 system application program interface (API) [C Language]
MS ISO/IEC Information processing systems - designation of unrecorded flexible disk
MS ISO 9983 1994 Malaysian Standard RACK 2
9983: 1994 cartridge
MS ISO/IEC Information technology - Keyboard layouts for text and office systems - Part 1:
MS ISO 9995 2001 Malaysian Standard RACK 2
9995-1: 2001 General principles governing keyboard layouts (ISO/IEC 9995-1: 1994, IDT)
MS ISO 10006:
MS ISO 10006 1998 Quality management - Guidelines to quality in project management Malaysian Standard RACK 2
1998
MS ISO 10006: Quality management systems - Guidelines for quality management in projects
MS ISO 10006 2005 Malaysian Standard RACK 2
2005 (First revision) (ISO 10006: 2003, IDT)
MS ISO 10011-2: Guidelines for auditing qualilty systems Part 2: Qualification criteria for
MS ISO 10011 1994 Malaysian Standard RACK 2
1994 quality systems auditors
MS ISO 10011-3: Guidelines for auditing qualilty systems Part 3: Management of audit
MS ISO 10011 1994 Malaysian Standard RACK 2
1995 programmes
MS ISO 10012-1: Quality assurance requirements for measuring equipment : Part 1: Metrological
MS ISO 10012 1994 Malaysian Standard RACK 2
1994 confirmation system for maesuring equipment
MS ISO 10012-2: Quality assurance requirements for measuring equipment : Part 2: Guidelines
MS ISO 10012 1994 Malaysian Standard RACK 2
1998 for control of measurement processes
MS ISO 10015:
MS ISO 10015 2002 Quality management - Guidelines for training (ISO 10015: 199, IDT) Malaysian Standard RACK 2
2002
Information technology - Telecommunications and information exchange
MS ISO/IEC between systems - Transport comformance testing for connection mode
MS ISO 10025 1995 Malaysian Standard RACK 2
10025-3: 1995 transport protocol operationg over connection - mode network service - Part 3:
Transport test management protocol specification
MS ISO/IEC Guidelines for the preparation of conformity clauses in programming language
MS ISO 10034 1994 Malaysian Standard RACK 2
10034: 1994 standards
MS ISO/IEC Information technology - Data intechange on read only 120 mm optical data
MS ISO 10149 1994 Malaysian Standard RACK 2
10149: 1994 disks (CD-ROM)
MS ISO/IEC Information and documentation - OSI - Interlibrary loan application service
MS ISO 10160 1996 Malaysian Standard RACK 2
10160: 1996 definition
MS ISO/IEC Information and documentation - Open systems interconnection - Systems
MS ISO 10164 1995 Malaysian Standard RACK 2
10164-1: 1995 management : Object management function
MS ISO/IEC Information and documentation - Open systems interconnection - Systems
MS ISO 10164 1995 Malaysian Standard RACK 2
10164-2: 1996 management : State management function
MS ISO/IEC Information and documentation - Open systems interconnection - Systems
MS ISO 10164 1995 Malaysian Standard RACK 2
10164-3: 1995 management : Attributes for representing relationships
Page 47 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 48 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 49 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS ISO 10545- Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-
MS ISO 10545 2002 Malaysian Standard RACK 2
16: 2002 16: 1999, IDT)
MS ISO/IEC Information technology - Use of X.25 packet layer protocol in conjunction
MS ISO 10588 1995 Malaysian Standard RACK 2
10588: 1995 with X.21/X.21 BIS to provide the OSI connection mode network service
Information technology - International standardized profiles AFTnn - File
MS ISO/IEC ISP
MS ISO 10607 1998 transfer, access and management - Part 1: Specification of ACSE, presentation Malaysian Standard RACK 2
10607-1: 1998
and session protocols for the use by FTAM (First revision)
Information technology - International standardized profiles AFTnn - File
MS ISO/IEC ISP
MS ISO 10607 1998 transfer, access and management - Part 1: Specification of ACSE, presentation Malaysian Standard RACK 2
10607-2: 1998
and session protocols for the use by FTAM (First revision)
Information technology - International standardized profiles AFTnn - File
MS ISO/IEC ISP
MS ISO 10607 1998 transfer, access and management - Part 4: AFT 12 - Positional file transfer Malaysian Standard RACK 2
10607-4: 1998
(First revision)
Information technology - International standardized profiles AFTnn - File
MS ISO/IEC ISP
MS ISO 10607 1998 transfer, access and management - Part 5: AFT 22 - Positional file access (First Malaysian Standard RACK 2
10607-5: 1998
revision)
Information technology - International standardized profiles AFTnn - File
MS ISO/IEC ISP
MS ISO 10607 1998 transfer, access and management - Part 6: AFT 3 - File management service Malaysian Standard RACK 2
10607-6: 1999
(First revision)
Information technology - International standardized profiles TA nnnn -
MS ISO/IEC ISP
MS ISO 10608 1995 Connection mode transport service over connectionless mode netwwork Malaysian Standard RACK 2
10608-1: 1995
service - Part 1: General overview and subnetwork - independent requirements
Information technology - International standardized profiles TA nnnn -
MS ISO/IEC ISP Connection mode transport service over connectionless mode netwwork
MS ISO 10608 1995 Malaysian Standard RACK 2
10608-5: 1995 service - Part 5: TA1111/TA1121 profiles including subnetwork dependent
requirements for X.25 packet switched data networks using virtual calls
Information technology - International standardized profiles TA nnnn -
MS ISO/IEC ISP Connection mode transport service over connectionless mode netwwork
MS ISO 10608 1995 Malaysian Standard RACK 2
10608-13: 1995 service - Part 13: MAC sublayer and physical layer dependent requirements for
a token ring LAN subnetwork
Information technology - International standardized profiles TB, TC, TD and
MS ISO/IEC ISP
MS ISO 10609 1995 TE - Connection mode transport service over connection - mode network Malaysian Standard RACK 2
10609-5: 1995
services - Part 5: Definition of profiles TB1111/TB1121
Information technology - International standardized profiles TB, TC, TD and
MS ISO/IEC ISP
MS ISO 10609 1995 TE - Connection mode transport service over connection - mode network Malaysian Standard RACK 2
10609-6: 1995
services - Part 6: Definition of profiles TC1111/TC1121
Page 50 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 51 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 52 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 53 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 54 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 55 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 56 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 57 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 58 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 59 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS IEC 320-2- Safety of household and similar electrical appliances Part 2: Particular
MS IEC 335 1996 Malaysian Standard RACK 2
26: 1996 requirements for clocks
MS IEC 335-2- Safety of household and similar electrical appliances Part 2: Particular
MS IEC 335 1996 Malaysian Standard RACK 2
29: 1996 requirements for battery charges
MS IEC 364-1: Electrical installations of buildings Part 1: Scope,object and fundamental
MS IEC 364 1996 Malaysian Standard RACK 2
1996 principles
MS IEC 364-2- Electrical installations of buildings Part 2: Definitions - Chapter 21: Guide to
MS IEC 364 1996 Malaysian Standard RACK 2
21: 1996 general terms
MS IEC 364-3: Electrical installations of buildings Part 3: Assessment of general
MS IEC 364 1996 Malaysian Standard RACK 2
1996 characteristics
MS IEC 364-4- Electrical installations of buildings Part 4: Protection for safety Chapter 41:
MS IEC 364 1996 Malaysian Standard RACK 2
41: 1996 Ptotection against electrical shock
MS IEC 364-4- Electrical installations of buildings Part 4: Protection for safety Chapter 42:
MS IEC 364 1996 Malaysian Standard RACK 2
42: 1996 Ptotection against thermal effects
MS IEC 364-4- Electrical installations of buildings Part 4: Protection for safety Chapter 45:
MS IEC 364 1996 Malaysian Standard RACK 2
45: 1996 Ptotection against undervoltage
MS IEC 364-4- Electrical installations of buildings Part 4: Protection for safety Chapter 46:
MS IEC 364 1996 Malaysian Standard RACK 2
46: 1996 Isolation and switching
Electrical installations of buildings Part 4: Protection for safety Chapter 47:
MS IEC 364-4-
MS IEC 364 1996 Application of protective measures for safety Section 470: General Section Malaysian Standard RACK 2
47: 1996
471: Measures of protection against eletric shock
Electrical installations of buildings Part 4: Protection for safety Chapter 44:
MS IEC 364-4-
MS IEC 364 1996 Protection against overvoltages - Section 442: Protection of low-voltage Malaysian Standard RACK 2
442: 1996
installations against faults between high voltage systems and earth
Electrical installations of buildings Part 4: Protection for safety Chapter 47:
MS IEC 364-4-
MS IEC 364 1996 Application of protective measures for safety - Section 473: Measures of Malaysian Standard RACK 2
473: 1996
protection against overcurrent
Electrical installations of buildings Part 4: Protection for safety Chapter 48:
MS IEC 364-4- Choice of protective measures as a function of external influences - Section
MS IEC 364 1996 Malaysian Standard RACK 2
481: 1996 481: Selection of measures for protection against electric shock in relation to
external influences
Electrical installations of buildings Part 4: Protection for safety Chapter 48:
MS IEC 364-4-
MS IEC 364 1996 Choice of protective measures as a function of external influences - Section Malaysian Standard RACK 2
482: 1996
482: Protection against fire
MS IEC 364-5- Electrical installations of buildings Part 5: Selection and erection of electrical
MS IEC 364 1996 Malaysian Standard RACK 2
51: 1996 equipment Chapter 51: Common rules
MS IEC 364-5- Electrical installations of buildings Part 5: Selection and erection of electrical
MS IEC 364 1996 Malaysian Standard RACK 2
52: 1996 equipment Chapter 52: Wiring systems
Page 60 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 61 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Common test methods for insulating and sheating materials of electric cables
MS IEC 811-2-1:
MS IEC 811 1997 Part 2: Methods specific to elastomeric compaunds Section 1: Ozone resistance Malaysian Standard RACK 2
1997
test - hot set test - mineral oil immersion test
Common test methods for insulating and sheating materials of electric cables
MS IEC 811-3-1:
MS IEC 811 1997 Part 3: Methods specific to PVC compaunds Section 1: Pressure for resistance Malaysian Standard RACK 2
1997
to cracking
Common test methods for insulating and sheating materials of electric cables
MS IEC 811-3-2:
MS IEC 811 1997 Part 3: Methods specific to PVC compaunds Section 2: Loss of mass test - Malaysian Standard RACK 2
1997
thermal stability test
Common test methods for insulating and sheating materials of electric cables
Part 4: Methods specific to polyethylene and polypropylene compaunds
MS IEC 811-4-1:
MS IEC 811 1997 Section 1: Resistance to environmental stress cracking - wrapping test after Malaysian Standard RACK 2
1997
thermal ageing in air - measurement of the melt flow index - carbon black
and/or mineral content measurement in PE
Common test methods for insulating and sheating materials of electric cables
Part 5: Methods specific to filling compaunds Section 1: Drop point -
MS IEC 811-5-1:
MS IEC 811 1997 separation of oil - lower temparature brittleness - total acid number - absence Malaysian Standard RACK 2
1997
of corrosive components - permittivity at 23c - D.C Resistivity at 23c and
100c
MS IEC 922: Ballasts for discharge lamps (excluding tubular fluorescent lamps) general and
MS IEC 922 1995 Malaysian Standard RACK 2
1995 safety requirements
MS IEC 923: Auxiliaries for lamps - ballasts for discharge lamps (excluding tubular
MS IEC 923 1995 Malaysian Standard RACK 2
1995 fluorescent lamps) - performance requirements
MS IEC 928: A.C supplied electronic ballasts for tubular fluorescent lamps general and
MS IEC 928 1995 Malaysian Standard RACK 2
1995 safety requirements
MS IEC 929: A.C supplied electronic ballasts for tubular fluorescent lamps - Performance
MS IEC 929 1995 Malaysian Standard RACK 2
1995 requirements
MS IEC 947-1:
MS IEC 947 1996 Low voltage switchgear and controlgear Part 1: General rules Malaysian Standard RACK 2
1996
MS IEC 947-4-1: Low voltage switchgear and controlgear Part 4: Contractors and motor- starters
MS IEC 947 1996 Malaysian Standard RACK 2
1996 Section 1: Electromechanical contractors and motor starters
MS IEC 1204: Low voltage power supply devices, d.c. output - performance characteristics
MS IEC 1204 1996 Malaysian Standard RACK 2
1996 and safety requirements
MS IEC/ISO
MS IEC 31010 2011 Risk management - Risk assessment techniques (IEC/ISO 31010: 2009,IDT) Malaysian Standard RACK 2
31010: 2011
MS IEC 60064: Tungsten filament lamps for domestic and similar general lighting purposes
MS IEC 60064 1999 Malaysian Standard RACK 2
1999 performance requirements (IEC 60064: 1994, IDT)
MS IEC 60065: Audio, video and similar electronic apparatus - safety requirements (First
MS IEC 60065 2003 Malaysian Standard RACK 2
2003 revision) (IEC 60065: 2001, IDT)
Page 62 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS IEC 60188:
MS IEC 60188 1999 High - pressure mercury vapour lamps (IEC 60188: 1974, IDT) Malaysian Standard RACK 2
1999
MS IEC 60228: Conductors of insulated cables (IEC 60228: 1978, First Supplement 228A:
MS IEC 60228 2001 Malaysian Standard RACK 2
2001 1982 and Amendment 1: 1993, IDT)
MS IEC 60229: Tests on cable oversheaths which have a special protective function and are
MS IEC 60229 2001 Malaysian Standard RACK 2
2001 applied by extrusion (IEC 60229: 1982, IDT)
MS IEC 60238:
MS IEC 60238 1999 Edison screw lamholders (IEC 60238: 1998, IDT) Malaysian Standard RACK 2
1999
MS IEC 60287-2- Electric cables - calculation of the current rating - Part 2: Thermal resistance -
MS IEC 60287 2001 Malaysian Standard RACK 2
1: 2001 Section 1: Calculations of thermal resistance (IEC 60287-2-1: 1994, IDT)
Electric cables - calculation of the current rating - Part 2: Thermal resistance -
MS IEC 60287-2-
MS IEC 60287 2001 Section 1: A method for calculating reduction factors for groups of cables in Malaysian Standard RACK 2
2: 2001
free air, protected from solar radiation (IEC 60287-2-2: 1995, IDT)
Electric cables - calculation of the current rating - Part 2: Current rating
MS IEC 60287-1- equations (100% load factor) and calculations of losses - Section 2: Sheath
MS IEC 60287 2001 Malaysian Standard RACK 2
2: 2001 eddy current loss factors for two circuits in flat formation (IEC 60287-1-2:
1993, IDT)
Tests for electric cables under fire conditions - circuit integrity - Part 11:
MS IEC 60331-
MS IEC 60331 2001 Apparatus - fire alone at a flame temparature of a least 750c (IEC 60331-11: Malaysian Standard RACK 2
11: 2001
1999,IDT)
Tests for electric cables under fire conditions - circuit integrity - Part 21:
MS IEC 60331-
MS IEC 60331 2001 Procedures and requirements - cables of rated voltage up to and including Malaysian Standard RACK 2
21: 2001
0.6/1.0 kV (IEC 60331-21: 1999,IDT)
MS IEC 60331- Tests for electric cables under fire conditions - circuit integrity - Part 23:
MS IEC 60331 2001 Malaysian Standard RACK 2
21: 2001 Procedures and requirements - Electric data cables (IEC 60331-23: 1999,IDT)
MS IEC 60331- Tests for electric cables under fire conditions - circuit integrity - Part 25:
MS IEC 60331 2001 Malaysian Standard RACK 2
25: 2001 Procedures and requirements - Optical fibre cables (IEC 60331-25: 1999,IDT)
MS IEC 60332-1: Tests on electric cables under fire conditions Part 1: Test on a single vertical
MS IEC 60332 2001 Malaysian Standard RACK 2
2001 insulated wire or cable (IEC 60332-1: 1993,IDT)
MS IEC 60335-2- Safety of household and similar electrical appliances - Part 2: Particular
MS IEC 60335 1999 Malaysian Standard RACK 2
65: 1999 requirements for air cleaning appliances (First revision)
Safety of household and similar electrical appliances - Part 2: Particular
MS IEC 60335-2-
MS IEC 60335 1999 requirements for humidifiers intended for use with heating, ventilation or air Malaysian Standard RACK 2
88: 2002
conditioning systems (IEC 60335-2-88: 1997, IDT)
MS IEC 60335-2- Safety of household and similar electrical appliances - Part 2: Particular
MS IEC 60335 1999 Malaysian Standard RACK 2
40: 1999 requirements for electrical heat pumps, air conditioners and dehumidifiers
Page 63 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 64 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS IEC 60598-2- Luminares Part 2: Particular requirements Section 3: Luminaires for road and
MS IEC 60598 1997 Malaysian Standard RACK 2
3: 1997 street lighting
MS IEC 60598-2-
MS IEC 60598 1998 Luminares Part 2: Particular requirements Section 5: Floodlights Malaysian Standard RACK 2
5: 1999
MS IEC 60598-2-
MS IEC 60598 1998 Luminares Part 2: Particular requirements Section 8: Handlamps Malaysian Standard RACK 2
8: 1998
MS IEC 60598-2- Luminares Part 2: Particular requirements Section 18: Luminaires for
MS IEC 60598 1998 Malaysian Standard RACK 2
18: 1998 swimming pools and similar applications
MS IEC 60598-2-
MS IEC 60598 1998 Luminares Part 2: Particular requirements Section 20: Lightning chains Malaysian Standard RACK 2
20: 1998
Luminares Part 2: Particular requirements Section 25: Luminaires for use on
MS IEC 60598-2-
MS IEC 60598 1998 clinical areas of hospitals and health care buildings (IEC 60598-2-25: 1994 and Malaysian Standard RACK 2
25: 2001
its corrigendum: 1994, IDT)
Medical electrical equipment - Part 1: General requirements for safety -
MS IEC 60601-1-
MS IEC 60601 2002 Section 2: Collateral standard: Electromagnetic compactibility - Requirements Malaysian Standard RACK 2
2: 2002
and tests (IEC 60601-1-2: 1993, IDT)
MS IEC 60634: Heat test source (H.T.S) lamps for carrying out heating tests on luminaires
MS IEC 60634 1999 Malaysian Standard RACK 2
1999 (IEC 60634: 1993, IDT)
MS IEC 60662:
MS IEC 60662 2002 High - pressure sodium vapour lamps (IEC 60662: 1980, IDT) Malaysian Standard RACK 2
2002
General requirements for enclosures for accessories for household and similar
MS IEC 60670:
MS IEC 60670 2002 fixed electrical installations (IEC 60670: 1989 and its amendment 1: 1994, Malaysian Standard RACK 2
2002
IDT)
MS IEC 60809: Filament lamps for road vehicles - dimensional, electrical and luminpus
MS IEC 60809 2001 Malaysian Standard RACK 2
2001 requirements (IEC 60809: 1995 and its amendment 1: 1996, IDT)
MS IEC 60838-2- Miscellaneous lampholders - Part 2: Particular requirements - Section 1:
MS IEC 60838 1999 Malaysian Standard RACK 2
1: 1999 Lampholders S14 (IEC 60838-2-1: 1994, IDT)
MS IEC 60838-1: Miscellaneous lampholders - Part 1: General requirements and tests (IEC
MS IEC 60838 1999 Malaysian Standard RACK 2
1999 60838-1: 1997, IDT)
MS IEC 60898: Electrical accessories - circuit breakers for overcurrent protection for
MS IEC 60898 1998 Malaysian Standard RACK 2
1998 household and similar installations (MCB's)
MS IEC 60926: Auxiliaries for lamps - starting devices (other than glow starters) general and
MS IEC 60926 2001 Malaysian Standard RACK 2
2001 safety requirements (IEC 60926: 1995, and its amendment 1: 1999, IDT)
MS IEC 60947-3: Low voltage switchgear and controlgear - Part 3: Switches, disconnectors,
MS IEC 60947 2000 Malaysian Standard RACK 2
2000 switch- disconnectors and fuse combination units (IEC 60947-3: 1999, IDT)
MS IEC 60947-2: Low voltage switchgear and controlgear - Part 2: Circuit breakers (IEC 60947-
MS IEC 60947 2000 Malaysian Standard RACK 2
2000 2: 1998, IDT)
Page 65 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS IEC 60983:
MS IEC 60983 2002 Miniature lamps (IEC 60983: 1995, IDT) Malaysian Standard RACK 2
2002
Electromagnetic compatibility (EMC) Part 2: Environment Section 2:
MS IEC 61000-2-
MS IEC 61000 2002 Compactability levels for low-frequency conducted disturbance and signalling Malaysian Standard RACK 2
2: 2002
in public low voltage power supply systems (IEC 61000-2-2: 1990,IDT)
Electromagnetic compatibility (EMC) Part 2: Environment Section 2:
MS IEC 61000-2-
MS IEC 61000 2002 Compactability levels for low-frequency conducted disturbances (IEC 61000- Malaysian Standard RACK 2
4: 2002
2-4: 1994,IDT)
Electromagnetic compatibility (EMC) Part 2: Environment Section 9:
MS IEC 61000-2-
MS IEC 61000 2002 Description of hemp environment - radiation disturbance - basic EMC Malaysian Standard RACK 2
9: 2002
publication (IEC 61000-2-9: 1996, IDT)
Electromagnetic compatibility (EMC) Part 2: Environment Section 10
MS IEC 61000-2-
MS IEC 61000 2002 Description of hemp environment -conducted disturbance (IEC 61000-2-10: Malaysian Standard RACK 2
10: 2002
1998, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 2: Limits for
MS IEC 61000-3-
MS IEC 61000 2000 harmonic current emissions (equipment input current 16A per phase) (IEC Malaysian Standard RACK 2
2: 2000
61000-3-2: 1995, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 2: Limits for
MS IEC 61000-3-
MS IEC 61000 2003 harmonic current emissions (equipment input current 16A per phase) (IEC Malaysian Standard RACK 2
2: 2003
61000-3-2: 2001, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 3: Limitation
MS IEC 61000-3-
MS IEC 61000 2000 of voltage fluctuations and flicker in low voltage supply systems for equipment Malaysian Standard RACK 2
3: 2000
with rated current 16A (IEC 61000-3-3: 1994, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 5: Limitation
MS IEC 61000-3-
MS IEC 61000 2000 of voltage fluctuations and flicker in low voltage power supply systems for Malaysian Standard RACK 2
5: 2000
equipment with rated current greater than16A (IEC 61000-3-5: 1994, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 5: Limitation
MS IEC 61000-3-
MS IEC 61000 2000 of voltage fluctuations and flicker in low voltage power supply systems for Malaysian Standard RACK 2
5: 2001
equipment with rated current greater than16A (IEC 61000-3-5: 1994, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 6:
MS IEC 61000-3-
MS IEC 61000 2001 Assessement of emission limits for distoring loads in MV and HV power Malaysian Standard RACK 2
6: 2001
systems - basic EMC publication (IEC 61000-3-6: 1996, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 7:
MS IEC 61000-3-
MS IEC 61000 2001 Assessement of emission limits for fluctuating loads in MV and HV power Malaysian Standard RACK 2
7: 2001
systems - Basic EMC publication (IEC 61000-3-7: 1996, IDT)
Electromagnetic compactibility (EMC) - Part 3: Limits -Section 8: Signalling
MS IEC 61000-3-
MS IEC 61000 2001 on low voltage electrical installations - emission levels, frequency bands and Malaysian Standard RACK 2
8: 2001
electromagnetic disturbance levels (IEC 61000-3-8: 1997, IDT)
Page 66 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 67 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
Page 68 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS IEC 61032: Protective of persons and equipment by enclosures - probes for verification
MS IEC 61032 2002 Malaysian Standard RACK 2
2002 (IEC 61032: 1997, IDT)
D.C or A.C. supplied electronic step down convertors for filament lamps -
MS IEC 61046:
MS IEC 61046 2001 General and safety requirements (IEC 61046: 1993 and its amendment 1: 1995, Malaysian Standard RACK 2
2001
IDT)
MS IEC 61048: Capacitors for use in tubular fluorescent and other discharge lamp circuits -
MS IEC 61048 1999 Malaysian Standard RACK 2
1999 General and safety requirements (IEC 61048: 1991, IDT)
MS IEC 61049: Capacitors for use in tubular fluorescent and other discharge lamp circuits -
MS IEC 61049 1999 Malaysian Standard RACK 2
1999 Performance requirements (IEC 61049: 1991, IDT)
Transformers for tubular discharge lamps having a no load output voltage
MS IEC 61050:
MS IEC 61050 2001 exceeding 1000 V (Generally called neon transformers) - General and safety Malaysian Standard RACK 2
2001
requirements (IEC 61050: 1991 and its amendment 1: 1994, IDT)
MS IEC 61126: Procedure for use in the preparation of maximum lamp outlines (IEC 61126:
MS IEC 61126 2001 Malaysian Standard RACK 2
2001 1992 and its amendment 1: 1996, IDT)
MS IEC 61167:
MS IEC 61167 1999 Metal halide lamps (IEC 1167: 1992, IDT) Malaysian Standard RACK 2
1999
MS IEC 61195: Double capped fluorescent lamps - safety specifications (IEC 61195: 1995,
MS IEC 61195 2001 Malaysian Standard RACK 2
2001 IDT)
MS IEC 61199: Single capped fluorescent lamps - Safety specifications (IEC 61199: 1999,
MS IEC 61199 2001 Malaysian Standard RACK 2
2001 IDT)
Electrical equipment for measurement, control and laboratory use - EMC
MS IEC 61326-1:
MS IEC 61326 2002 requirement - Part 1: General requirements (IEC 61326-1: 1997, its Malaysian Standard RACK 2
2002
amendment 1: 1998 and amendment 2: 2000, IDT)
MS IEC 61547: Equipment for general lighting purposes - EMC immunity requirement (IEC
MS IEC 61547 2002 Malaysian Standard RACK 2
2002 61547: 1995, IDT)
MS IEC 61662:
MS IEC 61662 2001 Assessement of the risk of damage due to lightning (IEC 61662: 1995, IDT) Malaysian Standard RACK 2
2001
MS IEC 61800-3: Adjustable speed eletrical power drive system - Part 3: EMC product standard
MS IEC 61800 2002 Malaysian Standard RACK 2
2002 including specific test methods (IEC 61800-3: 1996, IDT)
MS IEC 62040-2: Uninterruptible power system (UPS) Part 2: Electromagnetic compactability
MS IEC 62040 2002 Malaysian Standard RACK 2
2002 (EMC) requirements (IEC 62040-2: 1999, IDT)
MS IEC 62305-1: Protection against lightning - Part 1: General principles (First revision) (IEC
MS IEC 62305 2007 Malaysian Standard RACK 2
2007 62305-1: 2006, IDT)
MS IEC 62305-2: Protection against lightning - Part 2: Risk management (First revision) (IEC
MS IEC 62305 2007 Malaysian Standard RACK 2
2007 62305-2: 2006, IDT)
MS IEC 62305-3: Protection against lightning - Part 3: Physical damage to structure and life
MS IEC 62305 2007 Malaysian Standard RACK 2
2007 hazard (First revision) (IEC 62305-3: 2006, IDT)
Page 69 of 70
July 11, 2017 [MALAYSIAN STANDARD IEM LIBRARY]
MS IEC 62305-4: Protection against lightning - Part 4: Electrical and electronic systems within
MS IEC 62305 2007 Malaysian Standard RACK 2
2007 structures (First revision) (IEC 62305-4: 2006, IDT)
MS IEC 62305- Protection against lighting - Part 1: General principles (First revision) RACK
MS IEC 62305 2007 Malaysian Standard
1: 2007 (IEC 62305-1: 2006, IDT) 2
MS IEC 62305- Protection against lighting - Part 2: Risk management (First revision) RACK
MS IEC 62305 2007 Malaysian Standard
2: 2007 (IEC 62305-2: 2006, IDT) 2
MS IEC 62305- Protection against lighting - Part 3: Physical damage to structures and RACK
MS IEC 62305 2007 Malaysian Standard
3: 2007 life hazard (First revision) (IEC 62305-3: 2006, IDT) 2
MS IEC 62305- Protection against lighting - Part 4: Electrical and electronic systems RACK
MS IEC 62305 2007 Malaysian Standard
4: 2007 within structures (First revision) (IEC 62305-4: 2006, IDT) 2
Environmental labels and declarations - Self declared environmental claims
MS ISO 14024:
MS ISO 14024 2000 (Type I enviromental labelling - Principles and procedures) (ISO 14024: 1999 Malaysian Standard RACK 2
2000
[E], IDT)
Page 70 of 70