Académique Documents
Professionnel Documents
Culture Documents
*******************************
Advance Turbo Flasher v12.60
*******************************
Introducing the EASIEST Method to DOWNLOAD the NEWEST Lumia Firmware Files...
NaviSearch!
* Very Simple Interface, select via Variant List or Product Code List
* Complete Variant Packs (Product Codes) of all Lumia phones including Lumia 950
XL, 950 and 550.
* Download via ATF Built-in Downloader or Export Download List to your favorite
Download Managers
* Download STOP and RESUME Function
* Automatically verifies Downloaded File Checksum
* File Download is done in the background... You can flash phones etc while
downloading files.
*** FOR NOW, NaviSearch is only Enabled for LUMIA PHONES. It will Enabled in the
future for older BB5 Phones ***
New Phones Supported for Dead Boot Repair via USB Cable Only
(Most of these Models are First in the World)
*******************************
Advance Turbo Flasher v12.50
*******************************
We have now provided SIGNED 32-bit and 64-bit Drivers for Windows 10 Operating
System.
Windows 10 will automatically download the new ATF Drivers from the Windows Driver
Update Server if your PC is connected to the Internet.
You can also manually install them from the usual location:
C:\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS\
Few Improvements:
1. Fixed WinXP Incompatibility with "Qualcomm HS-USB Diagnostics 9006" Boot Repair.
2. Updated WinUSB 32-bit and 64-bit drivers for Nokia Lumia and Android devices.
*******************************
Advance Turbo Flasher v12.40
*******************************
1. Boot Repair via USB for Nokia X, X+, XL, XL 4G via "Qualcomm HS-USB Diagnostics
9006" Interface ONLY
* Boot repair is done via "eMMC Drive" Tab. You can use regular .mmc files to
repair the BOOT.
* You can download .mmc repair files from here:
http://forum.gsmhosting.com/vbb/10399850-post2.html
* Factory Programming is done via the "Factory" tab under "IMEI and Simlocks"
3. Improved Identity Backup (IMEI Simlocks etc) for Nokia X, X+, XL, XL 4G and X2
*** Make sure you backup first 512MB of eMMC USER AREA Before Performing eMMC
Firmware Update ***
Bonus Update:
USB Boot Repair for GT-i9505 Lollipop 5.0.1 !!! - First In The World
Find it at "ATF Plus" ----> "Factory Boot"
Factory Boot now supports "Qualcomm" or "Nokia Emergency Connectivity" Drivers
* Unsigned Drivers MAY NOT Work with Win8 and Win10 64-Bit Machines
*******************************
Advance Turbo Flasher v12.34
*******************************
1. Boot Repair via USB for WP 8.0/8.1 Phones now Supports QUALCOMM DRIVERS.
---> You don't have to install "Nokia Emergency Driver" if Qualcomm Drivers are
already Installed.
2. Lumia 735 RM-1041 Added for Boot Repair via USB.
3. Lumia 735 RM-1041 Added to Nokia.ini
4. Added Lumia 640 XL Repair Boot via eMMC Connection
* Super Special Thanks to Babak Nuri for Contributing more than 60% of the new eMMC
Firmwares!
* Special Thanks to Edocomsel and SmartGSM for Contributing eMMC Firmwares for ATF
Team
KLM8G2FB3B-D001 : M8G2FB
KLM8G2FE3B-B001 : M8G2FB - First In The World
KLMAG2GE2A-A001 : MAG2GA - First In The World
KLMAG2GEAC-B001 : MAG2GC - First In The World
KLMAG2GEAC-B002 : MAG2GC - First In The World
KLMAG2WE4A-A002 : MAG2WA - First In The World
KLMAG2WEMB-B031 : AWMB3R - First In The World
KLMAG4FE4B-B002 : MAG4FB - First In The World
KLMAG4FEAB-B002 : AFEABB - First In The World - (GT-i9505)
KLMBG4GE4A-A001 : MBG4GA - First In The World
KLMBG4GEAC-B001 : MBG4GC - First In The World
KLMCG8GE4A-A001 : MCG8GA - First In The World
KMJ5U000WA-B409 : J5U00A
KMJ5U000WM-B409 : J5U00M - First In The World
KMJJS000WA-B409 : JJS00A
KMJJS000WM-B409 : JJS00M
KMK2U000VM-B604 : K2U00M - First In The World
KMK3U000VM-B410 : K3U00M - First In The World
KMK5U000VM-B309 : K5U00M - First In The World
KMK5W000VM-B312 : N5WZMB - First In The World
KMK5X000VM-B314 : K5XVMB - First In The World
KMK5X000YM-B314 : K5XYMB - First In The World
KMK7U000VM-B309 : K7U00M
KMK7X000VM-B314 : K7XVMB - First In The World
KMKTS000VM-B604 : KTS00M - First In The World - (SHV-E160S)
KMKUS000VM-B410 : KUS00M - First In The World
KMN5U000ZM-B203 : N5U00M
KMN5W000ZM-B207 : N5WZMB - First In The World
KMN9W000RM-B203 : N9WRMB - First In The World
KMS5U000KM-B308 : S5U00M - First In The World
KMSJS000KA-B308 : SJS00A
KMV2W000LM-B506 : V2W00M - First In The World
KMV3U000LM-B304 : V3U00M
KMVIS000LM-B503 : VIS00M - First In The World
KMVUS000LM-B304 : VUS00M - First In The World
KMVWU000LM-B900 : VWU00M - First In The World
* Most eMMCs Firmwares on this update are a result of commulative USER Requests on
this thread:
http://forum.gsmhosting.com/vbb/f609/request-here-samsung-emmc-firmwares-pinouts-
1941023/
Keep Requesting for more eMMC Part Numbers on that thread and we will keep
Supporting them!
--> Added "EXPERT" Mode when you make "expert.txt" file inside same folder as
AdvanceBox.exe
----> Expert Mode will bypass eMMC Part Number Security Question
----> Expert Mode will reveal "Samsung eMMC Firmware Update Only" Option
----> Expert Mode will increase your IQ by 3 points will make you really Smarter!
In case you are wondering if ATF Team is Still Uploading new SDC Files for Unbrick
via SD Card, take
a look at the new SDC Files we have uploaded during the past 20 Days...
*******************************
ATF JTAG v1.0.15 build 8544
*******************************
Change Log
--> Fixed Lumia 610, 610C, 510, and 505 WP7 Unlock via Read Codes
--> Added Manual Halt Delay at "Settings --> Halt delay"
--> Adjusted Various Timing Issues on Qualcomm CPU eMMC Read/Write
*******************************
Advance Turbo Flasher v12.30
*******************************
Introducing ATF Drive !!! 100% FREE FOR ALL ATF BOX USERS
First In the World Solution that will MOUNT eMMC Partitions as a Windows Removable
Disk!
Now you can Recover Data from a Dead Phone by Simply using Windows Explorer
"Search" and "Copy + Paste".
Special Features:
--> Supports Windows XP, Vista, 7, 8.0 and 8.1 (All 32-Bit and 64-Bit Versions)
--> You can load Partitions via Direct ISP eMMC Connection (4 wires + Vcc/VccQ) or
via eMMC Binary Dumps
--> Supports FAT12, FAT16, FAT32, exFAT, NTFS Windows Phone Partitions
--> Supports EXT2, EXT3 and EXT4 Android Partitions (1)
--> You can READ + WRITE to Mounted Partitions as if they were USB Drives on your
PC! (2)
--> Supports Recovery of Windows Phone 8.0/8.1/10 DATA Partition EVEN if MBR, GPT
and BOOTLOADERS are ERASED!
--> Faster READ/WRITE Speeds when compared with other Products
--> Supports MBR + GPT Partitions of Android and Windows Phones
(2) : WRITE Operations on EXT2, EXT3 and EXT4 are not Supported by FREE Software
Paragon EXTFS. If you want to WRITE to Android/Linux Partitions, you can
still do so "AT YOUR OWN RISK" via using another FREE Software named
Ext2Explore. More Information here:
http://sourceforge.net/projects/ext2read/
---> Added "Samsung eMMC Write CID" Function for writing Custom CID to Samsung
eMMCs
--> Windows Phone 8.0/8.1/10 Flasher now has an improved BUILT-IN BOOT REPAIR
Function via USB.
--> If your WP Phone is TOTALLY DEAD or HALF DEAD or TOTALLY ALIVE, ATF WILL FLASH
it via USB ONLY! (3)
(3) : Not all Phones can be Repaired via USB Cable Only. Some Phones might have a
buggy eMMC Inside which requires Direct EMMC Connection or JTAG to Repair.
BUG FIXES:
This allows FASTER LUMIA Flashing Procedure on Slower PCs. However, your Phone
might DIE if your FFU File is Corrupted. Anyway, you can still repair the phone
via USB Cable after your have Downloaded a NON-CORRUPTED FFU File.
*******************************
Advance Turbo Flasher v12.20
*******************************
*** WARNING: For Totally Dead eMMC + "Samsung eMMC Firmware Update Only",
*** ATF Team CANNOT GUARANTEE That Previous DATA inside eMMC can still be
*** recovered. Totally Dead eMMC is most likely a Result of a Corrupted
*** Firmware which in turn may also corrupt current DATA inside the NAND.
*** PLEASE DO NOT USE FIRMWARE UPDATE FOR FORENSIC PURPOSES !!!
Microsoft WP8/WP8.1/WP10 Flashing
--> Added Option to Prevent Flashing WP OS 8.1 or 10 to Phones with Samsung Brand
eMMC
----> Prevents Bricks and eMMC Write Protection Problems
--> Fixed "Skip CRC32 Checking for Lumia Phones"
----> If you want to skip CRC32 Checking of Lumia FFU Files, Goto:
Settings ---> Nokia Settings ---> UNCHECK "Skip Flash File Checksum Verification
Before Flashing"
*******************************
ATF JTAG 1.0.14 Build 7531
*******************************
Change Log
--> Fixed FFU File Flasher "File Load Error"
*******************************
Advance Turbo Flasher v12.10
*******************************
*******************************
Advance Turbo Flasher v12.00
*******************************
ATF Team is Celebrating our 5th Year Anniversary for the First ATF Chrome Metal Box
(Launched February 2010).
To Celebrate this Special Event, we are Now Launching a Very Special Limited
Edition 5-Year Anniversary GOLD BOX.
39 ATF JTAG Credits : Pre-Installed (This 39 U$D Value is FREE on This Box)
49 ATF Network Credits : Pre-Installed (This 49 U$D Value is FREE on This Box)
* It's GOLD :)
* USB 2.0 HS 480mbps
* Fastest JTAG Read/Write Speeds for Qualcomm CPUs (30 Mhz)
* Built-In VBATT Power Supply for Powering Phones during JTAG Procedures (4.20V on
RJ-45 PIN 1)
* Fastest eMMC Read/Write Speeds for Any CPU for 1-BIT @ SDR 15 Mhz
* Built-In eMMC Single Power Supply (3.00V on RJ-45 PIN 2)
* First in the WORLD eMMC Pinout Finder for Supported CPUs
* Built-In Micro SD Card Slot for:
---> Multi-Lingual SD Password Bruteforce (ATF is still the ONLY Box who can do
this...)
---> SD Card "Force Format"
---> Samsung SDC Unbrick Creator using Official Samsung TAR.MD5 BL Flash Files
---> SD Card Low Level Read/Write (Operating System Bypass)
---> SPI ISP Chip Programming with Built-In Power Supply
* Still the Fastest Nokia FBUS Flasher for 5 YEARS and Counting!
Bonus Material:
* Removes Permanent WP Bit on ALL Samsung Brand eMMC (First in The World)
---> Fixes "Unable to find a bootable Option." on Nokia/Microsoft Lumia Phones
(WITHOUT IMEI AND SIMLOCK DATA LOSS)
---> Fixes "eMMC is Read Only you cannot update your System" on Huawei Phones
(WITHOUT IMEI AND SIMLOCK DATA LOSS)
Currently Supported Samsung eMMC Models for Field Firmware Update (FFU)
BGA-169/153
NAME : PART NUMBER : Can be found on...
L5U00M : KML5U000HM-B505 : GT-i8262
M4G1FB : KLM4G1FE3B-B001 : ZTE U970/N970/V970/U930...
M8G1WA : KLM8G1WE4A-A001 : GT-i9082, GT-i9082L
MAG4FB : KLMAG4FE4B-B002 : GT-i747, GT-i747m, GT-i9305, GT-P6800, SCH-i935v, SCH-
i535, SGH-T999, SCH-R530, SCH-R530c
SJS00M : KMSJS000KM-B308 : GT-S5302, GT-S7500, GT-S6500D, Huawei G300...
VTU00M : KMVTU000LM-B503 : GT-N7100, GT-i9300
VUS00A : KMVUS000LA-B304 : GT-N7100, GT-i9300
BGA-162
NAME : PART NUMBER : Can be found on...
K8U00M : KMK8U000VM-B410 : China Phones
KJS00M : KMKJS000VM-B309 : SGH-T769,
NJS00M : KMNJS000ZM-B205 : Huawei G520-0000
ATF Professional eMMC Tool 3.0 Removes the time to wait for other JTAG/eMMC Boxes
to Support Your NEW Samsung Phone.
Just think about this Scenario when Customer Brings you an Unsupported NEW Phone
for Boot Repair...
1. Disassemble the Phone and Locate the eMMC Pinout using ATF eMMC Test Point
Finder
For More Information, Check here:
http://forum.gsmhosting.com/vbb/f609/atf-emmc-test-point-finder-tutorial-
1908984/#post10829268
2. Download Official Samsung TAR.MD5 BL Flash File or ALL-IN-ONE Flash File from
the Internet
3. Write this flash file via eMMC Connection using ATF eMMC Tool
No need to blah blah in forum "Please Support this Phone XX-XXX"... You can do the
JOB on your OWN! - FEEL THE REAL POWER
Q: Can I use Large ALL-IN-ONE TAR.MD5 Files which I downloaded freely from
Internet?
A: Yes, just as long as the ALL-IN-ONE File have complete BOOTLOADERS Inside.
Q: I don't want to PAY... Will ATF Team upload these BL Files in their Server for
End Users to Download?
A: Yes, but as of now we are still busy COLLECTING BL Files.
Q: Will writing official TAR.MD5 revive my phone which was killed by Wrong
Unlocking Methods?
A: Depends on Phone Model and Security Level. We found newer phones have difficulty
reviving after Wrong Unlocking Methods.
Q: Will it fix MBR, GPT, PIT problems like when a Brand New BLANK eMMC is used?
A: Yes, it has a "Re-Partition" Option like ODIN... Provided you have the correct
PIT File for your Phone.
Q: So NEW Samsung Phones are Supported... But how about OLDER Samsung Phones?
A: Currently only Samsung Android Phones using GUID Partition Tables are supported.
Q: Will ATF Professional eMMC Tool (APeT) always be FREE for ALL ATF End Users?
A: For Now Yes... But further research on newer More Expensive Phones might require
us to charge a small fee for practical reasons.
Q: I always have problems connecting eMMC on Phone PCB, what do you think is my
Problem?
A: If the problem is not your SKILL, then it is your eMMC Power Adapter. Try to use
Original SmartGSM 4-in-1 V2 Adapters.
*******************************
Advance Turbo Flasher v11.90
*******************************
LogiCore 11.0.10
* Added FIRST-IN-THE-WORLD eMMC Test Point Finder/Locator Engine
* Improved eMMC Read/Write Speeds
* Added more VCCIO Level Adjustments options
[ATF Plus]
[GENERAL UPDATES]
*******************************
Advance Turbo Flasher v11.88
*******************************
What's Cooking?
Lumia WP8/WP8.1 BOOT Repair via USB is now Supported for Retail Lumia Phones:
Lumia 920 (RM-820, RM-821, RM-867)
Lumia 820 (RM-824, RM-825)
Lumia 620 (RM-846)
Lumia 928 (RM-860)
Lumia 1020 (RM-875, RM-876, RM-877)
Lumia 720 (RM-885, RM-887)
Lumia 925 (RM-892, RM-893, RM-910, RM-955)
Lumia 520 (RM-913, RM-914, RM-915, RM-917)
Lumia 625 (RM-941, RM-942, RM-943)
Lumia 1320 (RM-994, RM-995, RM-996)
Lumia 525 (RM-997, RM-998)
The procedure is very simple, just Flash the Phone like you Normally would without
clicking any more additional options. ATF will detect your phone's current STATE
and will perform the necessary Tasks to Revive it.
Please make sure that YOU MUST USE ONLY the 'Nokia Emergency Connectivity" Drivers
because as for now, any other 9008 drivers such as Qualcomm and Zeus (Sony) it not
supported for USB BOOT Repair.
You must also click "UPDATE IMPORTANT FILES" so that you will be able to download
the MPRG Loaders that will be used for USB BOOT Repair.
*******************************
Advance Turbo Flasher v11.80
*******************************
*** WARNING: DO NOT CROSS-FLASH NOKIA XL 4G RM-1061 with other Nokia XL RM-xxxx
***
--> Added Support for Nokia X2 (RM-1013)
----> Added Secure ADB Connection
----> Dead Mode, Normal Mode, Recovery Mode Flashing
----> Support Both Qualcomm and Nokia USB Drivers
----> 1 Click ROOT
----> 1 Click Google Apps + Launcher Installer (NO NEED ROOT)
----> Added FULL IMEI/Simlocks/EFS Backup + Restore (NO NEED ROOT)
Added Nokia Lumia WP8.1 and Android Dead Boot Repair via eMMC (October to November
2014 Files)
http://forum.gsmhosting.com/vbb/f609/all-nokia-lumia-android-dead-boot-repair-
files-direct-links-1830880/
Lumia 830 RM-983 [02040.00012.14404.07019] [BIG BOOT] <-- eMMC Tool Exclusive!!!
Lumia 830 RM-984 [02040.00005.14372.54001] [BIG BOOT] <-- eMMC Tool Exclusive!!!
Lumia 830 RM-985 [02040.00005.14373.00002] [BIG BOOT] <-- eMMC Tool Exclusive!!!
Lumia 830 RM-1049 [02040.00012.14404.07005] [BIG BOOT] <-- eMMC Tool Exclusive!!!
[Samsung Updates]
Factory Boot - Qualcomm USB Boot Repair 1.0 (Initial Public Release)
--> Added Initial Suport for Samsung GT-i9505 (Galaxy S4 LTE)
----> This will BOOT Repair Phones which cannot be Repaired via SDC or JTAG
----> ONLY USB CONNECTION NEEDED (NO OPENING/SOLDERING OF PHONE)
SM-G7109 = SM-G7109_4.3_8GB_G7109KEUBNG1.sdc
SM-N910P = SM-N910P_4.4.4_16GB_N910PVPU1ANIE.sdc
SM-N910T = SM-N910T_4.4.4_16GB_N910TUVU1ANJ7.sdc
SM-N910U = SM-N910U_4.4.4_2GB_N910UXXU1ANJ5.sdc
SM-N9108V = SM-N9108V_4.4.4_16GB_N9108VZMU1ANIG.sdc
SM-N7506V = SM-N7506V_4.3_16GB_N7506VZNUAND2.sdc
[GENERAL UPDATES]
*******************************
Advance Turbo Flasher v11.70
*******************************
*** ALL ATF Software Below 11.70 WILL NO LONGER WORK WITH ATF NETWORK ***
*** SO FROM NOW ON, PLEASE USE ONLY 11.70 and NEWER ATF SOFTWARE ***
Added Nokia Lumia WP8.1 and Android Dead Boot Repair via eMMC (September 2014
Files)
http://forum.gsmhosting.com/vbb/f609/all-nokia-lumia-android-dead-boot-repair-
files-direct-links-1830880/
(For Demonstration Purposes Only... ALL SM-G7102 can be UNBRICKED via SDC)
Samsung SM-G7102 Galaxy Grand 2 4.4.2 G7102XXUBNH6 4-WIRES ONLY
*** Take note that "via eMMC" Files are 100% FREE and NO NEED ACTIVATION!
*** Make sure both RED (CLK) and YELLOW (RCLK) are Connected Together in order to
*** for these new Qualcomm Halt Types to WORK.
For Phones with new eMMC 4.5 and RCLK Support, please make sure you use
YELLOW (RCLK) on the correct TP to ensure correct timing. Example on phone
like SM-P605.
*** Not ALL APQ8060/APQ8060A Phones are supported for SDC Unbrick
*** Only Phones with GUID Partition Tables are supported
[Nokia Android]
--> Added New VID/PID for newer Nokia Android Phones
--> Automatically BLOCKS V2 Flash Files when V1 LIVE Phone is Detected
[BB5 Updates]
--> Faster Nokia BB5 SL3 Authorize Phone
*******************************
ATF JTAG 1.0.12 Build 5634
*******************************
*** ALL ATFJ Software Below 1.0.12 WILL NO LONGER WORK WITH ATF NETWORK ***
*** SO FROM NOW ON, PLEASE USE ONLY 1.0.12 and NEWER ATFJ SOFTWARE ***
Change Log
--> Uses new ATF Servers
--> Added Support for APQ8060/APQ8060A CUSTOM Read Write eMMC
--> Added Support for External 4.0v Power on VBATT for Phones which need Battery
during JTAG
----> Very Useful for APQ8060/APQ8060A Samsung LTE Phones
----> Just Connect RJ-45 PIN 1 (VBATT) to Battery (+) of Phone
--> Fixed HALT Timing for newer MSM8225/MSM8225Q SOC Revisions
----> This will now work on Nokia X, XL and X+ which was "No Devices Found"
Before
--> Added ALL BOOT Versions for BOOT REPAIR Nokia X, XL and X+ (via JTAG)
*** You can download these Files via ATFJ.exe ---> Help ---> Updates
*******************************
Advance Turbo Flasher v11.60
*******************************
Added Nokia Lumia WP8.1 and Android Dead Boot Repair via eMMC (July 2014 Files)
http://forum.gsmhosting.com/vbb/f609/all-nokia-lumia-android-dead-boot-repair-
files-direct-links-1830880/
*** Take note that "via eMMC" Files are 100% FREE and NO NEED ACTIVATION!
Samsung Unbrick Image Creator 2.0
--> Added Automatic Detection of Required SD Card Size
--> Fixed Missing Partitions on APQ8060 and MSM8930 PIT Files
--> PIT Info (OPEN RESIZABLE or CLOSED NON RESIZABLE) now shown in LOGS
--> Number of Partitions written Now Shown in Logs
--> Intended Default eMMC Size Now Shown in Logs
*** Please note that an "OPEN" PIT file means SDC File will work with any
*** eMMC Size (4GB, 8GB, 16GB, 32GB, 64GB 128GB etc...) and a
*** "CLOSED" Pit file means SDC File will only work with a specific eMMC SIZE.
Try Out New SDC Unbrick Files Created by Image Creator 2.0
http://www.4shared.com/folder/w9n0Nuo7/SAMSUNG_SDC_FILES.html?
detailView=true&sortAsc=false&sortsMode=TIME
GT-I9295_4.2.2_16GB_I9295XXUBML3.sdc
GT-I9295_4.4.2_16GB_I9295XXUCNF1.sdc
GT-I9505_4.2.2_16GB_I9505XXUBMEA.sdc
GT-I9505_4.3_16GB_I9505XXUEMKF.sdc
GT-I9505_4.4.2_16GB_I9505XXUFNBA.sdc
GT-I9505G_4.2.2_16GB_I9505GUEUAMFD.sdc
GT-I9507_4.2.2_16GB_I9507ZHUAMJ1.sdc
GT-I9507V_4.2_16GB_I9507VZNUANB3.sdc
SC-04E_4.3_32GB_SC04EOMUBNC3.sdc
SCH-I535_4.0.4_32GB.sdc
SCH-I535_4.0.4_16GB.sdc
SCH-I535_4.3_16GB.sdc
SCH-I535_4.3_32GB.sdc
SCH-I535_4.3_64GB.sdc
SCH-I545_4.3_16GB_I545VRUEMK2.sdc
SCH-I545_4.4.2_16GB_I545VRUFNC5.sdc
SCH-R970_4.2.2_16GB_R970TYUFND1.sdc
SCH-R970_4.3_16GB_R970TYUEMK2.sdc
SCH-R970C_4.3_16GB_R970CVRUEMK4.sdc
SCH-R970C_4.4.2_16GB_R970CVRUFND1.sdc
SGH-I337_4.3_16GB_I337UCUEMK2.sdc
SGH-I337_4.4.2_16GB_I337UCUFNB1.sdc
SGH-I337M_4.2.2_16GB_I337MUMUAMJ1.sdc
SGH-I337M_4.3_16GB_I337MUMUEMK6.sdc
SGH-I337M_4.4.2_16GB_I337MUMUFNE2.sdc
SGH-I337Z_4.4.2_16GB_I337ZTUUBNE2.sdc
SGH-I537_4.2.2_16GB_I537UBUAMG2.sdc
SGH-I537_4.3_16GB_I537UCUBML2.sdc
SGH-M919_4.3_16GB_M919UVUEMK2.sdc
SGH-M919_4.4.2_16GB_M919UVUFNB4.sdc
SGH-M919N_4.3_16GB_M919NUVUEMK5.sdc
SGH-M919V_4.3_16GB_M919VWXUEML3.sdc
SGH-M919V_4.2.2_16GB_M919VWXUAMH1.sdc
SGH-M919V_4.4.2_16GB_M919VWXUFNE2.sdc
SGH-S970G_4.2.2_16GB_S970GUDUAMH3.sdc
SGH-N075_4.3_32GB.sdc
SM-G7102_4.3_8GB_G7102XXUANE2.sdc
SM-P605_4.3_16GB_P605XXUBMJ9.sdc
SM-P605_4.4.2_16GB_P605XXUCNF2.sdc
SM-S975L_4.3_16GB_S975LUDUANB1.sdc
SPH-L720_4.4.2_16GB_L720VPUFNAE.sdc
SPH-L720T_4.3_16GB_L720TVPUAMK5.sdc
SPH-L720T_4.4.2_16GB_L720TVPUBNC6.sdc
*** If Unbrick via SDC Does not work, you can try Unbrick via JTAG which is
already
*** Supported by ATF JTAG 1.0.10 :)
OR MAYBE YOU WANT FREE ACTIVATION? Check our forum here for more INFO:
http://http://forum.gsmhosting.com/vbb/f609/
*******************************
Advance Turbo Flasher v11.50
*******************************
Nokia Android
--> Added Full IMEI/Simlock Backup/Restore for Nokia X/X+/XL including "V2"
Devices
--> Added Support for Writing Back MODEM_FSG via Partition Restore
--> Updated TWRP Recovery Image for ROOTING
--> Full Rooting for ALL Currently Released Nokia Android Phones
--> Full Google Services Installation Support for all Released Nokia Android
Phones
--> Fixed Firmware Flashing Stall Issues (Thanks to Beta Testers)
Samsung GT-I8150
Samsung GT-I8150B
Samsung GT-I8150T
Samsung GT-I8260
Samsung GT-I8260E
Samsung GT-I8260L
Samsung GT-I8262
Samsung GT-I8262B
Samsung GT-I8262D
Samsung GT-I8350
Samsung GT-I8550L
Samsung GT-I8550E
Samsung GT-I8552
Samsung GT-I8552B
Samsung GT-I8700
Samsung GT-S6310
Samsung GT-S6310L
Samsung GT-S6310N
Samsung GT-S6310T
Samsung GT-S6312
Samsung GT-S7560
Samsung GT-S7560M
Samsung GT-S7562
Samsung GT-S7562L
Samsung GT-S7572
Samsung SCH-W789
Samsung SCH-I829
Samsung SGH-T679
Samsung SGH-T679M
--> Added ATF JTAG Scripting Language
Supports Manual Debugging of Snapdragon SOC Modem Core
--> Initial Documentation Released
--> http://www.advace-box.com/jtag/ATF_JTAG_SCRIPTING_MANUAL.pdf
[General Updates]
--> Complete Product Listing in Nokia.ini as of May 31, 2014
(Nokia X+, Nokia XL, Lumia 630, Lumia 635 and Lumia 930 were added)
*******************************
Advance Turbo Flasher v11.30
*******************************
Release Date: April 24, 2014
Firmware Version Required : 11.0.00
eMMC Repair Files are packed with HIGH RESOLUTION eMMC TP Pictures and
all the Partitions needed to recover your phone into a BOOTABLE STATE
Windows Phone 8
--> Fix some Test Mode 'FBUS' Bug when performing Self Tests
--> Internal Testing for 'Interop' Unlock via JTAG Launched
Android X
--> Fixed WinUSB Timeout Error
Other Changes
--> Complete Product Listing in Nokia.ini as of April 24, 2014
Special Thanks
--> For this update we give special thanks to lordmaxey who
pioneered Lumia WP8/WP8.1 Full Interop Unlock via ATF JTAG
*******************************
Advance Turbo Flasher v11.20
*******************************
ATF Uses a Built-in ADB Layer and it will Shutdown any Running
ADB Servers on your PC if it finds anything running. You DO NOT
NEED TO INSTALL ADB and FASTBOOT. You DO NOT NEED tO enter any
codes to the phone just to read phone info :) Just install the
correct Nokia X Drivers from:
C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X_USB_DRIVERS\
Other Changes
--> Fixed ATF JTAG Activation Button
--> Complete Product Listing in Nokia.ini as of April 7, 2014
Special Thanks
--> For this update we give special thanks to WAJID who tested Nokia X Rooting
--> Special thanks to Chainfire for a WONDERFUL SuperSU.apk
--> Special thanks to KashaMalaga for preparing the Google Services Tweak
*******************************
Advance Turbo Flasher v11.10
*******************************
Special Thanks
--> For this update we give special thanks to lemor who helped Develop + Test
the Samsung SDC Unbrick Image Creator.
--> Also special thanks to Angel for BETA Testing the SDC Image Creator.
1. You need more than 4GB RAM on your PC if you want to use BIG TAR+MD5 Samsung
Files (2GB Above)
2. Some Exynos Phones still need to Connect TP Area A and B to force phone into
SDCARD MODE
3. SDC Unbrick will only give you DOWNLOAD MODE... You need to flash correct
files with
ODIN after the SD Card allowed you to enter DOWNLOAD MODE on a Bricked Phone
4. SD CARD UNBRICK IMAGE CREATOR is 100% FREE for ATF USERS (ACTIVATION IS FREE)
5. If Phone eMMC Chip is Damaged, then SDC UNBRICK CANNOT FIX IT!
[Samsung Supported Phones for SDC Unbrick Image Creator + Test Point]
[Exynos 5410]
Samsung GT-i9500 Galaxy S4 (Samsung Altius)
Samsung GT-i9502 Galaxy S 4 Duos / Galaxy S IV (Samsung Altius)
Samsung SHV-E300K Galaxy S4 LTE (Samsung Altius)
Samsung SHV-E300L Galaxy S4 LTE (Samsung Altius)
Samsung SHV-E300S Galaxy S4 LTE (Samsung Altius)
[Exynos 5420]
Samsung SM-N900 Galaxy Note 3
Samsung SM-N9000Q Galaxy Note 3
Samsung SM-P600 Galaxy Note 10.1 2014
Samsung SM-P601 Galaxy Note 10.1 2014
Samsung SM-P900 Galaxy NotePRO 12.2 WiFi
Samsung SM-P901 Galaxy NotePRO 12.2 3G
Samsung SM-T320 Galaxy TabPRO 8.4 WiFi
Samsung SM-T520 Galaxy TabPRO 10.1 WiFi
Samsung SM-T900 Galaxy TabPRO 12.2 WiFi
[Exynos 5260]
Samsung SM-N7505 Galaxy Note 3 Neo LTE+
Samsung SM-N750K Galaxy Note 3 Neo LTE+
Samsung SHV-E510S Galaxy Note 3 Neo LTE+
*******************************
Advance Turbo Flasher v11.00
*******************************
LogiCore 11.0.00
* ULTRA FAST SD Card Password Brute Force Speed Upto 20,000 Passwords Per
Second on Class 10 Cards
* 6000% Speed Increase in SD Card Password Brute Force Speed Compared to
LogiCore 10.8.30
* Absolutely the Fastest SD Card Password BF Solution in the World
* Added SD Card RAW Read/Write Module with upto 2 MBPS Transfer Rate
* Big Improvement on eMMC TP Write Speed (6000% Speed Increase) with upto 2MBPS
Transfer Rate
* Big Improvement on ATF JTAG Speed with Turbo JTAG Technology upto 30 Mhz
usable TCK Speed
[ATF Plus]
* Added SDC Tool - Direct RAW Read/Write for micro SD Cards
* Direct Write Samsung Debrick Images for Supported Qualcomm Based Phones
--> UN-BRICK / REPAIR DEAD BOOT Phones WITHOUT JTAG!!!
* Read/Write Speeds upto 2 MBPS
* Automatic Fatory Erase Before Writing
* Automatic Verify Written Blocks
* Supports ATF Big SD Card Slot or ATF Micro SD Card Adapter Cable
* Adjustable Speed from 5 Mhz to 30 Mhz
* Supports SDHC and SDXC Cards (Upto 2TB Size)
* Adjustable VCCIO (1.80v, 2.80v or 3.30v)
* Custom Read/Write Address
* Selectable BLOCK Addressing or NON-LBA Addressing
* Supports sdc, img, bin or raw Formats
[Intel/Infineon XG221]
RM-934 : Nokia Asha 500 Dual SIM
RM-973 : Nokia Asha 500
* Added XG221 Full Flashing
* Added XG221 Mass Memory Flashing
* Added XG221 Backup RPL etc...
* Added XG221 Decrypt PM 120 HASH for 15-Digit Phones
[Driver Updates]
* New ATF Box Signed Drivers for 32/64 Bit Windows XP, 7 and 8 (Version
2.8.30.0)
* New Nokia Connectivity Cable Driver (Version 7.1.182.0)
* New WinUSB Extensions for 32/64 Bit Bit Windows XP, 7 and 8
[Server Updates]
* RSA Signing Server for ATF Exe now Implemented Starting with ATF v11.00
[General Updates]
* Complete Product Listing in Nokia.ini as of February 3, 2014
* Complete WP7/WP8 Variant Listing as of February 3, 2014
[IMPORTANT ANNOUNCEMENTS]
1. ATF New Driver DOES NOT SUPPORT Older ATF Software Versions (Anything Below
v11.00)
2. LogiCore 11.0.00 DOES NOT SUPPORT Older ATF Software Versions (Anything
Below v11.00)
3. You need to be Connected to the Internet "THE FIRST TIME" you run
AdvanceBox.exe v11.00
*******************************
Advance Turbo Flasher v10.60
*******************************
[ATF JTAG]
* Added Lumia 525 RM-998 BOOT Repair
* Added Lumia 900 RM-808 and RM-823 MODEM BOOT Repair (Fixes "White Screen
Hang")
* Added Lumia 900 RM-808 and RM-823 MODEM EFS Repair (Fixes "Logo Hang" or
"Rethink Possible")
* Added Lumia WP8 BOOT CHECK (Reads BOOT Info from Phone)
* Revised Lumia WP8 BOOT Repair with Auto-Detect NEW and OLD BOOT Repair
* Added Cherry Mobile Flare 2X
* Fixed 610, 610C, 510 and 505 "Not Detected Timeout" problem on some PC
* Fixed Lumia 900 Counter Reset during read codes
Download Links:
[Infineon XG618]
* Added XG618 Decrypt PM 120 HASH for 15-Digit Phones
RM-839 : Nokia 301/3018
RM-840 : Nokia 301/3018
RM-841 : Nokia 301/3018
RM-948 : Nokia 208
RM-949 : Nokia 208 DS
RM-950 : Nokia 208
RM-952 : Nokia 515
RM-953 : Nokia 515
RM-954 : Nokia 207
RM-956 : Nokia 208 DS
RM-957 : Nokia 208
[Infineon XG110]
* New FBUS Flashing Engine which allows Non-Sequenced Flash File Flashing
example: Flash only PPM or CNT or MCU
[WP7]
* Added Lumia 610 NFC eMMC TP Pinout
[WP8]
* Added Test Mode Selection for WP8 Phones (NCSD or FBUS)
* Preliminary Support for SX-4 Authorize via Original Server for WP8 Phones
* Preliminary Support for NVI write after Authorize for WP8 Phones
[General Updates]
* Complete Product Listing in Nokia.ini as of December 31, 2013
* Complete WP7/WP8 Variant Listing as of December 31, 2013
###################################################################################
####
We would like to extend our Thanks and Gratitude to all our END USERS, RESELLERS
and SUPPORTERS for making 2013 a very successful and fruitful year for ATF Team.
We hope you will always continue to support us in the years to come! Happy New
Year!!!
###################################################################################
####
*******************************
Advance Turbo Flasher v10.50
*******************************
[Infineon XG110]
* Added Nokia 105 / 106 Read Flash File Directly From Phone
* Added Nokia 105 / 106 PMM Recovery via Flash Mode (Read PM via Flash Mode)
* Added Nokia 105 / 106 Custom Read Flash SPI Chip
* Added Nokia 105 / 106 Decrypt PM 120 Hash
* Now you can read MCU, PPM, CNT Files Directly from 105 and 106 Phones
via Regular FBUS Cables. For Phones with Software Problems such as HANG
and REBOOTING, you just need to Flash the same MCU Version to the phone.
You do not need to flash PPM and CNT.
[General Updates]
* Complete Product Listing in Nokia.ini as of December 05, 2013)
* Complete WP7/WP8 Variant Listing as of December 05, 2013
*******************************
Advance Turbo Flasher v10.40
*******************************
[ATF JTAG]
* Unlock Lumia WP7 Phones via Reading PIN and PUK Codes
Supported Models:
Lumia 610 : RM-835
Lumia 610 : RM-849
Lumia 610C : RM-835
Lumia 510 : RM-889
Lumia 510 : RM-898
Lumia 505 : RM-923
[General Updates]
* Complete Product Listing in Nokia.ini as of November 27, 2013)
* Complete WP7/WP8 Variant Listing as of November 27, 2013
[Bug Fixes]
* Removed eMMC Communication Debug Messages
* Removed WP7 Communication Debug Messages
*******************************
Advance Turbo Flasher v10.30
*******************************
[ATF JTAG]
* Added New BIG BOOT FILES for all Lumia Phones
* Added Lumia 1020 BOOT REPAIR Support
[Infineon]
* Added Read Flash File Option for Infineon XG110 FBUS Phones
--> This will read MCU, PPM and CNT in Regular FLS Format (Including VPL)
--> Currently very useful for Nokia 107 RM-961
* Added Read Flash File Custom Address and Full Flash
* Added Dead Phone Read PM Area via Recover PMM Area (PM File)
[BB5]
* Fixed UDA Flashing on Latest Belle Releases
[General Updates]
* Complete Product Listing in Nokia.ini (as of October 24, 2013)
[Bug Fixes]
* Fixed Infineon XG110 FBUS Flashing "Hang" on Factory Reset
* Fixed Infineon XG110 FBUS PMM and CNT Quick Erase
*******************************
Advance Turbo Flasher v10.20
*******************************
[ATF JTAG]
[WP8]
* Fixed WP8 SimLock Status and Network Provider Reading
* Added Full Variant Listing as of September 24, 2013
[WP7]
* Added Full Variant Listing as of September 24, 2013
[Infineon]
* Added New RM-841, RM-948, RM-949, RM-950, RM-952, RM-953 and RM-954 Loaders
[General Updates]
* Complete Product Listing in Nokia.ini (as of September 24, 2013)
*******************************
Advance Turbo Flasher v10.10
*******************************
LogiCore 10.3.80
* Fixed SD Card Bruteforce Communication Bug
* Increased JTAG Activation Time Out
* Improved Toshiba eMMC Handling for ATF Chrome Boxes
[ATF JTAG]
[WP7]
* Added Support for flashing Original Nokia Factory OSBL Files (NO TP QCOM
OSBL)
[BB5]
* Added Firmware Check notification when flashing phones via FBUS or USB
[Infineon XG223]
* Added LifeTimer Read/Write/Reset for new XG223 phones (501, 309, 308...)
* Improved XG618 Buscheck Detection
[General Updates]
* Added "Restore EEPROM" button in Box Tools tab
- You can use this button instead of using MPROG or FT_PROG
* Complete Product Listing in Nokia.ini (as of August-31-2013)
*******************************
Advance Turbo Flasher v10.00
*******************************
[ATF JTAG]
ATF JTAG Initial Phone Support List (All Lumia WP8 Released Phones):
[Infineon XG213]
[WP8]
[WP7]
[BB5]
[DCT4]
* Fixed DCT4 RPL via Server Problem "You do not have free credits..."
Supported Phones:
Asha 301/3018 RM-839 - Fully Tested
Asha 301/3018 RM-840 - Fully Tested
Asha 301/3018 RM-841 - Not Yet Released
Other Future XG618 Phones
Supported Operations:
Normal Firmware Flashing
Downgrade Firmware Flashing
Backup RPL
Read/Write PM and PP
*** Warning: DO NOT CROSS FLASH these phones. Always Flash with correct RM-XXX
***
What's New ?
Bug Fixes:
* Fixed Read Firmware Information for Manually Loaded Flash Files (NON VPL)
* Fixed bug that does not automatically select USB connection on ATF Startup
* Fixed bug on Scan Phone that makes some new Rapuv2 phones reboot and fails to
read Simlock Data (Nokia 500, 311 etc)
Other Stuff
Known Limitations:
* Firmware Version Check via Flash Mode does not support ADL Flashing
*******************************
Advance Turbo Flasher v9.80
*******************************
Supported Phones:
Lumia 520T RM-913
Lumia 520 RM-914
Lumia 520 RM-915
Lumia 521 RM-917
Lumia 620 RM-846
Lumia 720 RM-885
Lumia 720T RM-887
(Hint: RPL and Simlocks are inside a FAT12 Mountable Partition called DPP)
Added Test Point Pictures for 520T, 520, 521, 620, 720 and 720T
What's New ?
Bug Fixes:
Other Stuff
My Wife for editing the Test Point Pictures for the new Lumia Windows 8.0 Phones.
*******************************
Advance Turbo Flasher v9.70
*******************************
More info about ATF JAM and ATF SAM will be released very soon!
What's New ?
* Added "Create ENO FPSX" button in 'Read Flash' tab which will allow
you to extract ENO Blocks from FLASH DUMPS made by ATF Software. The
resulting ENO File will be in Plain FPSX format and can be used on
phones which have the same ROOT_KEY_HASH as the original FLASH DUMP.
Bug Fixes:
Other Stuff
* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of March-25-2013)
* Complete Product Listing in Nokia.ini (as of March-25-2013)
For this Update we give Special Thanks To:
*******************************
Advance Turbo Flasher v9.60
*******************************
"Lumia TP Updates"
What's New?
* Skipped checking SRP and iOS Service Cost during Phone Authorize
* Fixed Simlock Recovery Bug on phones with APE NAND Flash Chips
Other Stuff
* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of Feb-28-2013)
* Complete Product Listing in Nokia.ini (as of Feb-28-2013)
******************************************
* LogiCore 10.3.50 OPEN BETA COMING SOON *
******************************************
What's New?
Other Stuff
* Complete Variant Listing for Lumia Win7 and Win8 Phones (as of Jan-22-2013)
* Complete Product Listing in Nokia.ini (as of Jan-22-2013)
A Friendly Reminder
############################################################################
## #
## YOU HAVE 1 MORE WEEK TO DOWNLOAD FLASH FILES VIA NAVIFIRM #
## #
############################################################################
*******************************
Advance Turbo Flasher v9.40
*******************************
Now you can Write Back your Original PM 308 Phone Backups back to the Phone!
But if you don't have PM 308 backup, then you can use Repair CMLA Key to allow
your phone to run the Latest Symbian Belle OS Releases. This Second option allows
you to to write CMLA Keys to any SL3 Phone even without PM 308 backup.
Q: I cannot find this new feature in ATF 9.40, how do I use it?
A: It is completely integrated into the ATF Software, so just use "Write PM"
function in ATF Software.
Q: Do I need to AUthorize Phone First before I can use this new feature?
A: Yes, the phone needs to be Authorized by The ATF Network if your phone is "New
HASH".
Other Updates:
- Added RM-862, RM-863, RM-864, RM-872 and RM-873 for Infineon/Intel XG213 Decrypt
PM 120 HASHES
- Added New Nokia Products in Nokia.ini
- Fixed Minor BB5 USB Booting from 9.30
*******************************
Advance Turbo Flasher v9.30
*******************************
[MAJOR UPDATE]
If you have a Lumia 710 with DLOAD OSBL, you can flash the Phone via USB to get
Qualcomm OSBL.
If you have a Lumia 800 with DLOAD OSBL, you need to use TP Method and write QCOM
OSBL via TP.
If you have Lumia Lumia 510, 610 or 900, then you cannot use eMMC Direct Module on
them.
***********************************************************************************
***********
*************************** IMPORTANT INFORMATION
**********************************
***********************************************************************************
***********
- You need "Administrator Rights" if you want to use the eMMC Direct Module.
You need to do this everytime you want to use the eMMC Direct Module
***********************************************************************************
***********
***********************************************************************************
***********
***********************************************************************************
***********
*******************************
Advance Turbo Flasher v9.20
*******************************
[MAJOR UPDATE]
Full Product Firmware Flashing via USB Connection with valid FFU Signed Images
Supports Live Phone, DEAD Phone and RED Phone* Flashing
Full Product Info Reading including Lock Status and Original Provisioner Settings
Variant Information displayed during Live Phone Scan
Phone Type will now be Automatically Selected after Live Phone Scan
Ability to Switch from NCSD Mode to Test Mode aka FBUS MODE
--> In FBUS MODE, Self-Tests and Some Scan Phone Items are available.
[Infineon XG213]
Decrypt PM 120 Hashes for LBF of XG213 Based Infineon Phones
Show Infineon XG213 Keypress and FBUS Counters
Reset Lock Counters for XG213
XG213 Send 15-digit or 20-digit Code via FBUS Frame
LBF Files SKIP SAVE if 20-digit or Phone does not accept NCK Input
Automatically Backup XG213 Certificates in Plain RPL Format during Prior to
Flashing
XG213 Write RPL Certificates
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)
Fixed "Quick/Shortcut Erase" Bug when flashing "Contact Service" Phones
[Infineon XG223]
Fixed XG223 RPL Certificate Backup Sizes (Asha 308, 3080, 309 and 3090)
Enabled XG223 Write RPL and Custom Fash Chip Erase Address
Show Second IMEI Info for Dual Sim Phones (Scan Phone and Backup RPL)
[General Updates]
New ATF Box Signed Drivers for 32/64 Bit Windows XP, 7 and 8
New BB5 Flash Loaders 12.33.000.3
New WinUSB Lumia Drivers (Supports Windows 8)
New Nokia Connectivity Cable Driver 7.1.92.0 (Supports All Current Nokia Phones)
[User Requests]
Angel - Product Type (RM-XXX) now saved in PM and PP Backup Filenames
RED Phone - Phone is showing a dark RED Tint with NOKIA Logo Only
*******************************
Advance Turbo Flasher v9.10
*******************************
* Repair DEAD BOOT Lumia 800 Phones killed by Windows "Format Disk"
* Repair DEAD BOOT Lumia 710 Phones killed by Windows "Format Disk"
* Repair DEAD BOOT Lumias Killed by other methods
* Direct Write of SEC_BOOT, OSBL, QBOOT and AMSS Images
* Direct Write of QUALCOMM Unlocked OSBL to Lumia 800
* SP Unlock ANY Lumia 710 and 800 version and OSBL Type (QCOM or DLOAD)
* Cross-Flash 800C and 610C into 800 and 610 Variants to accept non RUIM Cards
* Supports Lumia 610, 610C, 710, 800, 800C and 900 (First Generation Lumias)
Introducing The New LogiCore 10.3.30 Firmware for ATF Chrome, ATF Lightning and
Nitro Boxes
IMPORTANT INFORMATION:
For SIMLOCK Recovery Level 3, This New Update 9.10 will NOT be able to
use your old SL3 BF Credits for SRP File Uploading. It will be using
the New Simlock Recovery Credits (SRP Credits).
If you want to continue using your SL3 BF Credits to upload SRP Files,
then you are given 2 weeks to use it with the older ATF exe (9.02 and
lower). Starting October 2012, we will NO LONGER accept SRP File Uploads
using SL3 BF Credits.
*******************************
Advance Turbo Flasher v9.00
*******************************
Introduction:
In the past, when a dead Nokia BB5 SL3 Phone comes to your shop, it was only
possible for you to backup the IMEI via a Backup RPL Function. There was no
way for you to backup a possibly 100% working SIMLOCK inside the phone because
you needed Local/Test Mode in order to get the PM Backups. Dead Phones cannot
give you Local/Test Mode at all, so you cannot backup the Simlocks even if you
wanted to.
Now here comes the Solution... The ATF Simlock Recovery Module v1.0 will allow
you to BACKUP SIMLOCKS from a DEAD PHONE! Just a 1-click solution for Recovery
Level 1 and Level 2 for NON-CORRUPTED SIMLOCKS on a DEAD PHONE.
Even if your phone SIMLOCKS are CORRUPTED, The ATF Network can still attempt to
perform a Level 3 Recovery from it, but it will cost you some ATF SL3 Credits.
Recovery Level 1
* FREE for ALL ATF BOX Users (DOES NOT NEED CREDITS or ATF NETWORK ACTIVATION)
* Phone DOES NOT need to be AUthorized
* 100% Stand Alone
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and
BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and
BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from DUMP FILE or from Connected PHONE
* Super Fast Recovery, BUT SIMLOCKS WILL NOT BE VERIFIED
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 70% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP
Recovery Level 2
* FREE for ALL ATF Network Users (DOES NOT NEED CREDITS)
* Phone NEEDS to be Authorized via The ATF Network
* Stand Alone ONLY AFTER PHONE IS AUTHORIZED via The ATF Network
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and
BCM21351
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and
BCM21351
* Supports ALL SL3 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY + RECOVER ORIGINAL
SIMLOCKS if SIMLOCKS are OVERWRITTEN)
* Supports ALL SL2 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports ALL SL1 NOR Blocks for RAP3Gv3 (FULL PM RECOVERY)
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recover from Connected PHONE ONLY
* Recovery Time will depend on Fragmentation Level of the XSR Blocks
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* DOES NOT SUPPORT FULLY ERASED PHONES
* SUCCESS RATE = 95% if the CORRECT SIMLOCKS ARE STILL INSIDE THE FLASH DUMP
Recovery Level 3
* Needs SL3 Credits and only available for ATF Network Activated Users
* Phone NEEDS to be Authorized via The ATF Network
* Recovery is performed by our Servers (NOT STAND ALONE)
* Supports ALL SL3 XSR3 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 XSR2 NAND Blocks for RAPUv1, RAPUv2, RAPIDO, RAPG3v4 and BCM
* Supports ALL SL3 NOR Blocks for RAP3Gv3
* Supports USB or FBUS Connection (FBUS ONLY FOR RAP3Gv3)
* Recovery Time will depend on CURRENT TASK LOAD on the ATF Simlock Recovery Server
* SIMLOCKS WILL BE VERIFIED (Since Phone is already Authorized)
* The output file is a REGULAR PM FILE with PM 120 Sections 0, 1, 2 and 3
* POSSIBLE TO SUPPORT OVERWRITTEN PM 120 Blocks with Wrong PM 120 Blocks
* POSSIBLE TO SUPPORT FULLY ERASED PHONES
* DOES NOT SUPPORT WRONG FLASHED PHONES with WRONG FIRMWARE (Repartitioned NANDs)
* SUCCESS RATE = 95% if the Phone is not wrongly Repartitioned by a wrong Firmware
IMPORTANT INFORMATION:
Summary:
If your phone is DEAD, but the SIMLOCKS are 100% OK, then the ATF Simlock
Recovery Module will recover your simlocks for you via Recovery Level 1 or 2.
If your phone is DEAD, and the SIMLOCKS are possibly corrupted, then the
ATF Simlock Recovery Module will recover your simlocks for you via Recovery
Level 3 + ATF SL3 Credits.
Other Updates:
* MEEGO PHONE Authorization EVEN IF 20-digit SL3 Code is detected.
* Shows full RPL (Certificates) Information during Backup RPL on BB5 Phones.
--> Checks Original IMEI
--> Checks Original Product Code
--> Checks PA_PUBLIC_ID
--> Checks PA_PUBLIC_KEYS_HASH
--> Checks Original BT ID
--> Checks Original WLAN ID
* New option in Settings "Select USB Connection by Default when ATF Software
Starts"
* Cross Flashing is now IMPOSSIBLE if Phone has good IMEI (NO MORE WRONG
FIRMWARES)
* Flash File CRC32 is now CHECKED BY DEFAULT on Flash Files downloaded from
NaviFirm etc...
* Other small tweaks which I already forgot to mention...
*******************************
Advance Turbo Flasher v8.90
*******************************
Release Date: June 25, 2012
Features:
Ultra-Fast Communication Speed (upto 25 Mhz for Hi-Speed Capable Cards).
Fastest Brute-Force Speed with Intelligent Card Speed Threshold Adjustment.
First and ONLY Device in the GSM Industry that can retrieve SD Card Passwords
without FORMAT.
Compatibility:
Compatible with ATF Lightning, ATF Nitro and ATF Chrome Boxes with LogiCore
10.3.12 or Higher.
Compatible with ALL Micro SD Card Brands that conform or don't conform to the SD
Standards.
Compatible with ALL Micro SD Card Capacities (Tested upto 128 GigaBytes).
Flashing Updates:
--> Added Support for Newer Mass Memory Content Files
--> Only Scans Existing VALID Directories for Flash Files
--> Skips MEEGO/MAEMO Flash File Intensive Pre-Parsing
Other Updates
--> Custom PM Erase Section and Sub Field (For Expert Use Only)
--> Support for ATF Nitro SD Card Reader for SD Card BF and Factory Formatting
--> Added New Phones inside Nokia.ini
Bug Fixes:
--> Fixed AUTO-ADL Flashing Selection on LIVE RAPIDO Phones
--> Fixed Incorrect SP Lock/Open Status on One Specific Service Provider
--> Fixed USB "ULTRA SLOW" Mass Memory Flashing for Built-In EMMC Chip
--> Fixed Some Wrong Entries inside Nokia.ini
*******************************
Advance Turbo Flasher v8.80
*******************************
Flashing Updates:
--> Lumia Flashing Optimization for 610, 710, 800 and 900 Flash Files
--> BB5 USB Flashing Default Timeout Corrections on RAPUYAMA Booting
--> BB5 DUAL CPU New Protocol Flashing (N95, N95-8GB, N90 Etc) Speedup
Driver Updates:
--> New ATF Box FTDI Drivers 2.08.24
--> Nokia Connectivity Driver v7.1.78.0
--> Lumia New WinUSB Drivers (32-Bit and 64-Bit)
Bug Fixes:
--> DCT4 ASIC 2-5-6-7 Direct Unlocking Fixed for Custom Profile Bits
*******************************
Advance Turbo Flasher v8.70
*******************************
Flashing Updates:
--> Lumia 900 RM-808 and RM-823 Now Fully Supported and Tested
--> Blocked Cross Flashing a X3-02.5 (RM-775) with a X3-02 (RM-639) Flash File
--> Blocked Cross Flashing a C3-01.5 (RM-776) with a C3-01 (RM-640) Flash File
--> Dual CPU (CMT + APE) New Protocol FBUS Flashing Re-Activated (N95, E90)
--> Dual CPU (CMT + APE) Phone Authorize via The ATF Network Re-Activated
--> Dual CPU (CMT + APE) ADL USB Flashing Re-Activated (N95-8GB, N95, N73, E90)
--> Dual CPU (CMT + APE) First In The World ADL USB Recovery Flashing (N95-8GB,
N95, E90)
Other Updates:
--> Improved Drive Detection for ALL SYMBIAN APE Phones...
--> FORMAT FILE SYSTEM Now Supports S40 FILE2 Drives (5130c, X2-01, etc..)
--> REMOVE SD Card Password via S40 Phone FILE2 Format of Drive E:
DCT4 Update:
--> DCT4 ASIC 2-5-6-7 SP Data Rebuild for DIRECT UNLOCK and REPAIR
Other Updates:
--> New Products Added to Nokia.ini
Some Clarifications:
1. Old Phones Can now be flashed with New Loaders and New Protocol (like 5130 and
N95-8GB).
But it is still BETTER to use OLD PROTOCOL and OLD LOADERS for these Phones.
2. You can now flash N95-8GB, N73, E90 etc via USB Cable Only.
3. Nitro and Lightning users can now EASILY REMOVE Password from any SD Card
without buying
or making an SD Card Cable Adapter. Simply put SD Card inside a S40 Phone like
5130c or
X2-01 etc... When card is now inside the phone, use FILE SYSTEM FORMAT Option to
Format
Drive E:... That is it!
*******************************
Advance Turbo Flasher v8.60
*******************************
Other Updates:
--> Updated New Phone Models inside Nokia.ini
Notes:
* ATF Network Activation is Required for Authorizing RAPIDO Phones via USB
Connection
** Single CPU means that the BB5 Phone does not have a separate APE CPU.
Examples of Dual CPU Phones: N95-8GB, 6630, N90, E90
Rap3Gv3 Phones are not supported for USB Buscheck as well (5130c, 3110c,
7210c, 6300c)
*** SD Card BF Speed Depends on the Actual SD Card. Speeds may vary
from 45 passwords per second to 25,000 passwords per second.
*******************************
Advance Turbo Flasher v8.50
*******************************
Bug Fixes:
1. Fixed GUI Hang when FBUS Simlock Backup Fails at the Start of Flashing.
2. Fixed FBUS Booting when receiving receiving incomplete BB5 Boot Code.
Other Updates:
Drivers for Lumia (Nokia Mode) and Lumia (Zune Mode) can be found here:
*******************************
Advance Turbo Flasher v8.00
*******************************
Release Date: November 25, 2011
Bug Fixes:
*******************************
Advance Turbo Flasher v7.90
*******************************
Now The ATF Network Supports ALL BB5 CPUs Released By Nokia!!!
Here is a List of Broadcom Based BB5 Phones:
C3-00 RM-614
X2-00 RM-618
X2-01 RM-709
X2-03 RM-709
X2-01.1 RM-717
2710c RM-586
7020 EM-497
**************************************************************************
*** IMPORTANT NOTES ABOUT BROADCOM AUTHORIZE PHONE VIA THE ATF NETWORK ***
**************************************************************************
1. Since NO other team can even Dream of releasing Broadcom Loaders before ATF
Team,
all Broadcom Phones Authorized by The ATF Network will require 5 ATF Network
Credits.
*** Note that it requires 5 ATF Network Credits and NOT 5 SL3 BF Credits...
3. You DO NOT NEED ATF Network Activation if you just want to:
a. Read FULL NAND Flash Chip and extract files etc...
4. If you Authorize a Broadcom Phone more than 1 time, then you will be charged and
charged again and again and again with 5 credits each time.
5. Some Broadcom Phones will get stuck when Reading Phone info in Normal Mode.
The correct way to do it is to change phone mode to TEST MODE before attempting
to Decrypt PM 120 HASHES, Super Dongle Repairs etc...
Here is a QUICK way on How to Correct Set a Broadcom Phone into TEST MODE from
Normal Mode (RF Inactive) Condition.
*** Once the phone is detected, you can select "Test" on that DropDown
list on the LEFT SIDE of "Backup RPL" Button. This will make your
Phone enter into TEST MODE....
**************************************************************************
**************************************************************************
**************************************************************************
N900 FIASCO Flashing has been moved from iTablets into the BB5 Section.
--> Now you can Flash N900 just like any other BB5 Phone... Super EASY!
--> The Current MAEMO Flash ENGINE does not support EMMC (VANILLA) Flashing Yet,
this will be Ported on the Next Update.
Whats Up?
Try using the XFactor.skn skin... it Rocks!
*******************************
Advance Turbo Flasher v7.80
*******************************
* Authorize Phone for RAPUYAMA v2.1 Phones via USB or FBUS (Nokia 500, 600, 603,
700, 701 etc...)
---> SD Repair
---> Stand Alone SX4
---> Read PM 120 Hashes
* Read Flash Enabled for RAPUYAMA v2 Phones via USB or FBUS (Nokia 500, 600, 603,
700, 701 etc...)
* Read Flash Enabled for RAP3Gv30 Phones via FBUS Cable (5130c, 3110c, 7210c,
6300c etc...)
* Read Flash 8MB Limitation on RAP3Gv40 Phones Removed... Now you can Dump Full
Flash Chip in 1 Session
* Extract Phonebook Contacts from Symbian Belle Flash Dumps made by the Read
Flash Function
* Write Full Nokia Original RPL for all BB5 Phones (SL1, SL2, SL3, PA_SIMLOC30
15-digit and PA_SIMLOCK30 20-digit)
---> Write Simlock Data
---> Write Super Dongle Key
---> Write CMLA Key
---> Write WMDRM Key
---> Write PARTNERC (If Available)
---> Write MDM_KEYS (If Available)
* N900, N950 and N9-00 Full PM Backup Fixed
* Read / Write Product Profile Added
* Added more Phone Modes for changing (Alarm, Charging, Discharging etc...)
* Added Ability to read Multiple MMC Passwords in 1 Phone (upto 16 MMC Passwords)
SL3 BF Server Changes:
* Reduced SL3 BF Price from 30 Credits to 25 Credits
General Updates:
* Added New Products to Nokia.ini
* Added Updated Provider Listing for MNC_MCC Codes
* New Skins Added with Better Compatibility
* Fixed FTDI Device Close problem on New FTDI Libraries
* Mass Memory Flashing Automatically Switches to Turbo Mode when needed.
* Reads more Information from the Phone during Scan Phone (All Information
Available)
* Fixed Problem for ATF Boxes which ask you to install Drivers each time you
Start ATF Software
Driver Updates:
* ATF Box Driver v2.08.17(Beta)
* Nokia Connectivity Driver v7.1.45.0
* libusb Driver v1.2.5.0
Update Summary:
1. Uses Latest Nokia Loaders 11.34.000.2
2. Can Authorize ALL BB5 Phones
3. Can Read Flash Chip from ALL BB5 Phones except RAP3Gv2 (6630, N90, N70... very
old Phones)
4. Can Extract Contacts from Symbian Belle Flash DUMPS
5. Can Full Write Nokia ORIGINAL RPL
*******************************
Advance Turbo Flasher v7.70
*******************************
Common Updates:
* New BB5 Flash Loaders Version 11.24.000.3
* New Nokia Connectivity Driver 7.1.42.0
Bug Fixes:
* E6-00 and X5-01 Nitro Flashing Speed FIXED
* Rapido ADL Flashing Bug for E71, E63 etc.. FIXED
* USB ADL Flashing Format Partitions FIXED
* BB5 Booting Speed FIXED
* MMC Password Reading now Supports Unicode Characters
Q: Do I need to pay ATF Network Activation in order to use the READ FLASH Functions
of ATF 7.70 ?
A: NO, this new Feature is FREE.
Q: How Long Does it take to Read FULL Flash an N8-00 with a 1 Gigabyte Flash Chip ?
A: Via USB, it will take about 12 minutes... Via FBUS, it will take MANY + MANY
HOURS...
Q: Will you support ALL Symbian S60 Contacts Recovery in the Next Updates ?
A: Yes, we will support them when we have more time.
Q: I have a DEAD 5800 Phone and I have Flashed it a FEW TIMES already but it is
still dead... Can I still
DUMP the Pictures and Videos from it?
A: Flashing will most likely REFORMAT the Phone... So your chances of Retrieval are
Lower. Then Best thing
to do is to DUMP the Flash first before trying to FIX it via Flashing. If the
FILES inside the Phone are
very important, then you should always AVOID Flashing before you try to RECOVER
the IMPORTANT FILES.
Q: Why is FBUS Flash READING VERY Slow and USB Flash READING VERY FAST ?
A: Because of HARDWARE Limitations on the FBUS Channel, the READ Speed is severely
Compromised.
Q: Can I READ Flash a Phone with a Special Language PACK inside and use the Flash
DUMP to put the
Special Language PACK to my other Phones ?
A: This is possible, but it still REQUIRES you to have Knowledge on how to convert
BINARY DUMPS
into FPSX Formatted BB5 Files.
*******************************
Advance Turbo Flasher v7.65
*******************************
++ RPL Write Problem for OLD Protocol and RAPIDOYAWE Phones Fixed
++ PM Writing when PM files contains blank empty lines fixed
++ USB Booting on Rapuyama phones adjusted
++ RAPIDOYAWE Simlock RPL and SD RPL Data fixed
Known Issues:
* Mass Memory Files should be FLASHED separately and should NOT BE Flashed
together with MCU, PPM or CNT files...
*******************************
Advance Turbo Flasher v7.60
*******************************
Flashing Updates:
+++ BB5 Mass Memory Flashing Enabled for FBUS New Protocol (Fastest In The World)
+++ BB5 Mass Memory Flashing Enabled for FBUS Old Protocol (Fastest In The World)
+++ BB5 Mass Memory Flashing Enabled for USB New Protocol (Fastest In The World)
+++ BB5 Mass Memory Flashing Enabled for USB New Protocol (Rapido) (Fastest In The
World)
+++ Full Certificates Backup for New Phones with 'PARTNERC' Certificates (E6-00)
(First In The World)
+++ Full Certificates Write for New Phones with 'PARTNERC' Certificates (E6-00)
(First In The World)
+++ USB NON-ADL Flashing for Rapido Phones (Can Flash Totally Dead Phones)
General Updates:
++ New Nokia FBUS and USB Flash Loaders (11.16.000.2)
++ New Nokia Infineon Static 'Buscheck' Loaders
++ New Nokia Connectivity Cable Driver (7.1.40.0)
++ New ATF Drivers Introduced (2.18.14)
Known Issues:
* Rapido Mass Memory Flashing via USB should use "Skip ADL Chk" Option
* Some New RAPUYAMA Phones Cannot Be Flashed with "Nitro" Mode... Use "Turbo" for
E6-00 and X5-01...
* If you Get an Error Message Pop-up When you Close the Software, there are 2
slutions:
--> Use iMetal Skin
--> Delete this File C:\AdvanceBox Turbo\Flasher\ImageIcon\atf_store.html
Update Summary:
1. Mass Memory Flashing for ALL BB5 Phones via FBUS or USB is 100% Supported (First
and Only In The World)
2. FBUS Mass Memory Flashing is Faster than FPS-21 and Phoenix USB !!! (Fastest In
The World)
3. All Currently Released Infineon Nokia Phones are 100% Supported and Fully Tested
(First and Only In The World)
4. Now You can flash Dead Rapido Phones (with fully erased PAPUBKEYS) via USB
*******************************
Advance Turbo Flasher v7.50
*******************************
Good News to ALL ATF Users who ACTIVATED Their Boxes for The ATF Network!!!
No more Headaches... Just use the USB Cable that came with the Phone!
ATF First In The World Unique Features for USB Only Connection:
*******************************
Advance Turbo Flasher v7.49
*******************************
Update and Activate to ATF v7.49 Now and Enjoy the following supported TASKS:
* Unlimited SL3 PM 120 HASH Decryption for ALL NEW HASH BB5 Phones with FBUS
Connection
* Unlimited SL2 Direct Unlock for 6120c, 6760s and 6790s NEW HASH 479Cxxxx Phones
* Unlimited Super Dongle Repair for ALL NEW HASH BB5 Phones with FBUS Connection
* Unlimited SX-4 Authorization (CUstomized Keys) for ALL BB5 Phones with FBUS
Connection
* Unlimited SL3 Downgrade for phones with ENO files available
Activate Now and get a chance to Participate and WIN FREE RAPIDO NEW HASH
Unlocking!!!
Additional Information:
* For End users who paid 99 Credits for ATF Network Activation since March 2011,
you will all get a 50 Credits Rebate which will be delivered back into your
account within 24 hours.
*******************************
Advance Turbo Flasher v7.40
*******************************
DCT4 Updates:
Stand Alone RPL Calculation via "REPAIR IMEI" button for ALL DCT4 Phones ASICs
(2, 5, 6, 7 and 11)
Master Code Calculator Version 2.0 can now Correctly Calculate the 10-digit
Master Code for ALL DCT4 PHONES
BB5 Updates:
Stand Alone BB5 SL3 15-digit NCK Calculator for ighashgpu Brute Force Result
PA_SIMLOC30 NCK Code Sending now supported for New 20-digit Code
RAPUYAMA and RAP3Gv40 Booting Fixed
Common Changes:
Fixed Full Factory Settings Command
Fixed Product Search and Phone Search Menu
Self-Test Actual Status is now Displayed
Notes:
*** It is advised that you should use iMetal_Dark.skn
*******************************
AdvanceBox Turbo Flasher v7.20
*******************************
Freeloaders are 100% Stand Alone loaders that allow you to perform
Super Dongle Repairs, SX-4 Authorization and PA_SL3 or PA_SIMLOC30
PM 120 HASH Decryption. These Loaders DO NOT need an ATF Network
Account or Credits. It is completely Stand Alone just like the other
OLD Hashes.
E52-1 (RM-469)
E72-1 (RM-530)
E72-2 (RM-529)
E73 (RM-658)
6700c-1, 6700c (RM-470)
6700s (RM-576)
6710s navigator (RM-491)
6720c (RM-424)
6730c-1 (RM-547)
X3-00 (RM-540)
6303ci (RM-638)
7230 (RM-604)
3710a-1 (RM-509)
======================================================================
The Phones listed above do NOT require Credits or Internet Connection.
======================================================================
For NEW RAPUYAMA and NEW RAPIDO Phones, you STILL need to have an ACTIVATED
ATF NETWORK Account and 5 Credits for each New Phone you want to Authorize.
*** PA_SIMLOC30 HASHES are now Supported for PM 120 HASH Extraction ***
*******************************
AdvanceBox Turbo Flasher v7.10
*******************************
*** SL3 Local Brute Force for ALL BB5 HASHES vis FBUS Cable
*** SL1/SL2 Stand Alone Unlock and Rebuild Simlocks via Simlock RPL
You need to have an ACTIVATED account in The ATF Network if your phone is NEW
HASH.
Authorization Cost for EACH NEW HASH Phone is still just 5 Credits
After phone is AUTHORIZED, you can do the following tasks in Stand Alone Mode:
1. Super Dongle Repair
2. SX-4 Stand Alone Authorization
3. Decrypt SL3 PM 120 HASHES
479C6DDE3942E12C429C1D6ADED803710E52EBD3
C70CB07324056BC66A824347F40DB2D5E198D1B2
916F75217F32081248B15C38DFC8E81B1803F26F
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
928E5FFB88D81E5F74729A212AB9D12EC755ED14
2C05369F57CC3C4CF9E783E83D9B512B53E28D99
3AB5DB70B45D23F1ADEEBB5734160706668138E1
2B910DA4E0FBEFFFE5C65D3682854636C02881F7
68597B9162BAB81AF74C56E78EA2588F2D968376
EA81B32860B86EF4231A11831045F3E6AE071379
8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
46802B476C93A05CBAF76A64752086A9A7320E5C
1B0D74C532CA1C6133940C740E8C786E49B99671
700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
87FAC992288DA497A663E5DDC0410B11521B8D0C
55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
49A97E826B93BA20B7ED0B082475C0056EBB8F8D
FEA0F9E21EF50B836924A9F25D85C643D8514505
Supported BB5 OLD HASHES via FBUS (100% FREE and DOES NOT NEED ATF NETWORK ACCOUNT)
38F312750F686F9FC9B1B3778774A195
9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
A5404AE83A594ECADEE532F0C236BFA6
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
E9EFF4BFAA5393217CA6B17755FC3E14
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0
*******************************
AdvanceBox Turbo Flasher v7.00
*******************************
ATF Team Launches the New ATF Network with Cutting Edge Services
that will help you become a step ahead of your competition.
This Unique service allows you to Fix Super Dongle problems on ALL
BB5 Phones and it will even allow you FULLY DOWNGRADE any BB5 Phone
to any compatible Firmware Version you want.
All you need is to activate your ATF Network account and start using
ATF Credits so you can finally Repair all the NEW Phones in the Market!!!
A: All BB5 Phones are supported, but currently it only supports FBUS Connection.
USB Connection "may" be supported in the future, but we still do not have
a definite date for this to happen.
A: No, it is not free. You need to purchase ATF Credits from your nearest
ATF Reseller. You will first need to Create an ATF Network Account, then
you can start using our Phone Authorization service for merely 5 Credits
Per Phone. (5 credits is about 5 U$D).
A: No, you ONLY NEED to Authorize the New BB5 Phones which have New HASHES
that are NOT Supported by any other Team in the world. If your phone is
using OLD HASH, then you can still work with it without paying for
Authorization.
A: If you promise to Repair all your Customer's Phones for FREE, then we
will give you a free Activation for the ATF Network and some FREE Credits
so you can Authorize Phones for free. But do not forget, you also need
to repair ALL PHONES in your shop for FREE! Do you agree? Email us
if you agree to repair phones for Free.
A: You only need to Authorize the phone 1 time. Once it is authorized, you
no longer need to perform authorization again.
Q: Can you repair Simlocks and IMEI from 100% erased SL3 and SIMLOC30 phones?
A: No. We cannot repair or regbuild Simlocks for SL3 and SIMLOC30 phones. You
can only repair these phones if you have a PM 120 Backup and an RPL Backup.
A: YES, YES, YES... The ATF Network Supports ALL BB5 Phones in the Market.
You just need to use FBUS Connection if you want to Authorize Phones.
479C6DDE3942E12C429C1D6ADED803710E52EBD3
C70CB07324056BC66A824347F40DB2D5E198D1B2
916F75217F32081248B15C38DFC8E81B1803F26F
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
928E5FFB88D81E5F74729A212AB9D12EC755ED14
2C05369F57CC3C4CF9E783E83D9B512B53E28D99
3AB5DB70B45D23F1ADEEBB5734160706668138E1
2B910DA4E0FBEFFFE5C65D3682854636C02881F7
68597B9162BAB81AF74C56E78EA2588F2D968376
EA81B32860B86EF4231A11831045F3E6AE071379
8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
46802B476C93A05CBAF76A64752086A9A7320E5C
1B0D74C532CA1C6133940C740E8C786E49B99671
700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
87FAC992288DA497A663E5DDC0410B11521B8D0C
55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
49A97E826B93BA20B7ED0B082475C0056EBB8F8D
FEA0F9E21EF50B836924A9F25D85C643D8514505
OLD HASHES are also supported, but you DO NOT NEED The ATF Network for OLD
HASHES!!!
A: You need 99 Credits (almost 99 U$D) to Activate your ATF Network Account.
Then you will only need to spend 5 Credits (5 U$D) for EACH Phone you
want to Authorize.
Q: Do I need Internet Connection to connect to the ATF Network?
A: Of course dear :O) But the good news is, after you have successfully
Authorized your phone, you do not need the internet connection anymore
to perform SD Repairs and SX4 Authorization. It will be Stand Alone.
Q: Ok last question, do you support the E7-00 which is the NEWEST BB5 Phone in the
Market?
A: Yes, E7-00 HASH is supported by The ATF Network... However, you first need to
find an
FBUS Cable for E7-00 beause The ATF Network DOES NOT SUPPORT USB Connection as of
the
moment.
USB Connection will be supported in the future, but we cannot give you an actual
date
on when it will be released.
*******************************
AdvanceBox Turbo Flasher v6.60
*******************************
Common Changes:
* New LogiCore 9.02.10 Firmware for ATF Chrome (Big ATF) and ATF Lightning (Small
ATF)
* Updated Nokia.ini with very old and very new Phone listings
* New Nokia Connectivity Driver 7.1.36.00
* Update Important Files Button is now RE-Activcated (Updates Loaders, PM, DCC
files etc...)
* Built-In Log File Viewer can now View the Current Session
* Full Package Flash File Download Server automatically selects non BUSY servers
* Fixed USER.INI files loading Bug (This also fixes Manually Loaded flash files)
* Added Manual Selection of BOX TYPE for Restore Box Function
* Updated the SKINS for the Software Interface
BB5 Changes:
* Stand-Alone Super Dongle Keys Repair for all phones with Supported HASH
* Stand-Alone SX-4 Authorization for all phones with Supported HASH
* FBUS Loaders Updated to Release 10.50.000.1
* Original Dynamic camera Configuration Files (DCC) Compatibility
* Automatically Fixes DCC Problems using Original DCC files (not PM Files)
* Erase Flash Chip can now SCAN active Flash Chips and automatically Erases
Selected Flash Chips
* CMT and APE PAPUBKEYS are now Compared during Buscheck (just in case it was
damaged by other Boxes)
* Flash Loader Information (Version, Revision, Protocol Type) are now Displayed
during Buscheck
* Added Manual ERASE PM 1 and PM 309 file: ERASE_1_309.pm
* Added New Detection Method for 64k page Flash Chips for 5130c, 3110c etc...
* By Default, RAP3Gv30 New Loaders are not used unless ENABLED in Expert Settings
Menu
* Fixed Old Protocol + Old Loaders flashing for N95, N95-8GB and other Phones
with Secondary APE CPU
* Backup Certificates (RPL) for APE Subsystem is now Enabled
iTablet Changes:
* Now Supports EMMC Flashing for N900 RX-51 Variants
Infineon Changes:
* C1-01 and other Infineon USB Phones can now be flashed with PPM and CNT files
only. This
will save you some time if you want to skip MCU Flashing. Just make sure that
the currect
MCU Firmware version matches the PPM and CNT files you want to upload.
Actually, you can
skip CNT flashing as well if you only want to change the Language Pack.
DCT4 Changes
* Original Dynamic camera Configuration Files (DCC) Compatibility
* Automatically Fixes DCC Problems using Original DCC files (not PM Files)
* Before Updating your Box Firmware to LogiCore 9.02.10, make sure you have:
1. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Virus Scanner
Excemption/Exclusion List of Trusted Applications
2. Added "C:\AdvanceBox Turbo Flasher\AdvanceBox.exe" to your Windows Firewall
Excemption/Exclusion List of Trusted Applications
3. DO NOT disable the Microsoft Windows Firewall!!!
4. DO NOT disable your ANTI-VIRUS! Go to your anti-virus WEBSITE and get
information on how to add AdvanceBox.exe to the Excemption/Exclusion List
5. Make sure you have done Steps 1-2-3-4
* For N95-8GB, N95 RM-159 and other N95 Variants, it is BEST to use "Old Loaders"
for Flashing.
Using "New Loaders" for N95 flashing is 100% safe, but depending on your CABLE
QUALITY, you
might get stuck at "FUR_Control_AddClient_BB5() ASIC_INDEX_APE (Ready)". If you
do get stuck,
then go to Settings --> Nokia Settings --> BB5 Flash Loader Selection --> Old
Loaders
*******************************
AdvanceBox Turbo Flasher v6.50
*******************************
Release Date: January 17, 2011
Common Changes:
* Official Support for ATF Lightning Boxes
* Removed Update FTDI EEPROM Button (v6.50 Software will automatically Fix/Update
your FTDI EEPROM if Needed);
* Automatic Activation for "Extension Port" and Infineon FBUS
* Fixed BOX_SN: 00000000 Problems when displaying the Secondary Serial Number
* Added New Products to Nokia.ini
Infineon Changes:
* Infineon XGOLD213 USB Flashing Supported (C1-01, C1-01.1 ,C1-02, C1-02.1, C2-
00, C2-00.1, etc...)
* Infineon XGOLD213 Lifetimer Reset Automatic Detection Supported
* Infineon 1202/1203 (RH-111) TEST MODE Bug Fixed on ATF Lightning
BB5 Changes:
* FBUS Loaders Updated to Release 10.48.001.2
* Symbian^3 Lifetimer Reset Fixed (C7-00, N8-00, E7-00, etc...)
* 2nd Time Buscheck Bug Fixed for ATF Box NEW PCB
* RAP3Gv30 New Protocol Loader Supported for NOR Based BB5 Phones
* RAP3G RPL Erasing/Writing Fixed using New Loaders
* 5130c Read Info Crash after Flashing Fixed
* 3110c and 5130c New Intel Flash Chip Fully Supported using New Loaders
* SL1/SL2 Simlock Rebuild OFFLINE Method Fixed
*******************************
AdvanceBox Turbo Flasher v6.30
*******************************
Common Changes:
* Added New Products to Nokia.ini
*******************************
AdvanceBox Turbo Flasher v6.10
*******************************
Release Date: December 7, 2010
Common Changes:
* Application GUI is now locked to 800x600 resolution (slightly bigger than
before)
* Added New Products to Nokia.ini
* Update File Path was changed (will be enabled in Server side)
*******************************
AdvanceBox Turbo Flasher v6.00
*******************************
*******************************
AdvanceBox Turbo Flasher v5.90
*******************************
Change Logs:
* New BB5 Loader Package Version 10.34.1.3
* DCT4 RPL DATA1 is Backuped Automatically in First Instance of "Scan Phone"
* Security Code read attempt during "Scan Phone"
* Read Phone Mode on "Scan Phone"
* Read Dynamic Camera Configuration on "Scan Phone"
* Full Logs option for Booting BB5
* Fixed DCT4 Local Mode on Live DCT4 Phones when First Connected to Box
* Fixed DCT4 Long Boot
* Autodetect and Autoswitch Between BB5 and DCT4 Products according to Phone
Connected
* Software will always select the Highest Firmware available on your PC
* Manual and Auto Detect of VCCIO Levels
* Support for DCT4 "ini" Files which are older than DP Version 2.0
* Quick Fix for SL1/SL2 Downgrade Fix
* Fixed Default Directories for Manually Adding Flash Files
* File System Format for BB5 Phones
* Corrected SL3 Type Simlock Reading on Buscheck
* Shows Deep Scan Info for BB5 Phones
* Local Storage for Unique ID's Read from Supported Phones
* Manual Erase Flash for BB5 Phones (NOR or NAND + CMT or APE)
* Infineon New Loader Support
* Fixed FBUS UART Reading/Writing with Better Timing
* Improved Speed for BB5 USB Flashing on RAPUYAMA, RAP3Gv4 and BroadCom Phones
* New Phone Connectivity Drivers Included
* Dynamic Camera Configuration Reading and Writing Fixed for non standard DCC
Files
*******************************
AdvanceBox Turbo Flasher v5.70
*******************************
Bugfixes:
*******************************
AdvanceBox Turbo Flasher v5.60
*******************************
ATF USB Flashing uses the latest Flash Loaders and Flash Protocols
There is no need to select OBSOLETE "Old Protocols"/ "Old Loaders"
All New Phones are Supported
*******************************
AdvanceBox Turbo Flasher v5.55
*******************************
Note:
This Update is Optional and it is only for End Users
who always want to use the Latest Flash Loaders available
*******************************
AdvanceBox Turbo Flasher v5.50
*******************************
[DCT4 Engine]
Booting Problem Fixed for DCT4+/DCT4++ Phones
*******************************
AdvanceBox Turbo Flasher v5.40
*******************************
[Server Services]
SX4 PM AUTHORIZATION Engine was Completely Reworked
BB5 Unlock/Relock Engine was Complete Reworked
Server Based Tasks are now more "User Friendly"
////////////////////
// General Update //
////////////////////
End user can choose between downloading the FULL Pacakge Flash File
or just downloading only specific variants.
Each Activated ATF Box is entitled to access the MOST complete and UP-TO-DATE
Flash Files for BB5 with 3.0 GB Bandwidth allocation per month.
New Server Lease for Activation Servers / NCK Unlock Servers / Custom SX-4 Servers
Software Window Size was adjusted to allow compatibility on PC's with low desktop
video resolution.
Success Sound Customization is now Enabled. Make sure success sound wav file is
atleast 5 seconds in duration.
///////////////////////////
// DCT-4 Infineon Update //
///////////////////////////
Added "Live Phone" booting option for XGOLD 101/102 and XGOLD 110 phones.
Live Phone Booting is used to improve compatibility with 1616-2 and 1800 phones
that come from U.A.E.... These phones usually have "Made in India" in the back
sticker as compared to "Made by Nokia" in most 1616-2 and 1800 phones.
Live Phone option can be found beside the "SCAN PHONE" button and it is NOT
enabled by default.
///////////////////////
// ATF Driver Update //
///////////////////////
The 5.30 installer is now equipped with the latest FTDI 2.06.02 Drivers.
Never overwrite new FTDI drivers when you are trying to install other boxes like
JAF, UFS etc... Old Boxes will work 100% with the latest FTDI drivers. But if you
put old FTDI Drivers, then ATF Box will not function anymore.
Always check your driver version... Usually JAF and UFS drivers are from 2006...
Now is 2010 already, so please STOP LIVING in the past ;o) Use 2010 drivers
because
you are now living in year 2010.
*******************************
AdvanceBox Turbo Flasher v5.20
*******************************
//////////////////////////
// DCT4 Infineon Engine //
//////////////////////////
First in the World 3rd Party Box to Fully Support FULL Flashing,
DEAD PHONE Flashing and CROSS Flashing DCT4 Infineon Chipsets Supports
ALL DCT4 Infineon Phones in the Market !!! (Original Nokia Phones Only)
- 1616-2, 1280 and 1800 will work with regular 1616 FBUS cable
- 1202 and 1203 will work with regular FBUS cable or Easy Cable with RED WIRE
/////////////////////
//BB5 Turbo Engine //
/////////////////////
Multi SX4 Card Servers are now available (Original SX4 Cards)
Read and Write Camera Configuration is now Activated
Customized PM Read/Write is now Added (For reading specific sub fields)
Flash Mode Booting was adjusted to be more compatible with the 6700c
BB5 SL1 and SL2 Downgrade is now Activated
BB5 Self Test is now Activated
C1-00 RM-689
C3-00 RM-614
C5-00 RM-645
C6-00 RM-612
C6-01.1 RM-624
E5-00 RM-632
N8-00 RM-596
X2-00 RM-618
X3-01 RM-687
X3-01 RM-639
X6-00.1 RM-551
X6-00m RM-552
/////////////////
//DCT4+ Engine //
/////////////////
Stand Alone ASIC-11 RSA Forgery Unlocking and Relocking is now supported
////////////////////
// iTablet Engine //
////////////////////
Bug fixed for "Flash File Not Found" error in N900 USB Flashing
//////////////////////
// General Settings //
//////////////////////
*******************************
AdvanceBox Turbo Flasher v5.10
*******************************
v2010.0.1.21
> Life Timer Tuning - >> First in the WORLD
*can put anything you want
*Read Life timer in hours and minutes
BETA V4.0
> Used New Loader (Dated 12-7-2010)
> Added Simlock RPL Unlock
> Added Simlock RPL Relock
> Added Old Method Unlocking SL1
> Self Test - READING
> Modify Loader Scanning
> Production Data Edit - Reading
> VPP Auto Voltage Enabled - If you want to use External VPP
> Turbo Flashing Mode Enabled -> More Faster than Normal(One Boot Flashing)
> Fix Some Reported Bugs
> Personal INI Settings added
> Added Time Elapse time
> Fixed Auto-backup RPL
BETA v3.0
> More Stable BB5 FBUS Flashing (Support New PROTOCOL)
> BB5 NCK Unlocking/Super Dongle Repair (SL1 and SL2)
- RAP3Gv2
Boots_E9EFF4BFAA5393217CA6B17755FC3E14
-RAP3Gv3
Boots_38F312750F686F9FC9B1B3778774A195
Boots_9DDBFCFE6E73CED7D8C6268C8EB85723
Boots_A5404AE83A594ECADEE532F0C236BFA6
Boots_BAF3A9C3DBFA8454937DB77F2B8852B1
-RAPIDO
Boots_9A28E119033B91D14D22838C86D0D53C
Boots_CAEEBB65D3C48E6DC73B49DC5063A2EE
Boots_F2D76DFAFD66C7F195F278417DF05888
Boots_F682624FFB08F6D955DBE7D9C0485084
Boots_FCB5C510AF7F09F313D9BDE85A707CC0