Vous êtes sur la page 1sur 18
14+ SERTE S HEADLESS MODE 6-Axis Gyro Quad-copter 3D ROLL-ONE KEY RETURN Rize ITEM NO.x400-V2 INSTRUCTION MANUAL Technical parameter of the quad-copter Fuselage Length:298mm Gross Weight: about 112g Motor: Coreless motor Overall height: 76mm Battery: Li-polymer 3.7V Main Rotor Diameter: 135mm Charging Time: about 70 minutes Introduction @ Quad-rotor design insures more stable and powerful performance and make all kinds of 3D action more easier. @ Headless Mode and One Key Return are available. @ New designed structure makes assembly and maintenance easier. @ Adopting 2.4G auto connection technology, scores of quad-copters can be played at the same time. @ Equipped with the newest 6-Axis Gyro control system, this quad-copter has the characteristics of stable flight and easy operation. @ Full charged battery can support 8.5 minutes steady flight. Product/spare parts included in this packaging Description QTY (pc) | Description QTY (pc) | Description QTY (pc) Quad-copter 4 Blades 4 ‘Screw 4 Remote control 4 landing gear 2 Screwdriver 1 Manual 4 Protecting frames 4 USB charger 1 Thank you for purchasing this product. Please read this manual carefully before use and retain it for future reference. Reamer olucs ® This product is not a toy. It is not applicable for children who are under 14 years old. © Please read this instruction manual carefully before playing and operate the product according to the manual. @ The users are in full charge of proper operating the quad-copter. The manufacturer and dealers disclaim all responsibility for the damage caused by misuse. ® Keep the small accessories away from the kids to avoid accident. © Keep batteries away from fire or high temperature environment. @ When flying the quad-copter, keep it 1~2 meters away from user or others to avoid injury due to collision. @ Not to decompose or modify the product which may cause malfunction or accident. @ Fly the quad-copter within your eye vision for easy and safety control. @ Need adult supervision when this quad-copter is being played by children. © Only batteries of the same or equivalent type as recommended are to be used. @ Insert batteries with correct polarity. e@ Non rechargeable batteries are not to be charged; the transmitter need 3XAA batteries for work. © Do not mix old and new batteries. @ Rechargeable batteries are to be removed from the toy before being charged; @ Rechargeable batteries are only to be charged under adult supervision; @ Exhausted batteries are to be removed from the toy; @ The supply terminals are not to be short-circuited. The LCD Remote controller Main features of the remote controller ®@ Adopt microcomputer control remote controller system and 2.4G auto connection technology, scores of cotpers can be played at the same time without any interference. @ Control the function of upward,downward, forward,backward, leftward, rightward,turn left, turn right and 3D flips & roll of the copter. ® Throttle control stick can be freely switched according to player's habit. Sketch and function switches of the remote controller 9. Power switch 3. Left stick 2.One key return 13. Throttle changing button (Left) 5. Trimmer A 6. Trimmer B 14, Beginner/Intermediate/ Advance 15.Stick mode switch 10. Power indicator 1, Function/Camera 4. Right stick 12. Throttle changing button (Right) 8. Trimmer D 7. Trimmer C 11.Throttle limit button Remote Controller(Transmitter) No. | Function switch Function description One key roll button: When the quad-copter is flying, press this button, the quad-copter will roll forward once. Camera button: When the quad-copter is powered on and mounted with camera, this is the camera on-off button. Headless mode on-off button: Press this button for about Function/ 2 seconds, the remote control will send out 2 beep sounds Camera and letters “ stick mod” will be flashing on the LCD screen, the indicator light of the quad-copter turns from constant “on” to “flashing”, then, the quad-copter is in the headless mode. Press this button again for about 2 seconds, the remote control will send out 2 beep sounds and “stick mod” keeps constant “on”, indicator light of the quad- copter turns from flashing to constant “on”, then, the quad- copter exit headless mode. When the quad-copter is flying in headless mode, press one key return button, the quad-copter will fly towards One key return | player. Press the one key return button again or operate the forward /backward control stick, the quad-copter will exit the one key return function. STICK MODE 2:upward/downward,turn leftiturn right; 3 Left stick STICK MODE 4:upward/downward,leftwardirightward. STICK MODE 1:forward/backward,turn left/turn right; STICK MODE 3:forward/backward,leftwardirightward. STICK MODE 1: upward/downward,leftward/rightward; STICK MODE 3: upward/downward, turn left/turn right; STICK MODE 2: forward/backward, leftward/rightward; STICK MODE 4: forward/backward, turn leftiturn right. In stick Mode 2 and 4, this button is null. 5 Trimmer A In stick Mode 1 and 3, it helps to tune the quad-copter's forward and backward flight. 4 Right stick In stick Mode 3 and 4, it helps to tune the quad-copter's sideward flight. In stick Mode 1 and 2,it helps to tune the quad-copter's left and right direction turning speed. 6 Trimmer B 2 No. Function switch Function description In stick Mode 1 and 3, this button is null. 8 Trimmer D In stick Mode 2 and 4, it helps to tune the quad-copter’s forward and backward flight. It controls the power source of the transmitter Slide i the power switch to the “ON” position, the transmitter 9 Power switch is powered on; slide the power switch to the “OFF” position, the transmitter is powered off. The indicator light keeps blinking slowly: the transmitter is not activated 10 Power The indicator light keeps flashing rapidly: the transmitter indicator is sending out connectional signal to the quad-copter. The indicator light keeps on without blinking: the transmitter is ready for controlling the flight. imi The throttle of the quad-copter can be adjusted by this a diabetes button, player can use this button to increase or decrease the quad-copter's upward/downward speed. Throttle Slide down or slide up the 2 buttons at the same time oe changing button | to select the throttle control stick. manne.) | There are 3 flight modes of the quad-copter: low speed, 14 medium speed and high speed. Advance 18 aileron/rudder_ | Also named Stick Mode changing button-Press this button changing button | to change the control stick mode. How to install the battery of remote controller Pic.2 How to remove and insert batteries. 1. Unscrew counter clockwise to open the battery compartment cover.( Pic.1 ) 2. Install 3 X AA batteries into the battery compartment according to the given polari . (Pic. 2) 3. Screw clockwise to close the battery compartment. (Pic. 3) 3 Select throttle control stick There is 1 throttle button on either side of the remote controller. 1.Slide both of the 2 buttons to "R", the right stick is the throttle control stick. 2.Slide both of the 2 buttons to" stick. 3.Both of the 2 buttons should be either on the position of "R” or otherwise, the remote controller can not be activated. “, the left stick is the throttle control Pic.4 Pic.5 Stick mode selection Forward Forward / Backward Tote Throttle onward. contol contro contro: Peon 1 1 LefuRignt Pl LewRight Leftward) turning ightward 1 URI Rightwerd control contrat 1 ‘control ‘control 1 : Pic.6 t Pic.7 STICK MODE:1 STICK MODE: 2 Forward | Forward Backward Throttle Throttle Backward contra control contol contra Loftware! Leftward LetuRight Rightward ‘amg Rgontol conta! control control Kontrol 1 Pic.8 STICK MODE :3 Pic.9 STICK MODE: 4 When the right stick controls the throttle, press the AILE/RUDD button to select the Mode( Mode 1 or Mode 3). When the left stick controls the throttle, press the AILE/RUDD button to select the Mode( Mode 2 or Mode 4). Flight mode selection There are 3 flight modes available: low speed, medium speed and high speed.Player can select the flight speed by pressing the flight mode button. 1 STK NODE 2 Ea ‘8 EK WORE 2 Ga (on SEC nore 2 = Major parts of the quad-copter Rotor blade Protectins frames, \ Yi Landing ~ gear Protection frame and landing gear installation Pic.13 Pic.14 Pic.15 1.There are 3 interfaces on each motor cabinet. Insert the frame plugs into the interfaces and fix it. (Pic.13) 2.Fix the protection frame by screwing clockwise. (Pic.14) 3.There are 4 interfaces at the bottom of the quad-copter, insert the landing gear plugs into the interfaces and fix it. The landing gear is trapezoid, make sure that the longer waist of the trapezoid is point to the direction of the quad-copter’s nose. (Pic.15) How to change new battery for the quad-copter PS Ke yo| Pic.16 Pic.17 Pic.18 Pic.19 1.Open the battery door by screwing counter-clockwise.(Pic.16) 2.Unplug the battery wire from the power wire plug of the quad-copter and take out the battery.(Pic.17) 3.Plug the new battery wire into the power wire plug of the quad-copter and insert the battery into the battery compartment.(Pic.18) 4.Close the battery door and fasten it by screwing clockwise.(Pic.19) 5 How to charge the quad-copter Turn off the quad-copter, open the battery door by screwdriver,unplug the battery cable from the power wire plug and take out the battery. Insert the USB charger into the USB interface of the computer or A other USB outlet; connect the battery cable with the . USB wire plug, and charging is proceeding with \ indicator light “off". Once the battery is full charged, _— the indicator light of the USB will turn red_Full charging takes about 70 minutes. NOTE:Battery should be full charged before storing. Preparation for flight @ Make sure that the battery (at the bottom of the quad-copter)is well installed and connected with power wire of quad-copter. The quad-copter is OFF. @ Turn on the quad-copter;the flash light will keep flashing quickly, the gyro of quad-copter will be in signal detecting condition. Set the quad-copter to flat surface, about 4 seconds later, the flash light will keep constant “ON”. It means that signal connection is finished and the quad-copter is ready for flight. @ To ensure steady flight, please set the value of the Trimmer to the midpoint. @ Push up the throttle stick slowly and the quad-copter takes off. @ To avoid any misunderstanding, we have defined the orientation of the quad-copter as follows:The quad-copter is set to be copter nose right ahead and tail facing the player .The copter nose direction is named as “forward”, the tail direction is named as “backward”. The copter flies up to the sky is name as “upward”; the copter flies down to the ground is named as “downward”. Player's left side is named as “left”, player’s right side is names as “right”. All the directions we are talking about in this manual are subject to the definition above. Pic.20 — Head of the Clockwise quad-copter Counterclockwise (Motor 2) 4) (Motor 3) Right 4 Counterclockwise o Clockwise (Motor 1) Tall of the (Motor 4) quad-copter Pic.21 6 @ The blue lights are at the front of the quad-copter; the orange lights are at the back of the quad-copter. @ When the quad-copter is on, checking the rotation direction of the rotor blades;the front-left and right-back rotor blades should be rotating in clockwise direction; the right-front and left-back rotor blades should be rotating in counter-clockwise direction. @ If the quad-copter keeps flying to one side, it can be corrected by adjusting the trimmer on the remote control. Remarks: @ Signal connection between the quad-copter and the remote control is required for the first use. @ Set the connection one by one to avoid signal connection error. @ To better protect the battery, please unplug the battery cable from the power wire after the use. BU tim ence) 1.If the quad-copter keeps moving forward/backward even there is no control signal given, users may adjust the elevator trim to keep the quad-copter balanced. STICK MODE 1 or 3: If the quad-copter keeps moving forward, push down Trimmer A until it gains balance. oe If the quad-copter keeps moving backward, push up Trimmer A until it gains balance. STICK MODE 2 or 4: t If the quad-copter keeps moving . backward, push up Trimmer D 7 until it gains balance. If the quad-copter keeps moving forward, push down Trimmer D until it gains balance. 2. If the quad-copter keeps moving leftward/rightward even there is no control signal given, users may adjust the aileron trim to keep the quad-copter balanced. STICK MODE 3 or 4: If the quad-copter keeps moving leftward, turn right of Trimmer B until it gains balance. If the quad-copter keeps moving rightward, turn left of Trimmer B until it gains balance. If the quad-copter keeps moving leftward, turn right of Trimmer C until it gains balance. If the quad-copter keeps moving rightward, turn left of Trimmer C until it gains balance. 3. If the quad-copter keeps spinning even there is no control signal given, users may adjust the rudder trim to keep the quad-copter balanced. STICK MODE 1 or 2: & If the quad-copter keeps spinning S counterclockwise in the air, turn K right of Trimmer B until it gains balance. If the quad-copter keeps spinning A clockwise in the air, turn left of Trimmer B until it gains balance. STICK MODE 3 or 4: If the quad-copter keeps spinning counterclockwise in the air,turn right of Trimmer C until it gains balance. If the quad-copter keeps spinning clockwise in the air,turn left of Trimmer C until it gains balance. Upward Push up the throttle control stick, the rotation speed of the mains rotors are increasing and the quad-copter ascends accordingly. Downward Push down the throttle control stick, the rotation speed of the mains rotors| are decreasing and the quad-copter descends accordingly. Turn left Turn the left/right turning control stick to the left,the quad-copter will turn left. Turn right Turn the left/right turning control stick to the right,the quad-copter will turn right. Forward When the quad-copter is flying, push up the forward/backward control stick, the quad-copter will move forward. Backward When the quad-copter is flying, push down the forward/backward control stick, the quad-copter will move backward. 9 Turn the sideward flight control stick Leftward <_ to the left side,the quad-copter will flight SS fly leftward. Turn the sideward flight control stick to the right side,the quad-copter will Ri ward « 2 | fly rightward. 3D Roll There are 3 channels of the remote control: low speed channel, medium speed channel and high speed channel. At any channel, press the roll button on top of the remote control, the quad-copter will roll forward or roll backward accordingly. When the remote control is at high speed channel, roll action can be done through controlling the forward/backward control stick and the leftward/rightward flight control stick. Manual Roll(at high speed channel): When both of the left and right control stick travels are more than 95%, roll action will be performed once; when both of the left and right control stick travels are less than 95%, the quad-copter will perform the flight according to the received control signal. One key Roll (at any channel): To easily enjoy the fun of rolling, player can press the one key roll button to perform roll action. Before rolling, make sure that the quad-copter is flying 3 meters above the ground; then, press the one key roll button, the quad-copter will roll forward or backward according to the given signal. € are SAS ES TIPS: 1.Beginners are recommended to play the quad-copter at low speed or medium speed channel. 2.It is better to play the quad-copter at open and wide space. 10 eee ces Enter into headless mode: Once signal of the quad-copter and the remote control is successfully connected, press the function button located at top right of the remote control for 2 seconds, the remote control will send out two beep sounds and there will be letters of “stick mod” flashing on the LCD screen, the quad-copter’s indicator light turns from constant ‘ON” to “flashing”. That means the quad-copter is in headless mode. Exit headless mode: When the quad-copter is in headless mode, press the function button at top right of the remote control of 2 seconds, the remote control will send out 2 beep sounds and the letter “Stick mod” is keeping constant “on”; the quad- copter’s indicator light turns from flashing to constant “on”. That means the quad-copter has exited the headless mode. Check up on the direction of the quad-copter in headless mode: When the quad-copter is in headless mode, flight direction proof is needed. Set the head of the quad-copter ahead of the player, turn both of two control sticks to the lower right corner for about 2 seconds, the quad-copter’s indicator light will turn from slowly flashing to quick flashing and flight direction proof is finished. SS Pic.24 Flight direction control in headless mode: * When checking up on the flight direction of the quad-copter, set the quad- copter nose right ahead and tail facing the player’s, at this time, the quad- copter’s nose is pointing forward; this direction will be constantly considered as “forward” when forward signal is en from the remote control, no matter where the quad-copter nose is pointing to. That is to say, the player’s straight front side is defined as “forward”; the player’s back side is defined as “backward”, the player’s left side is defined as left; the player’s right side is defined as right. 11 * When the quad-copter is flying in headless mode, player should keep facing the forward direction. Otherwise, the quad-copter will be out of control. The quad-copter control is showed as below: Push up the forward/ backward control stick, the quad-copter will fly forward, away from player. Push down the forward/| backward control stick, the quad-copter will fly backward, towards player. Turn left the sideward flight control stick; the quad-copter will fly to the left side of player. Turn right the sideward flight control stick, the quad-copter will fly to the right side of the player. Turn right the turning control stick; the quad- copter will turn to the left side of the player. Turn left the turning control stick; the quad- copter will turn to the tight side of the player. One key return: When the quad-copter is flying in headless mode, press one key return button, the quad-copter will fly towards player. Press the one key return button again or operate the forward /backward control stick, the quad-copter will exit the one key return function. Remarks: *Flight direction proof is needed when the quad-copter is going to fly in headless mode. When checking up on the flight direction, the quad-copter should be set right ahead and tail facing the player; the player should face the direction where the quad-copter nose is pointing to. Player should stand in the same direction when playing the quad-copter. «When the quad-copter is flying in headless mode, if the flight direction is inconsistent with the player’s operating direction or there’s direction deviation, please stop playing and carry out the flight direction proof action again. of the motors and the PCB It is important that the installation of the PCB and the wire connection of the motor to the PCB should be connected properly according to the diagram shown as below. Receiver board =| Motor 4 [== Hs > = [Motor 2 |=) =>] [moter 3 || ==) (Motor 4 |: (or C4005 Interface C4006 1.Motor 1 should be connected with interface 1. 2.Motor 2 should be connected with interface 2. 3.Motor 3 should be connected with interface 3. 4.Motor 4 should be connected with interface 4. C4002 Interface How to change the foot stand Pic.26 Pic.27 Pic.28 1.Take out the screws 2.Pull out the foot 3.Unplug the motor with a screwdriver by stand.(Pic.27) wire from the turning counter power wire plug. clockwise.(Pic.26) (Pic.28) Pic.29 Pic.30 Pic.31 4.Connect the motor 5.Install the foot 6.Lock the foot stand wire of the new foot stand to the main with screws.(Pic.31) stand to the power body of the quad- wire plug.(Pic.29) copter.(Pic.30) FPV camera #C4005/#C4006 installation ( not included in the package) Installed with #C4005/#C4006 camera, the quad-copter can take photos and videos, if download and install the FPV software to the smart phone, FPV real-time transmission can be achieved through the connection of the quad- copter and the smart phone. Install the holder of the mobile phone: ja : S «zs Be 5 Pic.32 Pic.33 Pic.34 4.Connect the stand 2.Adjust the fixing 3.Set the mobile bar to the mobile component upward phone holder to phone fixing or downward the top of the component.(Pic.32) according to the remote control. size of the mobile (Pic.34) phone.(Pic.33) Remark: 1.Pull back the lock center of the stand bar and slowly push up the holder, the mobilephone holder would be taken down.(Pic.35) Pic.36 #C4005 installation: . fl - Pic.36 Pic.37 Pic.38 1.The camera should 2.Fix the camera by 3.Insert the camera be fastened to the screwing clockwise. wire plug to the interface at the bottom (Pic.37) camera interface. (Pic.38) of the quad-copter. (Pic.36) 14) Pic.39 4.Insert the camera wire plug to port et Pic.40 5.Insert the antenna bracket into interface Pic.41 6.Install the antenna to the antenna of C4005.(Pic.39) of the foot stand and bracket.(Pic.41) rp FI lock th .(Pic.40) #C4006 installation: ek she serewe-(Fieat) = , < , “dh = = Si = ae i Z a

Vous aimerez peut-être aussi