Académique Documents
Professionnel Documents
Culture Documents
net Contents 1
Moeller SK1230-1177GB
Circuit-breakers LZM1, 2, 3, 4
Circuit-breakers, switch-disconnectors
and switch-disconnectors LN1, 2, 3, 4 Circuit-breakers, switch-disconnectors
from 15 to 1600 A
up to 1600 A
up to 1600 A
Page Page Page
Remote operators
- common functional concept of all
variants
- low closing delays 60 ms to 100 ms
- locking and sealing features provide
security
Page 64
2 System overview
Circuit-breakers, switch-disconnectors
LZM Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
5
7
4 6
8
25 9
10
3
2
24
11
13 12
14
23
19
20 16
15
21
17
18
System overview 3
Circuit-breakers, switch-disconnectors
http://catalog.moeller.net Moeller SK1230-1177GB LZM
Circuit-breakers, switch-disconnectors
Basic units Add-on functions Mounting accessories
Circuit-breakers, switch-disconnectors
Circuit-breaker
With main switch characteristics to IEC/EN 60204
and isolating characteristics to IEC/EN 60947
Notes The stated switching capacity values are rated ultimate short-circuit breaking capacities (Icu)
Switch-disconnector
With main switch characteristics to IEC/EN 60204
and VDE 0113 isolating characteristics to IEC/EN 60947,
VDE 0660 without overload and short-circuit release
Circuit-breakers, switch-disconnectors
Economic switching capacity Basic switching capacity Comfort switching capacity Normal switching capacity
18 kA at 415 V 50/60 Hz 25 kA at 415 V 50/60 Hz 36 kA at 415 V 50/60 Hz 50 kA at 415 V 50/60 Hz
Rated current = rated Setting range Part no. Price Part no. Price Part no. Price Part no. Price Std. pack Notes
uninterrupted current Article no. see price Article no. see price Article no. see price Article no. see price
list list list list
Overload releases Short-circuit
releases
In = Iu Ir Ii
A A A
I
Circuit-breakers, switch-disconnectors
Economic switching capacity Basic switching capacity Comfort switching capacity
18 kA at 415 V 50/60 Hz 25 kA at 415 V 50/60 Hz 36 kA at 415 V 50/60 Hz
Rated current = rated Setting range Part no. Price Part no. Price Part no. Price Std. pack Notes
uninterrupted current Article no. see price Article no. see price Article no. see price
list list list
Overload releases Short-circuit
releases
In = Iu Ir Ii
A A A
I
Circuit-breakers, switch-disconnectors
Comfort switching capacity Normal switching capacity
36 kA at 415 V 50/60 Hz 50 kA at 415 V 50/60 Hz
Rated current = rated Setting range Part no. Price Part no. Price Std. pack Notes
uninterrupted current Article no. see price list Article no. see price list
Overload Short-circuit releases
releases
Non-delayed Delayed short-
circuit release
In = Iu Ir Ii Isd
A A A A
I I
Circuit-breakers, switch-disconnectors
Ecconomic switching capacity Basic switching capacity Comfort switching capacity Normal switching capacity
18 kA at 415 V 50/60 Hz 25 kA at 415 V 50/60 Hz 36 kA at 415 V 50/60 Hz 50 kA at 415 V 50/60 Hz
Rated current = Setting range Part no. Price Part no. Price Part no. Price Part no. Price Std. pack Notes
rated Overload Neutral Short-circuit Article no. see price Article no. see price Article no. see price Article no. see price
uninterrupted releases conductor releases list list list list
current
In = Iu Ir Ir Ii
A A A A
I
Circuit-breakers, switch-disconnectors
Economic switching capacity Basic switching capacity Comfort switching capacity
18 kA at 415 V 50/60 Hz 25 kA at 415 V 50/60 Hz 36 kA at 415 V 50/60 Hz
Rated current = Setting range Part no. Price Part no. Price Part no. Price Std. Notes
rated Overload Neutral Short-circuit Article no. see price Article no. see price Article no. see price pack
uninterrupted releases conductor releases list list list
current
In = Iu Ir Ir Ii
A A A A
I
Circuit-breakers, switch-disconnectors
Comfort switching capacity Normal switching capacity
36 kA at 415 V 50/60 Hz 50 kA at 415 V 50/60 Hz
Rated current = rated Setting range Part no. Price Part no. Price Std. pack Notes
uninterrupted current Overload releases Short-circuit Delayed Article no. see price Article no. see price
releases short-circuit list list
Non-delayed release
In = Iu Ir Ii Isd
A A A A
I I
3 switch positions I, +, 0;
can be tripped remotely with shunt/undervoltage release
3 pole 4 pole
Rated current = Short-circuit Part no. Price Part no. Price Std. pack
rated uninterrupted protection max. fuse Article no. see price Article no. see price
current gL-characteristic list list
In = Iu
A A gL
Switch-disconnectors
Terminals standard, terminal screws as accessories
63 125 LN1-63-I LN1-4-63-I 1 off
111994 111998
100 125 LN1-100-I LN1-4-100-I
111995 111999
125 125 LN1-125-I LN1-4-125-I
111996 112000
160 160 LN1-160-I LN1-4-160-I
111997 112001
Terminal screws standard, terminals as accessories
160 250 LN2-160-I LN2-4-160-I 1 off
112002 112005
200 250 LN2-200-I LN2-4-200-I
112003 112006
250 250 LN2-250-I LN2-4-250-I
112004 112007
Notes Main switch characteristics including positive drive to IEC/EN 60204 and VDE 0113
Isolating characteristics to IEC/EN 60947-3 and VDE 0660
Protection against accidental contact according to IEC 100
Notes for terminals a 21
Notes 19
Circuit-breakers, switch-disconnectors
20 Ordering Ordering 21
Connection types Connection types
LZM1 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM1
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Part no. Price
Max. cable connection For use with Terminal capacities Terminal capacities Article no. when see price Std. pack Notes
area ordered separately list
Type of conductor AWG/kcmil Cu strip (number of segments Copper busbar width x
x width x segment thickness
thickness)
mm2 mm mm
Box terminal
Standard equipment
LZM1(-4) Three- and four-pole Cu cable 1 x 10 701) 1 x 8 2/0 2 x 9 x 0.8 NZM1-XKC 1 off Standard connection with all switches LZM1 and LN1.
LN1(-4) 2 x 6 25 2x94 9 x 9 x 0.8 260015 Conversion kit for circuit-breaker with screw connection.
10
Screw connection
LZM1(-4) Three- and four-pole Copper cable lugs 1 x 10 70 1 x 8 2/0 min. 12 x 5 NZM1-XKS 1 off Type contains parts for a terminal located at top or
LN1(-4) 2 x 6 25 2x94 max. 16 x 5 260019 bottom for 3 or 4-pole circuit-breakers.
Aluminium cable lug 1 x 10 35 1x82 min. 12 x 5 NZM1-4-XKS 1 off Fitted outside the switch housing
2 x 10 35 2x82 max. 16 x 5 266725 Mounting of the cover NZM1(-4)-XKSA obligatory
o 6.5 (supplied).
7
16
Tunnel terminal
LZM1(-4) Three- and four-pole Copper cable 1 x 16 95 1 x 6 3/0 NZM1-XKA 1 off Type contains parts for a terminal located at top or
LN1(-4) Al cable 266730 bottom for 3 or 4-pole circuit-breakers.
NZM1-4-XKA 1 off A standard with control circuit terminal for
14.5 266731 1 x 0.75 2.5 mm2 (18 14 AWG) or
2 x 0.75 1.5 mm2 (18 14 AWG) copper conductors.
Fitted outside the switch housing
Use with flexible and highly flexible conductors ferrules.
Maximum specified cross-section can only be connected
when stranded and without ferrules.
Mounting of the cover NZM1(-4)-XKSA obligatory
(supplied).
Connection on rear
LZM1(-4) Three- and four-pole Copper cable lugs 1 x 2.5 25 F 12 x 5 NZM1-XKR 1 off Type contains parts for a terminal located at top or
LN1(-4) 2 x 2.5 25 F 16 x 5 266734 bottom for 3 or 4-pole circuit-breakers.
Aluminium cable lug 1 x 10 35 NZM1-4-XKR 1 off
2 x 10 35 266737
Circuit-breakers, switch-disconnectors
Part no. Price
Max. cable connection For use with Terminal capacities Article no. when see price Std. pack Notes
area ordered separately list
Type of conductor AWG/kcmil
mm2
Cover
LZM1(-4) 3 pole NZM1-XKSA 1 off Type contains parts for a terminal located at top or bottom for 3 or 4-pole circuit-breakers.
LN1(-4) 260021 Protection against direct contact where cable lugs, busbars or tunnel terminals are used
4 pole NZM1-4-XKSA 1 off Contained in kit with tunnel terminals or screw connection terminals.
266741 Degree of protection IP1X on the connection side when using insulated conductor material.
Circuit-breakers, switch-disconnectors
Max. cable For use with Terminal capacities Terminal capacities Part no. Price Part no. Price Std. Notes
connection area Type of Terminal AWG/kcmil Cu strip (number of Copper busbar Article no. when ordered see price Article no. when ordered see price pack
conductor capacities segments x width x width x with basic unit list separately list
segment thickness) thickness
mm2 mm mm
Box terminal
LZM2(-4) Three- Copper 1 x 4 185 1 x 11 350 f 2 x 9 x 0.8 +NZM2-160-XKCO NZM2-160-XKC 1 off Type suffix and type contain parts for a circuit-breaker
LN2(-4) and four- conductors 2 x 4 70 2 x 12 2/0 262218 262240 side at top or bottom for 3 or 4 pole circuit-breakers.
pole Cu cable +NZM2-160-XKCU Conversion kit for circuit-breaker with screw connection.
15
Tunnel terminal
LZM2(-4) Three- Copper cable 1 x 16 185 1 x 6 350 NZM2-XKA 1 off Type contains parts for a terminal located at top or
LN2(-4) and four- Al cable 1 x 16 185 271457 bottom for 3 or 4-pole circuit-breakers.
pole A standard with control circuit terminal for
1 x 0.75 2.5 mm2 (18 14 AWG) or
20.5 2 x 0.75 1.5 mm2 (18 16 AWG) copper conductors.
NZM2-4-XKA 1 off Fitted outside the switch housing
271458 Use with flexible and highly flexible conductors ferrules.
Maximum specified cross-section can only be connected
when stranded and without ferrules.
Mounting of the cover NZM2(-4)-XKSA obligatory
(supplied).
Connection on rear
When using cable lugs without NZM3(-4)-XKSA cover, they must be insulated.
LZM2(-4) Three- Copper cable 1 x 4 185 f 2 x 16 x 0.8 f 16 x 5 +NZM2-XKRO NZM2-XKR 1 off Type suffix and type contain parts for a circuit-breaker
LN2(-4) and four- lugs 2 x 4 70 F 6 x 24 x 0.5 F 20 x 5 266763 266765 side at top or bottom for 3 or 4-pole circuit-breakers.
pole 1 x 10 50 +NZM2-XKRU NZM2-4-XKR O = for fitting at the top
Aluminium cable 2 x 10 50 266764 266768 U = for fitting at the bottom
lug
+NZM2-4-XKRO
266766
+NZM2-4-XKRU
266767
Notes 1) Up to 240 mmB can be connected depending on the cable manufacturer.
26 Ordering Ordering 27
Connection types Connection types
LZM2 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM2
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Max. cable connection For use with Terminal capacities Part no. Price Std. Notes
area Type of conductor Terminal capacities AWG/kcmil Copper busbar Article no. when ordered see price pack
width x separately list
thickness
mm
mm2
Cover
LZM2 3 pole NZM2-XKSA 1 off Type contains parts for a terminal located at top or bottom for 3 or 4-pole circuit-breakers.
LN2 260038 Protection against direct contact where cable lugs, busbars or tunnel terminals are used
LZM2-4 4 pole NZM2-4-XKSA 1 off Degree of protection IP1X on the connection side when using insulated conductor material.
LN2-4 266770
Circuit-breakers, switch-disconnectors
Max. cable connection Rated For use with Terminal capacities Terminal capacities Part no. Price Part no. Price Std. pack Notes
area current1) Article no. when see Article no. when see
In Type of Terminal AWG/kcmil Cu strip (number of Copper busbar ordered with price ordered price
conductor capacities segments x width x width x basic unit list separately list
segment thickness) thickness
A mm2 mm mm
Box terminal
max. 500 LZM3(-4) Three- and Copper 1 x 35 240 1 x 2 500 min. 6 x 16 x 0.8 +NZM3-XKCO NZM3-XKC 1 off Type suffix and type contain parts for a circuit-
400 UL/CSA LN3(-4) four-pole conductors 2 x 16 120 max. 20 x 24 x 0.5 262246 260042 breaker side at top or bottom for 3 or 4-pole
Cu cable or +NZM3-XKCU circuit-breakers.
16
Screw connection
630 LZM3(-4) Three- and Copper cable 1 x 16 240 1 x 4 350 10 x 32 x 1.0 30 x 10 NZM3-XKS 1 off Type contains parts for a terminal located at top or
LN3(-4) four-pole lugs 2 x 16 240 2 x 350 + 5 x 32 x 1.0 + 30 x 5 260039 bottom for 3 or 4-pole circuit-breakers.
15
max. 400 1 x 10 120 NZM3-4-XKS 1 off Standard connection with all LZM3 circuit-breakers
Aluminium 2 x 10 120 266780 and LN3 switch-disconnectors.
o 10.5 cable lug Conversion kit for circuit-breaker with box
32 terminal.
Use special cable lugs narrow version, a 32
Fitted within the switch housing
When a busbar is used insulation is required
(400 mm) e.g. using heat shrink and a shroud
NZM3(-4)-XKSA.
Ue f 525 V AC:
A shroud NZM3(-4)-XKSA must be used with all
other connection types.
Notes 1) The following applies for the rated current: The values have been determined conform
to IEC/EN 60947 (switchgear standard) and generally relate to the max. defined cross-
sections and are intended for the purpose of orientation.
30 Ordering Ordering 31
Connection types Connection types
LZM3 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM3
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Max. cable Rated For use with Terminal capacities Terminal capacities Part no. Price Part no. Price Std. Notes
connection area current1) Article no. when see Article no. when see pack
Type of Terminal AWG/kcmil Cu strip (number of Copper ordered with price ordered price
conductor capacities segments x width x busbar width basic unit list separately list
In segment thickness) x thickness
A mm2 mm mm
22.5
Connection on rear
not UL/CSA approved
max. 630 LZM3(-4) Three- and four- Copper 1 x 16 240 +NZM3-XKRO NZM3-XKR 1 off Type suffix and type contain parts for a circuit-
LN3(-4) pole cables 2 x 16 240 266790 266792 breaker side at top or bottom for 3 or 4-pole circuit-
Cu cable +NZM3-XKRU NZM3-4-XKR 1 off breakers.
266791 266795 O = for fitting at the top
U = for fitting at the bottom
+NZM3-4-XKRO
266793
+NZM3-4-XKRU
266794
max. 500 1 x 10 120 min.6 x 16 x 0.8 Min. 20 x 5
2 x 10 120 Max. 10 x 32 x 1.0 Max. 30 x 10
Control circuit terminal
LZM3(-4) Three- and four- Screw 1 x 0.75 2.5 1 x 18 14 NZM3/4-XSTS 1 off Type contains parts for two terminal locations
LN3(-4) pole connection 2 x 0.75 1.5 2 x 18 16 266797 located at top or bottom for 3 or 4 pole circuit-
breakers.
Included as standard with tunnel terminal
Degree of protection IP1X
LZM3(-4) Box NZM-XSTK 1 off Height or thickness of the control circuit terminals
LN3(-4) terminal 266739 NZM-XSTS = 2 mm
Notes 1) The following applies for the rated current: The values have been determined conform to
IEC/EN 60947 (switchgear standard) and generally relate to the max. defined cross-sections
and are intended for the purpose of orientation.
The engineering standards which apply in each case must be observed.
32 Ordering Ordering 33
Connection types Connection types
LZM3 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM3
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Max. cable connection For use with Part no. Price Std. pack Notes
area Article no. when see price
ordered separately list
Cover
LZM3(-4) 3 pole NZM3-XKSA 1 off Type contains parts for a terminal located at top or bottom for 3 or 4-pole circuit-breakers.
LN3(-4) 260045 Insulation/protection against direct contact where cable lugs, busbars or tunnel terminals are used.
4 pole NZM3-4-XKSA 1 off Included in set with tunnel terminals
266801 Degree of protection IP1X on the connection side when using insulated conductor material.
Phase isolator
LZM3(-4) 3 pole NZM3-XKP 1 off Type contains parts for a terminal located at top or bottom for 3 or 4 pole circuit-breakers.
LN3(-4) 100512 Included with the connection width extension.
4 pole NZM3-4-XKP 1 off Cannot be combined with the NZM3(-4)-XKA tunnel terminal, NZM3(-4)-XKR connection on rear.
100513 Insulation protection with connection of cable lugs, busbars or braid.
Circuit-breakers, switch-disconnectors
Max. cable connection area Rated For use with Terminal capacities Terminal capacities Part no. Price Std. pack Notes
current1) Article no. when see price
Type of Terminal AWG/kcmil Cu strip (number of Copper busbar width ordered separately list
conductor capacities segments x width x x thickness
In segment thickness)
A mm2 mm mm
Screw connection
Standard equipment
2-hole max. 1250 LZM4(-4) Three- and Cu cable lugs 1 x 120 185 1 x 250 350 (2 x) 10 x 50 x 1.0 (2 x) 50 x 10 off Double hole fitting for M10 screws with 25 mm clearance.
LN4(-4) four-pole 4 x 50 185 4 x 0 350 Use special cable lug narrow version.
20
Ue f 525 V or cross-section > 185 mm2: Use of shroud NZM4(-4)-
XKSA required.
o10.5 o10.5 1600 off
25
50
Module plate
Single max. 1250 LZM4, LN4 3 pole Copper cable 1 x 120 300 1 x 250 600 (2 x) 10 x 40 x 1.0 (2 x) 40 x 10 NZM4-XKM1 1 off Type contains parts for a terminal located at top or bottom for 3 or
hole lugs 2 x 95 300 2 x 000 600 (2 x) 10 x 50 x 1.0 (2 x) 50 x 10 266814 4-pole circuit-breakers.
LZM4-4 4 pole NZM4-4-XKM1 1 off For M10 screws. Can be enlarged for M12 screws.
LN4-4 266815 Use special cable lug narrow version.
Can be fitted to circuit-breaker with screw termination
Double max. 1400 LZM4, LN4 3 pole Copper cable 2 x 95 185 2 x 000 350 NZM4-XKM2 1 off Insulation through NZM4(-4)-XKSA cover or NZM4(-4)-XKP phase
hole lugs 4 x 35 185 4 x 2 350 266820 separator necessary
LZM4-4 4 pole 4 x 50 NZM4-4-XKM2 1 off
LN4-4 266821
Double max. 1250 LZM4, LN4 3 pole Copper cable 2 x 95 300 2 x 000 600 NZM4-XKM2S- 1 off Type contains parts for a terminal located at top or bottom for 3 or
hole lugs 1250 4-pole circuit-breakers.
284471 Insulation through cover NZM4(-4)-XKSA or phase isolator
LZM4-4 4 pole NZM4-4-XKM2S- 1 off NZM4(4)-XKP necessary.
LN4-4 1250
284472
max. 1600 LZM4, LN4 3 pole Copper cable 2 x 95 300 2 x 000 500 NZM4-XKM2S- 1 off
lugs 1600
284473
LZM4-4 4 pole 2 x 95 300 2 x 000 500 NZM4-4-XKM2S- 1 off
LN4-4 1600
284474
Connection width extension
max. 1600 LZM4, LN4 3 pole Cu cable lugs 4 x 300 4 x 600 min. 10 x 50 x 1.0 max. (2 x) 80 x 10 NZM4-XKV95 1 off Type contains parts for a terminal located at top or bottom for 3 or
6 x 95 240 6 x 000 281591 4-pole circuit-breakers.
500 NZM4-XKV110 1 off Five way holes, e.g. for up to 9 cable lugs per phase.
281593 Can be fitted to circuit-breaker with screw termination
Phase isolator supplied.
LZM4-4 4 pole NZM4-4-XKV95 1 off Distance between pole centres with NZM4(-4)-XKV95: 95 mm
LN4-4 281592 Installation conditions for current transformer up to 130 mm width
NZM4-4-XKV120 1 off with 80 mm busbar width.
281594 Distance between pole centres with NZM4-XKV110: 107.5 mm
Installation conditions for current transformer up to 135 mm width
with 80 mm busbar width.
Distance between pole centres with NZM4-4-XKV120: 122 mm
Installation conditions for current transformer up to 164 mm width
with 80 mm busbar width.
4 mm drilled holes for control circuit terminal available.
Notes 1) Thefollowing applies for the rated current: The values have been determined conform to IEC/EN 60947
(switchgear standard) and generally relate to the max. defined cross-sections and are intended for the
purpose of orientation.
36 Ordering Ordering 37
Connection types Connection types
LZM4 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM4
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Max. cable connection area Rated For use with Terminal Terminal capacities Part no. Price Std. pack Notes
current1) capacities Article no. when see price
In Type of Terminal AWG/kcmil Cu strip (number of Copper busbar ordered separately list
conductor capacities segments x width x width x
segment thickness) thickness
A mm
mm2 mm
Tunnel terminal
max. 1400 LZM4, LN4 3 pole Copper 1 x 50 240 1 x 0 500 NZM4-XKA 1 off Type contains parts for a terminal located at top or bottom
conductors 4 x 50 240 4 x 0 500 266836 for 3 or 4 pole circuit-breakers.
LZM4-4 4 pole Cu cable 1 x 50 240 1 x 0 500 NZM4-4-XKA 1 off A standard with control circuit terminal for
LN4-4 Al 4 x 50 240 4 x 0 500 266837 1 x 0.75 2.5 mm2 (18 14 AWG) or
conductors 2 x 0.75 1.5 mm2 (18 16 AWG) copper conductors.
Al cable Can be fitted to circuit-breaker with screw termination
22.5 Use ferrules with flexible and highly flexible conductors. Max.
cross section shown can only be connected when flexible and
without ferrules.
Use of the NZM4(-4)-XKSA cover obligatory(supplied).
Connection on rear
max. 1250 LZM4(-4) Three- and Copper cable 1 x 120 185 (2 x) 10 x 50 x 1.0 (2 x) 50 x 10 NZM4-XKR 1 off Type contains parts for a terminal located at top or bottom
LN4(-4) four-pole lugs 2 x 95 185 266842 for 3 or 4-pole circuit-breakers.
4 x 35 185 NZM4-4-XKR 1 off Can also be retrofitted:
1 x 185 266843 NZM4...-XKM... module plate or NZM4-...-XKV... connection
Aluminium 2 x 70 185 width extension
cable lug 4 x 50 185
1600 off
Notes 1) The following applies for the rated current: The values have been determined conform to IEC/EN 60947
(switchgear standard) and generally relate to the max. defined cross-sections and are intended for the purpose
of orientation.
38 Ordering Ordering 39
Connection types Connection types
LZM4 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM4
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Max. cable connection area For use with Terminal capacities Part no. Price Std. pack Notes
Article no. when ordered see price
Type of conductor Terminal AWG/kcmil separately list
capacities
mm2
Cover
LZM4 3 pole NZM4-XKSA 1 off Type contains parts for a terminal located at top or bottom for 3 or 4 pole circuit-breakers.
LN4 266846 Protection against direct contact where cable lugs, busbars, flat cable terminals or tunnel terminals are used.
LZM4-4 4 pole NZM4-4-XKSA With module plates, flat braid terminals and tunnel terminals included in the kit.
LN4-4 266847 When using insulated conductor material to degree of protection: IP1X.
Phase isolators
LZM4 3 pole NZM4-XKP 1 off Type contains parts for a terminal located at top or bottom for 3 or 4-pole circuit-breakers.
LN4 281595 Included with the connection width extension.
Cannot be combined with the tunnel terminal NZM4(-4)-XKA, connection NZM4-XKR on rear.
Insulation protection where cable lugs, busbars, module plates or flat cable terminals are used.
LZM4-4 4 pole NZM4-4-XKP
LN4-4 281596
Cable lug
185 mm2 LZM3(-4) 3 and 4 pole NZM3-XKS185 3 off Type contains a cable lug for 3-pole or 4-pole switches.
LZM4(-4) 260040 Special cable lug, narrow style
900 mm2 LN3(-4) NZM3-XKS240
LN4(-4) 260041
40 Ordering
Plug-in units
NZM2-XSV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
For use with Number of poles Part no. Price Part no. Price Std. Notes
Article no. when see price Article no. when see price pack
ordered with list ordered list
basic unit separately
Sockets
e.g. for reserved slots
Retrofit of circuit-breaker with plug-in module.
Terminal screws standard, terminals as accessories
Removable module
Fits socket base
Only in combination with circuit-breaker
LZM2 3 pole +NZM2-XSVE 1 off
LN2 266701
LZM2-4 4 pole +NZM2-4-XSVE
LN2-4 266702
Circuit-breakers, switch-disconnectors
For use with Number of Part no. Price Part no. Price Std. Notes
poles Article no. when see price Article no. when see price pack
ordered with basic list ordered list
unit separately
Withdrawable unit
with control circuit plug unit
For circuit-breakers LZM and switch-disconnectors LN
Withdrawable unit with auxiliary plug-in adapter
Complete
Only in combination with circuit-breaker
Terminal screws standard, terminals as accessories
LZM3 3 pole +NZM3-XAV 1 off Inmax. at:
LN3 266707 20 C: 605 A (LZM3), 1600 A
LZM3-4 4 pole +NZM3-4-XAV (LZM4)
LN3-4 266708 40 C: 550 A (LZM3), 1500 A
(LZM4)
LZM4 3 pole +NZM4-XAV
LN4 266709 Mounting position
LZM4-4 4 pole +NZM4-4-XAV LZM3: vertical, 90 left
LN4-4 266710 LZM4: vertical
3 positions
Connected, test, disconnected
The 3 positions are indicated
mechanically.
Withdrawable carrier
LZM3 3 pole +NZM3-XAVE 1 off
LN3 266715
LZM3-4 4 pole +NZM3-4-XAVE
LN3-4 266716
LZM4 3 pole +NZM4-XAVE
LN4 266717
LZM4-4 4 pole +NZM4-4-XAVE
LN4-4 266718
42 Ordering Ordering 43
Auxiliary contact with screw terminals Auxiliary contact with screw terminals
LZM, M22- Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM, M22-
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
For use with Auxiliary contacts: f = safety Contact Part no. Price Part no. Price Std. pack Notes Notes
function, by positive opening to sequence Article no. when see price Article no. see price
IEC/EN 60947-5-1 ordered list when list
separately ordered
N/O = Normally N/C = Normally separately
open closed
Auxiliary contacts
Standard auxiliary contact (HIN)
Switching with the main contacts
Used for indicating and interlocking tasks
LZM1(-4), 2(-4), 3(-4), 4(-4) 1 N/O 1.X3 M22-K10 M22-CK10 20 off For Std. pack: The following can be clipped into the switches:
LN1(-4), 2(-4), 3(-4), 4(-4) 216376 216384 M22-(C)K... : LZM1- one standard auxiliary contact
1.X4 Std. pack = 20 off LZM2 - up to 2 standard auxiliary contacts M22-(C)K
1 N/C f 1.X1 M22-K01 M22-CK01 20 off LZM3 and LZM4 - up to 3 standard auxiliary contacts M22-(C)K
216378 216385 Any combinations of the auxiliary contact types ispossible.
1.X2
Marking on switch: HIN
With 3 m connection LZM1(-4), 2(-4), 3(-4), 4(-4) 1 N/O 1 N/C f 1.X3 1.X1 M22-CK11 20 off
cable instead of LN1(-4), 2(-4), 3(-4), 4(-4) 107940
screw termination. 1.X4 1.X2
LZM4(-4) 2 N/O 3.13 3.23 NZM4-XHIV Not in conjunction with undervoltage release NZM-XU, shunt release
LN4(-4) 266172 NZM-XA or remote operator NZM-XR
3.14 3.24 Early make with switch on (manual actuation): approx. 90 ms
For use with Rated control voltage Part no. Price Std. pack Notes
Us Article no. when see price
ordered separately list
V
Undervoltage releases
Without auxiliary contact
Non-delayed disconnection of LZM circuit-breakers or LN switch-disconnectors
when the control voltage sinks below 35 70% US.
For use with Emergency-Stop devices in conjunction with Emergency-Stop button.
Circuit-breakers, switch-disconnectors
For use with Rated control voltage Part no. Price Std. pack Notes
Us Article no. when ordered see price
separately list
V
Undervoltage releases
Without auxiliary contact
Non-delayed disconnection of LZM circuit-breakers or LN switch-disconnectors
when the control voltage sinks below 35 70% US.
For use with Emergency-Stop devices in conjunction with Emergency-Stop button.
For use Rated control voltage Part no. Price Std. pack Notes
with Article no. when ordered see price
Us separately list
V
Undervoltage releases
With two early-make auxiliary contacts
For interlocking and load-shedding circuits, as well as for early-make of the
undervoltage release in main-switch applications.
Circuit-breakers, switch-disconnectors
For use with Rated control voltage Part no. Price Std. pack Notes
Article no. when ordered see price
Us separately list
V
Undervoltage releases
With two early-make auxiliary contacts
For interlocking and load-shedding circuits, as well as for early-make
of the undervoltage release in main-switch applications.
For use with Rated control voltage Part no. Price Std. pack
Article no. when ordered separately see price
Us list
V
Undervoltage releases
With two separate early-make auxiliary contacts
Coil connection wired to clamp terminal, auxiliary switch connections wired with 3 m loose
connection cables
LZM1(-4), LN1(-4) 24 V 50/60 Hz NZM1-XUHIV20KL24AC 1 off
D1 3.13 3.23
284388
110 V 130 V 50/60 Hz NZM1-XUHIV20KL110-130AC
D2 3.14 3.24 284389
208 V 240 V 50/60 Hz NZM1-XUHIV20KL208-240AC
284400
24 V DC NZM1-XUHIV20KL24DC
284387
Coil connection with 3 m loose connection cables, auxiliary switch connections wired to clamp
terminal
LZM1(-4), LN1(-4) 24 V 50/60 Hz NZM1-XUHIV20LK24AC 1 off
D1 3.13 3.23
284402
110 V 130 V 50/60 Hz NZM1-XUHIV20LK110-130AC
D2 3.14 3.24 284403
208 V 240 V 50/60 Hz NZM1-XUHIV20LK208-240AC
284404
24 V DC NZM1-XUHIV20LK24DC
284401
Coil connection with 3 m loose connection cables, auxiliary switch connections wired to clamp
terminal
LZM2(-4), LN2(-4) 24 V 50/60 Hz NZM2/3-XUHIV20LK24AC 1 off
D1 3.13 3.23
LZM3(-4), LN3(-4) 285291
110 V 130 V 50/60 Hz NZM2/3-XUHIV20LK110-130AC
D2 3.14 3.24 284407
208 V 240 V 50/60 Hz NZM2/3-XUHIV20LK208-240AC
284408
24 V DC NZM2/3-XUHIV20LK24DC
284405
Notes When the undervoltage release is de-energized, accidental contact with the main switches of the switch during attempts to switch on is safely
prevented.
Early-make of the auxiliary contacts with on and off switching (manual operation): approx. 20 ms.
Cannot be used in conjunction with NZM...-XR... remote operator.
Undervoltage releases cannot be installed simultaneously with NZM...-XHIV... early-make auxiliary contact or NZM...-XA... shunt release.
Ordering 49
Undervoltage releases, off-delayed
http://catalog.moeller.net Moeller SK1230-1177GB LZM1, LZM2/3..., LZM4
Circuit-breakers, switch-disconnectors
For use with Part no. Price Std. pack Notes
Article no. when see price
ordered separately list
For use Rated control voltage Part no. Price Std. Notes
with Article no. when ordered see price pack
Us separately list
V
Shunt releases
Without auxiliary contact
Switches are tripped by a voltage pulse or by the application of uninterrupted
voltage.
With clamp LZM1(-4) 12 V AC/DC NZM1-XA12AC/DC 1 off When the undervoltage
terminal on the LN1(-4) 259706 release is de-energized,
left-hand switch 24 V AC/DC NZM1-XA24AC/DC accidental contact with the
side. 259708 main contacts of the switch
during attempts to switch
110 V 130 V AC/DC NZM1-XA110-130AC/DC on, is safely prevented.
259724
Shunt release cannot be
installed simultaneously
C1 208 V 250 V AC/DC NZM1-XA208-250AC/DC with NZM...-XHIV... early-
259726 make auxiliary contact or
C2 380 V 440 V AC/DC NZM1-XA380-440AC/DC NZM...-XU... undervoltage
259728 release.
With 3 m LZM1(-4) 12 V AC/DC NZM1-XAL12AC/DC 1 off
connection cable LN1(-4) 259734
instead of screw 24 V AC/DC NZM1-XAL24AC/DC
termination. 259736
110 V 130 V AC/DC NZM1-XAL110-130AC/DC
259742
Circuit-breakers, switch-disconnectors
For use with Part no. Price Std. pack Notes
Article no. when see price
ordered list
separately
Shunt releases
Capacitor unit 230 V 50/60 Hz
in conjunction with NZM...-XA2082-50AC/DC
shunt release
Enclosure: degree of protection IP20
LZM1(-4) NZM-XCM 1 off Enables the safe use of circuit-breakers as mesh network circuit-breakers
LZM2(-4) 229413 in the range from 0 110 % Un with constant switch-off time of 40 ms.
LZM3(-4) If the mains voltage is absent, the installed capacitor supplies power for
LZM4(-4) actuating the shunt release for at least 12 hours.
LN1(-4) The configuration of the capacitor unit is undertaken independently of the
LN2(-4) circuit-breaker.
LN3(-4) Connect NZM-XCM to the power feed side.
LN4(-4)
Design note:
Connect a standard auxiliary contact as N/O in series with the shunt
release!
Standard auxiliary contact not included as standard.
Us
V
Shunt releases
Without auxiliary contacts
For mesh-network circuit-breakers
For intermittent operation
Maximum on time = 1 s
Operating range 10 110 % Us
C1 LZM3(-4) 230 V AC NZM3-XA-230AC-MNS 1 off Cannot be installed simultaneously with
LN3(-4) 274097 NZM...-XHIV... early-make auxiliary contact or
NZM...-XU... undervoltage release.
C2
a
-S11
0
1.13
Q M22-...K10
HIN 1.14
C1
-Q1 NZM...-XA...-MNS
C2
N (L-, L2)
For use Rated control voltage Part no. Price Std. Notes
with Article no. when ordered see price pack
Us separately list
V
Shunt releases
With early-make auxiliary contact
Not in combination with remote operator.
With clamp LZM1(-4) 12 V AC/DC NZM1-XAHIV12AC/DC 1 off When the shunt release is
terminal on LN1(-4) 259772 energized, accidental
the left-hand 24 V AC/DC NZM1-XAHIV24AC/DC contact with the main
switch side. 259774 contacts of the switch
during attempts to switch on
110 V 130 V AC/DC NZM1-XAHIV110-130AC/DC is safely prevented.
259780 Early-make of the auxiliary
contact with on and off
switching (manual
C1 3.13 208 V 250 V AC/DC NZM1-XAHIV208-250AC/DC operation): approx. 20 ms.
259782 Shunt release cannot be
C2 3.14 380 V 440 V AC/DC NZM1-XAHIV380-440AC/DC installed simultaneously
259784 with NZM...-XHIV... early-
make auxiliary contact or
With 3 m LZM1(-4) 12 V AC/DC NZM1-XAHIVL12AC/DC 1 off NZM...-XU... undervoltage
connection LN1(-4) 259790 release.
cable instead 24 V AC/DC NZM1-XAHIVL24AC/DC
of screw 259792
termination.
110 V 130 V AC/DC NZM1-XAHIVL110-130AC/DC
259798
Circuit-breakers, switch-disconnectors
For use Rated control Part no. Price Std. pack
with voltage Article no. when ordered see price
Us separately list
V
Shunt releases
For mesh-network circuit-breakers
For intermittent operation
Maximum on time = 1 s
Operating range 10 110 % Us
C1 3.13 With early-make auxiliary LZM3(-4) 230 V AC NZM3-XAHIV-230AC-MNS 1 off
contact LN3(-4) 274141
C2 3.14
Notes Cannot be installed simultaneously with NZM...-XHIV... early-make auxiliary contact or NZM...-XU... undervoltage release.
Cannot be used in conjunction with NZM...-XR... remote operator.
Intermittent operation guaranteed by series connection of a N/O contact M22-(C)K10 (standard auxiliary contact).
The maximum operating time of the shunt release for mesh network circuit-breaker is 1 s.
LZM3: Early-make of the auxiliary contact with on and off switching (manual operation): approx. 20 ms.
LZM4: Early-make of the auxiliary contact with switch on (manual operation): approx. 90 ms.
54 Ordering Ordering 55
Door coupling rotary handles Door coupling rotary handles
LZM1, LZM2, LZM3, LZM4 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM1, LZM2, LZM3, LZM4
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
For a max. shaft length of 60 mm Extremely narrow fittings
For use with Part no. Price Std. pack Notes Part no. Price Std. pack Notes Part no. Price Std. pack Notes
Article no. see price Article no. see price Article no. see price
list list list
Extension shaft
Max. mounting depth: LZM1(-4), LN1(-4) NZM1/2-XV4 1 off Can be cut to required length
400 mm LZM2(-4), LN2(-4) 261232
LZM3(-4), LN3(-4) NZM3/4-XV4
LZM4(-4), LN4(-4) 261234
Max. mounting depth: LZM1(-4), LN1(-4) NZM1/2-XV6
600 mm LZM2(-4), LN2(-4) 260191
LZM3(-4), LN3(-4) NZM3/4-XV6
LZM4(-4), LN4(-4) 260193
Notes Circuit-breaker can also be installed in a lying position 90 left/right, with the handle still in the same position.
56 Ordering
Rotary handles
NZM-XDV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Lockable on the 0 position LZM1(-4), LN1(-4) NZM1-XDVG 1 off Can also be combined with insulating
on the handle using up to 285247 surround.
3 padlocks.
LZM2(-4), LN2(-4) NZM2-XDVG
285248
Lockable on the 0 position LZM1(-4), LN1(-4) NZM1-XDVGR Can also be combined with insulating
on the handle using up to 285249 surround.
3 padlocks.
LZM2(-4), LN2(-4) NZM2-XDVGR
285280
Notes Circuit-breaker can also be installed in a lying position 90 left/right, with the handle still in the same position.
Ordering 57
Rotary handles with door interlock
http://catalog.moeller.net Moeller SK1230-1177GB NZM...-XDTV...
Circuit-breakers, switch-disconnectors
For use with Part no. Price Std. Notes
Article no. when see price pack
ordered separately list
Rotary handle
Divergent to normal IEC handles: Door opening only possible with active
rotation beyond the 0 position.
Complete with rotary drive and insulating surround
Standard, black/grey
Lockable on the LZM1(-4), LN1(-4) NZM1-XDTV-NA 1 off Door interlock
0 position on the handle 271453 In the ON position, can be defeated from
using up to 3 padlocks. the outside using a 1 mm pin
Also available with door LZM2(-4), LN2(-4) NZM2-XDTV-NA Not defeated in the locked OFF and ON
interlock e.g. for MCC 271454 positions
service distribution. Door opening only possible with active
rotation beyond the 0 position.
Can only be switched ON when the door
Red-yellow for Emergency-Stop is closed
Lockable on the LZM1(-4), LN1(-4) NZM1-XDTVR-NA Cannot be combined with mechanical
0 position on the handle 271455 interlock
using up to 3 padlocks.
Also available with door LZM2(-4), LN2(-4) NZM2-XDTVR-NA
interlock e.g. for MCC 271456
service distribution.
Notes Circuit-breaker can also be installed in a lying position 90 left/right, with the handle still in the same position.
58 Ordering
Main switch assembly kit
NZM...-XHB..., NZM...-XS... Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Type For use with Part no. Price Std.
Article no. when see price pack
ordered separately list
Main switch assembly kit for side panel mounting with mounting bracket
For direct mounting of circuit-breaker and handle in the side wall of the control cabinet
Equipment supplied:
Door coupling rotary handle
Mounting bracket
Special short extension shaft
External warning plate/designation label in German/English
Black and yellow flash
For enhanced protection against direct contact on the incomer side, IP2X protection against contact with a finger can be
ordered a 23
Other external warning plates/designation labels can also be clipped on.
Standard, black/grey
Can be locked in 0 position, with adequate For operation on LZM1(-4), LN1(-4) NZM1-XSM-L 1 off
modification also in I position. Narrowest minimum the left 266663
clearance between enclosure side plates of control For operation on LZM2(-4), LN2(-4) NZM2-XSM-L
panel and circuit-breaker is defined by mounting the left 266664
bracket. Extensions cannot be used.
For operation on LZM1(-4), LN1(-4) NZM1-XSM-R
the right 266665
For operation on LZM2(-4), LN2(-4) NZM2-XSM-R
the right 266666
Red-yellow for Emergency-Stop
Lockable in 0 position on handle. Narrowest For operation on LZM1(-4), LN1(-4) NZM1-XSRM-L 1 off
minimum clearance between enclosure side plates the left 266671
of control panel and circuit-breaker is defined by For operation on LZM2(-4), LN2(-4) NZM2-XSRM-L
mounting bracket. Extensions cannot be used. the left 266672
For operation on LZM1(-4), LN1(-4) NZM1-XSRM-R
the right 266673
For operation on LZM2(-4), LN2(-4) NZM2-XSRM-R
the right 266674
Add-on plate
For fitting to the mounting bracket when using N conductor or PE conductor terminals K25, K50, K95 or K150.
LZM1(-4), LN1(-4) NZM1/2-XZB 1 off
LZM2(-4), LN2(-4) 266676
Additional terminal arrangement for side wall operator with mounting bracket
NZM1-XS(R)M-, NZM2-XS(R)M-
Additional terminals K25, K50, K95, K150 a 66
Actuation:
3 pole 4 pole
For operation on the right For operation on the left For operation on the right For operation on the left
MII MI MI MII
MI MII
Example: In mounting area MI, variation option 1 allows the K25 additional terminal to be mounted twice.
60 Ordering
Accessories
NZM...-XRAV..., ZFS..., BPF-... Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Rear drive
For direct rear connection of the switch to the side of the control panel or
control panel door. Switch actuation on rear through side plate or control
panel door.
For switch with toggle lever.
For enhanced protection against direct contact on the incomer side, IP2X
protection against contact with a finger can be ordered a 21
Degree of protection IP66, UL/CSA Type 4X
Standard, black/grey
Lockable on the LZM1, LN1 NZM1-XRAV 1 off External warning plate can be clipped on
0 position on the 107245
handle using up to LZM2, LN2 NZM2-XRAV
3 padlocks. 107247
Large U X
V Y
L1 T1 N PEN
L2 T2
LZM3(-4), LN3(-4) BPF-NZM10 10 off
W Z L3 T3 PE LZM4(-4), LN4(-4) 231363
Ordering 61
Accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM...-XDZ, NZM...-XBR, NZM...-X...
Circuit-breakers, switch-disconnectors
For use with Part no. Price Std. pack Notes
Article no. when see price
ordered separately list
Add-on handle
Enables switching when the control panel door is open
LZM1(-4), LN1(-4) NZM1/2-XDZ 1 off Push-fits on to the extension shaft
LZM2(-4), LN2(-4) 266621 100 mm free extension shaft required.
Cannot be combined with NZM...-XT...-60
LZM3(-4), LN3(-4) NZM3/4-XDZ 1 off door coupling rotary handles as well as
LZM4(-4), LN4(-4) 266622 NZM...-XT...-0.
Insulating surrounds
For toggle lever, rotary handle with rotary drive and remote operator.
Degree of protection IP40
Spacers
Enables fast and low-priced adjustment of differing frame sizes with/
without rotary handle to the same front depth
LZM1(-4), LN1(-4) NZM1/2-XAB 1 set Grid depth 17.5 mm, M4 thread
LZM2(-4), LN2(-4) 260203 Type contains 4 off spacer
Maximum component capacity:
LZM1: 4 units per fixing screw,
LZM2: 2 units per fixing screw
2 (LZM1) or 4 (LZM2) fixing screws
contained per circuit-breaker
LZM3(-4), LN3(-4) NZM3-XAB 1 set Grid depth 17.5 mm, M5 thread
LZM4(-4), LN4(-4) 260211 One set contains 4 spacers
LZM3, LZM4: 1 off per fixing screw
4 fixing screws per switch included
Clip plate
Enables snap-fit of the circuit-breaker to a DIN rail
LZM1(-4), LN1(-4) NZM1-XC35 1 off For top-hat rail 35 mm
260213
Bowden cables
For mechanical interlocking of (door coupling) rotary handles
LZM2(-4), LN2(-4) NZM2-XMVR 1 off Type contains parts for both switches.
+LZM2(-4), LN2(-4) 104543 Remote operator also required.
LZM2(-4), LN2(-4) NZM2/3-XMVR Maximum switching distance
+LZM3(-4), LN3(-4) 104544 a engineering
Cannot be combined with rotary handles,
LZM3(-4), LN3(-4) NZM3-XMVR door coupling rotary handles and early-make
+LZM3(-4), LN3(-4) 104545 auxiliary contacts.
LZM3(-4), LN3(-4) NZM3/4-XMVR
+LZM4(-4), LN4(-4) 104546
LZM4(-4), LN4(-4) NZM4-XMVR
+LZM4(-4), LN4(-4) 104547
LZM2(-4), LN2(-4) NZM2-XMVRL 1 off Type contains parts for both switches.
+LZM2(-4), LN2(-4) 104548 Remote operator also required.
LZM2(-4), LN2(-4) NZM2/3-XMVRL Maximum switching distance
+LZM3(-4), LN3(-4) 104549 a engineering
Cannot be combined with rotary handles,
LZM3(-4), LN3(-4) NZM3-XMVRL door coupling rotary handles and early-make
+LZM3(-4), LN3(-4) 104550 auxiliary contacts.
LZM3(-4), LN3(-4) NZM3/4-XMVRL
+LZM4(-4), LN4(-4) 104551
LZM4(-4), LN4(-4) NZM4-XMVRL
+LZM4(-4), LN4(-4) 104552
Ordering 63
Multi-function device adapter
http://catalog.moeller.net Moeller SK1230-1177GB NZM...-XAD..., NZM...-XKR...
Circuit-breakers, switch-disconnectors
For use with Rated current Part no. Price Std. pack Notes
Article no. when see price
ordered list
separately
Ie
A
LZM3, LN3 550 NZM3-XAD550 Connection to the system possible at top via connection
104556 on rear (+)NZM3-XK13
Mounting using clamp and screw fixing.
For use with Rated current Part no. suffix Price Part no. Price Std. pack
Article no. when ordered see price Article no. when ordered see price
with basic unit list separately list
Ie
A
Notes Part no. and part no. suffix include parts for one switch side at top or bottom (with LZM3 top only). Required with component adapter and
switch with connection on rear, see for example component adapter 104555 and 104556.
O = for fitting at the top
U = for fitting at the bottom
64 Ordering Ordering 65
Accessories Accessories
LZM2, LZM3, LZM4 Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM2, LZM3, LZM4
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
For use with Rated control voltage Part no. Price Std. pack
Article no. when ordered see price Notes
separately list
Us
V
Remote operator
For remote switching of circuit-breakers and switch-disconnectors.
ON and OFF switching and resetting by means of 2-wire or 3-wire control.
Can be synchronized.
Local switching by hand possible
Lockable in the 0 position of the remote operator with up to 3 padlocks (hasp thickness: 4 8 mm)
LZM2(-4), LN2(-4) 110 130 V 50/60 Hz NZM2-XR110-130AC 1 off
A standard auxiliary contact (HIN) for the switch position detection is supplied.
259830
When installing the NZM2-XR and NZM3-XR remote operators on 4 pole switches, an additional 4 pole NZM2-XAVPR or NZM3-XAVPR shroud is necessary.
208 240 V 50/60 Hz NZM2-XR208-240AC
259832 3-wire control
380 440 V 50/60 Hz NZM2-XR380-440AC1) L1 Terminal 70/71:
259834 (L1+)
0 I Please note during engineering:
H1
24 30 V DC NZM2-XR24-30DC Full current flows though the contact during make and break!
259836 70 71 72 RMQ series contact elements can be used for the NZM2(3,4)-XR remote operators.
110 130 V DC NZM2-XR110-130DC 75
259840 74
N
220 250 V DC NZM2-XR220-250DC (L1, L2)
259842
LZM3(-4), LN3(-4) 110 130 V 50/60 Hz NZM3-XR110-130AC
259848 2-wire control
208 240 V 50/60 Hz NZM3-XR208-240AC L1 Terminal 75:
(L1+) 0 I
259850 S Operational readiness signal when the cover is closed, and not locked.
H1
380 440 V 50/60 Hz NZM3-XR380-440AC1) AC-15: 400 V; 2 A
259852 70 71 72 DC-13: 220 V; 0.2 A
24 30 V DC NZM3-XR24-30DC 75
259854 74
N
110 130 V DC NZM3-XR110-130DC (L1, L2)
259858 Three-wire control with automatic reset to the 0 position after the switch has tripped
220 250 V DC NZM3-XR220-250DC L1
259860 (L1+)
0 I
LZM4(-4), LN4(-4) 110 130 V 50/60 Hz NZM4-XR110-130AC HIA H1
266684
70 71 72
208 240 V 50/60 Hz NZM4-XR208-240AC 75
266685 74
N
380 440 V 50/60 Hz NZM4-XR380-440AC1) (L1, L2)
266686
24 30 V DC NZM4-XR24-30DC Switching cycle:
266691 NZM2-XR
110 130 V DC NZM4-XR110-130DC 60 ms t>3s 60 ms
266693 r r r r
220 250 V DC NZM4-XR220-250DC OFF ON ON OFF OFF ON
266694
NZM3-XR
Shroud for 4th pole
80 ms t>3s 80 ms
Additional shroud for mounting the NZM2-XR... and NZM3-XR... on a 4-pole switch. r r r r
LZM2-4, LN2-4 NZM2-XAVPR 1 off OFF ON ON OFF OFF ON
266677
LZM3-4, LN3-4 NZM3-XAVPR 1 off NZM4-XR
266678 100 ms t>3s 100 ms
Clamp terminal springloaded clamp r r r r
OFF ON ON OFF OFF ON
Control circuit terminal springloaded terminals
NZM...-XR... NZM-XRC 1 off The time interval between OFF and ON is 3 seconds.
266696
On commands received during the time interval are ignored within the first 3 seconds after switch off.
Circuit-breakers, switch-disconnectors
Max. rated For use with Part no. Price Std. pack Insulated enclosure Retrofit terminals with 3-pole switches: for 4th and 5th (if Notes
uninterrupted Article no. when ordered see price description required) conductor (N, PE-conductor), with 4-pole
current separately list switches: for 5th conductor (PE conductor)
Iu
A
Insulated enclosures
With door coupling rotary handle
Complete incl. all necessary functional parts
Degree of protection IP65
not UL/CSA approved
Standard, black/grey
Lockable on the 0 position on the handle F 63 A NZM1, LN1 NZM1-XCI23-TVD 1 off CI23-150 K10/1, K25/1 Suitable for installation of circuit-breakers and switch-disconnectorsEnclosure
using up to 3 padlocks. Additionally with 271522 for separate mounting with top and bottom cable entry.
cover interlock. F 125 A NZM1(-4), LN1(-4) NZM1-XCI43-TVD CI43-150 K10/1, K25/1, K50/1, K95/1N/BR Include fixing straps for wall mounting.
271523 Short-circuit resistance at 415 V 50/60 Hz to 10 kA.
F 160 A NZM1(-4), LN1(-4) NZM1-XCI43/2-TVD CI43-200 K10/1, K25/1, K50/1, K95/1N/BR Cannot be used in combination with NZM-XR remote operator,
104645 NZM-XSV plug-in unit or NZM-XAV withdrawable unit.
F 200 A NZM2(-4), LN2(-4) NZM2-XCI43-TVD CI43-200 K10/1, K25/1, K50/1, K95/1N/BR, K150/1/BR, K240/1/BR Insulated additional terminal for 4th or 5th pole should be ordered separately.
271524
F 250 A NZM2(-4), LN2(-4) NZM2-XCI45-TVD CI45-200 K10/1, K25/1, K50/1, K95/1N/BR, K150/1/BR, K240/1/BR CI23 enclosure with flanges
280418 CI43, CI45 and CI48 feature gland plates.
F 400 A NZM3(-4), LN3(-4) NZM3-XCI48-TVD CI48-250 K95/1N/BR, K150/1/BR, K240/1/BR, K2X240/1/BR Only for switches with tunnel clamps for direct connection of cables.
271525
Red-yellow for Emergency-Stop
Lockable on the handle and on the switch F 63 A NZM1, LN1 NZM1-XCI23-TVDVR 1 off CI23-150 K10/1, K25/1
using up to 3 padlocks each. Lockable in 271527
0 position on handle. Cover interlock as F 125 A NZM1(-4), LN1(-4) NZM1-XCI43-TVDVR CI43-150 K10/1, K25/1, K50/1, K95/1N/BR
additional feature, locking facility on 271528
circuit-breaker in 0 position.
F 160 A NZM1(-4), LN1(-4) NZM1-XCI43/2-TVDVR CI43-200 K10/1, K25/1, K50/1, K95/1N/BR
104646
F 200 A NZM2(-4), LN2(-4) NZM2-XCI43-TVDVR CI43-200 K10/1, K25/1, K50/1, K95/1N/BR, K150/1/BR, K240/1/BR
271529
F 250 A NZM2(-4), LN2(-4) NZM2-XCI45-TVDVR CI45-200 K10/1, K25/1, K50/1, K95/1N/BR, K150/1/BR, K240/1/BR
279356
F 400 A NZM3(-4), LN3(-4) NZM3-XCI48-TVDVR CI48-250 K95/1N/BR, K150/1/BR, K240/1/BR, K2X240/1/BR
271530
Earth-fault release
Suitable for use in three- and single-phase systems
Pulse current sensitive according to core-balance principle
Circuit-breakers, switch-disconnectors
For use with Part no. Price Std. pack Notes
Article no. when see price
ordered with list
basic unit
Ring-type transformer
Rated operational voltage: 690 V (50/60 Hz)
Internal diameter: 20 mm PFR-W-20 1 off incl. fixing clip for DIN rail mounting
285558
Internal diameter: 30 mm PFR-W-30
285559
Circuit-breakers, switch-disconnectors
Selectivity 415 V AC
Incomin between circuit-breakers enables separate shut-down of faulty system sections.
1 g
circuit- Selectivity (discrimination) exists between incoming breaker 1 and outgoing breaker 2 if,
2 3 4 breaker only outgoing breaker 2 trips at position 2 during a short-circuit.
System sections 3 and 4 continue to operate.
Incoming circuit-breaker (S1) Incoming circuit-breaker (S1) Incoming circuit-breaker (S1)
LZM...1-A... LZM...2-A... LZM...3-AE... LZM...3-VE... LZM...4-AE... LZM...4-VE...
Circuit-breakers, switch-disconnectors
Selectivity 415 V AC
Incoming between circuit-breakers enables separate shut-down of faulty system sections.
1 circuit-breaker Selectivity (discrimination) exists between incoming breaker 1 and outgoing breaker 2 if,
only outgoing breaker 2 trips at position 2 during a short-circuit.
2 3 4 Outgoing System sections 3 and 4 continue to be operational.
circuit-breaker
Incoming circuit-breaker (S1) Incoming circuit-breaker (S1)
LZM...1-A... LZM...2-A... LZM...3-AE... LZM...3-VE... LZM...4-AE... LZM...4-VE...
Back-up protection
between LZM(N)(S) incoming circuit-breaker and LZM(E)(B)(C)(N) outgoing circuit-breaker
Incoming circuit-breaker a
LZM1 LZM2 LZM3
In up to 160 A up to 300 A up to 630 A
Icu(415 V) 25 kA 36 kA 25 kA 36 kA 50 kA
a Outgoing circuit-breaker b
Icu(415 V) In
LZME1 16 kA up to 160 A 25 36 25 36 50
LZMB1 25 kA up to 160 A 25 36 25 36 50
b LZMC1 36 kA up to 160 A 36 36 50
LZMB2 25 kA up to 300 A 25 36 25 36 50
LZMC2 36 kA up to 300 A 36 36 50
LZMC3 36 kA up to 630 A 50
LZMN3 50 kA up to 630 A 50
Where the prospective fault current at the point of The table shows which current-limiting circuit-breaker The selectivity limit is determined by the response
installation of circuit-breakers is very high, it is LZMN in combination with LZMB(C) are to be used to current of the non-delayed short-circuit release in the
conventional to use LZMN current-limiting circuit- provide protection at the network locations with high upstream incoming circuit-breaker. In many
breakers. An attractively priced alternative is to fit a short-circuit capacities. applications this is sufficient.
LZMN current-limiting circuit-breaker upstream of
LZMB(C) standard circuit-breakers, if the fault level is
too high for LZMB(C) switches.
Circuit-breakers, switch-disconnectors
Direction of blow-out
Top, front Bottom,
rear
LZM1 X
LZM21) X X
LZM3 X X
LZM4 X
1) LZM2E(B)(C) A as LZM1
Minimum clearances
between two adjacently mounted switches
Minimum clearance a in mm
c
LZM4 15 15 15 15
b a b
between switch and other parts
Minimum clearances in mm
b c d
F 690 V 1000 V F 690 V 1000 V F 690 V 1000 V
LZM1 0 60 0
LZM21) 5 5 35 35 35 35
LZM3 5 5 60 60 60 60
LZM4 15 15 100 200 0 0
1) LZM2B(C) A C= 60 mm, d = 0 mm
Dimensions
For pressing the cable lugs a press tool K22, HK60/22 or EK22
from the company Klauke is necessary with the following press inserts:
R22/95 for 95 mm2
h
d e
b
c
f
Cable lug For use with Rated cross Terminal bolt Dimensions in mm
section
mm2 o a b c d e f g h i
KS95-NZM7 LZM2 95 M8 53+2 23g0.5 18g0.2 10g1 19 8,5 25 13,5 4,4
KS120-NZM7 LZM2 120 M8 56+2 23g0.5 19.5g0.2 10g1 19 8,5 26 15 4,4
KS150-NZM7 LZM2 150 M8 61+2 23g0.5 21g0.2 10g1 19 8,5 30 16,5 4,4
NZM2-XKS185 LZM2 185 M8 65g1.5 22g1 24g0.3 9+1
0,5 19+2,5
0,5 8.5+0,05
0,1 30g2 19g0.4 7
NZM3-XKS185 LZM3, LZM4 185 M10 65 24,5 24 11,5 18 10,5 30 19 7.0g0.8
NZM3-XKS240 LZM3, LZM4 240 M10 72 31 26 11,5 19 10,5 35 21 5.0g0.8
76 Engineering
Auxiliary switches, trip-indicating auxiliary contacts
LZM1, LZM2, LZM3, LZM4 Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Front cut-out
Cut-out a Cut-out b
toggle lever rotary handle,
remote operator
Y Y
X X X
e
e
f f
c
d
+ I + I
+ + I + I +
L1L2L3 + + L1L2L3
L1L2L3 L1L2L3
HIN HIA
HIV HIV
+mI Trip
Notes If early-make contacts are required in combination with shunt or undervoltage releases,
please select the combination type in the Release section.
Engineering 77
Mechanical interlock for (door-coupling) rotary handles
http://catalog.moeller.net Moeller SK1230-1177GB LZM, NZM-XBZ-
Circuit-breakers, switch-disconnectors
Interlocking variants and combination options
A B
OFF OFF
A B ON/TRIP ON
ON ON/TRIP
A B C
OFF OFF OFF
A B C ON ON/TRIP ON
ON/TRIP ON ON/TRIP
A B C
OFF OFF OFF
ON/TRIP ON ON
A B C
ON ON/TRIP ON
ON ON ON/TRIP
A B C D
OFF OFF OFF OFF
ON/TRIP ON ON/TRIP ON
A B C D
ON ON/TRIP ON ON/TRIP
x4P x4P
= Switch clearance 3 pole
x3P x3P = Switch clearance 4 pole
x4P
3P
Ring-type transformer
Maximum rated current [A] Diameter
Power Motor/capacitor Transformer part Max. conductor
distribution no. circumference
PFR-W- (mm)
d1 d2
50 50 20 13 d2
150 100 30 20 d1 f 1.5 x d2
150 100 35 23
400 200 70 47
600 250 105 70
1200 630 140 93
1800 800 210 140
Engineering 79
Sizes 1, 2: tripping characteristics
http://catalog.moeller.net Moeller SK1230-1177GB LZM1, LZM2
Circuit-breakers, switch-disconnectors
System and line protection with LZM1
2.5 h 8000 LZM1(-4)-A...
6000
Tripping time [s]
4000
2000
1000
800
(10 min) 600
400
200
100
80
(1 min) 60
40
Tolerance tr [s]
20
10
8
6
4
1 Setting range
0.8
0.6
0.4
Ii = 6 10x In
0.2
0.1
0.08
0.06
0.04
0.02
0.01
0.008
0.006
0.004
0.002
0.001
1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100
x Ir
System and line protection with LZM2 Systems, cable, selectivity and generator protection with LZM2
2.5 h 8000 2.5 h 8000 LZM2(-4)-VE...
LZM2(-4)-A...
6000 6000
Characteristics for Ir = 1,0 x In
Tripping time [s]
4000 4000
2000 2000
1000 1000
800 800
(10 min) 600 (10 min) 600
400 400
200 200
100 100
80 80
(1 min) 60 (1 min) 60
40 40
Tolerance tr [s]
tr [s]
20 20
20 17
14
10 10 10
8 8 8
6 6 6
4 4 4
2 2 2
tsd [ms]
1 Setting range 1 1000
0.8 0.8 750
0.6 0.6 500
0.4 0.4
300
Ii = 6 10x In 200
0.2 0.2
100
0.1 0.1
0.08 60
0.08
0.06 0.06 20
0.04 0.04 Isd = 2 3 4 5 6 7 8 9 10 x Ir
0
0.02 0.02 Ii = 12 x In
0.01 0.01
0.008 0.008
0.006 0.006
0.004 0.004
0.002 0.002
0.001 0.001
1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100 1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100
x Ir x Ir
80 Engineering
Size 3: tripping characteristics
LZM3 Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
System and line protection with LZM3 Systems, cable, selectivity and generator protection with LZM3
2.5 h 8000 2.5 h 8000 LZM3(-4)-VE...
LZM3(-4)-AE...
6000 6000
Characteristics for Ir = 1,0 x In 4000 Characteristics for Ir = 1,0 x In
2000 2000
1000 1000
800 800
(10 min) 600 (10 min) 600
400 400
200 200
100 100
80 80
(1 min) 60 (1 min) 60
40 40
tr [s]
20 20
20 17
14
10 10 10
8 8 8
6 6 6
4 4 4
2 2 2
tsd [ms]
1 1 1000
0.8 0.8 750
0.6 0.6 500 without I2t = constant function
0.4 0.4 300
Ii = 2 2.5 3 3.5 4 5 6 7 8 x In 630 A 200
0.2 0.2 Isd = 1.5 2 2.5 3 3.5 4 5 6 7 x Ir 630 A
100
0.1 0.1
0.08 60
0.08
0.06 0.06 20
0.04 0.04
0
0.02 Isd = 2 3 4 5 6 7 8 9 10 x Ir 400 A
0.02
0.01 0.01
0.008 0.008
0.006 0.006 Ii = 2 2.5 3 3.5 4 5 6 7 8 x In 630 A
0.004 0.004
Ii = 2 3 4 5 6 7 8 9 11x In 400 A
0.002 0.002
0.001 0.001
1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100 1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100
x Ir x Ir
2000
1000
800
(10 min) 600
400
200
100
80
(1 min) 60
40
tr [s]
20 20
17
10 14
10
8 8
6 6
4 4
2 2
1
0.8
0.6
00 I2t = constant
0.4 10
......
20..
0.2 =
s]
[m
0.1 t sd
0.08
0.06 Isd = 1.5 2 2.5 3 3.54 5 6 7 x Ir 630 A
0.04 Isd = 2 3 4 5 6 7 8 910 x Ir 400 A
0.02
0.01
0.008
0.006
Ii = 2 2.5 3 3.5 4 5 6 7 8 x In 630 A
0.004
Ii = 2 3 4 5 6 7 8 9 11 x In 400 A
0.002
0.001
1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100
x Ir
Engineering 81
Size 4: tripping characteristics
http://catalog.moeller.net Moeller SK1230-1177GB LZM4
Circuit-breakers, switch-disconnectors
Systems, cable, selectivity and generator protection with LZM4 System and line protection with LZM4
2.5 h 8000 LZM4(-4)-VE... 2.5 h 8000 LZM4(-4)-AE...
6000 6000
4000 Characteristics for Ir = 1,0 x In 4000 Characteristics for Ir = 1,0 x In
Tripping time [s]
1000 1000
800 800
(10 min) 600 (10 min) 600
400 400
200 200
100 100
80 80
(1 min) 60 (1 min) 60
40 40
tr [s]
20 20 20
17
14
10 10 10
8 8 8
6 6 6
4 4 4
2 2 2
1 1
0.8 0.8
0.6 0.6
00 I2t = constant
0.4 10 0.4
....
......
0.2 20.. 0.2
s] = Ii = 2 3 4 5 6 7 8 10 12x In
0.1 d
[m 0.1
ts
0.08 0.08
0.06 0.06
0.04 0.04
Isd = 2 3 4 5 6 7 8 9 10 x Ir
0.02 0.02
0.01 Ii = 2 3 4 5 6 7 8 10 12 x In 0.01
0.008 0.008
0.006 0.006
0.004 0.004
0.002 0.002
0.001 0.001
1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100 1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100
x Ir x Ir
2000
1000
800
(10 min) 600
400
200
100
80
(1 min) 60
40
tr [s]
20 20
17
14
10 10
8 8
6 6
4 4
2 2
tsd [ms]
1 1000
0.8 750
0.6 500
without I2t = constant function
0.4 300
200
0.2
100
0.1 60
0.08 20
0.06 0
0.04
Isd = 2 3 4 5 6 7 8 9 10 x Ir
0.02
0.01 Ii = 2 3 4 5 6 7 8 10 12 x In
0.008
0.006
0.004
0.002
0.001
1 2 3 4 5 6 7 8 910 15 20 30 40 50 60 70 80 100
x Ir
82 Engineering
Size 1, 2, 3: let-through characteristics
LZM1, LZM2, LZM3 Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Let-through current xD
D 200 LZMB1(-4)-A(S)15...160 D 200 LZMC1-A20...160
[kA] [kA]
100 100
80 80
60 60
c
c
Ic
Ic
2x
2x
40 40
20 20
415 V
415 V+440 V 440 V
10 10
525 V
8 8
6 6
690 V
4 4
3 3
1 1
1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150 1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150
Icc rms [kA] Icc rms [kA]
100 100
80 80
60 60
c
c
Ic
Ic
2x
2x
40 40
20 20
10 10
8 8
6 6
4 4
3 3
1 1
1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150 1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150
Icc rms [kA] Icc rms [kA]
100 100
80 80
60 60
40 40
c
c
Ic
Ic
2x
2x
20 20
10 10
8 8
6 6
4 4
3 3
1 1
1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150 1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150
Icc rms [kA] Icc rms [kA]
Engineering 83
Sizes 1, 2, 3: let-through characteristics
http://catalog.moeller.net Moeller SK1230-1177GB LZM1, LZM2, LZM3
Circuit-breakers, switch-disconnectors
Let-through energy J
7 7
Zy 10 Zy 10
8 LZMB1(-4)-A(S)15...160 8 LZMC1-A20...160
[A2 s] 6 [A2 s] 6
4 4
a a
2 2
106 106
8 8
6 6 415 V
4 4
415 V
2 2
105 105
8 8
6 6
4 4
2 2
104 104
1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150 1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150
Icc rms [kA] Icc rms [kA]
7 7
Zy 10 Zy 10
8 LZMB2(-4)-A(S)160...250 8 LZMC2-A160...250
[A2 s] 6 [A2 s] 6
4 4
a a
2 2
106 106
8 8
6 6
4 4
2 2
105 105
8 8
6 6
4 4
2 2
104 104
1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150 1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150
Icc rms [kA] Icc rms [kA]
7
Zy 10
8 LZMN3(-4)-AE(VE)400...630
[A2 s] 6
a
2
106
8
6
4
105
8
6
4
104
1 2 3 4 5 6 8 10 15 20 30 40 5060 80100 150
Icc rms [kA]
a 1 half-cycle
84 Engineering
Size 2: residual-current release frequency response
NZM2-4-XFIA Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Frequency response
NZM2-4-XFIA30 NZM2-4-XFIA
30 mA 100 mA
IDn 10000 IDn 10000
[mA] [mA]
1000 1000
100 100
10 10
1 10 100 1000 10000 100000 1 10 100 1000 10000 100000
f [Hz] f [Hz]
NZM2-4-XFIA
300 mA 1000 mA
IDn 10000 IDn 100000
[mA] [mA]
1000 10000
100 1000
10 100
1 10 100 1000 10000 100000 1 10 100 1000 10000 100000
f [Hz] f [Hz]
Notes 85
Circuit-breakers, switch-disconnectors
86 Technical data Technical data 87
Circuit-breakers Circuit-breakers
LZM1-I, LZM2-I, LZM3-I, LZM4-I Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB LZM1-I, LZM2-I, LZM3-I, LZM4-I
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
Rated uninterrupted current Rated uninterrupted current Rated uninterrupted current Rated uninterrupted current
max. 160 A max. 300 A max. 630 A max. 1600 A
LZME1 LZMB1 LZMC1 LZMB2 LZMC2 LZMC3 LZMN3 LZMN4
General
Standards IEC/EN 60947 IEC/EN 60947
Protection against direct contact Finger and back of hand proof to VDE 0106 Part 100 Finger and back of hand proof to VDE 0106 Part 100
Climatic proofing Damp heat, constant, according to IEC 60068-2-78 Damp heat, constant, according to IEC 60068-2-78
Damp heat, cyclical to IEC 60068-2-30 Damp heat, cyclical to IEC 60068-2-30
Ambient temperature
Storage C 25+70 25+70
Operation C 25+70 25+70
Mechanical shock resistance (IEC/EN 60068-2-27) 20 (half-sinusoidal shock 20 ms) 20 (half-sinusoidal shock 20 ms)
Safe isolation to VDE 0106 Part 101 and Part 101/A1
Between auxiliary contacts and main contacts V AC 500 500
between the auxiliary contacts V AC 300 300
Mounting position LZM1, LN1: Vertical and 90 LZM2, LN2: Vertical and 90 in all directions
With residual-current release, With plug-in adapter With withdrawable unit, With withdrawable unit,
LZM1, LN1: Vertical and 90 in all directions LZM2, LN2: vertical and 90 right/left LZM3, LN3: vertical, 90 left, LZM4, LN4: vertical
with residual current release, with remote control, with remote control,
LZM2: vertical and 90 to all directions LZM3, LN3: vertical and 90 to all directions LZM4, LN4: vertical and 90 to all directions
Direction of incoming supply As required As required
Degree of protection
Device In the operating controls area: IP20 (basic degree of protection) In the operating controls area: IP20 (basic degree of protection)
Enclosures With insulating surround: IP40, with door coupling rotary handle: IP66 With insulating surround: IP40, with door coupling rotary handle: IP66
Circuit-breakers, switch-disconnectors
Rated uninterrupted current max. 160 A Rated uninterrupted current max. 300 A Rated uninterrupted current max. 630 A Rated uninterrupted current max. 1600 A
LZME1 LZMB1 LZMC1 LZMB2 LZMC2 LZMC3 LZMN3 LZMN4
Switching capacity
Rated short-circuit making capacity
240 V Icm kA 50 63 121 63 121 121 187 105
400/415 V Icm kA 36 53 76 53 76 76 105 105
Rated short-circuit breaking capacity Icn
Icu to IEC/EN 60947 operating sequence 240 V 50/60 Hz Icu kA 25 30 55 30 55 55 85 50
O-t-CO 400/415 V 50/60 Hz Icu kA 18 25 36 25 36 36 50 50
Ics to IEC/EN 60947 operating sequence 240 V 50/60 Hz Icu kA 12.5 15 27.5 15 27.5 27.5 42.5 25
O-t-CO-t-CO 400/415 V 50/60 Hz Icu kA 9 12.5 18 12.5 18 18 25 25
Maximum low-voltage h.b.c. fuse1) A gG/gL LZM.1-20100: 200 355 355 LZM.3-250, 400: 400
LZM.1-125, 160: 315 LZM.3-500, 630: 630
Utilization category to IEC/EN 60947-2 A A A A A A A B
Rated short-time withstand current
t = 0.3 s Icw kA 1.9 3.3 3.3 19.2
t=1s Icw kA 1.9 3.3 3.3 19.2
Rated making and breaking capacity
Rated operational current AC-1 400/415 V 50/60 Hz Ie A 160 160 160 300 300 630 630 1600
Lifespan, mechanical Operations 10000 10000 10000 10000 10000 7500 7500 5000
Maximum operating frequency Ops/h 30 30 30 30 30 30 30 30
Lifespan, electrical
AC-1 400/415 V 50/60 Hz Operations 5000 5000 5000 5000 5000 2500 2500 1500
Current heat loss per pole at Iu2) W 16.7 16.7 16.7 19 19 40 40 97
Total opening delay at short-circuit ms < 10 < 10 < 10 < 10 < 10 < 10 < 10 < 25
Notes 1) Maximum back-up fuse, if the expected short-circuit currents at the installation location exceed the switching capacity of the circuit-breaker.
2) For current heat loss per pole the specification refers to the maximum nominal current of the frame size.
90 Technical data
Switch-disconnectors
LN Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Switch-disconnectors
Rated impulse withstand voltage Uimp
Main contacts V 6000 8000 8000 8000
Auxiliary contacts V 6000 6000 6000 6000
Rated operational voltage Ue V AC 690 690 690 690
Rated uninterrupted current max.
IEC/EN 60947-2 annex L Iu A 160 250 630 1600
Technical data, divergent from the Iu A 125 160 550 1200
products for the IEC market UL489,
CSA 22.2 No. 5.1
Overvoltage category/pollution degree III/3 III/3 III/3 III/3
Rated insulation voltage Ui V AC 690 690 1000 1000
For use in IT electrical power networks V 690 690 690 525
Switching capacity
Rated short-circuit making capacity Icm kA 2.8 5.5 25 53
Rated short-time withstand current
t = 0.3 s Icw kA 2 3.51) 12 25
t=1s Icw kA 2 3.51) 12 25
Rated conditional short-circuit current
With back-up fuse A gG/gL PN1(N1)63125: 125 PN2(N2)-160250: PN3(N3)-400630: N4-6301600:
PN1(N1)-160: 160 250 630 2 x 800
400 415 V kA 100 100 100 100
With downstream fuse A gG/gL LN1-63125: 125 LN2-160250: LN3-400630: LN4-6301600:
LN1-160: 160 250 630 2 x 800
400 415 V kA 100 100 100 100
Rated making and breaking capacity
Rated operational current, AC-22/23A
415 V Ie A 160 250 630 1600
Lifespan, mechanical Opera 10000 10000 7500 5000
tions
Maximum operating frequency Ops./h 120 120 60 60
Lifespan, electrical to IEC/EN 60947-4-1
section B
AC-1
400/415 V Opera 5000 5000 2500 1500
tions
AC-3
400/415 V Opera 3000 3000 1000 750
tions
Current heat loss per pole at Iu2) W 12.7 16 40 97
Notes 1) The rated short time withstand current for PN2/N2 in conjunction with residual-current release NZM2-4-XFI... Icw = 1.5 kA
2) The current heat loss per pole ratings refer to the maximum current rating of the frame size.
Technical data 91
Temperature influence
http://catalog.moeller.net Moeller SK1230-1177GB
Circuit-breakers, switch-disconnectors
Response values of the overload release at temperatures deviating from the
reference temperatures
Device Type Release Temperature compensation coefficient
type
20 C 30 C 40 C 50 C 60 C 65 C 70 C
Thermomagnetic release (TM)
System protection Protection of systems (reference temperature 40 C)
LZM...1(-4)-A1580 TM 1.14 1.07 1 0.93 0.86 0.83 0.79
LZM...1(-4)-A90125 TM 1.14 1.07 1 0.93 0.86 0.83 0.79
LZM...1(-4)-A160 TM 1.08 1.04 1 0.96 0.92 0.90 0.88
LZM...2(-4)-A125200 TM 1.04 1.02 1 0.98 0.96 0.95 0.94
LZM...2(-4)-A250/300 TM 1.04 1.02 1 0.98 0.96 0.95 0.94
LZM...2(-4)-A125200 + XSV TM with XSV 1.04 1.02 1 0.98 0.96 0.95 0.94
LZM...2(-4)-A250/300 + XSV TM with XSV 1.04 1.02 1 0.98 0.96 0.95 0.94
Notes With temperatures which deviate from the reference temperature, a slight change of the overload protection properties occurs. In order to determine the
release time using the tripping characteristics the temperature compensation coefficient in accordance with the table must be considered.
Example: An LZM1-A100 is calibrated for a reference temperature of 40 C.
What happens when it is operated at an ambient temperature of 60 C?
At 60 C, the temperature compensation coefficient of 0.86 results in a reduced operating current of Ir = 100 A x 0.86 = 86 A. In other words
at an ambient temperature of 60 C the LZM1-A100 trips as if it were set to 86 A.
Notes The derating coefficient must be considered in accordance with the following table in order to determine the maximum permissible current loading at
different ambient temperatures.
Example: An LZM2-A250 should be operated at an ambient temperature of 65 C.
How high is the permissible rated operational current Ie?
At 65 C the derating coefficient is 0.85, this means Ie = 250 A x 0.85 = 212.5 A.
The LZM2-A250 may be operated at an ambient temperature of 65 C with a maximum Ie = 212.5 A.
Notes The derating coefficient must be considered in accordance with the following table in order to determine the maximum permissible current loading at
different ambient temperatures.
Example: An LZM3-VE630 should be operated at an ambient temperature of 65 C.
How high is the permissible rated operational current Ie?
At 65 C the derating coefficient is 0.85, this means Ie = 630 A x 0.85 = 535.5 A.
The LZM3-VE630 may be operated at an ambient temperature of 65 C with a maximum Ie = 535.5 A.
Technical data 93
Effective power loss
http://catalog.moeller.net Moeller SK1230-1177GB LZM1, LZM2
Circuit-breakers, switch-disconnectors
LZM up to 250 A with thermomagnetic release (3- and 4-pole)
Fixed mounting Fixed mounting
LZM1- LZM2-
A... A...
In [A] P R P R
[W] [Ohm] [W] [Ohm]
20 9.8 8180 5.1 4250
25 8.8 4680 8 4250
26
30
32 9.1 3030 10 3140
33
35
40 11 2220 13 2800
45
50 13.5 1760 18 2270
60
63 14 1190 20 1700
70
80 15.5 850 22 1070
90
100 24 730 28 855
110
125 38 570 29 589
150
160 50 460 40 427
175
200 48 332
225
250 57 310
Note: The values stated in the table apply for 3- and 4-pole fixed mounted devices with an equal load distribution.
On 4-pole devices the current in the N-conductor is equal to zero.
The total resistive load is the measured value for a 3-pole or a 4-pole switch.
The total heat dissipation is the value measured at In, 50/60Hz for a 3-pole or 4-pole switch.
The heat dissipation can be calculated with the formula: P = 3 x R x I
Circuit-breakers, switch-disconnectors
LZM1 In1) LZM2 In1) LZM3 In1) LZM4 In1)
160 A A 300 A A 630 A A 1600 A A
Terminal capacities
Standard equipment Box terminal Screw terminal Screw terminal Screw terminal
Accessories Screw connection Box terminal Box terminal Tunnel terminal
Tunnel terminal Tunnel terminal Tunnel terminal Connection on rear
Connection on rear Connection on rear Connection on rear Strip terminal
Rated power of coil
Box terminal Solid mm2 1 x (10 16) 160 1 x (4 16) 250 2 x 16 500
2 x (6 16) 2 x (4 16)
Stranded mm2 1 x (25 70) 1 x (25 185) 250 1 x (35 240)
2 x 25 2 x (25 70) 2 x (25 120)
Tunnel terminal Solid mm2 1 x 16 160 1 x 16 250
Stranded Single hole mm2 1 x (25 95) 1 x (25 185) 1 x (25 185) 350
Double hole fitting mm2 1 x (50 240) 630
2 x (50 240) 2 x 185
4-hole mm2 4 x (50 240) 1400
Bolt terminal and rear-side connection
Direct on the switch Solid mm2 1 x (10 16) 160 1 x (4 16) 250 1 x 16 630
2 x (6 16) 2 x (4 16) 2 x 16 2 x 185
Stranded mm2 1 x (25 70)3) 1 x (25 185) 1 x (25 240) 1 x (120 185) 1250
2 x 25 2 x (25 70) 2 x (25 240) 4 x (50 185)
Module plate Single hole min. mm2 1 x (120 300) 1000
max. mm2 2 x (95 300)
Module plate Double hole min. mm2 2 x (95 185) 1400
max. mm2 4 x (35 185)
Connection width extension mm2 2 x 300 630 4 x 300 1600
2 x 185 6 x (95 240) 4 x 240
Al conductors, Al cable
Tunnel terminal Solid mm2 1 x 16 160 1 x 16 250 1 x 16 350
Stranded Single hole mm2 1 x (25 95) 1 x (25 185)2) 1 x (25 185)2)
Double hole fitting mm2 1 x (50 240) 630
2 x (50 240)
4-hole mm2 4 x (50 240) 1400
Bolt terminal and rear-side connection
Direct on the switch Solid mm2 1 x (10 16) 160 1 x (10 16) 250 1 x 16 400
2 x (10 16) 2 x (10 16) 2 x (10 16)
Stranded mm2 1 x (25 35) 1 x (25 50) 1 x (25 120)
2 x (25 35) 2 x (25 50) 2 x (25 120)
Module plate Single hole min. mm2 1 x (185 240) pleaes inquire
Single hole max. mm2 2 x (70 185) pleaes inquire
Module plate Double hole mm2 4 x 50
Connection width extension mm2 2 x 240 pleaes inquire
6 x (70 240)
Cu strip (number of segments x width x segment thickness)
Box terminal min. mm 2 x 9 x 0.8 160 2 x 9 x 0.8 250 6 x 16 x 0.8 630
max. mm 9 x 9 x 0.8 10 x 16 x 0.8 10 x 24 x 1.0
+ 5 x 24 x 1.0
(2 x) 8 x 24 x 1.0
Flat conductor terminal min. mm 6 x 16 x 0.8 1100
max. mm (2 x) 10 x 32 x 1.0
Module plate Single hole mm (2 x) 10 x 50 x 1.0 1250
(2 x ) 10 x 40 x 1.0
Bolt terminal and rear-side connection
Flat copper strip, with holes min. mm 2 x 16 x 0.8 250 6 x 16 x 0.8 630 (2 x) 10 x 50 x 1.0 1600
Flat copper strip, with holes max. mm 10 x 16 x 0.8 10 x 32 x 1.0 + 5 (2 x) 10 x 50 x 1.0
x 32 x 1.0
Connection width extension mm2 (2 x) 10 x 50 x 1.0 (2 x) 10 x 80 x 1.0 1600
2 x (10 x 50 x 1.0)
Copper busbar (width x thickness)
Bolt terminal and rear-side connection
Screw connection M6 M8 M10 M10
Direct on the switch min. mm 12 x 5 160 16 x 5 250 20 x 5 630 25 x 5 1600
max. mm 16 x 5 20 x 5 30 x 10 2 x (50 x 10) 2000
+30 x 5 2 x (80x 10)
Module plate Single hole min. mm 25 x 5 1250
max. mm 2 x (50 x 10) 2 x (40 x 10)
Module plate Double hole mm 2 x (50 x 10) 1500
Connection width extension min. mm 630 60 x 10 1600
max. mm 2 x (10 x 50) 10 x 40 2 x (80 x 10) 2 x (50 x 10)
Notes 1) The rated currents In have been determined conform to IEC/EN 60947 (switchgear standard) and generally relate
to the max. defined cross-sections and are intended for the purpose of orientation. The engineering standards which apply in
each case must be observed.
2) depending on the cable manufacturer up to 240 mm2 can be connected.
3) depending on the cable manufacturer up to 95 mm2 can be connected.
96 Technical data
Auxiliary contacts
M22-K, XHI(V) Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Auxiliary contacts
Rated operational voltage
AC Ue V AC 500 500 500
DC Ue V DC 220 220 220
Conventional thermal current Ith = Ie A 4 4 4
Rated operational current
AC15 115 V Ie A 4 4 4
230 V Ie A 4 4 4
400 V Ie A 2 2 2
500 V Ie A 1 1 1
DC-13 24 V Ie A 3 3 3
42 V Ie A 1.7 1.5
60 V Ie A 1.2 0.8 1.2
110 V Ie A 0.8 0.5 0.5
220 V Ie A 0.3 0.2 0.2
Short-circuit protection
max. fuse A gG/gL 10 10 10
Max. miniature circuit-breaker A PKZM0-10/FAZ-B6 FAZ-B6 FAZ-B6
Early-make time compared to the main contacts ms LZM1, LN1: approx. 20
during switch on and off (switching times with LZM2, LN2: approx. 20
manual operation) LZM3, LN3: approx. 20
LZM4, LN4: approx. 90
With LZM4/N4 the HIV does
not feature early break.
Terminal capacities
Solid or flexible conductor with ferrule mm2 1 x (0.75 2.5) 1 x (0.75 2.5) 1 x (0.75 2.5)
2 x (0.75 2.5) 2 x (0.75 2.5) 2 x (0.75 2.5)
AWG 1 x (18 14) 1 x (18 14) 1 x (18 14)
2 x (18 14) 2 x (18 14) 2 x (18 14)
Technical data 97
Equipping with auxiliary contacts, time differences
http://catalog.moeller.net Moeller SK1230-1177GB LZM
Circuit-breakers, switch-disconnectors
Maximum equipment and position of the internal accessories
c b a
-XHIV(2S) HIA HIN Contacts per slot with
or -XA HIA and HIN
or -XU
Main contact
LZM2 202) 3.5 6.5 Not 2.5 4.5 202) 3 4.5 Not 3 4
permissible permissible
LZM3 202) 4 8 Not 2 4 202) 3.5 8 Not 3 6.5
permissible permissible
LZM4 902) 7 11 Not on request on request 01)2) 12 15 Not on request on request
permissible permissible
Notes 1) With LZM4/N4 the HIV does not feature early break.
2) Minimum value, as it is dependent on the switching speed
98 Technical data
Undervoltage releases, shunt releases
NZM-XU, NZM-XA Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
NZM1(2/3)-XU... NZM4-XU
Undervoltage release
Rated control voltage
Alternating voltage at 50/60 Hz Us V AC 24600 24600
DC Us V DC 12250 12250
Operating range
Drop-out voltage x Us 0.35 0.7 0.35 0.7
Pick-up voltage x Us 0.85 1.1 0.85 1.1
Power consumption
AC
Pick-up AC VA 1.5 3.6
Sealing AC VA 1.5 3.6
DC
Pick-up DC W 0.8 2.5
Sealing DC W 0.8 2.5
Max. opening delay ms 19 23
(response time until the main circuits open)
Minimum command time ms 10 15 10 15
Terminal capacities
Solid or flexible conductor with ferrule mm2 1 x (0.75 2.5) 1 x (0.75 2.5)
2 x (0.75 2.5) 2 x (0.75 2.5)
AWG 1 x (18 14) 1 x (18 14)
2 x (18 14) 2 x (18 14)
UVU-NZM
Terminal capacities
Solid or flexible conductor with ferrule mm2 1 x (0.5 2.5)
2 x (0.5 1.5)
Shunt release
Rated control voltage
AC Us V AC 12440 12440 230 230
DC Us V DC 12440 12440
Frequency range Hz 0 400 0 400 50/60 50/60
Operating range
AC x Us 0.71.1 0.71.1 0.11.1 0.11.1
DC x Us 0.71.1 0.71.1
Power consumption
Pick-up AC/DC VA/W 2.5 2.5
Sealing AC/DC VA/W 2.5 2.5
Maximum current consumption at 110% Us (230 V 50 Hz) A 0.5 1
Max. opening delay (response time until the main circuits ms 20 22 20 22
open)
Duty factor ms L L 1000 ms 1000 ms
Minimum command time ms 10 15 10 15 10 15 10 15
Terminal capacities
Solid or flexible conductor with ferrule mm2 1 x (0.75 2.5) 1 x (0.75 2.5) 1 x (0.75 2.5) 1 x (0.75 2.5)
2 x (0.75 2.5) 2 x (0.75 2.5) 2 x (0.75 2.5) 2 x (0.75 2.5)
AWG 1 x (18 14) 1 x (18 14) 1 x (18 14) 1 x (18 14)
2 x (18 14) 2 x (18 14) 2 x (18 14) 2 x (18 14)
Technical data 99
Remote operator, capacitor units
http://catalog.moeller.net Moeller SK1230-1177GB NZM-XCM, NZM-XR
Circuit-breakers, switch-disconnectors
NZM-XCM
Remote operator
Rated control voltage
AC Us V AC 110440 110440 110440
DC Us V DC 24250 24250 24250
Operating range
AC Us 0.851.1 0.851.1 0.851.1
DC Us 0.851.1 0.851.1 0.851.1
Motor rating
AC 110 130 V AC VA 350 350 350
208 240 V AC VA 350 350 350
380 440 V AC VA 350 350 350
DC 24 30 V DC W 250 250 250
110 130 V DC W 250 250 250
220 250 V DC W 250 250 250
Rated power of coil
AC 110 130 V AC VA 270 270 270
208 240 V AC VA 270 270 270
380 V 440 V AC VA 270 270 270
DC 24 30 V DC W 210 210 210
100 130 V DC W 210 210 210
220 250 V DC W 210 210 210
Total make time ms 60 80 100
Total opening delay ms 300 1000 3000
Minimum signal duration
with switch on ms 30 30 30
with switch off ms 150 250 500
Lifespan, mechanical Operations 20000 15000 10000
Maximum operating frequency Ops./h 120 60 20
Terminal capacities
Solid or flexible conductor with ferrule mm2 0.75 2.5 0.75 2.5 0.75 2.5
AWG 18 14 18 14 18 14
100 Technical data
Residual-current relay
PFR- Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Electrical
Standards IEC/EN 60947-2, IEC 755, IEC 1008, IEC 1009
Sensitivity Pulse current sensitive, type A
Rated control voltage Us V AC 230 g20 % (50/60 Hz)
Motor rating Pe W 3 3 3
Rated fault currents IDn mA 0.03 0.3 0.03, 0.1, 0.3, 0.5, 1, 3, 5
Delay time tv s 0.02 (non-delayed) 0.02 (non-delayed) 0.02, 0.1, 0.3, 0.5, 1, 3, 5
Relay contacts 1 integrated changeover 1 integrated changeover 1 integrated changeover
contact contact contact
Rated voltage of the relay contact V AC/DC 250/100 250/100 250/100
Rated current of the relay contact A 6 6 6
Fault current warning Hz 0.5 = 25% 50% IDn
1 = 50% 75% IDn
2 = 75% 100% IDn
Mechanical
Standard front dimension mm 45 45 45
Device height mm 85 85 85
Device width mm 45 45 45
Mounting Snap fixing, top-hat rail DIN 46277, IEC/EN 60715
Terminals top and bottom Box terminals
Terminal protection Finger/back-of-hand proof to BGV A2, VDE 106 part 100
Terminal capacities mm2 2 x 0.75 2.5 solid, 2 x 0.75 1.5 flexible/with ferrules
Sealability yes
Notes 101
Circuit-breakers, switch-disconnectors
102 Technical Data Technical Data 103
Residual-current releases Residual-current releases
NZM-XFI Moeller SK1230-1177GB http://catalog.moeller.net http://catalog.moeller.net Moeller SK1230-1177GB NZM-XFI
Circuit-breakers, switch-disconnectors
Circuit-breakers, switch-disconnectors
NZM1(-4)-XFI30R NZM1(-4)-XFI300R NZM1(-4)-XFIR NZM1(-4)-XFI30U NZM1(-4)-XFI300U NZM1(-4)-XFIU +NZM2-4-XFI30 +NZM2-4-XFI +NZM2-4-XFIA30 +NZM2-4-XFIA
Electrical
Standards IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2 IEC/EN 60947-2
Sensitivity Pulse current sensitive according to core-balance principle Pulse current sensitive according to core-balance Pulse current sensitive Pulse current sensitive Sensitive to AC/DC (type Sensitive to AC/DC (type
principle according to core- according to core- B) B)
balance principle balance principle
Min. operating voltage
or detection of fault currents type A/ 80 V (dependent on 80 V (dependent on 80 V (dependent on 80 V (dependent on 80 V (dependent on 80 V (dependent on independent of mains independent of mains 0 V independent of 0 V independent of
AC mains voltage) mains voltage) mains voltage) mains voltage) mains voltage) mains voltage) voltage voltage mains voltage mains voltage
or detection of fault currents type B 50 V (dependent on 50 V (dependent on
mains power) mains voltage)
Suitability for the application In three- and single-phase systems In single-phase In single-phase In three- and single-phase systems
Rated operational voltage Ue V AC 200415 (3~) 200415 (3~) 200415 (3~) 200415 (3~) 200415 (3~) 200415 (3~) 280690 280690 50400 (3~) 50400 (3~)
Rated frequency f Hz 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60
Number of poles 3/4 3/4 3/4 3/4 3/4 3/4 4 4 4-pole 4-pole
Rated current range In A 15125 15125 15125 15100 15100 15100 15250 15250 15250 15250
Rated fault currents IDn A 0.03 0.3 0.030.10.3 0.03 0.3 0.030.10.3 0.03 0.10.313 0.03 0.10.31
0.513 0.513
Detection range of the fault current 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz with AC voltage: 0 100 with AC voltage: 0 100
kHz kHz
with pulsed DC voltage: with pulsed DC voltage:
50 Hz 50 Hz
Rated ultimate short-circuit making IDm A = ICU = ICU = ICU = ICU = ICU = ICU = ICU = ICU = ICU = ICU
capacity and -rated ultimate short-circuit
breaking capacity
Fault current warning f 0.3 x IDn f 0.3 x IDn f 0.3 x IDn f 0.3 x IDn f 0.3 x IDn f 0.3 x IDn
Mechanical shock resistance (IEC 60068-2-27) 20 (half-sinusoidal shock 20 ms) 20 (half-sinusoidal shock 20 ms)
Lifespan, mechanical (50 % with fault Operations 20000 20000 20000 20000 20000 20000 f 2000 f 2000 f 2000 f 2000
current)
Mechanical
Standard front dimension mm 45 45 45 45 45 45 96 96 96 96
Mounting on the right side sidewise on the right Bottom Bottom Bottom Bottom Bottom Bottom Bottom Bottom
Mounting position Vertical and 90 in all directions Vertical and 90 in all directions
Supply LZM1 from above LZM1 from above LZM1 from above LZM1 from above LZM1 from above LZM1 from above As required As required Bottom Bottom
Degree of protection IP20 in the operating component area IP20 in the operating component area
Ambient temperature C 5+40 5+40 5+40 5+40 5+40 5+40 25+70 25+70 25+70 25+70
Sealability yes, setting buttons yes, setting buttons yes, setting buttons yes, setting buttons
Terminal capacity
Flexible without ferrule mm2 such as LZM1 standard terminal such as LZM1 standard terminal with LZM2 standard connection
flexible with ferrules mm2 such as LZM1 standard terminal such as LZM1 standard terminal with LZM2 standard connection
104 Dimensions
Size 1: basic units
LZM1, LN1 Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Circuit-breaker 84.5
3 pole 68
LZME1 NZM...1-...-(C)NA
LZMB1 a
30 21
f 60
10.2
LZMC1 57
9.5
LN1
16 5
41.5
64
04
R1
112
126
145
F
45
90
63
162
SW4 M4 x 50/10
30 44.6
90
Circuit-breaker 84.5
4 pole 68
LZME1-4
LZMB1-4 a
60 21
f 60
9.5
LZMC1-4
LN1-4
16
89
5
41.5
64
04
R1
112
126
145
N
45
63
SW4 M4 x 50
30 44.6
120
Covers 21
NZM1(-4)-XKSA 16 4
Screw connection
NZM1(-4)-XKS IP2X
NZM1(-4)-XIPA
Screw connection
64
296
158
80
90 a 59
120 b
a 3 pole
b 4 pole
Dimensions 105
Size 1: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM1-XK, NZM1XIPK, NZM-XSTK
Circuit-breakers, switch-disconnectors
Tunnel terminal
NZM1(-4)-XKA
20 20 a 3 pole
b 4 pole
SW 5
48
SW 4 M6 x 14
32
64
90 a
120 b
Connection on rear
NZM1(4)-XKR
30 30 30
30 15
SW 4 M6 x 14 o 22
64
63
102
126
128
10 10 50
18
o 6.6 M4
30
90 25
120
30
15
M6 x 20
o 22
6
63
126
128
M4
15
76
64
89
90 a
90 a
120 b
120 b
a 3 pole
b 4 pole
106 Dimensions
Size 1: accessories
NZM1-XDV, NZM1-XTVD Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Rotary drive
Rotary handle on circuit-breaker
NZM1-XDV NZM1-XDTV
NZM1-XDVR
a
80.3
F 43
36
54
45
45
90
120
d
b
d=48
b f 34
a Up to 3 padlocks
ZFS...-NZM7
o8
23
40
85
71
o
R4
6
71
85
25
a
35
d
b
d=48
b f 34
a Up to 3 padlocks
Dimensions 107
Size 1: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM1-XTVD
Circuit-breakers, switch-disconnectors
Door coupling rotary handle with extension shaft
NZM1-XTVD(V)(R)
NZM1/2-XV4(6)
25 73
210 400(400 600) 27
55
o 45
8
NZM1/2-XV4(NZM1/2-XV6) 36 23g0.5
NZM1-XTVD(V)(R)-60 NZM1-XTVD(V)(R)-0
41 75
16 60
NZM1/2-XV...
a Special tip
Minimum door coupling rotary handle clearance from door pivot point
NZM...1-... f 130
108 Dimensions
Size 1: accessories
NZM1-XS, NZM1HIV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
51.5
2-5 12 129
12 2-5 129 15
73.5 95-310 90
90 95-310 73.5
Main switch assembly kit for side panel mounting with mounting bracket
NZM1-XS(R)M-L NZM1-XS(R)M-R
NZM1/2-XZB
145
145
NZM1/2-XZB
12 2-5 131.4
2-5 12 131.4
57.2 73.5 176
73.5 57.2 176
163 178.5
163 178.5
195.5
195.5
Undervoltage release
Shunt release
Early-make auxiliary contacts
20 20 23.2 a
NZM1-XA(HIV)
NZM1-XU(HIV)(20)
NZM1-XHIV
39.3
39.3
b
NZM1-XA(HIV)(L)
38.6
a c NZM1-XU(V)(HIV)(L)(20)
NZM1-XHIV(L)
b c
NZM1-XHIVR
35
17.5
126
145
157
30 1.5
90 8.4
Dimensions 109
Size 1: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM-X
Circuit-breakers, switch-disconnectors
Insulating surrounds
NZM1-XBR a Mounting aperture
9.5
1.5 5
ZFS...-NZM7
53
64
82
132
117 23 11.5
148.5 19
53
132
11.5
19
a
46.3
145
F 80
117 a 115
148 b
a NZM1-XRAV(R)
d
b NZM1-4-XRAV(R)
b
d=48
b f 34
a Up to 3 padlocks
110 Dimensions
Size 1: accessories
NZM1-XMV, NZM1-XTV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Mechanical interlock
NZM1-XMV + NZM1-XDV(R)
29.2
80.3
51
27
45
22.5
31
7
45 5
90 40
120 143 40
NZM1-XMV + NZM1-XTVD(V)(R)
Part no. x
NZM1/2-XV4 (NZM1/2-XV6)
NZM1/2-XV4 245 400
NZM1/2-XV6 400 600
NZM1/2-XV... a
163 202
202 245
a Special tip
Dimensions 111
Size 1: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM1-XCI, NZM1-XAD
Circuit-breakers, switch-disconnectors
Insulated enclosures
NZM1-XCIK5-T... NZM1-XCI23-T...
280
250
8
8
200 160
187.5 175
231
246
NZM1-XCI43-T... NZM1-XCI43/2-T...
60
60
495
375
375
495
8
8
80 60 80 60
246 296
Component adapter
NZM1-XAD160
200
90 65.5
112 Dimensions
Size 1: accessories
NZM1-XFI, PFR- Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Residual-current relay
PFR-003 5 6 7 8
PFR-03
PFR-5 a
85
67
45
1 2 3 4
36 44
68
73
Current transformer
PFR-W-2030 PFR-W-35...210
F Part no. A B C D E F
PFR-W-35 100 79 26 48.5 35 35
I PFR-W-70 130 110 32 66 70 52
G
J
F G H I J
PFR-W-20 32 60 24 46 21
46
PFR-W-30 32 70 30 59 30
6.5
F
C D
Fixing clip
PFR-WC PFR-WMA
Part no. A B C A1 A2
PFR-WMA-35 91 28 40 35 28
oB
oC
PFR-WMA-70 105 62 75 35 35
51.7
32.7
Residual-current release
NZM1(-4)-XFI...R
80.1
68
145
145
220
45
220
42.5
135 105
NZM1(-4)-XFI...U
80.1
68
23.1
145
145
45
42.5
120 90.15
Dimensions 113
Size 2: Basic units
http://catalog.moeller.net Moeller SK1230-1177GB LZM2, LN2
Circuit-breakers, switch-disconnectors
Circuit-breaker 149
3 pole 103
LZMB2 35
NZM...2-...(C)NA 25 5
b
LZMC2
a
f 35
LN2 M8 x 22
11
19.5
24.5
3
4
80
R 12
95
184
145
135
100
64
72.5
217
M4 x 85/20
f 35
a SW5 b 78.7
35
f5 105 f 5 NZM...2-...-(C)NA(> 480 V)
NS2-...-NA
a Blow out area, minimum distance to other parts f 35 mm
b Minimum distance to adjacent parts f 5 mm
Circuit-breaker 149
4 pole 103
LZMB2-4
LZMC2-4 b a
70 25 5
f 35
LN2-4 M8 x 22
19.5
24.5
3
80
24
R1
95
N
145
135
184
100
72.5
SW5 M4 x 85/20
f 35
35 78.7
a b
f5 140 f5
SW 8
M10
55
37
SW 5 M8 x 22
20
111
80
80
SW 5
105 a
140 b
105 a
140 b
a 3 pole
b 4 pole
Covers Control circuit terminal
NZM2(-4)-XKSA NZM2-XSTS
Cable lug NZM-XSTK
NZM2-XKS185
IP2X protection against contact with a finger for shroud
NZM2(-4)-XIPA
100
SW 5 M8 x 22
80
105
337
105 a
175
140 b
81
105 a 87
140 b
a 3 pole
b 4 pole
Dimensions 115
Size 2: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM2-XKR, NZM2-XDV, NZM2-XDTV
Circuit-breakers, switch-disconnectors
Connection on rear
(+)NZM2(-4)-XKR(O)(U)
35 35 35
SW 4 o 22
80
80
72
160
145
100
10 10 48
18
M4
105 35 17.5
o 8.6
140 70
35 35
M8 x 30
o 30
o 20
6
80
72
145
160
M4
18
35
Rotary drive
Rotary handle on circuit-breaker
NZM2-XDV NZM2-XDTV
NZM2-XDVR NZM2-XDTV2 d
b
a d=48
b f 34
a Up to 3 padlocks
F 67
75
59
100
95
R4
6
52
104
140
116 Dimensions
Size 2: accessories
NZM2-XTV, NZM1/2-XV4(6) Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
73.5
d
27.5
b
d=48
8 b f 34
a Up to 3 padlocks
ZFS...-NZM7
o8
23
40
85
71
o
R4
6
71
85
25
a
35
55
o 45
17
NZM1/2-XV4(NZM1/2-XV6) 36 23g0.5
Dimensions 117
Size 2: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM2-XTVD, NZM2-XS
Circuit-breakers, switch-disconnectors
Door coupling rotary handle with extension shaft
NZM2-XTVD(V)(R)-60 NZM2-XTVD(V)(R)-0 Minimum door coupling rotary handle clearance from door
pivot point
16 60 41 75
NZM...2-... f 130
NZM1/2-XV...
a Special tip
2-5 0.5
73.5 95-310 105 170.5
NZM2-XS(R)-R
41
51.5
0.5 2-5 15
105 95-310 73.5 170.5
118 Dimensions
Size 2: accessories
NZM2-XS, NZM2-XRAV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Main switch assembly kit for side panel mounting with mounting bracket
NZM2-XS(R)M-L
NZM1/2-XZB
185
NZM2-XS(R)M-R
185
NZM1/2-XZB
0.5 2-5 172.1
47.2 73.5 216
168 218.5
200.5
Rear drive
NZM2-XRAV
184
133 a 145
168 b
a NZM2-XRAV(R)
b NZM2-4-XRAV(R)
Dimensions 119
Size 2: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM-XAB, NZM2-XBR, NZM2-XDTV
Circuit-breakers, switch-disconnectors
Spacers Clip plate
NZM1/2-XAB NZM2-XC75
17.5 2
130
169
NZM1/2-XAB
35 17
120.5 105
Insulating surrounds
NZM2-XBR
9.5 a Mounting aperture
1.5 5
ZFS...-NZM7
103
132
64
142
127
10
158.5 23
17.5
NZM2-XDTV(R) o4
a
9
63
103
142
10
17.5
120 Dimensions
Size 2: accessories
NZM2-XKAV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
b
d=48
b f 34
1.3
a Up to 3 padlocks
a
92.5
F 88
Part no. a
LZM2, LN2 52.5
LZM3, LN3 70
Dimensions 121
Size 2: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM2-XMV, NZM2-XTVD, NZM2-XD
Circuit-breakers, switch-disconnectors
Mechanical interlock
NZM2-XMV + NZM2-XD
36
73
75
50
95
47.5
50
50 9.6
52.5 6
105 41
140 180 46
NZM2-XMV + NZM2-XTVD(V)(R)
NZM1/2-XV4(6)
Mechanical interlock
NZM2-XMV + NZM2-XTVD(V)(R)-60 NZM2-XMV + NZM2-XT(V)D(V)(R)-0
a
NZM1/2-XV...
a Special tip
122 Dimensions
Size 2: accessories
NZM2-XR Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Remote operator
NZM2-XR...
322.8 a Up to 3 padlocks
235.5 b Remote operator hinged
35 135
d
NZM2-XAVPR
b
d=48
b f 34
7.2
21.5
F 13.7
105
a
250
105 52.5
b
105
140
Dimensions 123
Size 2: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM2-XCI, NZM2-XAD, NZM2-XSV
Circuit-breakers, switch-disconnectors
Insulated enclosures
NZM2-XCI43-T... NZM2-XCI45-T...
60
80
17
375
495
17
500
660
187.5
250
80 60
250 225
296
190 60
375 225
296
Component adapter
NZM2-XAD250
20
145
190
145
20
35 63
35 35
106
Plug-in units
+NZM2(-4)-XSV
190.5
92.3
87.5 148.3
35 25
15.7
M8 x 22
67.1
NZM2(-4)-XSVS
57.5
109.7
396
184
241
237
205
NZM2(-4)-XSVE
M4 x 93
SW5
M4 x 85
35 78.7
105
140
124 Dimensions
Size 2: accessories
NZM2(-4)-XFI, NZM-XDMI, UVU-NZM Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Residual-current release
NZM2(-4)-XFI...
252
265
291
29.5 22
22
22
22
29.5
29.5
87.7
70 6 103
35 108
140 149
60
50
M4 X 16
100 115 85
Dimensions 125
Size 3: Basic units
http://catalog.moeller.net Moeller SK1230-1177GB LZM3, LN3
Circuit-breakers, switch-disconnectors
Circuit-breaker
3 pole 166
LZMC3 120.5
NZM...3-...-4(C)NA
LZMN3
b
a
LN3 45 31 5
f 60
20.5
11
M10 x 30
28 29.5
135
R 205
123.5
95
216
234
275
315.5
117
SW5 M5 x 75
f 60
45 69.7
b
a
f5 140 f5
Circuit-breaker
4 pole 166
LZMC3-4 120.5
LZMN3-4
b a
LN3-4 90 31 5
f 60
20.5
M10 x 30
28 29.5
135
123.4
R 205
N
95
234
216
275
117
SW5 M5 x 75
45
f 60
69.7
a b
f5 185 f5
M12
SW 8
25
35 25
SW 8 SW 8
80
M10 x 30
172
124
124
SW 5
140
185
140
185
M10 x 30
148
SW 8
124
149
459
140 a
253
185 b
96
140 103
185
a 3 pole
b 4 pole
Dimensions 127
Size 3: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM3XK
Circuit-breakers, switch-disconnectors
Connection width extension
NZM3(-4)-XKV70
Terminals 70 70
NZM3(-4)-XK22X21 45 26.5 37 24
NZM3(-4)-XK300 33 70 70 70 6
43 20 50 18 50 6
o 13
a
M10 x 30
o 6.4
5.75
11.5
28
123.5
401
616
295
401
433
433
295
200
b
45 45 45 45 45 49
140 24 185 36.5
188 258
255 325
a NZM3(-4)-XK22X21
b NZM3(-4)-XK300
Connection on rear
(+)NZM3(-4)-XKR(O)(U)
45 45 45
SW 8 o 30
123.5
124
117
247
234
112
11 11 57
22
140 35 M5
o 11 90
185
M10 x 35 45 45
o 28
o 30
10
124
117
234
247
M5
22
45
128 Dimensions
Size 3: accessories
NZM3-XKP, NZM3-XAB, NZM3-XBR Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Phase isolators
NZM3-4-XKP
616
599
200
161.6
3.5 100
45
90
210
255
138 9.5
17.5 1.5 5
ZFS...-NZM7
110
132
64
NZM3-XAB
177
162
193.5 23
10
17.5
Dimensions 129
Size 3: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM3-XDV, NZM3-XTVD
Circuit-breakers, switch-disconnectors
Rotary drive
Rotary handle on circuit-breaker
NZM3-XDV
NZM3-XDVR a
d
b
d=48
b f 34
a Up to 3 padlocks
105
F82.6
7
R8
124
95
140
185
ZFS...-NZM7
o8
23
40
85
71
o
R87
71
85
25
35
d
b
d=48
b f 34
a Up to 3 padlocks
130 Dimensions
Size 3: accessories
NZM3-XTVD Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
25 95
X 27
8
59
o 60
32.5
36 23g0.5
NZM3/4-XV4(6)
29
Part no. x
NZM3/4-XV4 270 400
NZM3/4-XV6 400 600
NZM3-XTVD(V)(R)-60 NZM3-XTVD(V)(R)-0
18 60
42 77.5
NZM3/4-XV... a
a Special tip
Minimum door coupling rotary handle clearance from door pivot point
NZM...3-... f 180
Dimensions 131
Size 3: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM3-XS
Circuit-breakers, switch-disconnectors
Main switch assembly kit for side panel mounting
NZM3-XS(R)-L
105
25 86 433 195
95 25
NZM3-XS(R)-R
105
39.1 24.1
86 433 25 195
95 25
132 Dimensions
Size 3: accessories
NZM3-XMV, NZM3-XTVD, NZM3-XDV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Mechanical interlock
NZM3-XMV + NZM3-XDV(R)
34.5
105
73.2
50
95
47.5
50
96.5
20
99 5
140 40
185 196 69
NZM3-XMV + NZM3-XTVD(V)(R)
NZM3/4-XV4(NZM3/4-XV6)
a
NZM3/4-XV...
a Special tip
Dimensions 133
Size 3: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM3-XCI, NZM3-XAD
Circuit-breakers, switch-disconnectors
Insulated enclosures Component adapter
NZM3-XCI48-TD NZM3-XAD550
80
270
229
32.5
910
750
45 45 38
375
140 63
29 60
190 275
375 369
134 Dimensions
Size 3: accessories
NZM3-X Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Remote operator
NZM3-XR...
358
d
b
260.5 d=48
b f 34
60.5 143.5
a Up to 3 padlocks
NZM3-XAVPR
5.5
10
17
28
F 13
140
a
95
291.5
b
140 70
140
185
Withdrawable unit
+NZM3(-4)-XAV
309 d
299 e
271 f
225.5 5
91
25
175.8
171
30
R1
200
341.6
313.5
170.8
130
151.8
c
25
SW 8 M10 x 30
45 31
96 400
200 a 520
227 a
250 b
272 b
a 3-pole d withdrawn
d
b
Circuit-breakers, switch-disconnectors
Circuit-breaker
3 pole
LZMN4 207
LN4 204 138
70 33 8
ba
f 100
44
108
119
171.5
180
313
401
117
21
87.5
F
15
o 10.5 M5 x 110
b
15
45 25 100 100
f 15 70 f 15
210
Circuit-breaker
4 pole
LZMN4-4 207
LN4 138
33 8
140
b
a
f 100
44
108
119
171.5
180
21
117
313
401
N
87.5
15
M5 x 110
o 10.5
b
15
100 100
45 70 25
f 15 f 15
280
53 32
c
108.5
f 100
4 x SW8
73.5
25
M10 x 60
2 x SW16
30.5
531
171.5
210 a
280 b
210 a
280 b
a 3 pole
b 4 pole
c Clearance from conductive parts f 100 mm
Dimensions 137
Size 4: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM4-XKM
Circuit-breakers, switch-disconnectors
Screw connection
Module plate Flat cable terminal Part no. a b
Single hole NZM4(-4)-XKB NZM4(-4)-XKM1 36 47
NZM4(-4)-XKM1 NZM4(-4)-XKM2 32 40
2-hole NZM4(-4)-XKB 47
NZM4(-4)-XKM2
43 40 50 a 3 pole
43 b 4 pole
25
c Clearance from conductive parts f 100 mm
SW16
a
NZM4-XKM1
171.5
210 a
280 b
Module plate
2 holes, vertical
NZM4(-4)-XKM2S...
33
o 13
70 70 70 70 70 x
o 13
16
16
M 10 x 50
32
32
SW16
171.5
486
518
486
518
50 50
210 280
Part no. x
NZM4(-4)-XKM2S-1250 12
NZM4(-4)-XKM2S-1600 20
138 Dimensions
Size 4: accessories
NZM4-XKV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
M10 x 50
15
15
SW16
171.5
543
573
543
573
30 30
210 28.5 210 41
267 292
NZM4-4-XKV95 NZM4-4-XKV120
95 47.5 47.5 95
18 18 18 122 122 122
48
50 77 80 42 42 42
o 11 15
30 o 11 50
M10 x 50
15
15
171.5
543
573
595
625
30 18 30
41 280 83
362 446
Dimensions 139
Size 4: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM4(-4)-XKP, NZM4(-4)-XKR
Circuit-breakers, switch-disconnectors
Connection on rear
NZM4(-4)-XKR Fitting on mounting plate
278
139 Rear connection possible also with
rotation by 90.
SW16
a 3 pole
M10 x 30
b 4 pole
72
172
180
411
88
30
15
M5
206
9.5
210 a 16
70
280 b 3-5
140
208
o 11
104
25
45
72
180
411
87.5
M5
205.5
35
70
Phase isolators
NZM4-4-XKP
190
3.5 114
70
140
140 Dimensions
Size 4: accessories
NZM4-XDV, NZM4-XTVD Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
221.5
a
f 89.5
73.5
R 137
117
58.5
60.5
162
210
280
d
b
d=48
b f 34
a Up to 3 padlocks
ZFS...-NZM7 18
o8
23
40
71
85
85 R1
37 71
a
a Up to 3 padlocks
d
b
d=48
b f 34
Dimensions 141
Size 4: accessories
http://catalog.moeller.net Moeller SK1230-1177GB NZM4-XTVD, NZM4-XV, NZM4-XS
Circuit-breakers, switch-disconnectors
Door coupling rotary handle with extension shaft
NZM4-XTVD(V)(R)
NZM3/4-XV4(6)
300 400(400 600)
25 95
5 27
59 8
o 60
21
36 23g0.5
NZM3/4-XV4(NZM3/4-XV6)
57
NZM4-XTVD(V)(R)-60 NZM4-XTVD(V)(R)-0
18 60 42 77.5
NZM3/4-XV... a
270 312 23g0.5 234.5 270 23g0.5
a Special tip
Minimum door coupling rotary handle clearance from door pivot point
NZM...4-... f 180
86 433 34.1
25 24.1
221.5
100
142 Dimensions
Size 4: accessories
NZM4-XBR, NZM4-XMV, NZM4-X Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Insulating surrounds
NZM4-XBR
9.5 a Mounting aperture
1.5 5
ZFS...-NZM7
a
154
125
64
246
231 23
262.5
10
17.5
Mechanical interlock
NZM4-XMV + NZM4-XDV(R)
34.5
221.5
73.2
50
95
50
47.5
20
5
162 40
210 230 69
280
NZM3/4-XV4(NZM3/4-XV6)
NZM3/4-XV...
Circuit-breakers, switch-disconnectors
Mechanical interlock
NZM4-XMV + NZM4-XTVD(V)(R)-0
270 305
a Special tip
Remote operator
NZM4-XR
435.2
313.4
175.4
12.5
204 F13.4
19.4
306.4
45.5
55.6
189
454.4
117
a
84.4
189.5 189.5
208 208
210 280
d
b
d=48
b f 34
a Up to 3 padlocks
Remote operator folded
144 Dimensions
Size 4: accessories
NZM4-XAV Moeller SK1230-1177GB http://catalog.moeller.net
Circuit-breakers, switch-disconnectors
Withdrawable unit
+NZM4-4-XAV
353.5 d
341 e
313 f
243 8
M6 x 12
25 25
217
274.5
30
R1
300
509
451
c
25 25
70 131 33
275 560
297 a 680
350
367 b
a 3-pole d Disconnected
d
b 4-pole e Test
b
d=48
b f 34
f Connected
c Up to 3 padlocks