Académique Documents
Professionnel Documents
Culture Documents
Introduction
This document contains information on packaging material, which is the main constituent in Tetra Pak
packages. For information on other package constituents such LS strip, ReCap etc.; see
separate documentation about additional material.
The information contained is related to functional properties and dimensions which are important for
the forming and filling of packages, and for the requirements on the packages.
The packaging material is of multi-layer structure, delivered in reel format. Material components and
grammage of layers are continuously developed for optimal performance at minimum resource utilisation,
following technical developments with our suppliers and in our factories. The customer shall be informed
about any relevant changes.
This information is disclosed in a faith of trust between Tetra Pak and the customer and must not be
disclosed to a third party without consensus of the two parties.
This specification is valid when completed customer name, Tetra Pak Market Company and Factory, and
with the person respectively.
The supplying converting factory stores quality documents for 5 years to ensure possibility to trace production
data for the material.
The Artwork Keyline (incl reference to package variants) is available from the local Tetra Pak design department
if required.
Approval
Date:
Tetra Pak 2017 Factory issue no. 141 Issue date: Page 5 (4)
Name:
Position:
Company:
TETRA PAK
DIMENSION UNIT NOMINAL VALUE TOLERANCE TEST METHOD
Structure
Nominal value (g/m2)
Outside PE layer 12
TBA
Printing inks 250
Paperboard
Lamination PE layer 20
Aluminium foil 17
Adh PE and mPE layer 30
Test method I 003.1 Total grammage 79 +
Tetra Pak 2017 Factory issue no. 141 Issue date: Page 6 (4)
Weight (g) of packaging material per
package, excl. strip and opening device: 2,7 + 0,0
Reel information
PROPERTY UNIT JUMBO SMALL/MINI
*) Reels with reduced no. of packages may be delivered depending on order size and manufacturing
conditions.
Distribution
PROPERTY JUMBO SMALL
No. of reels/pallet
Pallet type 1150 x 1150 mm
Pallet material The pallets are made of untreated wood, free from chemicals.
A protection sheet should be used between the pallet and the materials.
Pallet wrapping Each pallet is protected with hood of shrink or stretch film.
Pallet stacking Pallets can be stacked on top of each other, maximum 4 pallets with a maximum total
Tetra Pak 2017 Factory issue no. 141 Issue date: Page 7 (4)
height of 5.3m. A protection sheet is strongly advised to be used between the pallets.
In EU Under FDA
For all liquid foods packed under ambient or hot-fill No restriction l
conditions up to 100C followed by long-term storage
at ambient temperature
Tetra Pak 2017 Factory issue no. 141 Issue date: Page 8 (4)