Académique Documents
Professionnel Documents
Culture Documents
i) MA01(Sampling Method)
ii) MA02(BOD)
iii) MA03 (Total Suspended Solid-TSS)
iv) MA04 (Bacteria Count)
v) MA05 (JAR Test)
2) Penerangan ujikaji
i. Sampling Method perlu mengambil kira penggunaan/keperluan keselamatan
pengendalian makmal semasa berada di makmal mahupun di lokasi
persampelan.
ii. Ujian BOD hanya diukur pada hari 0 dan hari ke-5 pada suhu 20 C. Sekiranya
pada hari ke-5 jatuh pada hari cuti, maka pelajar hendaklah ukur bacaan pada
hari berikutnya dan data yang diperoleh dianggap data hari ke-5.
iii. Ujian TSS hanya mengukur nilai total suspended solids,.
iv. Ujian Bacteria count hanya menggunakan kaedah spread plate sahaja.
v. Open ended approach adalah bagi Ujikaji Jar Test
3) Lokasi Persampelan
Disediakan oleh,
En. Mohd Baharudin Ridzuan
Penyelaras BFC 32501/ Sem 1/ 2017/2018
ENVIRONMENTAL & TRANSPORTATION
ENGINEERING LABORATORY
Subject Code/
BFC 32501/ Sem 1 2017/2018
Session
Section
1.
Group Members
2.
3.
4.
5.
Lecturer / Instructor
Name
Submission Date
CLO 1: Report/
Presentation/ 20%
Team work
CLO 2: Report/
Marks Presentation/ 40%
Team work
pH of sample : _____________
Sample 1
Sample 2
Sample 3
Blank 1
Blank 2
pH of sample :_________________
4.3 MA03 : Total suspended solid (TSS)
1/10
1/100
1/1000
1/10000
1/100000
Differentiate the water quality of sample with the quality of similar sample as
measured from previous research (refer to any final year project, conference
paper or journal). What is the similarity or significant changes.
Compare the observed water quality (from laboratory activities) to Effluent
quality standard. In your opinion, is it possible to discharge the sample used
in this laboratory measurement test to be discharged to the river?. Give your
reason
6. REFERENCES
7. APPENDIXES
The images with brief explanation on each laboratory works (MA01 to MA05)
(1 sheet for one laboratory work)
Lab Report Assessment Rubrics
Faculty: FACULTY OF CIVIL AND ENVIRONMENTAL ENGINEERING
Programme: BACHELOR OF CIVIL ENGINEERING WITH HONOURS
Course/Code: ENVIRONMENTAL & TRANSPORTATION LABORATORY/ BFC32501
Assessed by:
Section:
Student 1.
names: 2.
3.
4.
5.
Excellent
V.Poor
Good
Poor
Fair
CLO 1: Explain the important of safety in laboratory/chemical handling based on JKKP/OSHA etc. [PLO4, C1,C2]
Total /20
CLO 2: Display high quality of technical and interpretation skills in solving the assign problems. [PLO2, P4]
Assessment Criteria Sub-criteria Level 1 2 3 4 5 Weight Score
Descriptions of the lab work needs P1 2
Perform on-site lab work Correct use of measurement technique and
P2 2
equipment
Report Discussion on the Describe correct and precise data collection P2 2
applications of the lab
work with measurement Analyse and discuss the data trends and
techniques and equations P3 2
patterns using correct graphs
Total /40
CLO 3: Describe the laboratory testing procedures among group members throughout the experiments. [PLO5, A2]
Total (%)
Assessor signature/ date: