Académique Documents
Professionnel Documents
Culture Documents
WARNING WARNING
PERSONAL INJURY MISUSE OF DOCUMENTATION
DO NOT USE these The information presented in this product sheet is for reference only. Do
products as safety or not use this document as a product installation guide.
emergency stop devices or Complete installation, operation, and maintenance information is provided
in any other application in the instructions supplied with each product.
where failure of the Failure to comply with these instructions could result in death or
product could result in serious injury.
personal injury.
Failure to comply with
these instructions could
result in death or serious
injury.
ELECTRICAL CHARACTERISTICS
Parameter 24 C 2 C 0 C to 75 C Unit Conditions
[75.2 F 2 F] [32 F to 167 F]
Min Max Min Max
Supply Current 11.0 12.0 mA 28 V 0.5% supply
Output Voltage
#1 Sourcing 5.0 6.0 mA Switch magnetically operated:
#2 Sinking 0 0.2 No load 28 V 0.5% supply.
#1 Sinking 0 0.2 Switch magnetically released:
#2 Sourcing 5.0 6.0 No load 28 V 0.5% supply.
Leakage (sink) 1.0 1.0 A Apply voltage 0.2 V greater than measured
output source voltage measure current, no load
28 V 0.5% supply.
Output Current
#1 Sourcing 4.0 6.5 3.75 6.4 mA Apply 2 V to output and measure current. Switch
#2 Sinking 2.8 4.7 2.4 4.4 magnetically operated, no load 28 V 0.5%.
#1 Sinking 2.8 4.7 2.2 4.4 Apply 2 V to output and measure current. Switch
#2 Sourcing 4.0 6.5 3.75 6.4 magnetically released, no load 28 V 0.5%
OUTPUT AMP
6V SOURCE
660
IO
510
SINK
+V
S VOLTAGE
REGULATOR
GND
OUTPUT
AMP IO
1
#1
AMP INTERFACE
HALL
AND CIRCUIT
SENSOR
TRIGGER
OUTPUT
AMP IO
2
#2
2X 45
3,66
[0.144]
5,08
[0.200]
SS42R
3,56 1
NS
2,41 [0.140]
0,127 MAX PLASTIC
[0.095]
[0.005] FLASH
2,01 2
[0.079] 4X 0,38
12,7
[0.500] [0.015]
4X 0,64 MAX 2
VS 01 02 GND
[0.025]
4X 0,38
[0.015]
4X 0,38
[0.015] 3X 1,27 0,76
[0.050] [0.030]
ORDER GUIDE
Catalog Listing Description
SS42R Active High/Active Low Complementary Output
Hall-effect Latch
WARRANTY/REMEDY
Honeywell warrants goods of its manufacture as While we provide application assistance personally,
being free of defective materials and faulty through our literature and the Honeywell web site, it
workmanship. Contact your local sales office for is up to the customer to determine the suitability of
warranty information. If warranted goods are the product in the application.
returned to Honeywell during the period of coverage, For application assistance, current specifications, or
Honeywell will repair or replace without charge those name of the nearest Authorized Distributor, contact a
items it finds defective. The foregoing is Buyers nearby sales office. Or call:
sole remedy and is in lieu of all other warranties, 1-800-537-6945 USA/Canada
expressed or implied, including those of 1-815-235-6847 International
merchantability and fitness for a particular FAX
purpose. 1-815-235-6545 USA
Specifications may change without notice. The INTERNET
information we supply is believed to be accurate and www.honeywell.com/sensing
reliable as of this printing. However, we assume no info.sc@honeywell.com
responsibility for its use.