The result indicate that function of every devices and how to handle it.
2)Compare the expected results with the experimental results.
At the beginning of the experiment, the result expected should be
exactly as the experimental result. However, due to some error while using the instruments the experimental result is slightly different than the expected result.
3)Relate the result with objectives.
We were motivated and exposed to the laboratories environment with
safetyprecautions in the laboratories. We also exposed to equipment/ components and electronic and electrical symbols.
4)Analyse what caused the errors.
One reason that it is impossible to make exact measurements is that the
measurement is not always clearly defined. Besides, Parallax(systematic or random). This error can occur whenever there is some distance between the measuring scale and the indicator used to obtain a measurement. If the observer's eye is not squarely aligned with the pointer and scale, the reading may be too high or low (some analog meters have mirrors to help with this alignment).
CONCLUSION
From this experiment, we are able to understand main objective of this
experiment. Besides, we also can state the safety precautions in the laboratories. Thus, we can also identify the function of equipment and draw their electronic and electric symbol. Last but not least, we are able to understand between schematic diagram and pictorial diagram. Reference