Académique Documents
Professionnel Documents
Culture Documents
Zuverlssigkeit
durch Qualitts-
management
Reliability
by quality
management
Reliability by quality management - ISO 9001
Pipes / Hollow Bars / Bars
National foreword
11.2007_1.000
standards committee iron and steel (EFS).
Modifications
Compared to DIN 2462-1:1981-03 and DIN 2463-1:1981-03
were made following changes:
Earlier editions
DIN 2462-1: 1969-03, 1981-03
DIN 2463-1: 1969-03, 1981-03
Foreword 3 Dimensions
The text of the international standardisation of ISO/TC 5 fer- The external diameter and the wall thickness, the of this Euro-
rous metal pipes and metallic fittings of the international orga- pean norm specified tubes, were chosen by ISO 4200 (1). If a
nisation for standardisation (ISO) was assumed as European wall thickness bigger than 14,2 mm is required, you have to
standardisation by the technical committee ECISS/TC 29steel choose it also by ISO 4200.
tubes and fittings for steel tubes, which secretariat was unex-
pended from UNI.
4 Limiting sizes
This European standardisation have to achieve the status of a The for the external diameter and the wall thickness of the
national standardisation, either by a publication of a identical tubes acceptable limiting sizes are dependent on the manufac-
text or by approval till October 1996 and any opposed national tured steel grade and heat treatment. The limiting sizes you
norms have to be retired till October 1996. have to chose of the denoted values on table 1 and 2.
Accordant to the CEN/CEN ELEC- by-laws the following named
national standardisations, have to adopt this European norms: 4.1 Limiting sizes for the external diameter
Belgium, Denmark, Germany, Finland, France, Greece, Ireland, see table 1
Iceland, Italy, Luxembourg, Netherlands, Norway, Austria, Portu- Table1. Limiting sizes for the external diameter
gal, Spain, Sweden, Switzerland and the united kingdom.
limiting sizes for the
tolerance class
external diameter
Approval-note D1 1,50 % mit min. 0,75 mm
The text of the international standardisation ISO 1127:1992 was
www.rofi.de
allowed of CEN as European norm without any alteration. D2 1,00 % mit min. 0,50 mm
D3 0,75 % mit min. 0,30 mm
11.2007_1.000
11.2007_1.000
11.2007_1.000
www.rofi.de
9/17
9/18
Table 3: Usual values of the fibre coarseness of austenitic non-musting steels
external diameter thickness, mm
mm
array
11.2007_1.000
11.2007_1.000
www.rofi.de
9/19
9/20
Tabelle 4. Fortsetzung:
Table 4: Usual
bliche
values
Werte
of the
derfibre
lngenbezogenen
coarseness of Masse
austenitic
austenitischer
non-musting
nichtrostender
steels Sthle
11.2007_1.000
11.2007_1.000
Annex A (informative)
bibliography
(1) ISO 4200:1991
Plain and steel tubes, welded and seamless General tables of dimensions and masses per unit length.
www.rofi.de
9/21
S TA I N L E S S S T E E L
www.rofi.de
S TA I N L E S S S T E E L
South
www.rofi.de
Karl-Arnold-Strae 7
D-73230 Kirchheim/Teck
Tel. +49 (0) 70 21 94 35-0
Fax +49 (0) 70 21 5 60 31
kirchheim@rofi.de
North Export
South
Mittelgnrather Strae
Karl-Arnold-Strae 7 15
D-42655 Kirchheim/Teck
D-73230 Solingen
Tel. +49 (0) 70
2 12
21294
3235-0
54-0
Fax +49 (0) 70
2 12
212532
6054-11
31
solingen@rofi.de
kirchheim@rofi.de
North
MiddleExport
Mittelgnrather
Ostendstrae 3 Strae 15
D-42655
D-63110 Solingen
Rodgau-Niederroden
Tel. +49 (0) 2
6112
062232
8554-0
79-30
Fax +49 (0) 2
6112
062232
2254-11
08
solingen@rofi.de
rodgau@rofi.de
Middle
East
Ostendstrae
Reuterstrae 23
D-63110
D-99867 Rodgau-Niederroden
Gotha
Tel. +49 (0) 61
36 06
21 2
7 85
33 79-30
97-0
Fax +49 (0) 61
36 06
21 2
7 22
33 08
97-10
rodgau@rofi.de
gotha@rofi.de