0 évaluation0% ont trouvé ce document utile (0 vote)
160 vues1 page
The document is a bit condition chart used to record information about the condition of drill bits, including the wear characteristics of the inner and outer rows of cutters, dullness characteristics, gauge wear, bearing seal condition, and the reason for pulling the bit. Key information recorded includes wear location and severity, damage types such as broken cutters or erosion, bearing life used, and common reasons for needing to replace the bit such as changing drill string components or reaching total depth.
The document is a bit condition chart used to record information about the condition of drill bits, including the wear characteristics of the inner and outer rows of cutters, dullness characteristics, gauge wear, bearing seal condition, and the reason for pulling the bit. Key information recorded includes wear location and severity, damage types such as broken cutters or erosion, bearing life used, and common reasons for needing to replace the bit such as changing drill string components or reaching total depth.
The document is a bit condition chart used to record information about the condition of drill bits, including the wear characteristics of the inner and outer rows of cutters, dullness characteristics, gauge wear, bearing seal condition, and the reason for pulling the bit. Key information recorded includes wear location and severity, damage types such as broken cutters or erosion, bearing life used, and common reasons for needing to replace the bit such as changing drill string components or reaching total depth.
BC Broken Cone BHA change BHA BT Broken teeth/Cutter DMF Downhole motor failure BU Balled up DSF Drill string failure CC Cracked Zone DTF Downhole tool failure CD Cone Draged LOG Run Logs CI Cone Interference RIG Rig Repaire CR Cored CM Condition Mud CT Chipped teeth/cutters CP Core Point ER Erosion DP Drill Plug FC Flat Crested wear FM Formation Change HC Heat Checking HP Hole Problem JD Junk Damage HR Hours LC Lost Cone PP Pump Pressure LN Lost Nozzle PR Penetration Rate LT Lost Teeth/Cutter TD Total Depth/Csg Depth OC Off cutter wear TQ Torque PB Pinch Bit TW Twist off PN Plugged Nozzle/Flow Passage WC Weather condition RG Rounded Gauge WO Wash out drill string RO Ring out SD Shirttail Damage SS Self Sharpening Wear TR Tracking WO Wash out Bit Location: WT Worn teeth/cutter C Cone NO No major/other dull caharcteristic N Nose (Show cone number(s) under LOCATION) T Taper Note : If no dull characteristic is visible, mark S Shoulder this space NO. If no Other Characteristic is G Gage visible mark this space NO. A All areas/row Gauge wear: M Middle row 1 in gage H Heel Row 1/16 under gauge up to 1/16 # - Cone number 2/16 under gauge 1/16 2/16 3/16 under gauge 2/16 3/16 4/16 under gauge 3/16 4/16